Code 41 Error when installing my HID keyboard driver with my HID mouse driver

I am developing a HID keyboard driver and a HID mouse driver based on HIDUSBFX2 sample code.
So I added some lines as below into both keyboard driver inf file and mouse driver inf file.
;-------------- Service installation
[hidKeyboard_Device.NT.Services]
AddService = hidKeyboard,, hidKeyboard_Service_Inst
AddService = mshidkmdf,0x000001fa, mshidkmdf_Service_Inst
; -------------- hidKeyboard driver install sections
[hidKeyboard_Service_Inst]
DisplayName    = %hidKeyboard.SVCDESC%
ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
StartType      = 3               ; SERVICE_DEMAND_START
ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\hidKeyboard.sys
; -------------- mshidkmdf driver install sections
[mshidkmdf_Service_Inst]
DisplayName    = %mshidkmdf.SVCDESC%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\mshidkmdf.sys
LoadOrderGroup = Base
[hidKeyboard_Parameters.AddReg]
HKR,,"LowerFilters",0x00010000,"hidKeyboard"
I installed my HID mouse driver first successfully.
And then I tried to install my HID keyboard driver. But the installation was failed with error code 41.
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)
When I checked mshidkmdf service registry, I can find that Owners value is "oem6.inf, oem5.inf"
oem6.inf - keyboard driver inf file, oem5.inf - mouse driver inf file
And when I checked the log with traceview, keyboard driver was not able to receive any IRP from HID class.
On the other hand, mouse driver received the IRP and reinstalled.
* If I uninstall the mouse driver and then install it again, the driver is installed successfully. I mean that this issue was found when first installation.
Please help me~

if you are filtering below the hid miniport, why do you have separate keyboard and mouse infs? For a filter below the miniport just use one inf and the filter will see both the keyboard and mouse requests (assuming you report a keyboard and mouse TLCs
in the hid descriptor)
d -- This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

How do I fix an error code 0x000000c1 when install a printer officeject 6500 with windows 7 64bits?

I am having a problem try to restall my printer back onto my Laptop Windows 7 system. I continue to get the completed down load and on the last step the error code comes up with 0x000000c1. Can someone help please?

Sorry that you are having a problem with re-installing the software and drivers for the printer.
How are you uninstalling your product? It may still have old software on the computer, and it's getting confused between the re-install.
Try the link below to perform a L3 uninstall. Then re-install again.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Uninstall-Software/m-p/2...
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Post code error when installing apps (4s)

Hi, I have a new 4s and I cant install appls because it always says "wrong post code" even though I have entered the right one. Any ideas how to fix this? Thanks

I would suggest you try and update to the latest Ovi Store, now called Nokia Store.
With your phone's browser go to the following address:
http://lr.ovi.mobi/store/new-symbian-3
you should then get the option to install the latest Nokia Store client, and this should include new QT files. Corrupt QT files are usually the problem when installations from the Nokia/Ovi Store fails.

Error code 2329 when installing itunes

I am getting error code 2329 when installing itunes

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

getting error code 150110 when installing Reader on Win7 and there is plenty of disk space. Help!

Hi pat27,
Are you still facing this issue?
Do you have any previous version of Reader installed, if yes and it is 9 or above. Uninstall that using Adobe Reader cleaner tool: http://labs.adobe.com/downloads/acrobatcleaner.html
Once that is uninstalled restart your machine and try install again.
Also you may try to create a new user profile with Admin rights and try to install again.
- How to create new user profile:: Fix a corrupted user profile - Windows Help
Regards,
Ajlan Huda

TA38529 i am getting an error code 2330 when installing itunes, can u help??

i am getting an error code 2330 when installing itunes, can u help??

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Fix for error code 4 when installing?

I keep getting an error code 4 when installing an HP400. Help please?

Nadmace please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html for information on how to resolve the download error.

