Cockpit - authorizations with hierarchy

Hello,
I have a problem in a cockpit, and it is relating to authorizations with hierarchy.
I have an object of authorization already defined with certain criteria (bucket and node of the jerarquiaa that only I want that agrege deposit a user) this object in a rol, unitedly with a profile of visualizing the cockpit. When I enter with the user to visualize the cockpit I enter to all the nodes, my question is: Why not respecting my authorization for the node of the hierarchy that alone I want to show?
thank you.
Mike

listo ya quedo

Similar Messages

Authorization and hierarchy management

Hi,
I would like to authorize a user to maintain a hierarchy with RSH1 but I would like to allow him to only access to a part (noed) of the hierarchy.
I though about 2 possible solutions but I dont now if its possible:
- I can use the Authorization Object S_RS_HIER. Is it possible to allow access only to a noed (and subtree data) of a hierarchy with this Authorization Object ?
- I though about the authorization with hierarchy (and AO TCTAUTHH ) of transaction RSSM but I think that this functionality is only useful to control/filter data based on hierarchy from a particular cube but that its not done to control acces to the hierarchy itselve.
Do you think I am true?
Thank you for your help.
Best regards
J. Sorel

Nobody can help me please?
Many thanks
J sorel

Hierarchy authorization with variables of type exit

Hi all,
I am trying to implement hierarchy based authorizations with variables. After collecting information from the SAP documentation and this forum, I think I know more or less how to do it, but it's not working and it has me very confused.
These are the steps I have followed:
- From RSSM, I have created a hierarchy authorization object including my characteristic and 0TCTAUTHH
- From RSSM again, I have created a hierarchy authorization pointing to the node $ZG_V_008
- From the Query designer, I have created a hierarchy node variable of processing type customer exit ZG_V_008 (are any special settings needed here?)
- From the Query designer, I have created another hierarchy node variable of processing type authorization, and I have used this variable to restrict the hierarchy for my characteristic
- I have edited the EXIT_SAPLRRS0_001 to watch for I_STEP = 0 and give values to ZG_V_008 (we'll get to my code later in case we solve this issue first
It is my understanding that with this setup, the user exit will be called to process the value of ZG_V_008 in I_STEP = 0, however, when debugging, I don't see any calls for the function with I_STEP = 0.
What have I done wrong?
Thanks a lot in advance.
Guillermo

Thanks, Jimmy, but that does not help much: my problem is that my user exit is not evaluated with I_STEP=0, but there are no error messages or anything like that.
I have created a test user without a developer role to see if that could have any impact, but it's still not working.
Any ideas?

Data Modelng with hierarchy??

Hi Gurus,
I am working with Infosets and many of these infosets have the following joins below. EngMDlNbr to Product Code to Summary product Code and Product main group
All these Master Data are loaded from flat files.
Product Hierarchy:
Char 1: EngMdlNbr:
       1. EngMdlNbr
          2. Product Code
       3. Many othe characteristics
Char 2: Product Code
       1. Key-Product Code
          2. Summary product Code
Char 3: Summary Prod Code
       1. Key-Summary product Code
          2. Prod Hierarchy level
       3. Product Main Group
Char 4: Product main Group
       1. Key-Product Main Group
          2. Prod Hierarchy level
Please clarify whether the performance of the queries will improve if I reduce these Joins by building
1) Hierarchy at Product Code and include (Summary Prod Code and prod main grp) or
2) By including Summary Prod Code and prod main grp as Attributes in Product Code Characteristics.
If I use Hierarchy, how will I load the data with hierarchy information.
Please advice.
Thanks and Regards
Andy

Hi
Just check how the component hierarchy is maintained because if hierarchy maintained properly then your report will come out properly.
When transaction data coming from ECC hierarchy key filed contains your parent and child relationships.
Regards
Jagadeesh

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Creating a list in Pages with hierarchy

How do you create a list in Pages with hierarchy?

