Code 19 error on teac dv-w28s-vtf drive!

After trying to boot up a CD, I discovered the CD drive had a code 19 error so after several unsuccessful fixes, I ended up uninstalling the teac dv-w28s-vtf drive... Yet nothing has helped The TEAC website has no fixes and I have tried the windows 7 troubleshooter... I would appreciate a solution! By the way I own a Toshiba Satellite L655-S5096.
Solved!
Go to Solution.

Satellite L655-S5096
Code 19 indicates a problem in the registry. Probably this will fix it.
   Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
-Jerry

Similar Messages

  • Code 41 Error when installing my HID keyboard driver with my HID mouse driver

    I am developing a HID keyboard driver and a HID mouse driver based on HIDUSBFX2 sample code.
    So I added some lines as below into both keyboard driver inf file and mouse driver inf file.
    ;-------------- Service installation
    [hidKeyboard_Device.NT.Services]
    AddService = hidKeyboard,, hidKeyboard_Service_Inst
    AddService = mshidkmdf,0x000001fa, mshidkmdf_Service_Inst
    ; -------------- hidKeyboard driver install sections
    [hidKeyboard_Service_Inst]
    DisplayName    = %hidKeyboard.SVCDESC%
    ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
    StartType      = 3               ; SERVICE_DEMAND_START
    ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %12%\hidKeyboard.sys
    ; -------------- mshidkmdf driver install sections
    [mshidkmdf_Service_Inst]
    DisplayName    = %mshidkmdf.SVCDESC%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %10%\System32\Drivers\mshidkmdf.sys
    LoadOrderGroup = Base
    [hidKeyboard_Parameters.AddReg]
    HKR,,"LowerFilters",0x00010000,"hidKeyboard"
    I installed my HID mouse driver first successfully.
    And then I tried to install my HID keyboard driver. But the installation was failed with error code 41.
    Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
    When I checked mshidkmdf service registry, I can find that Owners value is "oem6.inf, oem5.inf"
    oem6.inf - keyboard driver inf file, oem5.inf - mouse driver inf file
    And when I checked the log with traceview, keyboard driver was not able to receive any IRP from HID class.
    On the other hand, mouse driver received the IRP and reinstalled.
    * If I uninstall the mouse driver and then install it again, the driver is installed successfully. I mean that this issue was found when first installation.
    Please help me~

    if you are filtering below the hid miniport, why do you have separate keyboard and mouse infs? For a filter below the miniport just use one inf and the filter will see both the keyboard and mouse requests (assuming you report a keyboard and mouse TLCs
    in the hid descriptor)
    d -- This posting is provided "AS IS" with no warranties, and confers no rights.

  • Hi their is a code 10 error appears on my network card driver please guide me how i can fix that....

    I have Thinkpad T41 As my network card drive installed after installation the driver the system suddenly shows "This device can not start (code 10 Error) Please guide me how i can fix it

    Hi VanessaLovery,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your notebook works fine on battery, but performs poorly on AC ,after taking it to a repair shop to have it cleaned.
     Here is a document on Troubleshooting an Overheating and Auto Shutdown Issue.
    Have you checked your performance plan to ensure it is set to balanced  Managing Power Options (Windows 7 and Vista).
    Have you tried a different electrical outlet?
    Are you using the AC adapter that came with your notebook?
    On startup if you press the F2 button approximately once every second, you should be able to enter the HP advanced diagnostics window, to test for hardware failures.    Testing for Hardware Failures (Windows 7, Vista).
    If you would like further assistance would you please provide your exact model of DV 6 and the Operating System you are running.  How Do I Find My Model Number or Product Number.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-0

    Hi all,
             I have found a error "Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-01'" while adding the DELIVERY document.
    I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
    Could anyone solve this problem. is there any setting which i am missing..??
    Regards
    Sandesh

    HI Sandesh,
    Check Sap note :1252328
    and also check below thread of similar issue:
    Re: 'Invalid Currency' error when attempting to deliver order
    Hope this will solve your issue.
    Thanks,
    Neetu

  • Error code -22: Error while registering

    Hi Guys.
    I'm new to NW Mobile 7.1.
    I'm able to run developed applications and see data on physical devices (PDAs).
    I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
    My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
    When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
    After a sync, the folowing messages appear on my console:
    Windows XP
    messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
    messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
    messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
    messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
    messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
    I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
    I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
    In just a few words, it is driving me nuts.
    Thank you in advance,
    David.

