Code 10 error for 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter'.

Last week, i tried setting up hotspot manually using CMD window. But it failed and the system stopped detecting wifi altogether. i tried installing the driver 'Broadcom BCM43142 802.11 bgn Wi-Fi Adapter' but it shows up 'code 10' error after installing it. Please suggest suitable measures to restore wifi connections.

Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

Similar Messages

  • Code 10 error for touchscreen using windows 8

    We have a HP 42" monitor (LD4200tm) and the touchscreen feature does not work and we have a code 10 error - device not working. The panel works fine using Windows 7 and the drivers appear to be the most updated.

    Hi: See if this works... Download but don't run this driver... The package contains Broadcom Wireless LAN driver. It is required to enable integrated Broadcom Wireless LAN adapter. File name: sp68301.exe Go to the device manager, right click on the problem Broadcom wireless adapter. Select Uninstall and check the Uninstall Driver box. Reboot and see if installing the driver I posted above installs the device properly.

  • Vendor Code 6502 error for SQL pane of existing View

    When I am in the SQL pane of an existing valid view, it hangs saying "Generating DDL....". When I cancel, I get the vendor code 6502 error - the View is a simple select from a Materialized View. We have other Views that select from the same MV, but have no problems showing the View source in the SQL pane. . ( I can see the view source with no problems using Toad). Any ideas ?
    Thanks,
    Anne

    Hi rkonno!
    The ORA-904 tells you that PROJECT_PROGRESS is an invalid identifier. Is this the correct columnname?
    yours sincerely

  • BW code page error for receiving sysem.

    Hi friends,
    We are getting following error in BW when We are trying to load data:
    "Could not find code page for receiving system",
    Our BW is Unicode and the R/3 is nonunicode
    Referred to the OSS notes 784381 and 613389
    We have checked we21, we22 and logical system and rfc connections and done the following bit checked :
    Language “EN” is specified in sm59
    Under Special Options -> RFC Bit Options
    Made sure that “Use Found Communication Code Page” has a check mark.
    We keep getting the following error...
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination BRQCLNT500, you want to determine the code
    page in which the data is sent with RFC. However, this is not currently
    possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed.
    3. The logon language is not installed in the target system.
    Please help   and I will definely reward points.
    Thnaks

    hi Brent,
    try to check the S10010 source system, rsa1->source system->righ click 'check'. also check the connection and authorization for S10010 in sm59 ? you may need to restore, source system S10010 right click 'restore'. hope this helps.

  • Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

    Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

    The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names.  This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
    for this DNS name exisits in the DNS database.  Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
    service on this computer is restarted.

  • Error in code page mapping for Source system whil loading the data from ECC

    HI Gurus,
    I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
    In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
    Please let me know if there are any settings needs to be made.
    Many thanks in Advance
    Jagadeesh

    HI V,
    Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
    Do we need to do any settings in LBWE??
    Thanks and Regards
    Jagadeesh

  • Error in code page mapping for Source System

    Hi All,
    We are Loading data into BI system from MDM System.
    It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
    Message Class: RSDS_ACCESS 13.
    We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
    Any pointers for this error will be Helpful.
    Regards,
    Mayank

    Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
    any advice.. ?
    Edited by: Edi Erwan  Abu Talib on Jun 22, 2009 8:22 AM

  • 500 Internal Server Error OracleJSP: code too large for try statement catch

    We have an application which uses JSPs as front end and we are using Struts 1.1. When we run one of the JSP it shows the following error after executing .We are using OCJ4 server having version 9.0.4.0
    500 Internal Server Error
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:E:\oracle\product\10.1.0\AS904\j2ee\home\application-deployments\VAS3006\vas\persistence\_pages\\_Requirement .java
    code too large for try statement catch( Throwable e) { 
    7194
    code too large for try statement catch( Exception clearException) { 
    44
    code too large for try statement try { 
    23
    code too large public void _jspService(HttpServletRequest request, HttpServletResponse response) throws java.io.IOException, ServletException { 
    The JSP/application runs okay on one machine (System Tesing machine)with OCJ4 server having version10.1.2.0 but throughs an error on other machine( Development machine)with OCJ4 server having version9.0.4.0.The question is why it is running on one machine ane giving error on other machine I am aware that there can't be more than 64kB of code between try-catch block .Total size of the generated JSP class in our case is 577KB.
    Is the problem because of different version of Application server OC4J?.Is it any fix for this? Or Can anyone please suggest a work around. Or is there a method by which the JSP generated code is split between different try - catch blocks rather than a single try-catch block.Utlimately We don't know the whether is it a problem with JVM or hardware .
    It would be really helpful if you would provide me with some suggestion and input.
    Regards
    Shyam

    Sir,
    I am aware of the limitations of JVM that it won't allow java code more than 64Kb in method but we are using different versions of Application server .Application is working okay with OC4J application server(10.1.2.0) but gives error on Application server with version 9.0.4.0. Is this a problem with OC4J application server 9.0.4.0. I had gone through the documentation ofOC4J 9.0.4.0.application server but it does not mention about the this bug/fixes.
    Please giude me on the same.
    Regards,Shyam

  • Error in jsp:Code too large for try statement

    Hi friends,
    When i try to run a jsp program i am getting error "code too large for try statement". How can i rectify it rather than truncating that jsp? is there another way?
                                                  Basha

    Basha,
    When we were implenting an e-form component which was very big, the only way we were able to achieve it was by
    "jsp includes". In the main form simply included muliple
    jsp pages, where each was a section of the e-form.
    we have not found any other better way.
    Hope this helps.
    -Venkat Malempati
    Message was edited by: Venkat Malempati
    Message was edited by: Venkat Malempati

  • Syntax errors for smarty code

    I work with smarty a lot, and I mean a lot.  Every single day in fact, all day long.  Is there a way to turn off the syntax errors for my smarty code?  Basically every file I open is going to tell me there are syntax errors all over the page...
    Thanks!

