Code 101

i have downloaded cs6 trial off the web site but after takeing 7 hours to download it has the error mesage 101  check disc space i have 85 gig free

As stated it means little but let's say you drive is at least 250GBs then you are dangerously low on freespace for a scratch disk alone let laone apps and storage. You have to condiser replacing that disk with a larger one or usining external storage. Then of course if you have so many files on your disc that you are this low in free space then you must have a fairly fragmented disk as well, from saving and deleting and moving files anbd replacing as well.
So you might need a utility to defrag the disc if you do not want to replace it or add external storage.
uB seriously consider getting more storge space.
Now wah 101 means is another thing altogether. On a Mac it is a memory issue and that could also relate to the scratch or your RAM how much RA M do you have 8GB is a good amount 2GB it might work but it might not depending on what other apps are running and what your system requires and of course if your scratch is healthy and clean and not fragmented and large enough.

Similar Messages

  • [Beta 6] Camera is crashing on simple code with exit code 101

    First time it was perfect
    Second time application failing with exit code 101
    If I don't use result image. For example remove line: imageView.image = image;
    then it works!
    Any ideas?
    [q]
    - (void)showCamera {
    // Set up the image picker controller and add it to the view
    UIImagePickerController *imagePickerController = [[[UIImagePickerController alloc] init] autorelease];
    imagePickerController.sourceType = UIImagePickerControllerSourceTypeCamera;
    imagePickerController.delegate = self;
    imagePickerController.allowsImageEditing = NO;
    [self presentModalViewController:imagePickerController animated:YES];
    - (void)imagePickerController:(UIImagePickerController *)picker
    didFinishPickingImage:(UIImage *)image
    editingInfo:(NSDictionary *)editingInfo
    [picker dismissModalViewControllerAnimated:YES];
    imageView.image = image;
    [/q]

    did you ever figure this out?
    i am having the same thing, but i assumed it was an out of memory problem...

  • Error code 101

    Anyone else have plenty of room on their computer and getting error code 101 when it is extracting cs5?  I really need this to open for a class I am taking

    Where did you try to save the file too?  I would recommend completing Solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1.  Once done begin the download process again this time making sure to select your User folder or Desktop for the location to download the install files too.

  • Return Code 101

    Dear all,
    I encountered the below error while loading a master data attribute via process chain:
    "Return code 101 when converting field /BIC/MA1SDIV0 in record 109."
    Could anyone please guide me?
    Thank you.
    Rgds,
    Ann

    Hi Ann,
    Can you check if there is anything different for the record 109 in the PSA.
    Bye
    Dinesh

  • Error parsing enveloped data (Error Code: 101): Cannot decrypt request

    When my player requests http://<server>:8080/flashaccessserver/<tenant>/flashaccess/license/v1 the following happens:
    - HTTP 500 is returned
    - in the log file, an ERROR is appended, copied below:
    [#:10] 2011-01-14 12:19:37,381 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
    [#:10] 2011-01-14 12:19:37,385 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ]
    Error occurred processing license acquisition request
    com.adobe.flashaccess.sdk.protocol.HandlerParsingException: com.adobe.flashaccess.core.pkcs7.PKCS7Exception: Error parsing enveloped data (Error Code: 101):
    Cannot decrypt request
            at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:73)
            at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
            at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
            at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
            at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
            etc...
    The Validator says that the config is ok, but I can't get this /license/v1 url to work.
    Can you help?
    Thank you!

    I have managed to get past that 101 error, but now there is another error... and I have no idea where to continue... can you help?
    Thank you in advance!
    This is my log file:
    [#:3] 2011-01-14 16:38:53,623 INFO  [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/, file:/opt/adobe/flashaccess/tomcat/licenseserver/flashaccessserver/libs/flashaccess-licen se-server-ext-sample.jar]'
    [#:3] 2011-01-14 16:38:53,626 DEBUG [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Started processing request...
    [#:3] 2011-01-14 16:40:26,933 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine ] Error occurred processing license acquisition request
    java.lang.UnsatisfiedLinkError: com.rsa.Native.JN_SHA1.NativeDigestInit([B)[B
            at com.rsa.Native.JN_SHA1.NativeDigestInit(Native Method)
            at com.rsa.cryptoj.n.fN.a(Unknown Source)
            at com.rsa.cryptoj.n.qE.a(Unknown Source)
            at com.rsa.cryptoj.n.qE.f(Unknown Source)
            at com.rsa.cryptoj.n.bA.a(Unknown Source)
            at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
            at com.rsa.jsafe.JSAFE_Signature.verifyInit(Unknown Source)
            at com.adobe.flashaccess.core.crypto.jsafe.RSASigVerifier_JSAFE.<init>(RSASigVerifier_JSAFE. java:46)
            at com.adobe.flashaccess.core.crypto.RSASigVerifier.getInstance(RSASigVerifier.java:30)
            at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:82)
            at com.adobe.flashaccess.core.pkcs7.SignedDataVerifier.verify(SignedDataVerifier.java:164)
            at com.adobe.flashaccess.core.pkcs7.SignedData.verifySignature(SignedData.java:335)
            at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.parseMetadata(V2Conten tMetadataImpl.java:189)
            at com.adobe.flashaccess.core.media.drm.keys.v2.V2ContentMetadataImpl.<init>(V2ContentMetada taImpl.java:155)
            at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.parseLicenseMessage(Lice nseRequestMessage.java:565)
            at com.adobe.flashaccess.sdk.protocol.license.LicenseRequestMessage.<init>(LicenseRequestMes sage.java:137)
            at com.adobe.flashaccess.sdk.protocol.license.LicenseHandler.parseRequestMessages(LicenseHan dler.java:128)
            at com.adobe.flashaccess.sdk.protocol.AbstractBatchHandler.parseRequestMessage(AbstractBatch Handler.java:124)
            at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:75)
            at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :193)
            at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest(LicenseEngine.java :63)
            at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest(Abstract Engine.java:70)
            at com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost(License EngineDelegatorServlet.java:53)
            etc.

  • Cash Flow (Direct Method ) Report ( T-Code S_ALR_870_12271 ) not Working

    Hi All,
             I am trying to run Cash Flow (Direct Method ) Report with T-Code S_ALR_870_12271 but it's showing Output  as following .
         No records were selected          
         Table     Financial Statement Key Figures
         Report name     0SAPRATIO-04
         Report long text     Cash Flow (Direct Method)
         Form     0SAPRATIO-04 Cash Flow (Direct)
         Report type     Form report
               General information          
         A     uthor          SAP
         Created on     06.02.1996
         Last changed by     ABAP1
         Last changed on     25.03.2009
         Last changed at     17:42:09
         Last displayed on     25.03.2009
         Number of times displayed     18
         Basic list     Detail list
               Additional selection conditions     
         C     ompany Code     101     0 HGSL INDIA
         Currency Type     10 Company code currenc
         G/L Account     60000000
         G/L Account     60000000
         Bal.sheet type     1 Standard financial s
               General data selections          
         P     lan./act. ind.          0    Actual
         Fin.Stmt Vers.     INT  Financial Statement
               Variable          
         F     iscal year          
         Fiscal year     2008 2008
               Selected characteristics ( Online sort order )     
         G     /L Account     *     
         Business Area     *
         Company Code     *
         Period     *
               Columns selected for drilldown list     
         F     iscal Yr ;2008          
         Fiscal Yr ;2007     
               Rows selected for drilldown list     
         +      Sales revenues          
         + Incr.dwn pmts rec.     
         - Incr.recvbls f.G&S     
         Sales collections     
         + Material costs     
         - Incr.in pybls G&S     
         + Incr.dwn pmts made     
         Material disbursmnts     
         + Personnel costs     
         - Incr.in pens.prov.     
         Personnel disbursmts     
         + Oth.int./sim.incme     
         - Interest expenses     
         - Increase in discnt     
         + Inc.fr.investments     
         + Due to prof.trans.     
         + Inc.f.oth.securits     
         Financial collectns     
         + Other operat.inc.     
         - Gns f.retr.sp.itms     
         + Increase in AE/DI     
         Oth.operat.collectns     
         + Oth.operat.expnses     
         - Optional add.items     
         - All.sp.itms w.res.     
         - Incr.in oth.provs     
         + Inc.prpd/defr.itms     
         Oth.operat.disbrsmts     
         + other taxes     
         - Incr.in tax.prov.     
         Income tax     
         = Cash flow (total)     
               Particular sort orders          
         G     /L Account          G/L Account Long name Ascending
         Company Code     Company Code        e Ascending Long name Ascending
    Plese Help me out ...
    Thanks
      Amit

