COA trigger wrong logo.

Hello all,
When we done the Post goods issue of delivery on that time COA mail trigger to customer mail ID on that mail COA LOGO display the different form & when we run the QC22 or QC20 COA print the correct LOGO.
Can you any body help me.
Thanks,
Devendra

Look at your configuration where  you assign the print program to the output type/medium.
For the standard program you are probably using the standard program RQCAAP00 with a form routine of "Entry"
For your mail COA you have probably selected either a different program then RQCAAP00 or a different form routine specifed.
Have you written a special program for mail?
FF

Similar Messages

  • First podcast uploaded with the wrong logo, can I change it without removing the whole podcast?

    Hi Folks,
    We just uploaded our first podcast but unfortunately, the wrong logo has been uploaded. I was hoping we could change the logo without having to remove the entire podcast? Any help would be sincerely appreciated,
    Thanks in advance!
    Ollie

    Are you talking about the image which appears in the Store page? Just choose a new image and make sure it has a different filename, get it into the feed in the same way as you originally placed an image, and re-upload the feed.
    It will take the Store some days to recognize the change.

  • Logo for Script

    Hello All,
    Now that I have found the form, (thanks for helping on that) - further.
    I have to find why a wrong logo is being printed on the form.
    Where are the logo files stored?
    There is a Logo Window which has this code :
    IF &T001-BUKRS& = 'BDC'                           
    INCLUDE ZHEX-MACRO-BEEB-300-BMON OBJECT TEXT ID ST
    ELSE                                              
    INCLUDE ZHEX-MACRO-300BMON OBJECT TEXT ID ST      
    ENDIF

    Hi
    For Scripts Logos can be on desktop or anywhere on your SAP system, we convert them to .tiff files.
    for smartforms check the Transaction SE78 for
    Graphics .
    To create a logo in SAP printouts just do the following
    1. Save a Logo using Imaging, Paint shop Pro or Corel Draw as Tiff file.
    2. Run  program RSTXLDMC and enter the following parameters
       Enter file name                     C:\COMPLOGO.TIF
       UOM                           CM
        Line width for text                132
        Text name                     ZHEX-MACRO-COMPLOGO
        Text ID                          ST
        Text language = E
        Number of Tiff gray levels (2,4,9) 2
    3.  Then Create a new window 'COMP' with attributes;
    Window COMP description Company Logo
    Left margin 7.00 CH window width 10.00 CH
    Upper margin LN window height 8.00 LN
    Finally in the text element, mention
            /: INCLUDE 'ZHEX-MACRO-COMPLOGO' OBJECT TEXT ID ST LANGUAGE 'E'.
    Please note that if object name is not indicated as 'ZHEX...’ the logo may not be printed!
    You will not be able to see the logo in a test print. The same will be printed in actual printout.
    Reward points for useful Answers
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • MSI NX6600GT-VTD128 - locking up in games

    Hi everyone,
    I've been looking round these forums for the past few days since installing my new 6600GT card on Christmas in an attempt to fix the stability issues I'm having. From other threads I've tried such things as:
    - Changing drivers (currently running the latest 71.22 drivers despite there being a CRC error in the NVCPZHT.HL_ file on extraction...they installed without complaint...). I was seeing the same freezing issues with the standard 66.93 NVIDIA drivers though.
    - Updating my NFORCE drivers through LiveUpdate to the latest version (3.75)
    - Updating my K7N2-Delta motherboard BIOS version (MS-6570 up to the latest 7.80 BIOS).
    - Setting the 2D and 3D clock speeds to the same (originally my 2D was set to 300Mhz and the 3D was 500Mhz). I tried bringing the 2D up to 500Mhz, but games still freeze.
    Prior to installing this MSI card I had run a Leadtek GeForce 4200Ti for a couple of years without a problem. One thing worth mentioning was that after upgrading my motherboard BIOS to the latest version all of the settings were restored to the default values (expected). However, I forgot to bring the clock speed of my FSB up from 100Mhz to the normal 166Mhz for a couple of reboots. My processor was only running at 1.1Ghz instead of the stock 1.8Ghz, and funnily enough I didn't have a single crash at this underclocked setting. Games ran quite poorly, but they didn't crash!
    I'm hoping someone will be able to come up with some more suggestions for me.

    Hi Aussie,
    yes, "sort of", because I believe that MSi (and most of the other manufacturers as well) had done better spending some more weeks of developing a perfect card, but I think christmas came close, so probably it HAD to be out on the market soon. It's only small things, wrong logo on the manual, wrong labels on the video-out cables, and of course the delivery of defective devices, which can happen with any other manufacturer as well, but I have read of soooooo many people getting a defective one in the first run, that I simply cannot believe that this is still the "normal" margin.......... Well, good quality assurance and perfect details make a brand attractive, that's why I always loved MSI, but I'm beginning to miss that more and more......
    If you get a working one, I still believe that the MSI 6600GT is one of the best choices, especially because of that silent fan and the huge software bundle......
    cu,
    Jackie

  • How do I report a security problem to Firefox?

