Code 10 error Device Won't St

I've done all the basic trouble shooting and still cannot get sound from
the PC (Soundblaster) card. Enabled device, unintalled/installed, etc.
Using HP with MS Media Center XP. A few weeks ago a Realtek audio manager
mysteriously downloaded...but when I checked there was no "conflict." Please
advise on situation.
Z Puffin

Originally Posted by sp4wn
MY ENGLISH ISN'T SO GOOD - I'M GERMAN
Hello people
first - great forum here has helped me very much to the overview.
Yesterday I got my first XFI - an old SB0460 with the black thing right - I guess Rev 1.0.
However, I did not get to run under Win 7 x64 so far. Whether with original driver or driver Daniel_K no success.
I got always "Code 10 - The device can't start"
Do I have to assume that is defective card?
Thanks for any help!
That could be the case, but I would try reinstalling windows first with that card. Because if you get the notification "device can't start" it really means that the card is detected so working but can not start for some reason. Also don't forget to switch off motherboard audio and do a bios update if possible.
Hmm, I wanted to write it in German but when I do that it only saves 1 sentence I will PM you in german maybe that works. So you understand everything.
Das k

Similar Messages

Code 10 error - wireless adapter

For some reason, and all of a sudden, my Linksys WMP54G wireless card has the code 10 error - Device cannot start.
I've searched and searched, un-installed, re-installed, tried different PCI slots etc and was even on the live chat to a Linksys 'Technical' support person last night (what a waste of time). I have the latest drivers.
Can anyone point me in the direction of anything that'll help me rectify the error. I asume it's an IRQ problem. The card was working well for 3 or 4 days and prior to that it was working for a couple of years in my old set up.
Coincidently, although it may be connected, ATItool had problems at exactly the same time, but I've now un-installed that......................
Any help is appreciated!
D.

Hi,
I just 'GOOGLED' code 10 error and all seems sorted for you------so----away you go. Hope this helps. Just reassign the resourse i think.
Regards Jabiru

Code 10 error for touchscreen using windows 8

We have a HP 42" monitor (LD4200tm) and the touchscreen feature does not work and we have a code 10 error - device not working. The panel works fine using Windows 7 and the drivers appear to be the most updated.

Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can't complete the operation because some data in the folder can't be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

Hi guys, an empty folder is stuck in my trash & I get this message: "The Finder can’t complete the operation because some data in the folder can’t be read or written. (Error code -36). It won't shift no matter how I try to Secure Empty trash. Any ideas?

The Time Machines Backup is formated as Mac OS Extended (Case Sensitive, Journaled), my mac is formated as Mac OS Extended (Journaled).
The names on the file are all Uppercase
When I try to copy the Aperture file, it copies about 70% of the file (it's about 33GB in size), and halfway through I get this error.
I'm able to copy 99.99% of all of the images if I open the Aperture Folder using the "show package contents" under the backups using finder (Time Machine Backups>Backups.backupdb>CQ Macbook Air>2012-04-30-070933>HD.....>Pictures>Aperture Library). The only file I can't copy is that picture, which I'm totally ok with deleting, but Finder won't delete it for me. If nothing else works, I could copy the individual masters and re-create the folders, however I'd hate to do this as I would have to go through 10,000+ pics

M550 SSD device won't start code 10

I have a Lenovo Ideapad Yoga 13, with Windows 8.1 as the OS. I installed a 256GB M550 SSD into the secondary MSATA port. For 1.5 days, the new SSD worked fine. After booting up this evening, Device Manager was reporting the following error. This device cannot start. (Code 10)
The request is not supported.Note that my BIOS is able to detect the SSD. However, rebooting and disabling/uninstalling the device and then enabling the device from Device Manager have not allowed the device to work. I have also booted with a USB drive and updated the firmware to the latest. Nothing seems to work. Does this mean the SSD is dead, after less than 2 days of operation?