    Hello Ajay
    It happens due to different settings mostly in FORM e.g. FSV set in the form would be INT where as you have your own FSV.  Similarly you need to check each and every item and change suitably.
    Run the report via above tcode again, then a screen will appear saying u201CNo records were selectedu201D
    In this screen you can see the FSV used in General Data Selection (4th box) which you need to change by pushing u201CFORMu201D push button on the extreme left side, > Go to edit menu>Gen data selection > make changes suitably.
    However do not make changes to the standard report / form, so copy the standard report with your own naming and make the changes where ever required.
    Hope it works!
    Ambadas

  • Account Code & Name in XL Reporter

    Dear,
    I want to fetch the Account Code & Account Name in XL Reporter.
    So please help me for this issue.
    i use  =ixDimGet("FIG", "BatchNum_0") formula
    but it's give me the 0 as Account Code.

    Dear Shwu,
    Thanks for reply.
    But i want the display Account & name wise whole Purchase report.
    For example,
    if Purchase Invoice No  : 5 & Item No : 10 (Acct Code : 101),11(Acct Code : 102)
    Purchase Invoice No : 6 & Item No : 10(Acct Code : 101),12 (Acct Code : 103)
    so now report will be diplay as below format.
    Acct Code  Purchase DocNo Item No
    101
                           5                          10   
                           6                          10

  • Quicktime Error -101

    Hi there,
    Quicktime X won´t play videos. Error Code -101 pops up. Preview doesn´t play videos either...
    OSX Lion 10.7.1
    Thanks,
    Markus

    Same problem. OSX 10.7.2

  • In transit movement codes - missing amounts

    Hi,
    In one of my clients it's been implemented the "in transit" inventory procedure (still in development).
    We went from having movement codes 647 and 101 in one step, into 641 and 101 in 2 steps. The problem that I see here is that when I go to check field "BW: Cost Val. in Local Currency" or "Local curr. amount", the values for movement code 101 is zero, while in the 641, I get the correct amount, and I need them completed in BW.
    Is there any modification in the configuration that could be missed here?
    Any idea on how we can have these fields correctly completed from the ECC side instead of BW?
    Any help will be really appreciated.
    Thanks,
    Miriam

    641- Is two step procedure wherein Stocks are removed from Unrestricted stock of sending location & place it in of stock in transit at recipient hence stock will reflect In Transit. On receiving goods recipient will take goods receipt with movement.
    On the other hand 647 is one step procedure wherein goods receipt (101) is added automatically, so that the goods receipt is posted at the same time as the goods issue. hence stock will not be reflected in Transit