    Here's the problem: <br />
    Wednesday morning my Mac at home got infected by malware which I believe is usually called the "Google redirect virus". My Mac at home has been upgraded to OSX 10.6.7 and I believe I was using Firefox 3.6.13 (it automatically upgraded tonight). I haven't been able to find any useful information on line about this malware. <br />
    The behavior after infection was that every time I tried to use Google my request would get redirected. If I entered www.google.com in the address bar, the URL would get changed to www.google.com/FuneralHomes/<something> and the browser would try to go there and a "Under Construction" error message or a no-such-page message would be returned. This started happening after I did a Google search and was checking various links in Firefox, but once it started in Firefox I got the same behavior in Safari even without using Safari to look at any links. And it continued to happen in Safari even after I did a "Reset Safari..." <br />
    When I got infected I was using a non-adminstrator account and I was not asked to download anything nor was I prompted for a password. <br />
    I searched on "Google redirect Mac virus" using my (so far) untouched work computer and found several suggestions but no solutions. Apparently this is a PC problem that's been around a few years, but there were some Mac reports from last year. So last night I checked the DNS addresses in my
    Network preferences, looked at /etc/hosts, and removed the only plug-in from the Library:Internet Plug-ins of the infected account, even though it was a Picasa plug-in that predated this infection. None of those seemed to be the problem. I also scanned my disk with an up-to-date "Norton AntiVirus" which
    I got from work some time ago, but it found no viruses. <br />
    What really puzzles me is that the problem gradually went away while I was checking it last night. At first, when I entered www.google.com the browser would still show the redirected address in the prompt that comes up and it had the Legacy.com logo on the left instead of the Google one but it would actually go to the Google website (unless I'm being spoofed). Then at a later attempt, only the wrong logo persisted. Then at an even later attempt the logo got fixed and everything looked fine and appeared to behave correctly. <br />
    Frankly, that's a little scary. It's as if a really smart trojan got
    installed and was covering its tracks while it set up a man-in-the-middle attack (please advise if I'm misusing the jargon). If I'm being too paranoid, great, but I'd still like to know how such behavior could be induced on my machine just by linking to a website. Can anyone help?
    ''moderator- fixed the leading space formatting errors in this posting''

    Thanks, the-edmeister, but the only relevant post I found was from GB Colburn on bleepingcomputer.com, wherein he reported a similar problem about a year ago. I've found a few similar threads in the last year or so (by searching "Google redirect mac virus" in Google) but they are all about the same: someone reports the problem, responders have various random suggestions, the problem seems to go away by itself (at least sometimes), and there's nothing conclusive either good or bad.
    Without myself being as knowledgeable as GB Colburn, it doesn't look to me like the problem is in the DNS system or the router. It acts more like some malware in the automatic completion in the address bar of the browser or maybe in the history system, but I can't figure out how an infection in one browser could affect another browser. And I *really* can't figure out how it could be self-healing.
    It's really frustrating that none of the major parties involved in this—Firefox, Google, Safari (Apple), Verizon (my internet provider)—even have a process for reporting a security issue. At least not one that I, an ordinary semi-naive user, can find.

  • AR Invoice

    We currently have 2 different operating units, 1 which is live and the other that will go live in about 6-7 weeks. In OU1 (the one that is live) we have already created an invoice via XML Publisher and it's working well :) We need to do the same for the OU2 and basically it's identical except for the logo!
    Right now we have the XML template pointing to the seeded oracle invoice prints.
    So, we are looking at what are the best options going forward. I can see 2, maybe 3.
    1). Create another template for the OU2 invoice and assign that to the seeded invoice prints too. This will mean that when the invoice print is run they will have to make sure to choose the correct XML template otherwise the invoice will print with the wrong logo. Of course we could set up a concurrent request to print new invoices and assign the correct template at that time and have that run on a frequent period. However, there will always be the occassion when they need to do a manaul print/reprint.
    2). Create another set of concurrent programs for OU2 and assign the new invoice template to these concurrent programs. Therefore they just need to pick the correct one to print the correct logo.
    3). This is the option I am not sure about. I've done this before, but it was in reports 6i. Is it possible to have 1 invoice with the 2 logos embedded and based upon some hidden parameter that is passed (org_id) to print the correct invoice ?
    Any help/suggestions would be much appreciated.
    Thanks.

