COA qtys are not printing in wt field. I believe a cert Prof is being used.

How should I approach pinpointing this issue? Any suggestions? Output type COA.

I use a FW-drive on my MBpro when I work in the
field. When I come back to the office I use
Chronosync to synchronize my libraries on my FW-drive
and my G5.
Works like a charm...
A note of caution about this approach, it should work just fine moving from one computer to another and then back again.
However if you synchronize a Laptop, and then do some editing on a desktop before you resynchronize back from the laptop you may loose some changes. This is because Chronosync will use the most recent version of the Aperture database (held within the Aperture library) and whichever one is newest will be the one to be used. While all changes you make are also held in Sidecar files if Aperture encounters a difference between the sidecar files and the database the database is always more trusted and the other changes would be discarded.
This is probably more likely a problem to happen the other way, you forget to synchronize the laptop before popping off to the porch for a few quick edits and then come back and try to resynch with the desktop. Just make sure you only ever have one "editing" computer and synchronize to the other computer before you start editing on it.
As for the other question, most backup programs will see Aperture's library as a directory like any other. It's mostly when you are using Finder or the standard Apple file chooser that a package is treated differently.

Similar Messages

Check Proposal is Run but Checks are not Printed-need to cancel the run

The Accounts Payable Check Proposal is Run but Checks are not Printed- I need to cancel the run. How do I do this ?
Points will be awarded.
Thanks.
Kathy

Restart
If the printer stops during printing, for example because of a power failure, you will need to restart
the print program.
1. To do this, choose System   Services   Reporting.
2. Enter the name of the print program (RFFOUS_C) and select Program   Execute.
3. Enter the data identifying the print run and enter the check number from which the
program should be restarted in the Restart field.
4. Select Program   Execute again.
If there is a system crash during the print run but before any checks have been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
If there is a system crash during the print run and some checks have already been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
This error may occur, for example, when a check lot is used up and the next lot has not
been maintained. In this case, the first thing to do after the system crash is to enter a
new check lot. See: Maintaining Check Lots [Page 7]
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
4. Delete the print output from the print management files.
5. Now restart the print program, this time using the restart option, (see above).
PAGE 25 IN CHECK MANAGEMENT PDF FILE FROM HELP.SAP. TO DOWNLOAD CLICK ON BELOW LINK
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-BL-BM-CM.pdf
ASSIGN POINTS IF HELPFUL.

Texts with correct font are not printed

Hi All,
I am printing the Adobe form with some header and item texts.
I have created a style in smartforms so that the texts in the layout would be printed accordingly.
In the context part, I have created the text and assigned the text module. I have also given the style name at the time of creation, checked 'Copy style from text module' also. But still in the layout the texts are not printing with correct font.
Currently the texts are prining with default font which i have declared in style.
Do we need to give the paragraph format or style name anywhere?
Thanks and Regards,
Karthik Ganti.
Message was edited by: Dezso Pap

Hello Karthik,
If font is uniform throughout the text, then no need to create the Smartstyle. You can do this with JavaScript.
1. Click on the text field.
2. Write the below JavaScript in the Initialize event.
this.font.typeface = "Arial";
This will override the default font which you had selected at the design time.
If you want to change the weight, you can also do that as shown below.
this.font.weight = "bold";
Here I have hard coded the font name and weight. If you want to do this dynamically, you can store the font name in a custom table and then assign it in the layout.

Photos are not printing

Photos and graphics are not printing from web browsers.
Is there an OS or Safari setting that makes 10.4.10 print only text from my G4 1000x2 MDD?
Lazerjet 5M, ethernet.
I've looked in the printer dialog and didn't see anything...

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.

Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system. Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good.
Can you help me find and fix the problem?
Thanks

Hi DavidM2,
Welcome to the HP Forums.
I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you are still having issues then try to replace the cartridges.
Let me know how you make out and if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

PL/SQL log messages are not printing from Java concurrent program

Hi,
I have a strange issue while submitting the Java concurrent program through PL/SQL.
I have a PL/SQL concurrent program which will invoke the Java concurrent program inside the package by use of "FND_GLOBAL.SUBMIT_REQUEST". It worked and submitted successfully. From that Java concurrent program we are calling some other PL/SQL packages and printing some log messages over there. But problem here is the request is only printing the Java log messages in view log but not the PL/SQL log messages. But if I submit the Java concurrent program directly from SRS form at that it is printing both Java and PL/SQL log messages.
I am just wondering how the log messages has not printed. Please provide your inputs to solve this problem.
Thanks
Suriya

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Upgraded to CS5 Illustrator form CS3 Illustrator. Colors are not printing correctly in CS5

I have just recently purchased CS5 Premium Suite. I am working with Illustrator. When I print my CS3 Illustrator files in CS5 the colors are not printing correctly. Is there a way to fix this problem

I've been doing more troubleshooting since I wrote this post. I've now tried printing from a non-Adobe app and I'm getting the same margin error. So it is definitely a Xerox issue and I have a tech coming out on Monday.
The reason I originally figured it must be an CS5 issue is because just two weeks ago when I was using CS2, our landscape-oriented programs were printing with .25" margins as they should. Then last week after upgrading to CS5, the inside page (2nd page) was noticeably out of whack and shifted to the right (not left). But when I started trying to troubleshoot this week, everything started shifting to the left.
The only thing different between those two weeks was the fact I updated to CS5.
But obviously, my printer as decided to go to crap in more ways than one all in a two week period. Hopefully the tech can sort it out next Monday.
Thanks!
Christi

Barcodes are not printing

Hi,
We have a printronix printer model Printronix T5304 with the device type added LB_PRI. The requirement is Barcode printing and i have added the 2 Barcodes ZUCC_LA
ZUCC_SP to this device type but still the Barcodes are not printing. Can you suggesst me is there any other device type that i can use to test. I would request you to check the belwo output status also.
Output status: The status of the output request is showing complete and the spool list showing the barcodes but when physically printing barcodes are not printing only numbers are printing. I checked the entry has been correctly updated in print controle area. But not sure how to change the character format to match in the sapscript.
Regards
Dellibabu

Hi Deli
Hope you are using the new bar code technology while creating the barcode in SE73. This could be the possible reason for the barcode not getting printed.
http://help.sap.com/saphelp_nw04/helpdata/en/66/1b45c136639542a83663072a74a21c/content.htm
Hope this helps.
Regards
Neeraj

FND LOG messages are not printing in LOG file for Concurrent program

Hi,
I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');
Thanks.