Hierarchy is just a matter of indent levels.
Pages works by example so having set up the initial one level list, hit a return after one of the points and tab to move to the next level.
Then apply settings in:
Format > Text > Bullets & Lists > to each level if it isn't already an indented List
You can save the final set of hierarchical list as a List Style for reuse.
Peter

Issue with Hierarchy selection in Filter area

Hi experts,
We have an issue with BEx query selection.
Structure of Quey
1. Filter Area
=> Characteristic Relations : Restriction condition with hierarchy
2. Rows
=> Display characteristic with hierarchy active
3.Columns
=> Formula with keyfigure using sign reverse of hierarchy (formula variance).
<symptom >
When I use context menu, "Keep filter value", with the displayed hierarchy node,
and drilldown with other characteristics, the result became wrong. Filter value I kept became inactive.
Workaround I found was like belows.
1. Remove sign reverse calculation in Formula.
2. Keep sign reverse calculation and move restriction condition with hierarchy in filter area TO default values.
I wonder this symptom was right technically or bug ocurred after version upgrade or something.
Thanks in advance.
BEx BI Addon 7.X(based on 710)/SP11 Revision 634

Hi
This depends on the logical database that the report is based on. Secondly I have experienced that the report variant overwrites the date selections and therefore it looks like that the dates are not parsed (which I think is your problem).
For e.g. logical PHP and PHPCE both the period and data dates are filled with the data selection from the portal. (check on the report attributes in SE38 which logical DB used) For e.g. PTRVP (travel) no date are passed at all in the call of the report!!
To make sure that the report variant isnu2019t overwriting I normally set the variant for the report to u201CSave field without valuesu201D for the date selection periods and then it isnu2019t filled by the variant.
Data selection period
Data selection period: Start
Data selection period: End
Employee selection period
Employee selection period: Start
Employee selection period: End
Regards,
Lars

HT204074 If I have additional music on my second computer that I authorize with iTunes Match, How do I upload it to iCloud?

If I have additional music on my second computer that I authorize with iTunes Match, How do I upload it to iCloud?

check out this post by Zevoneer.

Transport roles and analysis authorization with user assigned

Hi expert,
I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
Thanks for your time,
Luis

Hi,
In role administration, you have the following options for transporting roles:
You can download the roles from one system and upload them into another
You can import the role from a remote system using RFC
You can transport the roles with the transport function.
Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
Transporting Roles with the Role Transport Function
       1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
       2.      Enter the role to be transported and choose Transport Role.
The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
For more information go thrpugh the below link
http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
Regards,
Marasa.

Error when clicking in the filter zone of a carac. with hierarchy

Hello,
I am using the SAP BI7 version and I have a problem in the BEX anayzer. When I click in the filter zone and when I choose a filter caracteristic that contains a hierarchy I have the following error message and i am killed:
Class RSBOLAP 000:Error in the SAPMSSY1 method: uncaught exception
Class BRAIN 299 System error int the CL_RSR_NET_RSMD_VHS_SVC program and form GET_HIER_NODE_READER:01.
Do you have ever had a same error? what can be solution?
Thanks for your help!
Regards,
Julien

Julien,
Refer to the SAP Note 1013095 - UNCAUGHT_EXCEPTION for queries with hierarchy variables. This seems to be referring your scenario.

Cell Editor in query desinging with hierarchy in row

Hi,
Is it possible to use cell editior with hierarchy in row? I am able to use it with structure in column.
Pl advise
Best Regards,
UR

Hi,
you need to have a structure in the rows and in columns.

Drill Down BeX Query with hierarchy in WEBI

Hi,
I am using a Bex Query with Hierarchy in my WEBI report. Is it possible to drill down ? I am not able to use Scope of Analysis because it is disabled. I am very new to WEBI. Please help me out.
Thanks in Advance.
Lakshmi Mohan

http://www.google.co.in/url?sa=t&rct=j&q=drill%20down%20bex%20query%20with%20hierarchy%20in%20webi%20%20%20&source=web&cd=2&ved=0CDQQFjAB&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2FpreviewBody%2F137316-102-1-277519%2FWeb%2520Intelligence%2520on%2520SAP%2520implementation%2520best%2520practices.pdf&ei=xofcTpSgF5DJrAeaxpiIBw&usg=AFQjCNHuwDIpvxciPKJyEdoz3GiVjRKgqA
http://www.scribd.com/doc/62293080/40/Query-Drill-for-hierarchies

