Code 3 Device Error buring Blu-Ray

Hello,
I am having an issue with buring a Blu-Ray. I am getting this error
Blu-ray Error: "device error"' Code: "3" nOTE: "cREATEsTCsEQUENCE: fAIL TO WRITE m2s FILE
Can someone help? This problem has already cost me $10.

http://forums.adobe.com/message/5522091#5522091
Test the workflow up to the point of actually burning a disk by a) building to an image and b) burning with an alternate software such as ImgBurn for PC or Toast for Mac.
I do not think there was a solution for users getting this problem in CS6.

Similar Messages

More errors for blu-ray in cs5

ok. so i keep taking you guys' advice for this project, and i keep advancing a little bit further along in my workflow, but now i have A NEW error. lol. i think i know what the first half of it is, but not sure about the other.... i did a search on this error and found some helpful things... but it still persists.... but this is the error:
"Blu-Ray error: file already exists, code: 6, Note: Video buffer underflows.
Total bitrate is too high near item = 2.869533 seconds - Recommended IG PTS
is 54009000 (in 90 khz)."
after reading on here i found 2 things. first thig i found was that Bill said he had the same problem with a project, and basically what he was saying sounded ALOT like what i was doing. so per his advice i scrapped the whole project, and started over again (imported assets, imported raw menu data from PS files, and went again) error still persists. i also followed some advice Jeff gave on another thread (i can't remember what, now), but that didnt seem to solve the problem either. i think he ALSO mentioned something about the bit-rate spiking during transcode, but i just kept that on back burner... not wanting to transcode it all again, JUST yet.i think Jeff also noted on how Encore only allows up to 6 pages in multi-page (which i did not know) and mine goes up to 8 for main menu, and 16 for pop-up menu. (so i'm guessing i need to break them apart by 5 page menus, each and have the "next" button on the last, link to the first button on the next multi-page menu, would that fix that? defeats the purpose of multi-menu, but for the pop-up its not as important i guess, and teh main menu its only motion with audio, not video so i can choose otehr audio for the subsequent multi-page menus. i'm about to attempt it, anyway)
my question is... what the heck does the second part of the error mean? like, could someone translate that to english? i encoded the thing with AME as a blu-ray compliant mpeg2 (to preserv PrePro chapter stops), high quality variable 1 pass, at 4,5,and 6, mps (its standard definition, from analogue tape, so i don't see the point in going to 35 mbps, lol), with the audio on Dolby ac3. if anyone needs me to give more details on my entire workflow on this project i can, i'm just being general here in case someone already knows exactly what this is, and how to fix it. should i change it to 2 pass? would that maybe catch something and fix it the second time over?
as i said in another thread, i've done MANY dvd's with encore, and never really had any problems at all (but all videos were straight from digital sources, in adobe recognizeable formats), but this blu-ray project (the first i've ever attempted) is KICKING MY BUTT!

Both multi-page normal and popup menus can work quite well in Encore, but it takes a bit of effort to work around the limitations and anomalies. One excellent source for canned menus, tutorials, and advice is John Geddes of www.precomposed.com.
One of the biggest issues with Encore is that much of what it implements is limited by compatibility with the DVD spec, thus limiting what would normally be possible with Blu-ray. Two of the worst of these is the 2-bit depth limitation on button highlights and the limitation of 18 buttons per menu.
Blu-ray has two modes for menus, HDMV or Movie Mode, and BD-J. BD-J menus have a full 32 bit depth, but require at least NetBlender DoStudio to create them.
Movie mode menus (IG streams) are 8-bits deep. In most cases, you won't notice the difference unless you have a lot of different colors on the screen at the same time, and this applies only to the menus themselves, since the underlying video is a completely separate layer. For normal menus, the video layer can contain the normal state of the buttons with full color, but you are still restricted by the 2-bit depth highlight limitation of Encore.
For popup menus, all of the button image must be contained in the popup itself, and Encore supports the full 8 bits for the normal state. This is because, unlike normal menus where the normal-state buttons are "built-in" to the motion menu, the popup can appear over any part of the underlying video. Actually you can make very nice menus with only 8 bits, because you also have a full 8-bit alpha channel to work with in Photoshop, and the integration with designing in PS & En is very good.
We have a vested interest in helping Encore users because we make BluStreak Premaster, the solution for Encore users to replicate for mass distribution.
http://blustreak.dvdafteredit.com/
We are working on some tutorials to illustrate how to create some very nice results, and hope to begin posting them on our web site in a few weeks.
Regards,
Larry Applegate
Rivergate Software, Inc.