  • Overclocking the i7, a beginners guide

    To give credit where credit is due: This was not written by myself. I have only edited parts of it.
    I found this on the internet, but it was such a great article, that I wanted to draw your attention to it. Credits go to Chad. Thanks for all the effort you put into this.
    What is overclocking?
    Overclocking is a process of making various components in a computer to go faster than their stock speeds. So if you buy a processor (lets say an i7-920 2.66 GHz) and make it go faster (lets say 3.6 GHz), that can be deemed as overclocking.
    HALT! Do not proceed any further until you have read this:
    Dell, Gateway, eMachine, etc... do not overclock very well, so proceed at your own risk. You break it, it is your fault.
    A little bit more of some explanation:
    This guide is intended to explain how to overclock and its uses. It was made for those who have computers (moreover, motherboards and other components) that support overclocking. If you bought a brand of computer like Dell, Sony, Gateway, HP, eMachine, or any other crappy PC (not saying all of them are) that comes for a store like Walmart, Best Buy, or Circuit City, then this guide does not pertain to you. Even though it is possible to overclock these systems with software, it is not recommended nor advised. This guide is meant for anyone who has a motherboard made by ASUS, GIGABYTE, Abit, DFI, (sometimes Intel), or any other well known brand known for their boards and overclocking abilities. But be forewarned, not all boards made by these companies are made to overclock. Check and see if yours does before going any farther than this final line.
    Note: There are ways to bypass hardware overclocking via software, but it is not recommended and can make your PC unstable, even rendering it unable to stay stable till the system is returned to normal. Overclocking software is made for boards that supports overclocking so that changes can be made without having to restart.
    Further notes:
    -Motherboards not designed for overclocking will not go as far in overclocking, become unstable sooner, and heat far quicker.
    -Computers with boards that do not support overclocking do not have adequate cooling.
    Why would you want to overclock if it could be damaging?
    Simple, to get more out of what you payed for. Overclocking is similar to going and upgrade a car's engine by boring out its piston chambers and adding better fuel injection, air intake, transmission, etc..., but there is always a risk in doing so. But it all boils down to one thing: performance. It is hard to fry your system if you are careful and know what you are getting yourself into. If you are careful about what you do, then it is rather hard to do any kind of permanent damage to your system by pushing it to its sheer limits.
    As with any kind of performance enhancement, there is a level of risk involved. The first and foremost danger is heat. Heat will degrade and damage your components beyond repair if left unchecked and will most definitely lower your system's life span. When you overclock, you are making your computer do more work than it is used to, thus it is going to generate more heat, so having a good cooling system is essential. If you do not have sufficient cooling, then your system could and will overheat. Overheat by itself cannot kill your computer though, the only way for that to happen is to repeatedly overheat it time and time again past the recommended temperatures. YOU SHOULD ALWAYS TRY TO STAY AT OR BELOW YOUR CPU's MAX RATED TEMPERATURE! If you go above this, you can risk harming your CPU. Do so at your own risk. Run your CPU at 5-10C above its max temp for short periods only and ONLY for benchmarking purposes only. DO NOT DO IT FOR LONG TERM!
    And as luck would have it, you do not have to be overly worried about your system overheat as there will be signs before you system becomes a fried potato. Random crashes are probably the most common sign. Overheat is easily prevented by the use of thermal sensors which can tell you how hot your system is getting. If you see temperatures that you think is too high, then either run at a lower speed, or get better cooling, which I will cover later on.
    The other danger of overclocking is voltage. Too much, and you can significantly shorten your components' lifespan. A small boost will not do much, but if you plan on a rather hefty overclock, you may want to be aware that it will decrease the lifespan of your computer's components. But this is usually not an issue since most people who will overclock do not use their components for more than 4-5 years and there is a good chance your components will not fail before 4-5 years regardless of the voltages running through it. Most processors are designed to last in upwards of ten years. So most of the time, loosing a few of those years is worth the performance gained for overclocking.
    Disclaimer for my own protection:
    WARNING!!! READ THIS DAMN WARNING!!! I DO NOT WANT TO HEAR YOU WHINE YOU BROKE YOUR COMPUTER SO READ THIS WARNING!!!!!!
    Overclocking can really mess things up, and it wares down your hardware and its life-expectancy. In other words, the more you overclock, the shorter your computer will live (like how an F1 car's engine must be replaced after every other race). If you attempt to overclock, then I am not responsible for any damage or destroyed hardware when using this guide. Follow at your own risk.
    Overclocking
    This guide is meant for beginners and not for people looking to squeeze out every last bit from their processor. That’s when things become extremely motherboard specific. The goal of this guide is to try to make overclocking the core i7 an easy and enjoyable experience. Overclocking your core i7 is a must; if you don’t you’re a chump. This guide will focus more on core i7 920s, but ideas will probably carry over into EE and higher end chips with locked multipliers.
    Recommended hardware:
    1. A good cooler (Do not use stock if you plan to go past around 3.5. You will run your processor way too hot) (Noctua, ThermalRight Ultra Extreme or Megahalem are my preferred ones but read around.
    2. DDR3 1600+ - You can get away with 1333 but with ram being as cheap as it is, why not.
    3. Pretty much any x58 board (although some are better than others, read some reviews).
    4. A good PSU with an EPS(8 pin) plug.
    5. Paper, Pencil, and Patience – Write things down so you can remember your successes and failures. There is not much to play with in terms of the i7, but keeping track of what you tried can eliminate any frustrating experiences and also allow you to go back to a known stable settings.
    Recommended software for stability testing:
    1. Prime95.
    http://www.mersenne.org/freesoft/
    2. Memtest86+ http://www.memtest.org/
    3. Realtemp http://www.techpowerup.com/realtemp/
    4. CPUZ - http://www.cpuid.com
    Many people have personal favorites but the above are what I use.
    Not all I7s are created equal:
    1. So you read on a thread that someone hit 4 ghz on a C0 stepping processor with only 1.28 vcore and you’re wondering if yours will do the same. It’s doubtful, but who knows. It may take you up to 1.4 volts at least with a C0. That’s life; if you're unhappy, sell it and buy a D0.
    2. Not all i7s have the same quality IMC (Integrated Memory Controller). Some are more temperamental than others and will refuse to run your ram at its rated speed without a huge raise of qpi/uncore (VTT). This is not common and often it can be a sign of the quality of the ram.
    3. For the most part, D0's overclock higher and at lower voltages than C0 chips, due to refinements in the fabrication process. Late C0 chips benefitted from the same refinements, and random other batches hit 4.0 ghz at really low volts. I have been told that some D0's do not hit 4.0, but most will do so at a lower voltage than most C0's. A D0 is a more desirable chip, but it's not a must and this guide is still useful to owners of C0's.
    4. Toms Hardware article about speed vs power consumption is flawed and based on one really terrible C0 that needed 1.5 vcore to hit 4ghz. Is a D0 at 1.2v at 4 ghz going to consume more power than a C0 at 3.6 and 1.32 volts? No. The D0 will use less. Power consumption at any given voltage will increase about 3-11 watts (avg 5 for every 100 mhz you increase). Something brough to my attention recently though is that this may differ because some chips are leakier than others. A D0 is by no means a guarantee that it will consume less power.
    5. If you want to reach higher clocks, you may need a better motherboard, cooler, chip or whatever. This guide is not for advanced overclockers.
    Key Terms and Settings Quick Guide:
    BCLK – Base Clock - This clock controls your memory speed, QPI speed, and core speed based on whatever multiples for those settings you have. It's the most important part of overclocking the Core i7. It's stock setting is 133
    Uncore – This is basically the speed of everything which isn't your core (i.e. L3 cache, IMC, etc). It should be 2x your memory speed but allows for multipliers higher than 2x as well. Stability will be greatest at 2x.
    QPI – Quickpath interconnect - It's basically the intel equivalent of AMD's hypertransport. It's how the CPU and the X58 chipset communicate. It has multipliers of 18x, 22x, and 24x. The 920 should be left at 18x creating a 9:8 ratio between the uncore and the memory multiplier assuming you use the 8x ratio, which some claim offers the greatest stability. Although people have been able to run it at all sorts of ratios.
    Memory - Memory is calculated based on either a 6x, 8x, 10x, 12x, or 14x of your base clock. I recommend 6x and 8x. Depending on your mobo bios it may be called ratio or multiplier.
    Ram Timings – This guide will only deal with the first four and the command rate. There are other guides regarding these. You can use XMP (intel's memory profile system) to have these values plugged in but it may set your QPI/uncore voltage automatically to 1.35 which may be more than you need (although it will be stable).
    Turbo mode – This enables the 21x multiplier on the chip. Most boards allow you to do this with eist disabled, but some boards require it enabled. See if a newer bios lets you change things.
    CPU Multiplier – On the 920 the range is from 12x – 21x (22x on one core when at stock speeds). It has been found that the 19x and 21x multipliers are more stable than the 20x.
    Vcore – Voltage of your cpu. See below for tweaking instructions.
    PLL – phase-locked loop – Just use the settings recommended below (1.8 – 1.88 is within specification).
    QPI/Uncore (VTT) – This voltage is the VTT although it does play a role in feeding the IMC with voltage enough to overclock your ram, the L3 cache and a number of other things (Specification is that it should be less than 1.35 but when taking droop into account you can go higher, probably 1.4 is safe. Some ram modules have XMP profiles which call for higher QPI so some will argue that this is safe. I'm not going to argue one way or the other.)
    Vdimm – Your ram voltage (Specification says 1.65 max but 1.66 is fine and so is a bit higher depending on your QPI/uncore voltage).
    Important to do before you overclock:
    EIST – Enhanced intel speedstep technology - It's a power saving tech that should be disabled while testing overclocking stability. This should be disabled while finding your OC, but can be enabled after you are stable (Disable if you have stability issues).
    C1E – Another intel power saving technology. Disable while overclocking, enable afterwards.
    Anything Spread Spectrum – Disable it.
    PCIE frequency – Always at 100, but see FAQ questions below.
    LLC - Load Line Calibration - This gets rid of vdroop when enabled and can help stabilize overclocks. It breaks intel spec, but it is highly recommended to enable it, since it will reduce the needed vcore for a stable OC. The argument for vdroop is that it's a standard and reduces voltage spikes. I have not been able to find anyone who's done any damage by enabling LLC and thus disabling vdroop. In an old anandtech review from 2007 they found that it increased power consumption on an X38 asus board; a newer xbitlabs article using X58 found that it actually decreased with more threads or was otherwise the same. This guide pretty much assumes you use it, but like anything else you are taking the risk. Then again, on my board, enabling it doesn't give you any red letter warning like when you maybe tap your vdimm above 1.65.
    All other settings leave at auto unless needed for stability.
    Initial steps:
    If you've played around with any settings before reset your bios to its stock options. There's probably no need to reset your CMOS, but it can't hurt; if you don't know how to reset your CMOS then I suggest you learn to do so. It's unlikely that you will have to as most modern motherboards will usually have some sort of protection against bad overclocks and automatically allow you to reset the bios upon a bad boot.
    Once your bios is at its stock configuration disable EIST, turbo mode, C1, and any other power saving options that may interfere with an overclock as well as any spread spectrum settings. Now, boot into windows (If you want to use the 21x multiplier then go right ahead and set it as long as you can do so without enabling EIST). Open up cpuz, load up prime and see where the voltage goes. This is your approximate vid for stock. The chip may very well run under this voltage, but this is the vid that the bios is seeing.