    I am not familiar with smarty but the options for disabling syntax errors can be found under the view menu,
    View > Code View Options > Syntax Error Alerts in Info Bar (tick or untick)
    Richard

  • How do you avoid a code too large for try statement error message while com

    i have the jsp which is having 142 fields
    i am trying to dispaly 142 fields its showing the above error
    at runtime
    i think JVM is not allowing to complie the jsp
    please any body give me the solution for it

    I've got the same error with Weblogic 8.1 .
    When I tried to visit a JSP I wrote, which had many tags, the page showed the error: code too large for try statement.
    I'v reviewed a lot of discussions through the internet and solved the problem at last by adding one parameter to weblogic.xml.
      <jsp-descriptor>
         <jsp-param>
              <param-name>noTryBlocks</param-name>
              <param-value>true</param-value>
         </jsp-param>
      </jsp-descriptor>Hope this may help you out.

  • SMTP Error Code : 530 . For more information, see your SMTP server manual.

    Hello,
    I am Getting
    "SMTP Error Code : <530>. For more information, see your SMTP server manual" error, While configuring SMTP in Data Services 4.0 system. I have tried executing the SMTP_TO function on another DS machine which has 3.2 verion installed, but getting the same error.
    FYI,
    1) Able to telnet the Exchange server through Data service machine
    2) Maintained SMTP settings in Data services server manager
    3) using the same SMTP server host name in other SAP systems (ECC,BI,PI) etc and able to send mails.
    Regards
    Puneet

    Thanks for the reply Julian.
    There was a problem in SMTP relay rights on Exchange server. Able to send mails now. Thanks!
    Getting another problem wherein I am not able to send mails to multiple recipients i.e. If I specify 5 recipients in SMTP_TO function and execute the job then Every individual is getting E-Mail having there own ID in TO field, other Id's are not gettting displayed in TO field.
    I hve checked note "1276348 - smtp_to function - multiple recipients not displayed"
    Settings mentioned in the note have been done and job is getting executed without any error but the mails are not getting delivered.
    It would be great if anyone can suggest on how to proceed here.
    Thanks & Regards
    Puneet

  • Error: code too large for try statement, when compiling a big java file.

    Hi,
    I have a big java file ( around 16000 lines). When compiling it, I got following error message:
    MyMain.java:15233: code too large for try statement
    } catch ( Throwable t ) {
    In MyMain.java, I just repeat following statements about 1000 times.
    try {
    if ( year >= 2002 ) {
    System.out.println( "year: Evaluation version is not valid" );
    } else {
    System.out.println( "year: Evaluation version is still valid" );
    } catch ( Throwable t ) {
    if ( year >= 2002 ) {
    System.out.println( "year: Evaluation version is not valid" );
    } else {
    System.out.println( "year: Evaluation version is still valid" );
    I tried 1.3 and 1.4 javac compiler, there was some error.
    How to make compiler to compile this code?
    Thanks,

    Hi,
    I have a big java file ( around 16000 lines). When
    compiling it, I got following error message:
    MyMain.java:15233: code too large for try statement
    } catch ( Throwable t ) {
    I tried 1.3 and 1.4 javac compiler, there was some
    error.
    How to make compiler to compile this code?
    You don't. Each method has an absolute limit on the number of byte codes. You have reached that limit. The limit is part of the specification and JVMs will refuse to run classes that exceed the limit. So even if you could compile it, it wouldn't run.
    It is quite common for code generators to generate large monolithic blocks of code. Presumably this is how you got to this spot. Modify the code generator to break it into smaller blocks.
    If you did it manually then you did it wrong. And you will have to manually break it into smaller blocks. (And re-examine your design since it is probably wrong.)

  • Testing ABAP Web dynpro: Error  code 403 and for the reason Forbidden

    Hi,
      We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
      Thanks
    Arunava
      However we are getting the following service error
    Service cannot be reached
    What has happened?
    URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system XXX with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team

    Hi,
      this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
      However for some ABAP web dynpro ( for some application XRPM ) I get  some peculiar error. Please see below and if you could think of anything out of these.
    I have already checked and found the both HTTP and SMTP services are working fine.
    The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
    The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP

  • 'The termination occurred in system E03 with error code 403 and for the rea

    hello gurus,
                     i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
    i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
    Service cannot be reached.
    'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
    for this we need to activate some service at sicf transaction level.
    could anybody suggest me which service i need to activate to overcome my problem.
    best regards,
    raja.

    If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
    http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
    First check above one.
    this is for understanding
    http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
    Regards
    Srinivas

Maybe you are looking for