So, I returned the SSD and got a replacement, and the problem occurred again. Problems only show up AFTER I enable bitlocker and AFTER I reboot. Every boot thereafter, the device shows up with the yellow exclamation in the Device Manager indicating a Code 10 error. The SSD also remains non-functioninig, even if I move it to a different laptop. Another interesting symptom that I observed is that after enabling bitlocker, I don't see the prompt for how I want to encrypt the drive. Every other device gets that user-prompt/query, except for with the M550.

No audio output device is installed(code 10 error), in compaq presario v6000

Hi,
I have compaq presario v6608AU laptop with vista OS installed
I got a small red cross mark near the sound icon in the taskbar.
I read the forum and tried all possible ways to get back the sound but nothing worked.
when i switched on the bluetooth, it shows audio connected to bluetooth but no audio in laptop
In device manager i was not able to find any drivers for laptop audio but wireless audio is installed.
I tried downloading audio driver for my notebook but it doesnt get installed, saying no audio device found code 10 error
It would be a great help if some one would help me.
Thanks,

Hi,
Please follow the following link
http://support.microsoft.com/kb/2011656
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

Apple Mobile Device USB Driver (CODE 52 Error)

I've been trying to sync my ipod touch with my laptop computer. I recently updated my version of iTunes, and now can not get my ipod to sync with my computer. The problem is in the Apple Mobile Device USB Driver. The error I am getting is a Code 52 error which states: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source." I've tried uninstalling the USB driver along with iTunes and all the related software. I have a windows 7 notebook. Any help resolving this issue would be greatly appreciated.

Hi ADziack24,
Thanks for using the Apple Support Communities. The following resource includes an entire section dedicated to the error you are receiving. The steps may help to resolve your issue:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
http://support.apple.com/en-us/TS1538#error52
- Matt M.

Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net.

Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solved

Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Hello,
I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
"Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
My configuration:
Mid-2012 MacPro
OSx 10.8.5
Adobe Creative Suite CS5.5 (Encore CS5.1)
Internal MCE Technologies Blu-ray burner
I appreciate any help and support!!

The Code 3 AS_StorageError comes in many variations.
Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it. I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only. The disc shows 24.37 GB used on a single-layer BD.
The files are conformed and as the build begins, the following error pops up:
Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
System info:
Windows 7 Professional
Service Pack 1
Intel i7 8 cores @ 2.80 GHz
12 GB 1600 RAM
AMD Radeon HD5870
WD 3TB HD 7200 RPM NTSC file system
Pioneer BD-RW BDR-206 ATA burnerncore
Adobe Encore CS6

I do not see another example of this error with the "97060" in it.
I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

Get Error/Response Codes from the device

Is there a way to get the error/response codes from the device without using a try-catch and getting the ErrroeCode hidden in the exception? I am using the C# API version 4.1

Probably not.
All the error/response codes or exceptions are handled under the namespave of NationalInstruments.FieldBus.ExceptionHandler.FBException which includes a lot of children for different exceptions.
Please refer to the namespace of NationalInstruments.FieldBus.ExceptionHandler.
Thanks
Chris

Intel 82579V network controller "This device cannot start" (code 10) error"

I've just finished installing a Z77A-GD55 motherboard and had a problem where the Intel 82579V network controller wouldn't start after a cold boot. Device manager would show “This device cannot start" (code 10) error”.
After a reboot it would work every time. During the time it didn't work the adapter was incorrectly shown in device manager as 82579LM. There's an older thread about this issue but the fix described there were of no help with my problem.
After a lot of searching I found Intel has provided a fix for people having this issue after sleep mode so I gave it a try and it seems to work for my issue too, so far anyway.
So if anyone else is having this problem with the same Intel network controller I suggest giving this try.
Go to the Intel Download Center and search for 82579V. Select the first result entitled "NVM Update Utility for Intel® 82579V Gigabit Ethernet PHY Network Connection" and follow the instructions. Good Luck!

Thanks for the information.

Code 10 error Device Won't St

Similar Messages

Maybe you are looking for