    From here we have a number of different methods we can try. I always change my BCLK in my bios settings so that anything set to auto will adjust itself if need be, although you are free to use whatever windows based tools you want although beware of any problems they may cause you.
    You should always set your memory to 8x or 6x depending on what you have and your uncore to 2x the memory. Leave the QPI at the lowest setting.
    Set windows not to restart on a bsod (You want to know what the error was): 
    Windows XP and Vista Directions, but it is the same for Win7.
    Method #1: Optimizing for max performance per watt.
    This method takes by far the most amount of time but for many its worth it in terms of its power efficiency.
    Begin by going into the bios and changing your voltage to your vid and setting QPI/uncore (VTT) to 1.25 (I have raised this due to concerns about droop at 1.2) and vdimm to 1.65 (Most boards can't do this; 1.66 is safe, ignore your spaz bios warnings; you are not going to explode anything, although if you do, it's not my fault. Set it to 1.64 if it helps you sleep easier. I recommend at this point to be working with either the 21x multiplier if possible in order to keep your ram as much out of the equation as possible. 20X has known problems and 19x will land you with high ram speeds quicker which will require raises in the QPI/uncore voltage sooner.
    Open up real temp and run Prime 95 with 8 threads and check stability for an hour at least (The more the better. I recommend overnight just to make sure all is good). Record your settings on a piece of paper or email them to yourself. Make sure to have Realtemp open in order to watch your temperatures. Temperatures should not exceed 80-85 during Prime. During normal use for extended periods, they should never see these kinds of temperatures. I like to keep mine below 70 for normal usage.
    After its stable go into the bios and increase the BCLK by 10 and repeat the process. Find the max BCLK for your stock vid (or any voltage, if you'd like by lowering by smaller amounts when you find an unstable clock. This will help you know what you can run at any given voltage.
    See below for known Prime 95 errors and how they relate to your settings (also some settings to try for stability). Once you get to the clocks you want, I recommend running Prime for at least 16-24 hours. I have in fact had errors in the 14th hour so it's good to know that you're truly stable.
    See also below for optimizing your ram settings.
    Method #2: Quick and dirty method for 4ghz aka screw efficiency
    Set your ioh and ich to 1.2, your vdimm to 1.65, your cpu pll to 1.88, and your QPI/uncore to 1.35.
    For D0 users set your vcore to 1.275 and for C0/C1 users set your vcore to 1.4 and BCLK to 190/191 or 210/211 and multiplier to 21 and 19 respectively. Check for Prime stability. D0's should be fine, but C0/C1 still may not make it, at this point your temps may be too high if you're not on water, so I suggest you start working backward in order to hit a much lower vcore or use method 3.
    Method #3: Quick and dirty vcore boosting.
    Set your ioh and ich to 1.2, your vdimm to 1.65, your cpu pll to 1.88, and your QPI/uncore to 1.35. Set BCLK to 190/191 or 210/211 and multiplier to 21 and 19 respectively.
    The D0 chip usually hits 4.0 in the vcore range of 1.175 and 1.25. Try those voltages until you find whats right for your chip.
    The C0/C1 is a much more difficult beast with a much larger range of 1.27 to around 1.4 and up to 1.5 (Do not attempt on air unless you live somewhere really, really cold). Some may not hit 4ghz at all.
    This method is more difficult as some chips may not boot until you give them the proper vcore
    How to use Prime95 to test stability:
    Open up Prime95 and Realtemp to check your idles and loads. Set Prime95 to whatever priority you'd like. I prefer 4 or 7 so that realtemp still updates but some people prefer 10 and will run without a temperature monitor. Either is fine, but I'm always paranoid that my cooler will somehow become unlatched spontaneously. Set windows not to restart on bluescreen by setting [insert settings here] so that you can catch the error (although windows will record it somewhere). Start a mixed torture test and let it run for however long, depending on if you're only doing a temporary stability test in order to raise (about 1 hour) or a true stability test (16-24 hours). Once you've passed Prime95 you can run any other stability test that you want.
    Prime 95 Errors:
    Freeze: Increase the vcore
    Other errors can indicate instability with the chip if they are during small fft (increase vcore by .125) or instability with ram large ftt (Try raising the ioh and/or running memtest).
    BSOD code 101: Increase the vcore. I recommend increasing by +.025 if you get a bsod
    BSOD code 124: Increasese or decrease the QPI/uncore by .25. Depending on where you are in your stability tests you'll probably need to increase it. 1.375 is the max I'm comfortable with although people say 1.4+ is safe. This is for you to determine and research. Don't do anything you're not comfortable with. Intel says do not go above 1.35 so 1.375 with droop and loss is safe and not too far outside specification.
    It is important to note that sometimes QPI can be too high and that might cause this code. That's why it's not a good idea to just set things to 1.35 and hope for the best. If you find that increasing QPI/uncore voltage is not increasing stability, try decreasing it. Just remember of course, to keep track of your settings. I recommend not increasing, unless you have to (Don't be arbitrary about it).
    D0 exclusive BSOD weird 2 letter/number codes: Treat this as a 101 and increase vcore by +.025. Update: It seems that these error codes can crop up for other reasons. Depending on where you are in the process you should take a look at your other voltages. I realize this is vague, but you may need to experiment.
    If any worker fails, especially during small fft then it's cpu voltage. Bump it once or twice. If it fails during large fft then its probably memory error you can try running memtest/upping ioh. I would try running small fft at that point for a good amount of time and make sure its not the cpu voltage. If it passes 8-12 hours of small fft then work on making it pass large fft. Just remember to keep track of your settings. That's not to say that a large fft error won't be the result of cpu voltage, it's just not what I would try. Be methodical. If something allows Prime to run significantly longer then keep it. Significant depends where you are in the process. If your workers fail as soon as you start and a setting change gets you through a test then I'd say its good. If you get crashes during the 8th hour, and the setting change only gets you another 5 minutes in the 8th hour, it's probably just random and not the setting.
    Testing Memory Stability with memtest 86+:
    Personally, I do not run memtest until I actually encounter what could be memory errors( I assume things work until proven otherwise). Begin by setting your ram timings in the bios and setting your QPI/uncore to 1.35 and your vdimm to 1.64-1.66. Do not oc your cpu. Just run your ram at its rated spec to make sure that the ram is stable and not defective. You can also check it again with an oc'ed cpu as well. If it's unstable try raising the ioh to 1.20 or higher. If you are still getting errors try each dimm one at a time and see if you need to RMA (A pain in the *** but necessary).
    Optimizing ram with memtest86+:
    Assuming your ram is stable you can either overclock, lower voltage, tighten timings, or all of the above.
    1. Lowering voltage. Run memtest86 for 20 minutes, if you get errors, stay where you are. Otherwise lower the vdimm by .02 and repeat until you get an error within 20 minutes. Then run it overnight.
    2. Overclocking. You may be able to run your ram faster than you thought. Loosen the timings(make them higher) and then increase BCLK. You can optimize your voltage with the above number one. Depending on the ram, you may be able to overclock quite a bit or not at all. Running your ram at anything above 1066 is in fact overclocking the IMC.
    3. Tightening timings. Timings should be decreased as such. Assuming you begin with 9-9-9 your next step should be 9-9-8 then 9-8-8 then 8-8-8. You can also try 8-9-8 but this is going to depend on your memory. You may need to raise voltages to tighten the timings.
    The usefulness of overclocking your ram is limited. See the useful links sections below to see how certain ram settings will impact your real life performance.
    Frequently asked questions:
    Q: I can't raise my BCLK over some number. How do I fix it? What's the deal?
    A: Not all chips and motherboards are made the same. You can try playing around with voltage amplitude, pll, skew or pcie (pcie is probably best not raised as it can cause damage). This is a question that is better asked on a thread dedicated to a specific board. You may end up being out of luck.
    Q: What are safe voltages?
    A: According to Intel or common knowledge the following are the safe air temperatures:
    Vcore: ~1.4
    QPI/uncore (VTT): 1.35
    PLL: 1.88
    Vdimm:~1.65 (Some will say that you are safe within .5 of your QPI/uncore allowing for a max of 1.85 on vdimm. See the link to the xtreme systems forum below on this subject for a long thread).
    IOH: Less than 1.3
    ICH: Less than 1.3
    Q: My chip is too hot before I can reach 4 ghz. What can I do?
    A: Disable hyperthreading or buy a better cooler (Noctua, TRUE or Megahalems recommended).
    Q: But don't I want hyperthreading?
    A: It's certainly nice to have a feature you paid for, but it sometimes decreases performance and it definitely causes a lot of heat. It's up to you.
    Q: How do I go past 4ghz?
    A: Same way as you got there in the first place. Just keep increasing BCLK. Past this point though it's up to you to do some research on your own.
    Q: What is this multiplier throttling I've heard about?
    A: Some boards will throttle down the 21x multiplier if the wattage becomes too high. The culprits without public fixes are the Asus P6T Deluxe and vanilla (The Deluxe v1 has a bios available on the xtremesystems forum which can be crossflashed onto the v2 which will fix this problem) It really only becomes a problem at high voltages with high frequencies. Other boards have ways of disabling it.
    Q: Why would I want to optimize my voltages?
    A: Save money on power bills and leave more wattage for other devices.
    Q: My chip was stable for X amount of time and now it's not?
    A: Have you added any hardware? How are your temperatures? High voltages and high temps can cause decay and make the chip require more voltage for an overclock. It may also be that your PSU is starting to go or maybe your motherboard is. Do your best to troubleshoot this.
    Q: My temperatures seem really high? Is X degrees ok?
    A: A better question is whether or not you are ok with X degrees. How long do you plan to won this chip? What are your ambients? If your house is 40 degrees centigrade, don't expect your chip to drop below that unless you are using extreme cooling (also try to move somewhere cooler cause that's really hot or get some AC, are you trying to cook yourself?). A cpu well taken care of can last over a decade when run within spec. How long do you really think you're going to keep this chip? A rule of thumb I go by is never push a part that I can't afford to replace if I break it (I do this anyway, but its a good rule nonetheless). Your temps will always get higher than normal when stress testing so do some normal stuff to see if your temperatures are acceptable. Try backing down a bit if you are unhappy.
    Q: I heard this will work or this needs to be this way?
    A: Try it. This is a general guide, not a set of hard and fast rules.
    Q: My computer restarted while priming; how do I find out the error?
    A: If you haven't already, disable bsod restarts in windows. Sometimes, though, it decides to restart anyway.
    Open Computer Management by right-clicking the Computer icon on the start menu (or on the Desktop if you have it enabled) and select Manage. Navigate to the Event Viewer. Note: If you did not disable UAC then you will be prompted to consent to the action you're about to perform. Click Continue. Note: You can also open the Event Viewer by typing Event Viewer in the Search box and pressing Enter, or typing eventvwr.msc in the Run command.
    Also check the results.txt in your Prime95 folder for a log of when it ultimately crashed and what it was doing at the time.
    Q: Whats the deal with PCIE frequency? Can it help break my BCLK wall?
    A: Yes, but I advise caution. Raising this too much can damage things running on the pcie bus or cause them to not work. I would not raise it personally more than a few mhz. You are probably safe at 103, but I take no responsibility of course.
    Voltages/settings you can try to use to increase stability:
    PLL: 1.88
    IOH: 1.2+
    ICH: 1.2
    CPU voltage amplitude: +800mv
    CPU Skew: +300ps
    Command rate: change from 1n to 2n
    You should really check in on your specific board as not all boards have the same settings. Be methodical in testing settings since you want to know whether something helped or hurt by itself before you combine.
    Useful Links:
    http://www.overclock.net/intel-cpus/538439-guide-overclocking-core-i7-920-4-a.html
    Intel Info on the i7
    QPI/Uncore voltage (XS) (Do not take this as gospel try to stay in spec unless you feel like really pushing things)
    Info on multiplier throttling (XS)
    Memory Scaling on the Core I7

