COA's with In-process inpection w/o Batch Mgmt

Hi Folks,
We are doing in-process inspection in our system for production. Also, we have no batch management being used. Yet, we've COA's that need to be generated on our finished products before dispatch to our customers.
I've previously used COA's in a Batch Managed & GR Inspection (type 04). Not sure if COA's can be generated for my scenario. Would like to take suggestions from you experts on how do I approach this.
Thanks
Anan

I believe you should be able to generate COA's using the 03 inspection results, but... I've never tested it or tried to do it. But in using 03's there are some issues that you'd have to check on and test out.
I don't think you'll be able to have the same test in the inspection lot more then once. This can happen if you run the same test at different operations of the process. Such as water content which might be tested several times during production. You might also have some issues if you use inspection points. I think it will use the last test result regardless of inspection points. But I'm not 100% sure on that.
You will also to need to make sure there are UD's on the inspection lot. You'll probably want to run the Auto UD for production lots and have it close all lots where the order has a TECO status.
Other then those cautions, it should work similarly to reporting results from an 04 inspection lot.
Craig

Similar Messages

COA's with In-process Inspection & w/o Batch Management

Hi Folks,
We are doing in-process inspection in our system, for production. Also, we donot use batch management. Yet, we've COA's that need to be generated on our finished products before their dispatch to the customers.
I've previously used COA's in a Batch Managed & GR Inspection (type 04) scenario. Not sure if COA's can be generated for my scenario (in-process inspection & no batch mgmt). Would like to take suggestions from you experts on how do I approach this.
Thanks
Anand

I believe you should be able to generate COA's using the 03 inspection results, but... I've never tested it or tried to do it. But in using 03's there are some issues that you'd have to check on and test out.
I don't think you'll be able to have the same test in the inspection lot more then once. This can happen if you run the same test at different operations of the process. Such as water content which might be tested several times during production. You might also have some issues if you use inspection points. I think it will use the last test result regardless of inspection points. But I'm not 100% sure on that.
You will also to need to make sure there are UD's on the inspection lot. You'll probably want to run the Auto UD for production lots and have it close all lots where the order has a TECO status.
Other then those cautions, it should work similarly to reporting results from an 04 inspection lot.
Craig

Problem with css processing in Firefox8 on Win7.

Hi guys. I have a problem with css processing in Firefox8 on Win7. I need to make div which width and left css properties should be dynamically changed. Inside this div i have an swf object. When i change width and left css styles for my div, it jumps on the page, but other browsers render that well. What can you suggest to fix this problem? Thanks

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

Webutil error "unable to communicate with runtime process."

Hi,
Yesterday I configured webutil with Developer 10g (9.0.4).
I used webutil_106.zip and jacob_18.zip.
I succesfully deploy a form that display the selection file dialog with the function:
CLIENT_GET_FILE_NAME
Today I tried to test again the form, and I got an error when the form is opening, I review the log and I find "unable to communicate with runtime process.".....
I didn't change any configuration... what I'm doing wrong..... It just work great yesterday!!!!
I tried signing again the jacob.jar and frmwebutil.jar files..... However I still have the error.......
Any help is welcome....
The error in the log:
09/03/25 10:57:45 Started
09/03/25 10:57:55 forms90web: jsp: init
09/03/25 10:57:55 forms90web: f90servlet: init
09/03/25 10:57:55 forms90web: FormsServlet init():
configFileName: c:\dev10g/forms90/server/formsweb.cfg
testMode: false
09/03/25 10:57:55 forms90web: 9.0.4.0.0 Started
09/03/25 10:57:56 forms90web: l90servlet: init
09/03/25 10:57:56 forms90web: ListenerServlet init()
09/03/25 10:58:02 forms90web: Forms session <1> aborted: unable to communicate with runtime process.
09/03/25 10:58:02 forms90web: Forms session <1> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
 at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
 at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
 at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
 at java.lang.Thread.run(Thread.java:534)
09/03/25 11:00:58 forms90web: l90servlet: destroy
09/03/25 11:00:58 forms90web: 9.0.4.0.0 Stopped
09/03/25 11:00:58 Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (localhost))
Edited by: Santiago on 25/03/2009 11:23 AM

I Find the way, It's OK now.
When I use the webutil.olb in a form. I chose "Subclass", It's necessary to choose "Copy".