I'm adding log messages in the package body , but these messages are not printing after completion of concurrent prog.
Any suggestions.
FND_FILE.PUT_LINE(FND_FILE.LOG,'Data Test :');Do you have COMMIT in your code?
https://forums.oracle.com/forums/search.jspa?threadID=&q=%27FND_FILE.PUT_LINE%27+AND+commit&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus

PDF's attached to my emails to HP ePrintCenter are not printing to my HP6500A Plus. The tagline in my email prints, but not the attached PDF. These are unsecured PDF's created by printing to PDFCreator, saving the PDF, then attaching and emailing to HP ePrintCenter.

Hi, what file size is the PDF? (I think the limit could be around 5MB)
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Foreign characters are not printed correctly in Analyzer 6.5.0 and java 1.3.0_02

Hi,I am using Essbase at 6.5.3 level and Analyzer Enterprice edition at 6.5.0 level. The java plug-in is at level 1.3.0_02.Foreign characters are corectly dispalyed in Analyzer java web client, but when I try to print the report the foreign characters are not printed correctly.I have changed the contents of the font.properties file all code pages from 1252 to 1250. The characters are still not printed correctly.How to "force" the Analyzer print the foreign characters to print?Thanks,Grofaty

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Suddenly fonts are not printed

Suddenly writings and sometimes graphics are not printed when I write a postscript file from InDesign and change it with the PDF distiller . There was an update for indesign at the cloud. But can it be that? I always get the expression from the printer: error: invalidfont Offending Command: show stack: () or Error: typecheck Offending Command: rmoveto stack: null null
I'm totally desperate. So far, everything has always worked out well and I do not use any other font :-(
I hope someone can help me. Thanks a lot

If they are anywhere on your system, delete the fonts Times Phonetic and Helvetica Fractions. Then clear out the font cache files with Font Finagler.

Some paragraph tags are not printing when document is printed from Framemaker 10.

So this is really odd. I have a situation where I have a document that I am developing in Framemaker 10 several different paragraph tags are intermittently not printing when the document is physically printed. When I go to print the document from Framemaker 10 to a physical piece of paper some tags are printing partially or not at all. What makes this stranger to me is that when I print the document to a PDF, all of the content and tags show up in the PDF. Then when I try to physically print from the PDF, the tags do no print from that document as well.
Typically the tags that are not printing are those that have been bolded, but are across several different tags. Also the problem is sometimes only to the first line of a tag, where if the tag carries over to a second line in the document, the text on the second line prints. Another quirky instance that shows up is where the text a line will print only parts of the text. The document uses the same type font for the entire document, Helvetica 55 Roman. The font size varies and the coloring varies as well, but this issue is happening for all sizes and colors.
I'm not sure what additional information is important here, but if you need additional information please request it and I will supply it to the best of my ability. I'm a content developer with an intermediate amount of experience with Framemaker.

I'm not sure if this is the same problem, and you didn't mention your
OS, but there was a widespread problem with dropped text in PDF with
Windows XP. A hotfix was issued to fix it. If on Windows XP, you should
install it:
http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
Also, you mentioned that it was "bolded" text that tended to have the
problem. Bolded text is artificially bold and does not use actual bold
fonts. (If I recall, text is double printed at a slight offset to give
the appearance of a bold font.) So there is no bold font to embed. Be
sure you install and use an actual bold font, rather than using the
bolded characteristic, or you could see problems.
This is a stretch, but you also mentioned that some of the problem
sections have colored text. Check the printer properties of your Adobe
PDF virtual printer to make sure someone didn't reassign the driver (on
the Advanced tab). It should be set to use the Adobe PDF Converter
driver (or Acrobat Distiller in older Acrobat versions). Years ago,
people sometimes changed this setting to use other drivers for various
reasons, not realizing that they limited themselves to the capabilities
of that driver. So, if they chose an HP LaserJet PostScript driver, for
example, their documents might no longer be able to be 11"x17" or
color-- because the printer couldn't handle it. The driver was limited
to 8.5"x14" and black-and-white. Perhaps there is a driver set that is
choking on the colored text-- though I would think it would merely
convert it to B&W.
Okay, I've grasped at enough straws.

TDS deducted details are not printing in J1INQEFILE

Dear All,
For all the vendors TDS deducted details are not printing in J1INQEFILE. I would like to get the resolution by any of your valuable inputs.
Thanks,
Saravana

Hi ,
Kindly check this Note 1003736 - J1INQEFILE:Tax rate not appearing in the output.
Hope it helps
SJ

My 4x6 pictures are not printing.

My 4x6 pictures are not printing fully on the 4x6 paper. What do I do?

Hi there,
Could you provide a little more info for the community? Is only part of the picture printing or is there a border that you are trying to get rid of? Also what model printer is this and what operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

COA qtys are not printing in wt field. I believe a cert Prof is being used.

Similar Messages

Maybe you are looking for