    My i7 rig is with a socket 1156 board, an Asus P7P55D mobo, and an 860 CPU. I know the Corsair DDR3 memory @ its stock 1.65v simply doesn't run at 1600mhz like it says on its box - 1333mhz seems to be its stability wall.
    I upgraded my Q6600 and Asus P5B deluxe rig because so many people said to never consider overclocking on an editing rig. Was that over-cautious advice?

  • Windows brutally slow on my iMac (Bootcamp)

    Hey guys,
    first of all I would like to say sry, if my english isn't propper enough and lacks sometimes. I'm from germany...but anyway, here's my problem. ;-)
    I have an 21,5 inch iMac mid 2011 with an intel i5, 4gb memory, AMD Radeon HD 6750 512 mb and a 500 GB Harddrive ( NOT SSD!! ).
    All in all my iMac is working well with Mavericks on it but since last year I'm still trying to get windows work properly on it, but it just doesn't.
    I tried different ways of installing windows on it. Through the normal BootCamp process, through a USB install method and also with a way, to install windows with VMware. It's a bit tricky cause you first start installing windows through the virtual machine, though it gets installed on a partition as a windows partition, just like bootcamp. But no matter what I tried, my windows is just slow, specially on the startup.
    My last way to install it was this: I reinstalled mavericks, comepltley clean install. Updated mavericks, started bootcamp and went through the normal installation process. The bootcamp support software gets downloaded, a partition gets created and then it restarts to boot from CD to install windows then. In this case it is windows 8.1, but i tried it with 8 and also with 7 and it makes no difference. The installation process works well, without any problems. The drivers from the current bootcamp support software mostly gets installed automaitcally when windows starts the first time, if not, is just start the steup exe from within the support software. So far so good.
    Now I finally will come to my problem...:D
    Windows just runs slow like sh**. The boot process until i can log into my account works well, I have for example not the problem with the blinking cursor at the windows boot, like lot of people had. I'm within 23 seconds or so at the login window but then it's just horrible. When I type in my password it takes like 12 seconds to get me to the desktop and once Im on it, it takes 20-30 seconds more to get windows running so that I can open an internet browser. For example Skype, which I have in my autostart, takes at least 20 seconds to open and that's just not normal. I tried a lot, believe me....I tried disabling all the autostart programs, though I dont wanna disable them in general, cause I need a few in the autostart, but it didnt make a difference anyway. Even when I enable the automatic login that I dont have to type in my password, it makes no difference. Windows takes just years to get ready once Im on the desktop.
    And again, all the drivers are up to date, I installed them from the newest bootcamp support software and even checked manually if updates are avaible.
    To me it just seems that something is going wrong with the driver load at the beginning of windows. My hard drive istn broken as well, cause mavericks is running without any problems and also i checked the drive with many tools for problems. Yes, I defragmanted my drive under windows and I actually did everything you find on the interent. But still, it just makes no difference. I know that windows is propably not so fast at the start up but what I see isnt normal. I saw many macs on youtube with bootcamp windows on its and windows was running completley normal on it.
    I mean, its not normal that it takes me up to 1 minute from the moment i type in my password, to get a browser open and google the internet. Oh and before I forget it, when I have a anti virus software installed and takes even longer...when i disable all anti virus malware else what programs, it gets a bit quicker, but i guess the problem sitll exist. Also I dont log into my windows with an internet microsoft account, its an offline sign in. Just saying that cause a lot of people on the internet say that the internet login can be slow someitmes.
    So I have no more ideas what to do but I'm pretty sure there is a problem, it's not normal that it takes that long. I recently took a look into some boot log file on windows, dont know exactly what it was but there were many startup items which were causing problems and a slow startup proces. For example the "windows driver module" with the error code 101 took 9 seconds to load. But I have no clue about that boot analyze stuff, so I cant say more about that.
    EDIT: One important note I should make, is, that after it takes that long to work properly, it runs pretty fast and nromal then. Its not that slow the whole time! It's just the start proces or better the login process, what I am talking about. Once the "years" are over whene I log into windows, it runs well then. Thats why I think something with the drivers isnt working properly. Also, in the moment when it takes that long, my hard drive is 100% in use when i look into the task manager...
    I hope someone of you can help me and I'm looking forward to hopefully hear from you!!
    again: sry for my english.
    Cheers!
    Max

    Well...I have already checked msconfig and the automatic startup items. I have looked for all the non-microsoft things and disabled them, to see if it makes a difference. But it makes no difference. Disabling microsoft things in the msconfig isn't really what I wanna do, cause I have no clue about these system files.
    I have also checked a boot analyze section to see if, and what causes trouble at the start. There were a couple of things which slowed down my start process. One thing that seemed to causes a lot trouble was a file called "windows driver installer module" or something like that. But its a system file, I cant simply delete it or something.
    And before you say now: check for the newest drivers...I have the up to date drivers from the bootcamp support software and also checked manually for maybe an update. But it is as up to date as it gets. If it isn't a "bootcamp" issue, what is it then? I would agree with you that it isn't a bootcmap issue, cause bootcamp pretty much does nothing except downloading the support software and making a useless fat32 partition to boot off from...well if you have the usb install optoin, bootcamp does a bit more for you. But anyway... Whatever the problem is, it can't be solved be reinstalling windows or something like that. I reinstalled it many times, windows 7, 8 or 8.1. I fromated the whole system with mavericks to start it over then again, but there are still these problems. 14 seconds waiting when I type in my password, 30-40 seconds more once im on the desktop, until I can open a browser. The strange thing is, after that time, everything works well and windows is running fast..
    You said, that almost have the same imac as me. So how exactly did you install windows? Was it like: You started bootcamp downloaded the support software on a usb drive, made a partition and booted off from an install ddvd to install windows?
    Cause thats what I did, which is exactly the way it should be....Did you install windows only on a partition on your main hard drive or on a second hard drive?