F-04 - Post with clearing : Process open items

Hi everyone,
I encountered issues in T-code : F-04 - Post with clearing : Process open items.
The document header text data is not display in F-04. It is blank.
However, when i check in FBL3N the document header text data was there.
Pls assist on how to make the document header text data display in f-04?
Which configuration or any other way to do that?
Thanks.
Best Regards,
Joo

Hi,
The words of "Document Header Text" was there.
The data/informations for the Document header text is not there.
Pls advice.
Thanks.
Regards,
Joo

Updating a XML document with a processing instruction

Greetings Guru's
I have a fully functional XML database solution for our new system. The only thing left is for me to update a xml document in the database with a processing instruction to find the style sheet (JAXB strips it out when the XML must go back into the database).
I can update complete nodes and node elements in the xml document using updateXML in a regular update statement, but I do not know how to add the following processing instruction to my documents.
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
[pre]
Thanks in advance
Derrick

SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmlText := '<Hello>World</Hello>';
3 end;
4 /
PL/SQL procedure successfully completed.
SQL> drop table t
2 /
drop table t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> create table t of xmltype
2 /
Table created.
SQL> set long 10000
SQL> --
SQL> insert into t values (xmltype(:xmltext))
2 /
1 row created.
SQL> select *
2 from t
3 /
SYS_NC_ROWINFO$
<Hello>World</Hello>
SQL> update t set object_value = updateXML
2 (
3 object_value,
4 '/',
5 xmlconcat
6 (
7 xmlpi("xml-stylesheet",'type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"'),
8 object_value
9 )
10 )
11 /
1 row updated.
SQL> select * from t
2 /
SYS_NC_ROWINFO$
<?xml-stylesheet type="text/xsl" href="/RASWEB/JIT_REPORT.xslt"?>
<Hello>World</Hello>
SQL>

Problem in COHV with mass processing function Release.

Hello,Guru's
I have problem in COHV with mass processing function Release.
even after execution of COHV the status of Orders remains unchanged.i.e. remain Created instead of Release
My user require all Orders should release in mass process
with material availability Check .
and OPJK setting is
material availability
Check availability during order release=X
Release material = 1(User decides on release if parts are missing)

> with material availability Check .
> and OPJK setting is
> material availability
> Check availability during order release=X
> Release material = 1(User decides on release if parts are missing)
Hi,
With these two settings in OPJK, there will not be any impact on COHV.
Any dates, date ranges you are inputing in the COHV.
Try with Manually inputing some of the Orders in COHV and in the Foreground you try.
Afterwards, try with Some selected Orders in the Background..
You may get the clue for the problem..
Regards,
Siva

The *.icc file is associated with PS process after assigning profile for a picture of CMYK mode ?

Hi everyone, I have a curious problem for your help
My OS is Windows 7. Start PS and open an image, choose "Edit" -> "Assign Profile...", in the pop-up dialog there is a drop-down list showing many system profiles, and I find all of these *.icc files are stored in folder "C:\Windows\System32\spool\drivers\color". Just choose any profile to assign, then go to folder "C:\Windows\System32\spool\drivers\color" and find the related icc file, for example, JapanColor2001Coated.icc is for profile "Japan Color 2001 Coated". Now you can still rename the icc file, that is, the icc file is not taken by photoshop process. Our company has a software to generate icc files, however, when assign these profiles, the icc file is associated with PS process, which means I can't rename or delete the related icc file, even after assigning another profile, unless close the image documents, that is unwanted. So I'd like to know the reason, in fact I'm not very clear about the ICC file structure. I want to make the local disk file not associated with the process so I can do other operations.
Any suggestion will be appreciated.

I made a quick try and I can change the name of various custom profiles I've created using Photoshop but it appears that the name of the profile can't be changed if Photoshop was started with the profile in question selected as a soft proofing profile in View > Proof Setup. You have to quit Photoshop, just changing the soft proofing profile to another is not enough.

JDeveloper 11g with BPEL process Manager 10.1.3.1.0

Hi,
Here is my requirement.
To develop a simple web application which talks to a Business work flow developed using BPEL.
The Setup I wanted to work on
JDeveloper 11g.
BPEL process Manager 10.1.3.1.0.
Now the problems seems to be is that JDeveloper 11g doesnt seem to be having BPEL Designer ,is there is plugin for me to get BPEL Designer in my JDeveloper 11g.
Could some body tell me if i can use JDeveloper 10.1.3.1.0 with BPEL process Manager 10.1.3.1.0 if yes then
how do we configure the JDeveloper 10.1.3.1.0 to point to BPEL process Manager 10.1.3.1.0.
Regards
Harish

Huh? In the subject you're talking about BPEL 10.1.3.x and now you're asking for 10.1.2?
Anyway, you need the corresponding JDeveloper version to develop the BPEL workflow, ie JDev 10.1.3.4 for BPEL 10.1.3.4 or JDev 10.1.2. for BPEL 10.1.2.
You can install as much as possible JDeveloper versions on your machine. As long as they are installed in a different home. I usually have three to six installations.
Develop your workflow in the JDev matching the BPEL version and develop your UI in JDev 11g calling the BPEL as a WebService.
--olaf

Prob with Integration Process

Hi,
Juz a simple file to file scenario with integration process. Ain't getting the output file for any Integration Process>??????
1) File is picked up. No problem with dat.
2) In sxmb_moni shows just 1 chequered flag for central client.
3) Receiver grouping schedule for outbound processing.
4) Inbound message still in green.
5) Check the return code in SXI_CACHE its is 0. No problem with that too.
Why is that integration process doesn't run for any scneario???????????????
Cheers,
*RAJ*