Error burning blu-ray

In Compressor 3.5.3 when I go to burn a blu-ray it ends up saying 'The operation couldn't be completed. (DSPPublishing error - 1006.)'.
Any clues on what is happening, or how to fix?

EdTheC
Thanks for the reply.
Please confirm - does the burn to Blu-ray disc fail if you have less than 23 GB Space Required and no check mark next to "Fit Content
to Available Space". I ran into the following when less than 23 GB Space Required and check mark next to "Fit Content to Available Space".
http://atr935.blogspot.com/2013/05/pe11-blu-ray-burn-dialog-fit-content-to.html
Also...
a. Look at the burn to with and without a check mark next to the Intel HD Graphics 2000 and Higher preference in Expert workspace Edit Menu/Preferences/General.
Also...
a. When you obtained the Blu-ray iso file instead of the disc product, what was the file size of the Blu-ray .iso file that you took to Blu-ray disc with a 3rd party software? And what was that 3rd party software?
Thanks.
ATR

ERROR MESSAGE: Blu-Ray Object: Export File Not Found

What does this mean? I keep getting it during the build process.
Obviously the file is there and can be imported and played in AE or Premeire. It is an uncompressed 1280x720 avi at 23.97fps. My burner is an LG GGW - H20L.
Any insight on this is appreciated.

I had the same problem and changed the preset from MPEG-2 to H.264 and about 20 hours later (on a quad core machine) had a working Blu-Ray disk.

Device error to export on Blu-Ray

In Adobe Elements 4, when i made export to Blu-Ray a device error apear . I repeat the export three times with diferent discs,Verbatim 2xBD-R , Memorex 4xBD-R,and the same problem apear..The computer is a Sony Vaio AR-71S. Please help me...

No need to say that you already tried to restart application.
For 'Device error', try whether device working properly with some other application like Window Movie Maker or other app comes with BluRay burner.
'Device error': try to connect device first and add media to it and than start Premiere Elements
'Device Error': Insert some bluray dics or movie to bluray burner and check whether window explorer able to read it properly.
'Device Error': update Blu-ray burner firmware.
'Device Error': In Premiere Elements, Share, select 'BluRay' not 'DVD' and click on rescan.
Please try these options and till than let me think some more way to help.

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Blue ray Export error code 2

I am using Adobe Encore CS4
Checking the project gives no error. But during Build when transcoding transcoding Following Error Comes
Blu-ray Object;"Movie",Error;"device error",Code "2", Note"Too many streams of PG stream in Clip"(Spec Table 9-3,Annex B)
Encore transcodes the main video. The imported video is in avi format.
The compression setting for the same are
Project Setttings
Authoring Mode blu-ray
Seetings PAL,1920x1080, Mpeg-2,frame rate 25
Maximum Audio/video bitrate 15.0 Mbps
Audio Transcoding PCM
Player Adobe Player
Export Settings
video
1920x1080i,25,high quality
video quality 5,
Profile main
level high
bitrate encoding VBR,2 Pass
Min bitrate 1.5, target 25, max 30
gop m frame 3, nframe 12
Audio
PCM , Output channel Stereo, Sample 16bit
Frequency 48khz

Try Save As and rename the file. Can you export the file now as a different format?
I'm guessing it's a corrupt file or it's written on bad blocks on your drive resulting in problems.
Run Repair Permissions:
1. Open Disk Utility in your Applications/Utility folder.
2. Click on the First Aid tab and select Repair Permissions
3. Click on the icon for your boot volume.
4. Click the repair permissions button.
To Repair your drive, you have to boot from another device.
Option 1) If you have your Install CD for Snow Leopard you can boot from the CD to run Repair Drive.
Option 2) If you have a clone backup, you can boot from the clone and run Repair Drive.

Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"

I have a project a Encore CS6 V6.0.1.013 for MAC.
I tryng export do Blu-ray Disc, but ireceved this error message
Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"
But at "Disc Info" i have 14.71mb free

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

Blu-ray Error:'fatal error", Code:"6", Note: "Empty palette in IG composition.

If i try to burn or create an ISO I get this error.
Blu-ray Error:'fatal error", Code:"6", Note: "Empty palette in IG composition.
Any one have an idea what this means?
Maik

Fixed!
I had a broken /incomplete button in a menu. After replacing it with a new button everything worked.
Maik

Blu-ray Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consi

When i try make a blu Ray (folder or image) i receive this error "
Blu-ray Object: "<Timeline>Untitled Timeline", Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consistent with playList"
is a specific error for blu ray?
Whats happen?.
Thanks a lot
If I create a dvd, all is right, no error are showed a dvd folder is created

Hello:
Finally I could make the Blu Ray disc.
The problem was in put in the same timeline two files in mpg format and psd file with 6 seconds of duration.
(no compatible timeline, causes error code 19)
For a right process a put each file in sperate timeline and end action link to the next file, Then, all go right an BR plays fine.
Maybe there was somthing diferent inside each mpg file , incompatble for a same timeline.
The mpg files were extratecd from dvd (vob files)
I hope that my exprerince help in the future to others persons with the same problems
Thanks all for support
Regards

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

Has anyone sloved Blu-ray Error 25?

Hello,
I am trying to author a Blu-ray DVD and When it comes time to burn I get the following error message:
Blu-ray Error: "not enough free storage", Code "25", Note: "Not enough disc space.
I've serached on these forums and it appears that no one has posted a solution. I've spent about 3 hours on the phone with Adobe technical support and so far they seem to know less about this error than I do. Please help!
-Alan Lockwood

Just another try: the firmware "this unknown".
Just minutes ago I was trying to burn a data CD.
I burned (really BURNED!!!!!!!) 3 CDs without success: it failed all the time.
Tried with other softwares: same result!!
So I went to Pioneer website and downloaded latest firmware that ALREADY I'VE INSTALLED (dated back to July 2008).
Bingoo!! All the two BD writers works great with CDs.
Sometimes some drivers go corrupted by misterious operations (registry data cleaner first (very unuseful)).
So another challenge Vs bad luck could be a refresh.
Obviously, Steph, this is not your case, sorry.
Hope this helps
Ciao
Giorgio

Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
Have tried with Cyberlink removed from machine.... same problem.
Any suggestions??

The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size. It was set-up with simple "Play menu". It burns up to the point of finalization, then the above error message occurs.
I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message. Also tried different brand of discs.
I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud. CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
It seems to be a problem with the Creative Cloud installation on the first computer???

HP Pavillion dv6 w/ windows 7 cannot play blu ray

I have the above mentioned device with a blu ray / dvd player installed with it. Problem is that it won't play blu rays with windows media player and it says empty disc when I try to play with VLC this is the message I get:
Blu-ray error:
This Blu-ray Disc needs a library for AACS decoding, and your system does not have it.
Your input can't be opened:
VLC is unable to open the MRL 'bluray:///D:/'. Check the log for details.
I have no idea what to do, can you help?

Hi,
Try downloading and installing the HP version of Cyberlinks PowerDVD 10 and see if this will play your lu ray discs.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56904.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Code 3 Device Error buring Blu-Ray

Similar Messages

Maybe you are looking for