    Hi,
    if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
    In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
    To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
    If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
    Hope this helps!
    Regards,
    Oliver

  • Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

    Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
    Any ideas?

    Did you already have a look at this article?
    iOS: Device recognized in iTunes for Mac OS X

  • Itouch 3rd gen not recognised in Windows vista but ok in itunes (code 10 error)

    Windows Vista pc running latest itunes. pc will recognise itouch 3rd gen in itunes but not in  explorer. device driver posts a code 10 error. checked for update driver, response in latest driver installed (digital camera). Need help to be able to download photos in itouch.

    Thanks IIIaass, I have checked to see that the Vista pc hase the lastest driver (confirmed latest drivers, incl MTP USB drivers) and tried uninstalling and reinstalling itunes no luck.
    I am having the same problem on another computer running windows 7 - itunes ok but code 10 error as well. I have also tried uninstalling and reinstalling itunes on this pc as well - no luck.
    Any other suggestions?

  • Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

    Hi experts,
    I have a big issue in production server,
    the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
    if i am reprocess or press F6 it is going manually.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31">  </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">&copy; 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Regards,
    Kiran polani

    Dear Sriram Ramani,
    in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
    but my problem is in Soap to RFC case..
    for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
    when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
    not for all signals for few signals for some time..
    Why it is happening i can't understand.
    in repository it is saying Repsitory object hmi failed and address already in use.
    is there any problem with loading IR objects.
    Please suggest me good suggestion for this type of issue what can do for this to resolve.
    Regards,
    Kiran Polani

  • CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

    Hi,
    Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
      <SAP:P1>500</SAP:P1>
      <SAP:P2>Internal Server Error</SAP:P2>
      <SAP:P3>(See attachment HTMLError for details)</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
    request and response were successfull. RWB shows the following message.
    2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
    2009-06-12 09:34:50 Information Message successfully put into the queue.
    2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
    2009-06-12 09:34:50 Information The message status was set to DLNG.
    2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
    2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
    2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
    2009-06-12 09:36:35 Information Database request processed successfully.
    2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
    2009-06-12 09:36:35 Information The message status was set to DLVD.
    I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
    those did not solve my problem.
    Can some one help me to solve this issue.
    Thanks,
    Vijay.

    I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
    Still I am facing same problem.
    Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
    Regards,
    Abhishek.

  • Generic oracle eway code generation error in Java caps 5.1.3

    Hi,
    I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
    com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
         at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
         at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
         at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
         at org.openide.util.Task.run(Task.java:136)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
    Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
         ... 10 more
    Regards,
    Abdul

    hi...
    i too getting same problem..how did u reslove this...
    please help me out...
    thanks in advance
    KK

  • Report App Server;Error code:-2147215349 Error code name:docNotReady.......

