COA to be send to customer while saving delivery.

Dear Friends,
I have a requirement of sending the certificate of analysis (finished product) to customer while saving delivery document.
COA is the developed form (Z development) designed and that output we need to send to customer through email as soon as the sales delivery document is saved.
To sum up my requirement :
I need to send COA through email as soon as delivery is saved.
Please provide your expert comments.
Best Regards,
Shekhar

Dear,
You want to send a quality certificate for the delivery to the Sold-to party.
Define the settings for the output types for certificates (LQCA and LQCB in the standard system):
Quality Management -> Quality Certificates -> Output Determination -> Define Condition Types for Output Determination
Enter the required communication strategy in the "Default value" tab page. Assign output determination procedure to delivery item category".
Define the assignments of the output types for certificates for the print program and transmission medium:
Quality Management -> Quality Certificates -> Process Output -> Assign Print Program to Output Type/Medium
Program RQCAAP00, FORM routine ENTRY, do not specify a form.
The standard system provides the universally applicable QM_QCERT_01 form.
The forms must be compatible with the output program. In the standard system the following output programs are available:
RQCAAP00 for certificates for a delivery item
You can access this program in Customizing for message dispatch and the program can be exchanged.
RQCAAP01 for certificates for an inspection lot
RQCAAP02 for certificates for a batch also you can use the FM 'QC02_BATCH_CHAR_SPECS'
SAPLQC07 for certificates for a batch on the Internet
For more details refer the OSS note 39418.
Regards,
R.Brahmankar

Similar Messages

How to send a mail while saving va02

Hi experts,
i have to send a mail while saving the VA02.
The mail id s are maintained in Custom table based on the plant.
Regards
Ramakrishna L

Hi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L

Updating NAST values while saving Delivery

Hi All,
I am creating Inbound delivery using VL31N transaction while saving Inbound Delivery an output type
is created with option '4. send imeediately'....' and '0 unprocessed' , but I need to change it to
'3. Procees with transaction..' and '0 unprocessed' while saving, without changing the master using NACE
is there any exit/badi by which I can change the values of NAST i.e fields vztvp, vstat
so that its bypass the nace setting for Output type.
thanks
tanmay

Hi Anuradha,
the condition record setting is ok, with processing mode like '4' send immediately, but I have to to change the same in a routine I have created say 901 using tcode v/27 fro Inbound delivery and I want it to set to '3. Call with transaction' , but when I am changing to 'Call with transaction' it automatically set again to 'send immediately' , the problem is how to change the same , Is there any method to do so.
thanks
tanmay

How to update Sales Order Delivery Block while saving Delivery ?

Hi,
I have a requirement wherein i need to update sales order delivery block field(VBAK-LIFSK) while saving the delivery for the order.
Also I need to remove this block while execution of Backorder Rescheduling program SDV03V02 (Tcode : V_V2),
Can anybody help me out in this?
regards,
Nitin

HI,
try using BAPI_SALESORDER_CHANGE
pass ur vbeln in SALESDOCUMENT
pass an 'X' to BAPISDH1-DLV_BLOCK
and 'X' to BAPISDH1X-DLV_BLOCK
Also add the UPDATE task clause, you will want to set the flag only when delivery is being saved, not before that.

No batch number appears while saving delivery

hi all,
While creating delivery,system is throwing a message
"cannot add row without selection of batch number" and
there is no batch no in the available batch for auto selection.
Our client is unable to create delivery and subsequently
do AR invoice.
Additional Info:-
Items in the delivery is already batch activated- Batch ,On Release only.
Batch was also activated in general settings of Administration module.
System was not asking us to enter batch number anywhere in the production cycle.
Expecting your esteemed reply.
Jeyakanthan

Jeyakanthan,
I believe you have Batch management set in the Item Master but it is on Realase only.
You can create Batch numbers for already received items. See help file extract below
In addition, you can enter batches for the received items if you did not do so while generating marketing and stock entry documents. However, this is only possible if your company allows the receipt of items to stock without a batch number.
To use this function, choose Inventory > Item Management > Batches > Batch Management.
In Operation..Select Complete to create batches for the received items
Enter a range of item codes, for which you want to create or update batches.
Click Ok and create the necessary batches
Let me know
Suda