  • Realtek ethernet initialization slow [SOLVED]

    Hello!
    I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
    I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
    DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)
    Here is my netcfg profile:
    CONNECTION='ethernet'
    DESCRIPTION='Ethernet connection at home'
    INTERFACE='eth0'
    IP='dhcp'
    ## for DHCPv6
    #IP6='dhcp'
    ## for IPv6 autoconfiguration
    #IP6='stateless
    This is the output from lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
    02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    This is the output from dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    [ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D7FFF write-protect
    [ 0.000000] D8000-DBFFF uncachable
    [ 0.000000] DC000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
    [ 0.000000] 0000000000 - 00bfe00000 page 2M
    [ 0.000000] 00bfe00000 - 00bfed0000 page 4k
    [ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
    [ 0.000000] RAMDISK: 37dca000 - 37ff0000
    [ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
    [ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
    [ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
    [ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
    [ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
    [ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
    [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bfed0
    [ 0.000000] On node 0 totalpages: 786015
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10692 pages used for memmap
    [ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1828.793 MHz processor.
    [ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003483] Security Framework initialized
    [ 0.003491] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011485] Mount-cache hash table entries: 256
    [ 0.012020] Initializing cgroup subsys cpuacct
    [ 0.012063] Initializing cgroup subsys memory
    [ 0.012087] Initializing cgroup subsys devices
    [ 0.012090] Initializing cgroup subsys freezer
    [ 0.012092] Initializing cgroup subsys net_cls
    [ 0.012095] Initializing cgroup subsys blkio
    [ 0.012163] CPU: Physical Processor ID: 0
    [ 0.012165] CPU: Processor Core ID: 0
    [ 0.012168] mce: CPU supports 6 MCE banks
    [ 0.012178] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012185] using mwait in idle threads.
    [ 0.013589] ACPI: Core revision 20110413
    [ 0.020015] ftrace: allocating 16144 entries in 64 pages
    [ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
    [ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.059996] PEBS disabled due to CPU errata.
    [ 0.059996] ... version: 2
    [ 0.059996] ... bit width: 40
    [ 0.059996] ... generic registers: 2
    [ 0.059996] ... value mask: 000000ffffffffff
    [ 0.059996] ... max period: 000000007fffffff
    [ 0.059996] ... fixed-purpose events: 3
    [ 0.059996] ... event mask: 0000000700000003
    [ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.103342] Booting Node 0, Processors #1 Ok.
    [ 0.103346] smpboot cpu 1: start_ip = 9a000
    [ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206659] Brought up 2 CPUs
    [ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
    [ 0.207867] devtmpfs: initialized
    [ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
    [ 0.210342] print_constraints: dummy:
    [ 0.210439] NET: Registered protocol family 16
    [ 0.210574] ACPI: bus type pci registered
    [ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.251674] PCI: Using configuration type 1 for base access
    [ 0.252194] bio: create slab <bio-0> at 0
    [ 0.254077] ACPI: EC: Look up EC in DSDT
    [ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
    [ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
    [ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258077] ACPI: Dynamic OEM Table Load:
    [ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258557] ACPI: Dynamic OEM Table Load:
    [ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
    [ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259142] ACPI: Dynamic OEM Table Load:
    [ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259584] ACPI: Dynamic OEM Table Load:
    [ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
    [ 0.259886] ACPI: Interpreter enabled
    [ 0.259890] ACPI: (supports S0 S3 S4 S5)
    [ 0.259911] ACPI: Using IOAPIC for interrupt routing
    [ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.267597] ACPI: No dock devices found.
    [ 0.267599] HEST: Table not found.
    [ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
    [ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
    [ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
    [ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.268730] pci 0000:00:01.0: PME# disabled
    [ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    [ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    [ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    [ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.269161] pci 0000:00:1a.7: PME# disabled
    [ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    [ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.269317] pci 0000:00:1b.0: PME# disabled
    [ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.269450] pci 0000:00:1c.0: PME# disabled
    [ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.269585] pci 0000:00:1c.1: PME# disabled
    [ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.269726] pci 0000:00:1c.5: PME# disabled
    [ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    [ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    [ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    [ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    [ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.270263] pci 0000:00:1d.7: PME# disabled
    [ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    [ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
    [ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    [ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    [ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    [ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    [ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    [ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    [ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.270847] pci 0000:00:1f.2: PME# disabled
    [ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
    [ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
    [ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
    [ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    [ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
    [ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
    [ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.271808] pci 0000:02:00.0: PME# disabled
    [ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
    [ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
    [ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.272315] pci 0000:08:00.0: supports D1 D2
    [ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.272325] pci 0000:08:00.0: PME# disabled
    [ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
    [ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
    [ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
    [ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
    [ 0.272587] pci 0000:09:09.0: supports D1 D2
    [ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272595] pci 0000:09:09.0: PME# disabled
    [ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
    [ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
    [ 0.272735] pci 0000:09:09.1: supports D1 D2
    [ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272744] pci 0000:09:09.1: PME# disabled
    [ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
    [ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
    [ 0.272884] pci 0000:09:09.2: supports D1 D2
    [ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.272892] pci 0000:09:09.2: PME# disabled
    [ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
    [ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
    [ 0.273031] pci 0000:09:09.3: supports D1 D2
    [ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.273039] pci 0000:09:09.3: PME# disabled
    [ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
    [ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    [ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.278894] vgaarb: loaded
    [ 0.278896] vgaarb: bridge control possible 0000:01:00.0
    [ 0.279005] PCI: Using ACPI for IRQ routing
    [ 0.291398] PCI: pci_cache_line_size set to 64 bytes
    [ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
    [ 0.291700] NetLabel: Initializing
    [ 0.291703] NetLabel: domain hash size = 128
    [ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.291722] NetLabel: unlabeled traffic allowed by default
    [ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.303337] Switching to clocksource hpet
    [ 0.306534] Switched to NOHz mode on CPU #0
    [ 0.306616] Switched to NOHz mode on CPU #1
    [ 0.311449] pnp: PnP ACPI init
    [ 0.311470] ACPI: bus type pnp registered
    [ 0.312253] pnp 00:00: [bus 00-ff]
    [ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.312836] pnp 00:02: [io 0x0000-0x001f]
    [ 0.312838] pnp 00:02: [io 0x0081-0x0091]
    [ 0.312841] pnp 00:02: [io 0x0093-0x009f]
    [ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.312845] pnp 00:02: [dma 4]
    [ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.313126] pnp 00:05: [io 0x00f0]
    [ 0.313138] pnp 00:05: [irq 13]
    [ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.313201] pnp 00:06: [io 0x002e-0x002f]
    [ 0.313203] pnp 00:06: [io 0x004e-0x004f]
    [ 0.313205] pnp 00:06: [io 0x0061]
    [ 0.313208] pnp 00:06: [io 0x0063]
    [ 0.313210] pnp 00:06: [io 0x0065]
    [ 0.313212] pnp 00:06: [io 0x0067]
    [ 0.313214] pnp 00:06: [io 0x0080]
    [ 0.313216] pnp 00:06: [io 0x0092]
    [ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
    [ 0.313220] pnp 00:06: [io 0x0380-0x0383]
    [ 0.313222] pnp 00:06: [io 0x0680-0x069f]
    [ 0.313224] pnp 00:06: [io 0x0800-0x080f]
    [ 0.313226] pnp 00:06: [io 0x1000-0x107f]
    [ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
    [ 0.313231] pnp 00:06: [io 0x1640-0x164f]
    [ 0.313233] pnp 00:06: [io 0xfe00]
    [ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
    [ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
    [ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
    [ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
    [ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
    [ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
    [ 0.313357] system 00:06: [io 0xfe00] has been reserved
    [ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
    [ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
    [ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
    [ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
    [ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.313478] pnp 00:08: [io 0x0070-0x0077]
    [ 0.313485] pnp 00:08: [irq 8]
    [ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.313607] pnp 00:09: [io 0x0060]
    [ 0.313609] pnp 00:09: [io 0x0064]
    [ 0.313615] pnp 00:09: [irq 1]
    [ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.313688] pnp 00:0a: [irq 12]
    [ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.313774] pnp: PnP ACPI: found 11 devices
    [ 0.313776] ACPI: ACPI bus type pnp unregistered
    [ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
    [ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
    [ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
    [ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    [ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
    [ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
    [ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
    [ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
    [ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
    [ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
    [ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
    [ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    [ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
    [ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    [ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
    [ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
    [ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    [ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.320596] pci 0000:00:01.0: setting latency timer to 64
    [ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    [ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
    [ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
    [ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
    [ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
    [ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
    [ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
    [ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
    [ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
    [ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
    [ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
    [ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
    [ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
    [ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
    [ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
    [ 0.320830] NET: Registered protocol family 2
    [ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.329690] TCP reno registered