    Hi Experts,
    In our application we are trying to connect to the RAS server  for the ad hoc reporting capabilities that allow users to modify reports over the Web.
    In order to do this what are servers need to run on the server side( I am looking for settings on server side like, what are the servers and services to be run on).
    When we try to open the document  we are getting the error. The code and error msg are as follows.
    private void GetReportClientDocument()
              try {
                   sessionManager = CrystalEnterprise.getSessionMgr();
                   enterpriseSession = sessionManager.logon(username,password, servername, "SecEnterprise");
                   iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
                   String sampleReportName = "Test_Open";
                   IInfoObjects infolist = iStore.query("Select SI_CUID From CI_INFOOBJECTS Where  SI_NAME='" + sampleReportName + "' and SI_INSTANCE=0");
                   int lookUpId = 0;
                   for (int i = 0; i < infolist.size(); i++) {
                        IInfoObject siId = (IInfoObject) infolist.get(i);
                        lookUpId = siId.getID();
                   System.out.println("The CUID is: "+lookUpId);
                   IInfoObjects list = iStore.query("select * From CI_INFOOBJECTS Where SI_ID="+lookUpId);
                   IInfoObject report = (IInfoObject) list.get(0);
                   ReportClientDocument rcd = new ReportClientDocument();
                   IReportAppFactory appFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
                   try {
                        System.out.println("Name of Document: "+rcd.getReportDocument().getName());
                        rcd = appFactory.openDocument(report, OpenReportOptions._openAsReadOnly,null);
                   } catch (ReportSDKException e) {
                        e.printStackTrace();
              } catch (SDKException e) {
                   e.printStackTrace();
    Error:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException: The document has not been opened.---- Error code:-2147215349 Error code name:docNotReady
         at com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException.throwReportSDKClientDocException(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDatabaseController(Unknown Source)
         at Viewer.GetReportClientDocument(Viewer.java:98)
         at Viewer.main(Viewer.java:27)
    Thanks in advance for your help.

    Hi Qiang,
    Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
    Thanks,
    Erik

  • The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

    Friends,
                I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
    Any suggestions would be very helpful.
    Thanks in Advance,
    Bharath

    Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
    These errors come for various errors and tracing RAS would give us a better idea.
    It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
    Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
    Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
    Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
    Thanks,
    Prithvi

  • Exit Code 6  error on installation.

    I have installed and reinstalled CS5  a number of times and receive the Exit Code 6 error message. It says I have 0 fatal errors, 21 errors and 1 warning.I am running Windows 7 Ultimate x64 with 4Gb of ram and an Intel core i7 processor . I have tried the following
    Restarting computer in minimized state
    Repaired the Microsoft Windows Installer
    Uninstalled and reinstalled Air
    installed as a trial version
    but no satisfaction. Same messages'
    I have a copy of the log file but this site will not let me post it
    A summary of the summary says
    Warning :1ArkServiceControl ::Start Service:Service not started/stopped Switchboard. Current State:0 Exit Code: 0 Service Specific Exit Code:0
    then there are four Error 31
         four Error 32
         four Error 47
         four Error 48
    then payload errors
    The problem is that once I have had a session on CS5 if I close it down it will not reopen until I restart the computer.
    Are these errors related to this problem.

    I have installed and reinstalled CS5  a number of times and receive the Exit Code 6 error message. It says I have 0 fatal errors, 21 errors and 1 warning.I am running Windows 7 Ultimate x64 with 4Gb of ram and an Intel core i7 processor . I have tried the following
    Restarting computer in minimized state
    Repaired the Microsoft Windows Installer
    Uninstalled and reinstalled Air
    installed as a trial version
    but no satisfaction. Same messages'
    I have a copy of the log file but this site will not let me post it
    A summary of the summary says
    Warning :1ArkServiceControl ::Start Service:Service not started/stopped Switchboard. Current State:0 Exit Code: 0 Service Specific Exit Code:0
    then there are four Error 31
         four Error 32
         four Error 47
         four Error 48
    then payload errors
    The problem is that once I have had a session on CS5 if I close it down it will not reopen until I restart the computer.
    Are these errors related to this problem.

  • VB ActiveX User Control fails to install on Windows 8 using IE10 with Code Download Error: (hr = 80070005) Access is denied.