    Thanks for that info. Very useful.
    I think that the issue is that the standard oracle print doesn't seem to pass the ORG_ID or produce it as part of the XML output, at least not what I am seeing when I look at my XML output.
    So, I guess I would have to add the org_id as a parameter that is passed to the report and then I could use it in the if statement.

  • Signal express tektronix

    I'm using Labview signal express tektronix edition and connecting my tektronix tds3054B to it by ethernet. When I typed in my oscilloscope ip address to the program, it can't acquire for the signal. I think I have all the required driver and VISA. Here is the error that it gave when I tried to connect:
    Error -1073807298 occurred at Property Node (arg 1) in tek_subTek3kScopeInitializeData.vi->tek_Tek3kScopeInvokeCommand.vi:1
    Possible reason(s):
    Primary Error: (Hex 0xBFFF003E) Could not perform operation because of I/O error.
    Elaboration: Attribute: TKDS30XX_ATTR_SLEW_DELTA_TIME
    Any idea how to solve this error?
    Thanks,

    Hi,
        I can see my instrument listed under MAX so that means I can communicate successfully. However, when I ran the Signal Express Tektronix edition, I cannot see the signal on my computer. I have posted screenshots I think they might be useful.  When I clicked run, the program is just "waiting for trigger" but I can't see anything on dataview. Maybe I set up the trigger wrong? Please let me know if there is anything I should try.

  • Cannot open PDF-files, "not a right win32 program"

    All my PDF-files have the wrong logo. Instead of the PDF logo the have a small Excel logo down in the right corner.
    If I try to open it is says it is not a right win32 program. I need help with this.
    I downloaded Adobe Reader X today and it did not help. In Reader X there is an option for open files and there it is no problem. All open pdf-files have the right logo in there but the same file anyplace else have abovementioned problem and can not open.

    I opened one of the PDF files in notepad and these are the first couple lines:
    瀖ᕁމጿ␠씴豈䧉筩롈ꓳ劏ꎯ僪뚢頟뻏즏谀㿃夑퀉꟠鲲쮂⫉笿褡밤籞冁탁ӓ轸뿐笼ⵆ횰䄌ඁ淥ة寨闤⬅鳦팥링빨嬄敎უ婏㣴ً鮓ࣿꢚ㑀녲莒඼ိȆ䕇纍쉉籶뺝갞伐쮠᥏﯒넉釖ȓ겴☧ ἣ秵駻�䣞띰㖔流羀籔朼敨ꢉ糶당⬤俉膇䄐惡�ಹꛖ鍡恡ⱶᶜ�堷﹑ﱌ僿걄뎔æ䋷귪⛢⫐䅪䉙὿烶ꖆ႟ᗔ瘞狻틫儩六잶覱낵듘盋崾�ᦜ㺆௹뻹燴ឋ騙쬄ꏿ뽒煹�钼뇲腎稦ꃲ㈃沒ꔈ뺐뛽첑䘶畱䍣紻 ⁜哠鳾

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  What's wrong and how do I fix it?  Help!

    Installed the update tonight and now my phone (Lumia 928) won't power up.  I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen.  Tried it 10 times with the same result.  What's wrong and how do I fix it?  Help!

        Oh no Mr.Ected!
    I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
    AmberF_VZW
    Follow us on Twitter @VZWSupport

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Please trace what is wrong in TRIGGER script , doesnt create trigger.

    Hi Oracle Gurus,
    Please help me, in finding what is wrong in trigger statement. It doesn not create trigger, instead it displays line numbers..like 1 2 3 4 ....after pressing the enter key,
    I am attaching the full script, where it alters table, then creates new table, the creates sequence..lastly it fails in creating the trigger.
    ==================================================================================
    SQL> ALTER TABLE MOBILE.MOBILE_USER ADD (LAST_LOGIN TIMESTAMP);
    Table altered.
    SQL> CREATE TABLE "MOBILE"."AUDIT_LOG"
    2 3 "AUDIT_LOG_ID" NUMBER(16,0) NOT NULL ENABLE,
    4 "DATE_CREATED" TIMESTAMP (6) NOT NULL ENABLE,
    5 "AUDIT_TYPE" VARCHAR2(20 BYTE) NOT NULL ENABLE,
    6 "AUDIT_DATA" CLOB,
    7 CONSTRAINT "AUDIT_LOG_PK" PRIMARY KEY ("AUDIT_LOG_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "SERVICES_DATA" ENABLE
    8 )
    9 PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
    INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
    10 11 12 )
    TABLESPACE "SERVICES_DATA" LOB
    13 14 (
    15 "AUDIT_DATA"
    16 )
    17 STORE AS
    18 (
    19 TABLESPACE "SERVICES_DATA" ENABLE STORAGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    20 ) ;
    Table created.
    SQL> CREATE SEQUENCE "MOBILE"."AUDIT_LOG_SEQ" INCREMENT BY 1 START WITH 1000 CACHE 20 NOCYCLE ;
    Sequence created.
    SQL> create or replace
    TRIGGER "MOBILE"."AUDIT_LOG_TRGR" before
    INSERT ON "AUDIT_LOG" FOR EACH row BEGIN IF inserting THEN IF :NEW."AUDIT_LOG_ID" IS NULL THEN
    SELECT AUDIT_LOG_SEQ.nextval
    INTO :NEW."AUDIT_LOG_ID"
    FROM dual;
    END IF;
    END IF;
    END;