    [ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.330176] NET: Registered protocol family 1
    [ 0.330392] pci 0000:01:00.0: Boot video device
    [ 0.330419] PCI: CLS 64 bytes, default 64
    [ 0.330488] Unpacking initramfs...
    [ 0.369353] Freeing initrd memory: 2200k freed
    [ 0.370476] Simple Boot Flag at 0x35 set to 0x1
    [ 0.370972] audit: initializing netlink socket (disabled)
    [ 0.370988] type=2000 audit(1320586961.369:1): initialized
    [ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.401147] VFS: Disk quotas dquot_6.5.2
    [ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.401521] msgmni has been set to 6037
    [ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.401833] io scheduler noop registered
    [ 0.401836] io scheduler deadline registered
    [ 0.401898] io scheduler cfq registered (default)
    [ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.402686] intel_idle: MWAIT substates: 0x22220
    [ 0.402689] intel_idle: does not run on family 6 model 15
    [ 0.402694] ERST: Table is not found!
    [ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.603627] Linux agpgart interface v0.103
    [ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.625141] mousedev: PS/2 mouse device common for all mice
    [ 0.627290] rtc_cmos 00:08: RTC can wake from S4
    [ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.627461] cpuidle: using governor ladder
    [ 0.627463] cpuidle: using governor menu
    [ 0.627728] TCP cubic registered
    [ 0.627731] NET: Registered protocol family 17
    [ 0.627740] Registering the dns_resolver key type
    [ 0.627861] PM: Hibernation image not present or could not be loaded.
    [ 0.627867] registered taskstats version 1
    [ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
    [ 0.637554] Initializing network drop monitor service
    [ 0.639163] Freeing unused kernel memory: 712k freed
    [ 0.639370] Write protecting the kernel read-only data: 6144k
    [ 0.639542] Freeing unused kernel memory: 12k freed
    [ 0.642762] Freeing unused kernel memory: 776k freed
    [ 0.652005] udevd[37]: starting version 174
    [ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.712421] usbcore: registered new interface driver usbfs
    [ 0.712452] usbcore: registered new interface driver hub
    [ 0.712861] usbcore: registered new device driver usb
    [ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    [ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.733616] hub 1-0:1.0: USB hub found
    [ 0.733621] hub 1-0:1.0: 4 ports detected
    [ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    [ 0.756276] SCSI subsystem initialized
    [ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.763606] hub 2-0:1.0: USB hub found
    [ 0.763612] hub 2-0:1.0: 6 ports detected
    [ 0.766819] libata version 3.00 loaded.
    [ 0.768867] ahci 0000:00:1f.2: version 3.0
    [ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    [ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    [ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.769769] scsi0 : ahci
    [ 0.770124] scsi1 : ahci
    [ 0.770204] scsi2 : ahci
    [ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
    [ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
    [ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
    [ 0.780764] ata_piix 0000:00:1f.1: version 2.13
    [ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 0.781218] scsi3 : ata_piix
    [ 0.781306] scsi4 : ata_piix
    [ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    [ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    [ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    [ 0.857662] hub 3-0:1.0: USB hub found
    [ 0.857667] hub 3-0:1.0: 2 ports detected
    [ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    [ 0.857993] hub 4-0:1.0: USB hub found
    [ 0.857998] hub 4-0:1.0: 2 ports detected
    [ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    [ 0.858306] hub 5-0:1.0: USB hub found
    [ 0.858311] hub 5-0:1.0: 2 ports detected
    [ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    [ 0.858621] hub 6-0:1.0: USB hub found
    [ 0.858625] hub 6-0:1.0: 2 ports detected
    [ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    [ 0.858914] hub 7-0:1.0: USB hub found
    [ 0.858919] hub 7-0:1.0: 2 ports detected
    [ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
    [ 0.963614] ata4.00: configured for MWDMA2
    [ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
    [ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
    [ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
    [ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.091933] ata1.00: configured for UDMA/100
    [ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.092044] ata3.00: configured for UDMA/100
    [ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
    [ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
    [ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
    [ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 1.127901] sdb: sdb1
    [ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.135068] sda: sda1 sda2 sda3
    [ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
    [ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
    [ 1.373358] Switching to clocksource tsc
    [ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
    [ 3.620978] udevd[241]: starting version 174
    [ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 3.860538] ACPI: Power Button [PWRB]
    [ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 3.860983] ACPI: Sleep Button [SLPB]
    [ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
    [ 3.863014] ACPI: Lid Switch [LID]
    [ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
    [ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 3.865301] ACPI: Power Button [PWRF]
    [ 3.954841] ACPI: acpi_idle registered with cpuidle
    [ 3.958941] Monitor-Mwait will be used to enter C-1 state
    [ 3.959002] Monitor-Mwait will be used to enter C-2 state
    [ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
    [ 3.959341] Monitor-Mwait will be used to enter C-3 state
    [ 3.959379] Marking TSC unstable due to TSC halts in idle
    [ 3.960679] Switching to clocksource hpet
    [ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
    [ 3.964908] acpi device:05: registered as cooling_device1
    [ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
    [ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 3.979831] r592: driver successfully loaded
    [ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.114730] iTCO_vendor_support: vendor-support=0
    [ 4.188196] wmi: Mapper loaded
    [ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 4.327775] sdhci: Secure Digital Host Controller Interface driver
    [ 4.327778] sdhci: Copyright(c) Pierre Ossman
    [ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
    [ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
    [ 4.340202] Registered led device: mmc0::
    [ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
    [ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 4.348208] [drm] Initialized drm 1.1.0 20060810
    [ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
    [ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
    [ 4.374333] usbcore: registered new interface driver usbhid
    [ 4.374336] usbhid: USB HID core driver
    [ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
    [ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
    [ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
    [ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 4.420843] Initializing USB Mass Storage driver...
    [ 4.420973] scsi5 : usb-storage 2-2:1.0
    [ 4.421105] usbcore: registered new interface driver usb-storage
    [ 4.421107] USB Mass Storage support registered.
    [ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
    [ 4.438830] Linux media interface: v0.10
    [ 4.439547] usbcore: registered new interface driver uas
    [ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
    [ 4.472037] Linux video capture interface: v2.00
    [ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
    [ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
    [ 4.492141] usbcore: registered new interface driver uvcvideo
    [ 4.492144] USB Video Class driver (v1.1.0)
    [ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
    [ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
    [ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
    [ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
    [ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 4.663396] r852: Non dma capable device detected, dma disabled
    [ 4.663425] r852: driver loaded successfully
    [ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
    [ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
    [ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
    [ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
    [ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
    [ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
    [ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
    [ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
    [ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
    [ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
    [ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
    [ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
    [ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
    [ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
    [ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
    [ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
    [ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
    [ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
    [ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
    [ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
    [ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
    [ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
    [ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
    [ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
    [ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
    [ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
    [ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
    [ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
    [ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
    [ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
    [ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
    [ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
    [ 4.810125] [TTM] Initializing pool allocator.
    [ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
    [ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
    [ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
    [ 4.845721] Registered led device: phy0-led
    [ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
    [ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
    [ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
    [ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 4.885059] [drm] No driver support for vblank timestamp query.
    [ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
    [ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
    [ 5.102069] fbcon: nouveaufb (fb0) is primary device
    [ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
    [ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
    [ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
    [ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
    [ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.430063] sdc: sdc1
    [ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
    [ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
    [ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
    [ 6.160954] Console: switching to colour frame buffer device 180x56
    [ 6.163432] fb0: nouveaufb frame buffer device
    [ 6.163434] drm: registered panic notifier
    [ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
    [ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
    [ 9.143563] r8169 0000:08:00.0: eth0: link down
    [ 9.143572] r8169 0000:08:00.0: eth0: link down
    [ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
    [ 13.659460] NET: Registered protocol family 10
    [ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.816958] FS-Cache: Loaded
    [ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
    [ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
    [ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
    [ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
    [ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 16.372460] wlan0: authenticated
    [ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 16.386885] wlan0: associated
    [ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.491123] Intel AES-NI instructions are not detected.
    [ 16.677727] padlock_aes: VIA PadLock not detected.
    [ 27.296946] wlan0: no IPv6 routers present
    [ 50.863694] r8169 0000:08:00.0: eth0: link up
    [ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
    [ 61.110061] eth0: no IPv6 routers present
    [ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
    [ 356.840075] cfg80211: Calling CRDA for country: DE
    [ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
    [ 360.658086] wlan0: authenticated
    [ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
    [ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
    [ 360.670550] wlan0: associated
    The slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
    Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
    Is there anything I can do to make my ethernet card initialize faster?
    If you need any more information, please ask.
    Last edited by rtoijala (2011-11-07 14:32:27)