    I have a VB VS2008 (.Net 2.0) ‘pure’ .NET based user control which used to be hosted in Internet Explorer.
    Because that approach is no longer possible in VS2013 (.Net 4.5) I have converted it to an VB ActiveX user control.
    This process involves digitally signing the user control DLL.
    Creating a setup project resulting in a setup.exe and MyUserControl.msi.
    Digitally signing both those components and then producing a cab file (which again is digitally signed).
    IE10 should then be able to install this using an object tag as follows
    <object id="editor" height="100%" width="100%"
     classid="clsid:EA47DB16-9272-4CB3-A800-C369A479396A" codebase="cab\MyUserControl.cab#Version=6,0,11,1" VIEWASTEXT>
    If I use the setup.exe and MyUserControl.msi directly on the client windows 8 machine before starting IE10 then the control is already installed (shows up in Programs and Features) and it works.
    If I don't do this and let IE install the control then it doesn't work.
    What I see is the IE prompt
    This website wants to install the following add-on: 'MyUserControl.cab'
    Clicking on install produces the User Account Control MsgBox
    Do you want to allow the following program to make changes to this computer
    Clicking yes doesn't install the control as expected
    The inf file that I'm using is currently
    [version]
    signature="$CHICAGO$"
    AdvancedINF=2.0
    [Add.Code]
    setup.exe=setup.exe
    MyUserControlSetup.inf=MyUserControlSetup.inf
    MyUserControlSetup.msi=MyUserControlSetup.msi
    [setup.exe]
    file=thiscab
    [MyUserControlSetup.inf]
    file=thiscab
    [MyUserControlSetup.msi]
    file=thiscab
    [Setup Hooks]
    RunSetup=RunSetup
    [Deployment]
    InstallScope=user
    [RunSetup]
    run="%EXTRACT_DIR%\setup.exe"
    I have defined the registry setting ForceCodeDownloadLog
    Examining the temporary internet files location after trying to install using IE10 I can see the following
    *** Code Download Log entry (15 Jan 2015 @ 11:49:18) ***
    Code Download Error: (hr = 80070005) Access is denied.
    ERR: Run Setup Hook: Failed Error Code:(hr) = 80070005, processing: %EXTRACT_DIR%\setup.exe
    LOG: Reporting Code Download Completion: (hr:80070005 (FAILED), CLASSID: ea47db16...,

    The problem here was the cab file.
    Using ProcessMonitor I found that the following entry was generated at the time of failure
    16:48:00.9222751            2920      IEInstal.exe         CreateFile              
    C:\Users\Jim\AppData\Local\Temp\IDC2.tmp\setup.exe             NAME NOT FOUND               Desired Access: Read Attributes, Read
    Control, Synchronize, Dis, Options: Synchronous IO Non-Alert, Non-Directory File, Disallow Exclusive, Attributes: n/a, ShareMode: None, AllocationSize: n/a
    Analysis of the contents of the cab file using PeaZip indicated that it didn't contain setup.exe which confused me for a while as the makecab /f MyUserControlSetup.ddf produced no errors.
    The MyUserControlSetup.ddf contained
    .Set DiskDirectoryTemplate=cab
    .Set CabinetNameTemplate=DocEditor.cab
    MyUserControlSetup.inf
    MyUserControlSetup.msi
    setup.exe
    Using makecab /f MyUserControlSetup.ddf /v3 I saw that the output was being written to 3 'disk' files but only one was present in explorer after it finished.
    So I guessed that the output was for floppy disks and changed MyUserControlSetup.ddf to contain
    .Set MaxDiskSize=CDROM
    .Set DiskDirectoryTemplate=cab
    .Set CabinetNameTemplate=DocEditor.cab
    MyUserControlSetup.inf
    MyUserControlSetup.msi
    setup.exe
    PeaZip now indicated that the cab file contained the 3 files I expected and using that cab in the codebase attribute installed my ActiveX control

  • I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error.  i am using copy and paste to prevent miss typing the code.

    Hi Lawrence,
    Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
    Regards,
    Rave

Maybe you are looking for