    Ok great..but it gives the same error, we have already checked that AUDIT_LOG does exist.
    Is it checking something else..or it shoud be INSERT INTO instead of INSERT ON.
    Please help.
    create or replace
    TRIGGER "MOBILE"."AUDIT_LOG_TRGR" before
    INSERT ON "AUDIT_LOG" FOR EACH row BEGIN IF inserting THEN IF :NEW."AUDIT_LOG_ID" IS NULL THEN
    SELECT AUDIT_LOG_SEQ.nextval
    INTO :NEW."AUDIT_LOG_ID"
    FROM dual;
    END IF;
    END IF;
    END; /
    INSERT ON "AUDIT_LOG" FOR EACH row BEGIN IF inserting THEN IF :NEW."AUDIT_LOG_ID" IS NULL THEN
    ERROR at line 3:
    ORA-00942: table or view does not exist

  • What is wrong in this trigger

    Hello All,
    please tell me whats wrong in the following trigger,
    what effectively i am trying here is I wanted to insert the old records
    before update to a temporary table, if this is not the way, then what is the correct way.
    SQL> desc ttt1;
    Name Null? Type
    C1 NUMBER
    C2 NUMBER
    C3 NUMBER
    BMU_ID NUMBER
    SQL> desc temp_changes;
    Name Null? Type
    BMU_ID NUMBER
    C2 NUMBER
    C3 NUMBER
    SQL> ed
    Wrote file afiedt.buf
    1 create or replace trigger tri_ttt1
    2 before update of c3, c2 on ttt1 REFERENCING OLD AS old_ttt1 NEW AS new_ttt1
    3 begin
    4 insert into temp_changes
    5 SELECT BMU_ID,C2,C3
    6 FROM ttt1
    7 WHERE old_ttt1.c2<>new_ttt1.c2
    8 AND old_ttt1.C3<>new_ttt1.C3;
    9* end;
    SQL> /
    Warning: Trigger created with compilation errors.
    SQL> sho err
    Errors for TRIGGER TRI_TTT1:
    LINE/COL ERROR
    2/1 PL/SQL: SQL Statement ignored
    6/18 PL/SQL: ORA-00904: "NEW_TTT1"."C3": invalid identifier

    you forgot the colon (:) before new and old...

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • What's wrong with this trigger?

    hi! i am creating a trigger that calls a procedure, it showed the following message. what's wrong?
    SQL> create or replace trigger phang.t2 after logon on portal30.schema
    2 begin
    3 call phang.dob;
    4 end;
    5 /
    Warning: Trigger created with compilation errors.
    SQL> show error;
    Errors for TRIGGER PHANG.T2:
    LINE/COL ERROR
    2/6 PLS-00103: Encountered the symbol "PHANG" when expecting one of
    the following:
    := . ( @ % ;
    The symbol ":=" was substituted for "PHANG" to continue.
    thx.

    my trigger itself doesn't contain any htp.p statements, it just calls the procedure which has the htp.p statements for generating the page.Which is the same problem as calling HTP within the trigger itself. I'm not saying you CAN'T call HTP from your trigger (directly or indirectly) - I'm saying you SHOULDN'T.
    You should have a sequence of events like this, for a more reliable PL/SQL Gateway experience:
    Pseudocode:
    A procedure (referenced by URL via the gateway).
       This procedure issues DML (which causes the trigger to execute)
       The trigger writes some information to a package variable (or other static container).
       The trigger completes.
       The procedure then accesses the package variable, and then HTP's that information as desired.
    The procedure completes.The difference in the above pseudocode and what you are trying to do is that the act of streaming to the buffer is completely within the procedure being referenced by the gateway. When you put the HTP calls in procedures (unknown) to the procedure that the gateway is executing, you will often get erratic and unpredictable effects.
    I have gone around this concept before, but I have had years of experience working with the gateway - something you aren't going to get in this Forum.

Maybe you are looking for