    Strike0 wrote:... but dont you need some sort of dhcp client/or daemon for that as well?
    Try adding dhcpd to your rc.conf array.
    Netcfg seems to automatically start dhcpcd (I can see it htop).
    Strike0 wrote:Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
    This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
    Strike0 wrote:what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
    Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
    ratcheer wrote:What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
    My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
    Thanks.
    EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
    Last edited by rtoijala (2011-11-07 14:32:47)

  • Error while connecting to DB, when checking installation type of NW04S-Inst

    Hi,
    i installed a new netweaver 04s - system on sles10sp2 as distributed system.
    SCS is ok, Database DB6 installation is also successfull.
    Now i install the central instance, but when sapinst checks the installation type (i select nothing), the installation failed with:
    Execution of the command "/usr/lib64/jvm/java/bin/java -classpath /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib/launcher.jar -showversion com.sap.engine.offline.OfflineToolStart com.sap.inst.jsourcecheck.JSourceCheck /tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib/iaik_jce.jar:/mnt/sapcd/NW04S_SR2n/BS_2005_SR2_SAP_Installation_Master/IM_LINUX_X86_64/COMMON/INSTALL/jsourcecheck.jar:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/lib:/tmp/sapinst_instdir/NW04S/SYSTEM/DB6/DISTRIBUTED/AS/CI/install/sharedlib:/home_sap/db2i33/sqllib/java/db2jcc.jar:/home_sap/db2i33/sqllib/java/db2jcc_license_cu.jar -systemName I33 -ssPropFile /usr/sap/I33/SYS/global/security/data/SecStore.properties -ssKeyFile /usr/sap/I33/SYS/global/security/data/SecStore.key -trace all" finished with return code 101. Output:
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
    IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142-20080130 (JIT enabled)
    J9VM - 20071205_1933_LHdSMr
    JIT  - r7_level20071016_1845)
    PerfTimes : loadNativeLayer: loading jperflib failed. jperflib (Not found in java.library.path)
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Caused by: com.ibm.db2.jcc.b.SqlException: [ibm][db2][jcc][t4][2013][11249] Connection authorization failure occurred.  Reason: User ID or Password invalid.
            at com.ibm.db2.jcc.c.b.i(b.java:2002)
            at com.ibm.db2.jcc.c.b.c(b.java:1657)
            at com.ibm.db2.jcc.c.bb.r(bb.java:792)
    I see the reason, but i don't know which user is mean ?
    Can anyone help me ?
    Best Regards,
    Tom

    This issue (and solution) is described in ML Doc 577905.1 (Error While Connecting To Database Via Workflow Builder)
    HTH
    Srini

  • Mountain Lion download problems with Lion 10.7.5 (no VirusBarrier issue)

    I have a mid-2009 Macbook Pro. From the factory it came with Snow Leopard but has since been upgraded to Lion OS X 10.7.5. I do not have VirusBarrier, I am writing from a recently clean-installed Lion.
    I have now been troubleshooting my Mac for several days. When I wrote first, I had an issue with Safari having been damaged and so I wasn't able to reinstall Lion - but after a certain extremely helpful community member I finally succeeded in installing Lion.
    But the issues with the App Store still persist. All my Mountain Lion downloads fail, getting the error message "can't verify, might be corrupted" what many here have also been getting. However, most solutions were related to VirusBarrier (which I don't have), or /var/folders errors (Console does not show any var-related errors).
    So if it's not a var-related issue, or related to firewalls or virus softwares (I have disabled the Firewall and I have no virus software installed), what could it be?
    When the download and install of ML failed last time, Console showed the following messages:
    11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
    11/30/12 11:54:44.617 AM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [235] for authorization created by '/System/Library/CoreServices/Software Update.app' [567]
    11/30/12 12:25:49.252 PM authexec: executing /Applications/Install OS X Mountain Lion.app/Contents/Resources/InstallAssistantTool
    11/30/12 12:26:17.178 PM Install OS X Mountain Lion: Stopped operation queue with Error Domain=IAErrorDomain Code=101 "This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading." UserInfo=0x7f93aad17ee0 {IAErrorAlternateAction=App Store, NSLocalizedRecoveryOptions=(
        Cancel,
        "App Store\U2026"
    ), NSLocalizedRecoverySuggestion=Delete this copy of the application, and go to the Purchases page of the Mac App Store to download a new copy., NSRecoveryAttempter=<IARecoveryAttempter: 0x7f93aab1e1d0>, NSLocalizedDescription=This copy of the Install OS X Mountain Lion application can't be verified. It may have been corrupted or tampered with during downloading.}
    ...and a bit later, upon re-starting the download:
    11/30/12 12:29:40.515 PM com.apple.SecurityServer: Failed to authorize right 'system.install.apple-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
    11/30/12 12:29:40.547 PM com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [817] for authorization created by '/Applications/App Store.app' [781]
    Problem elimination:
    * I don't think this is a router-related issue: I have downloaded and installed other softwares outside App Store successfully
    * As said, I don't think this has anything to do with Firewall or Virus settings
    * Nor has this anything to do with /var/folders as far as I can tell
    What I've tried so far:
    * Repaired disk permissions several times
    * Rebooted
    * Restarted App Store
    * Following one advise found on the net, I deleted preflight.pfpkg just in case
    * All the time I have made sure my OS has the most recent Software Updates installed (most of them downloaded successfully, while with Safari and OS 10.7.5. I had to try several times before they were downloaded succesfully)
    I just reinstalled my OS X Lion, only to use it to jump on to Mountain Lion - so I am pending my migration until ML is installed. I would like to fix this soon, since I'd like to get the migration done and my real work started. I would really appreciate your help.
    I'm not very adept at using Console or Terminal to troubleshoot, so if someone could guide me through the problem identification, that would be great. Unless someone already knows exactly what's going wrong and can show me a working solution - that'd save my day!
    Thanks!

    In cases like this, if you have an Apple store near by, they will most likely install the OS free of charge for you, if you can't bring your Apple ID along to prove you've paid for it.
    Would that work out for you?

  • Unable to install the security update 2014-002 1.0 on 10.9.2

    I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
    install.log -> search: "error"
    May  2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
    May  2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
    May  2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
    May  2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
                          ErrorCode = 311;
                          ErrorDomain = SUErrorDomain;
                          State = Error;
    May  3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
    May  3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
    May  3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"}

    I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
    install.log -> search: "error"
    May  2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
    May  2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
    May  2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
    May  2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
                          ErrorCode = 311;
                          ErrorDomain = SUErrorDomain;
                          State = Error;
    May  3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
    May  3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
                  NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
    May  3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"}

Maybe you are looking for