BI Query with Hierarchy in VC does not get correct values

Hello Gurus,
I am building a model in VC for Performance Score card using Query as data service.
I have the following problem.
When I execute query in BEx with Hierachy_node variable , it is getting correct values, but the same is getting incorrect values in VC.
The Hierarcynode variable I am using is a TOP node, then the values including child nodes are also should be displayed, which is working fine with BEx query but not in VC.
When I execute the query with hierarchy node value as child node I am getting correct values both in VC and in BEx.
The correct values are not shown only when I use top nodes.
Please help me in this regard.
Thanks in advance
Ganesh

Hi
We are facing the same issue. Is this issue resolved? Pls let us know the solution
Regards
Aruna

Issue with Hierarchy Navigator

Hi there,
we have some problem with Hierarchy Navigator (EP 3.6).
We installed and configured Hierarchy Navigator (EP 3.6) as explained in Oracle documentation.
We created a Trade Spec "A" > We run Hierarchy Nav > System shows us one only row with the Trade >> OK
We linked a Material Output "B" (External Product) and its context in Related Specs Tab > We run Hierarchy Nav > System shows us:
     1 - The message “This hierarchy has recently changed. An accurate hierarchy should be available in approximately 1 minute(s).”
     2 - Trade “A” and the linked Material “B”
     3 - Formulation does not appear
After 1 minutes System shows us the message: “An accurate hierarchy is now available, Refresh to see the latest hierarchy.”
We click on Refresh button > System shows us:
     1 - The Trade “A” only again
     2 - Neither Material nor Formulation appear
Do we missing something?
I hope my question is clear, if not please do not hesitate to contact me.
Thank you very much.
Best regards,
Stefano

Sounds like two different situations.   Here are some tips:
1. Context has to be selected with the material associated to the trade for the formulation to appear in the hierarchy navigator.
2. In your last example, it sounds like a change was made to the hierarchy. Any change to the hierarchy will cause that message. For example, if you changed a packaging spec or selected context. The system will only show one level of the hierarchy while it's being updated.   I would need more information to know of you found a bug but it is possible. Seems like the material should have appeared though.

How can I authenticate and authorize with Web Service on ESB ?

Hello,
I want to authenticate and authorize client with Web Service published
by HTTP/SOAP BC.
Simply if it is an Web Service as J2EE application, I will use
Basic Authentication with JAX-RPC and Realm.
But I think that Web Service published by HTTP/SOAP BC is not belong
to J2EE Application. Threre is no place to describe security role mapping
(like web.xml).
JBI 1.0 the section "5.5.1.1.3 Normalized Message Properties" comments
JAAS Subject is given in the NM Properties. Really in this package
com.sun.jbi.internal.security.*
implements JAAS autentication and authorization (at JaasAuthenticator).
But I can't see how to configure my Service to use this.
How can I authenticate and authorize with Web Service on ESB ?
I referred to the resources.
Mutual Authentication for Web Services: A Live Example
http://developers.sun.com/prodtech/appserver/reference/techart/mutual_auth.html
XML and Web Services Security
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security7.html
JAAS Authentication Tutorial
http://java.sun.com/j2se/1.4.2/docs/guide/security/jaas/tutorials/GeneralAcnOnly.html
Thanks,
Takurou
- environment ---------------------------------------------
OpenESB : Project Open ESB Starter Kit
AppServer : Sun Java Systems Application Server 9.0 PE
OS : Windows XP
I don't assume to use SSL (if It's necessary I will try).
User information is stored in a LDAP Server.
-----------------------------------------------------------

Hello,
I read this resource.
SecurityDesign
http://www.glassfishwiki.org/jbiwiki/Wiki.jsp?page=SecurityDesign
Then I think [non-ssl and ssl/tls and so on] securing by basic authentication is ongoing feature at this time.
But I can't see well why this page comments 'HTTP over SSL, TLS'.
HTTP/SOAP Binding Component Overview
http://download.java.net/general/open-esb/docs/jbi-components/httpsoap-bc.html
Does BC support only "SSL server authentication" ?
Doesn't BC support "SSL client authentication" by username/password ?
Thanks,
Takurou

Cockpit - authorizations with hierarchy

Similar Messages

Maybe you are looking for