Send Mail to Customer while saving the Sales Order

Dear Friends,
My Requirment is to send the mail to Customer automaticaly when create any Sales Order.
While sending the mail given three points reqired.
1.     Send the attachment of Order Conformation along with the mail.
2.     There must be The title text as "Order Confirmation refrence of your PO <Customer PO No> <PO Date>"
3.     There must be some body text like some terms and conditions with variables of Order data.
Can any body help me one this step by step.
Kindly suggest me how to do this.
Thanks in Advance.
D Tarun Kumar
Moderator message : Spec dumping not allowed, duplicate post. Thread locked.
Edited by: Vinod Kumar on Jul 12, 2011 11:30 AM

While saving the sales order through Va01 and Va02 and email has to send

HCM PnF - "Send" button missing while saving the form as Draft

Hi All,
We are facing an issue in HCM PnF.
Issue is - Whenever we are saving the form as Draft and later on when we open it and try to send it, the "Send" button is missing.

Hi Pooja,
I think u are viewing the Display Form Records, When you select the Record in the Draft status then it just opens the form which just gives the option to view not to check and send.
You have the select the Record from the Above tabel (UWL) which will open the appln which will be having the different buttons in different view of Process..
Hope it helps.
Thanks
Dipu

SMS send to Customer while customer creation cic webclient

Hi Experts,
We have a requirement that " Send SMS from BP (customer Master)". Send SMS to customer's mobile after successfully creating customer master record by pressing SAVE button in CIC WEB Client Account identification New bp (sold to party).
How to send SMS from BP(SOLD TO PARTY) tcode? We have creating customer from account identification through u201C new u201Cin cic web client.
Please suggest me any abap program to fulfill this requirement.
Please help me out.
Regards,
KANTH

Hi,
Please check this [link|Re: How to send SMS by using ABAP program].
Regards,
Shobhit

User exit to send error message while saving UD - QA11

Hi all,
We have a requirement to check the UD code and the stock posted when the user clicks the "Save" button in QA11.
i have checked with the available qeva0001 - qeva0010 user exits - but none seem to satisfy my requirement. can anyone kindly guide me through this.
reg
madhu

Please share your Solution. Same problem here.
Thanks & Regard.
Pradip Patel.

Structure or field where serial number is stored, while saving delivery

Hi All
When user will create an OB delivery ...he will enter the Serial Number of the Materials and then user will hit PGI.....
before the document get saved i want all the serial numbers that user has entered....and i want to process them....those serial numbers will be in some structure/Internal table......
I am not getting those serial numbers in the userexits...may be i m skiping somthing....
Please help me on this....
Thanks in advance,
Sabu

Hi,
In program 'MV50AFZ1', use the user exit 'userexit_save_document' for this purpose.
Inside this LIKP structure will contain delivery header info and XLIPS, YLIPS etc will contain item level info like material etc..
Here if XVBUK-WBSTK = 'B'/'C' indicates PGI is happening; else it indicates just delivery is being created.
Hope this helps you !!!
Regards,
Ganga

While saving the sales order through Va01 and Va02 and email has to send

Hi Experts,
My requirement is to send an email with PDF formatted display of the Sales order to the sold to party's email id while saving the Salesorder through Va01 and Va02.
I need the following .
How to send an email with PDF formatted attachment of Salesorder display ? (we have done the formatting of display through SMARTFORMS )
I think we can do it by userexits program name is MV45AFZZ while saving the document.
Please suggest me the best possible way.
Thanks ,
Saritha

Hi, there is no need for a customer devlopment on this. A standard smartform output will do with output medium '5' (external send). Then the smartform output will be send as PDF to the e-mail address in the output partner. Have a look at transaction NACE.
Regards Jack