Hey Gouri,
Thanks for the interest show i didn't knew abt logical delete yet so was good to learn. Thanks a lot for that.
Source and target are different in this case.
What i am doing is
Src interface:
1) data type
2) msg type
3) src MI outbound, Rec Abs, Send abs (both abs refering to src msg type )
4) int pro with 2 steps rec and send
5) Msg map between src and target msg type.
6) Inter Map between sendabs and target interface
As the mapping is between is send abs and target interface no need of transformation step.
Target system
1) data type
2) msg type
3) src MI Inbound.
This scenario did work before........lng tym bak
Mapping is fine no errors.
Cheers,
*RAJ*

How to find sql statement with Unix process pid

Hi
how to find sql statement with Unix process pid
is there any view to find that.
please if so let me know
Thanks in advance

this is how I am doing this:
oracle 7352340 7459066 0 07:47:10 - 0:00 oracleJDERED (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle 7459066 5386396 2 07:47:10 pts/1 0:01 sqlplus
select sid,serial# from v$session where process='7459066';
SID SERIAL#
2178 6067
select sql_text
from
v$sqlarea a,
v$session b
where a.hash_value = b.sql_hash_value
and b.sid = 2178
;

BPEL with Reliable Processing

Hi,
I read and work on the "BPEL with Reliable Processing" cookbook.
http://www.oracle.com/technology/pub/articles/bpel_cookbook/qualcomm-bpel.html
It's great!
I try to enhance the process by adding notion of priority between different records.
A priority-based process will favour those processes with high priority values.
To achieve that, I made the following modifications:
1) Add the "PRIORITY" column into the "DB_POLL_SOURCE" table.
CREATE TABLE "DB_POLL_SOURCE"
"ID" NUMBER (17,0) NOT NULL,
"VALUE1" VARCHAR2 (32),
"VALUE2" VARCHAR2 (32),
"VALUE3" VARCHAR2 (32),
"PROCESS_NOT_BEFORE" DATE,
"RETRY_COUNT" NUMBER (7,0) DEFAULT 0 NOT NULL,
"BPEL_STATE" VARCHAR2 (16) DEFAULT 'P_NEW',
"CREATED_DTS" DATE DEFAULT SYSDATE,
"MODIFIED_DTS" DATE DEFAULT SYSDATE,
"PRIORITY" NUMBER (7,0) DEFAULT 5 NOT NULL
2) Add an order by clause to sort the "PRIORITY" column in descending order.
3) Add the where clause (rownum<N) for getting the first N records from the query record set.
CREATE OR REPLACE VIEW DB_POLL_SOURCE_VW
(ID, BPEL_STATE)
AS
select *
from (
select
dbps.ID,
dbps.BPEL_STATE
from
DB_POLL_SOURCE dbps
where
(dbps.PROCESS_NOT_BEFORE is NULL or dbps.PROCESS_NOT_BEFORE < SYSDATE)
and dbps.BPEL_STATE like 'P_%'
order by dbps.PRIORITY desc
where rownum < 5
The problem is that the view must be updatable and ROWNUM cannot be used inside an updatable view.
The message error I got is the following:
ORA-01732: data manipulation operation not legal on this view.
So my question is:
How can I define an updatable view to sort the "PRIORITY" column and then limit the number of rows returned?
Thanks a lot
Olivier

If you want to update a view, you must use database triggers to perform this. You can user the statement:
CREATE OR REPLACE TRIGGER <triggername>
INSTEAD OF INSERT (or other UPDATE/DELETE or both)
ON <view>
FOR EACH ROW
BEGIN
.. PLSQL code here ..
END <triggername>;
/

Customer consignment with intercompany process

Hello,
Has anybody worked on Customer consignment with intercompany process. If yes, what are the main points to be taken into or configured for this process ?
regds

Hello Intercompany Gurús
I would like to know in case posible, the drawbacks of the folloing situation:
We have 2 plants, 1 selling plant (Plant1)in company code and 1 shipping plant (Plant2) in anothr company code working inside interconmpay + consignment process, plant 2 ships directly to cutomer consignment of plant 1´s customer (no phisical recepction in plant 1)
Customer place a Consignment fill up order in plant 1
Plant 1 place a PO for qtys needd to plant 2 as the consignment fill up order is intrcompany as well so PO is generated
Plant 2 generates a New Consignment Fill Up order with sold to as plant 1 and ship to customer consignment door
Plant 2 makes PGI and place stock in cutomer consignment line (ship to) and plant1 (sold to)
Plant 2 generates an intercompany invoice to plant 1
Customer will invoice to plant 1 base on consumption
So no reception is needed in plant 1
Is it posible this scenario?
Thanks and regards

COA's with In-process inpection w/o Batch Mgmt

Similar Messages

Maybe you are looking for