HOW TO Send mail while saving VA02

How can i send mail while saving VA02.
The mail address i have to pick from custom table based on plant.
Just for the trial we used : output type :KRML
Application : V1
Transaction medium :7.
and the program RSNASTSO routine SAPOFFICE_AUFRUF_VX is attached in the nace.
The same output type is attached in va02.If we use this output type with this medium , it is asking us mail partner
address also in the VA02.
but we have to get the mail partner from custom table.
And with this output type , the program attched in the NACE (RSNASTSO) IS NOT GETTING triggered.
But the mail is being sent to the mail partner which i mentioned in the VA02 Communication method.
How can i solve this.
Finally my requirement is i have to send a mail to exter id which is maintained in the custom table while saving VA02.
Regards
Ramakrishna L

Hi,
We had set a output type in NACE. and that output type we have in the VA02 transaction also.
But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
But mail is sent to the SAP Inbox or official id .
how that mail is gone i am not understanding.
How can we do to go through the program mentioned in NACE while saving the VA02.
The mail body coming with text " sales order is blocked" sopme thing like this.
This same mail i have to sent to the mail id maintained in Custom table plant wise.
Regards
Ramakrishna L

Regarding mail sending while saving VA02

Dear Experts,
I have requirement mail to be sent while saving VA02 .
Mail ids are maintained plant wise in custom table.I have to send the mail to the mail id maintained in custom table while saving the VA02.
Here in VA02 we have added output type which is related to mail which triggers the program RSNASTS0.
But while saving this program is not getting triggered.But mail is coming to the SAP INBOX.
Why this program is not triggered and how can i do the abouve requirement.
Regards
Ramakrishna L

Hi Rama,
First of all, could you please tell me whether the NAST program that you wrote is sending the mail to SAP Inbox. If that program is sending the mail to SAP indox, then to send the mail outside SAP, like the users official mail id, you need to activate auto forwarding feature. This can be done using Tcode "SO36". You can activate this feature and try to test it out.
Please let me know if this will server your purpose.
Regards
Maneesh Chandran
Edited by: Maneesh Chandran on Aug 9, 2010 8:35 PM

Send e-mail Billing document as PDF Attachment while saving from VF01/02

Hi all,
I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the smartform and an email is sent when an output is issued manually from VF02/03 where as the requirement is to send email whenever the document is saved.
We need to trigger this while saving the Output type say, <b>VF01</b> GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
need ur help on this.
thanks,
Subba.

Hello,
Just like you have defined an ouput type for smartforms ,you can define new output type with external email option as medium which will first generate a PDF from invoice data & then send it as email .
I am not sure but you can also try this ::::::
If you have custom-developed smartforms program,then you can add email code at the end of smartform execution by generating PDF, in the same output type instead of creating new.
Thanks.

Customizing tables not asking for Customizing Request while saving data

Hi,
I have some customizing tables in my development server (Delivery Class = 'C').
These always used to ask for a Customizing Request whenever data was saved in them.
Suddenly, I have noticed they are no more asking for any Customizing Request. I cross-checked in the Transport Organizer and confirmed that there are no customizing requests of mine which may be already holding any data entries of these tables.
I wonder why this may be happening (believe it to be some basis configuration issue. also asked my basis guy but he has no clue).
Kindly suggest.
Thanks,
Z

Thanks Navneet and Gautham.
My problem is now solved. Let me summarize the problem and the solution now.
-> The customization tables suddenly stopped asking for a request while saving data.
Somehow the settings had been reset, and as Gautham pointed out, it was corrected in the tcode SCC4
-> Most of the tables now worked fine, but still few of them didnt ask for requests
Here, I found out that the developers had chosen "no, or user, recording routine" instead of "standard recording routine". For such tables, when i check in the tcode SE54, menu path Environment -> Maintenance Objects -> Change, I find the Transport category 'No Transport'. Regenerating the maintenance generator choosing "standard recording routine" fixes this and the tables now ask for a customizing request.
Thanks, both, for the quick response.

COA to be send to customer while saving delivery.

Similar Messages

Maybe you are looking for