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Photoshop CS6

Errors when installing Photoshop CS6

I am having a similar issue trying to download PS via CC.
Mac OSX
Here are the details from the installation error:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DS001 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 13 error(s)
----------- Payload: Camera Profiles Installer 7.0.0.0 {539AEF15-3A2B-4A31-A587-7E90F7D9C700} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRawProfile7.0All/AdobeCameraRawProfile7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Player for Embedding 3.3 3.3.0.0 {2591B843-8028-4395-9DEE-03AF8D631539} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeAPE3.3-mul/AdobeAPE3.3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: PDF Settings CS5 10.0.0.0 {84901376-1C55-4BD3-AD2C-F9BDB4449DAC} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFSettings10-mul/AdobePDFSettings10-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe SwitchBoard 2.0 2.0.0.0 {4FFA83C0-007A-4DB3-955C-B5EEE73BEDAF} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/SwitchBoard2.0All/SwitchBoard2.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeCMaps CS6 4.0.0.0 {E8B1DAAA-0B6B-44E6-A2D3-8E418EA0EA85} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCMaps4-mul/AdobeCMaps4-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Suite Shared Configuration CS6 3.0.0.0 {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeSuiteSharedConfiguration3-mul/AdobeSuiteSharedConfiguration3-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Utilities CS6 4.0.0.0 {4F427880-01EA-4E0F-AAE2-9ADE97563A21} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeUtilities4.0-mul/AdobeUtilities4.0-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe XMP Panels 4.0.0.0 {148542D8-49CA-482A-A334-1D54C5A9D53B} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeXMPPanelsAll/AdobeXMPPanelsAll.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobePDFL CS6 10.9.0.0 {557F9FD3-EED8-43D7-AF29-0F19CA832728} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePDFL10.9-mul/AdobePDFL10.9-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: AdobeTypeSupport CS6 11.0.0.0 {A0F72081-99FB-4FFA-AE1A-62B5A656CAC1} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeTypeSupport11-mul/AdobeTypeSupport11-mul.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Photoshop Camera Raw 7 7.0.0.0 {CFC3110A-491C-4DBF-A97D-66C567600A2F} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobeCameraRaw7.0All/AdobeCameraRaw7.0All.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Support 13.0.0.0 {1F955A4A-F365-4379-AEE2-B7C83E1AA883} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Support/AdobePhotoshop13-Support.dmg. Please verify that the disk image is not corrupt.
----------- Payload: Adobe Photoshop CS6 Driver 13.0.0.0 {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} -----------
ERROR: DS001: Failed to mount the disk image at /Volumes/Adobe Photoshop CS6/Adobe Photoshop CS6/payloads/AdobePhotoshop13-Driver/AdobePhotoshop13-Driver.dmg. Please verify that the disk image is not corrupt.

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Encounter error when installing EBS R12.0.4.6 on OEL5.2

Hi,
I met a problem when I installed EBS R12.0.4.6 on Oracle Enterprise Linux 5.2.
The installation was interrupted in the step 2 of 5. It showed RW-50004 error. Then when I clicked retry button, the installation continued until the post-instll checks. Only the Enviroment File and DBC File passed the check.
Following is the error logged in the log file:
========================================================================================
RC-50004: Fatal: Error occurred inApplyDatabase:
Control file creation failed
Cannot execute configure of database usingRapidClone
RW-50010: Error: - script has returned anerror:
1
RW-50004: Error code received when runningexternal process.
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned anerror:
2Configuration Upload
uploading config file at/d01/oracle/VIS/db/tech_st/10.2.0/appsutil/conf_VIS.txtAppsConfig : 'config.txt' uploading...
ADX Database Utility
getConnectionUsingAppsJDBCConnector()-->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost
: dbserv
sDbDomain
: company.com
sDbPort
: 1522
sDbSid
: VIS
sDbUser
: APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbcracle:thindbserv.company.com:1522:VIS
Exception occurred: java.sql.SQLException: Io exception: Got minus onefrom a read call
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL:jdbcracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dbserv.company.com)(PORT=1522))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
AutoConfig completed with errors.
runProcess_5
Statusstring executing Service StartupScript on Apps Node
Executing command:/d01/oracle/VIS/inst/apps/VIS_dbserv/admin/scripts/adstrtal.sh APPS/APPS
You are running adstrtal.sh version120.13.12000000.3
adstrtal.sh: Database connection could notbe established. Either the database is down or the APPS credentials suppliedare wrong.
USAGE:
adstrtal.sh<appsusername/appspassword>
adstrtal.sh: exiting with status 1
Cannot execute Service Startup Script onApps Node
========================================================================================
Have you met this problem before? Do you know how to solve this problem? Please kindly give me some suggestions on it.
Thank you very much.
Best Regards，
Vincent Yang

Hi hsawwan,
In adcrdb_VIS.log, I found the following errors. Could you please give me some suggestion? Thanks a lot.
==========================================================================
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size 1265844 bytes
Variable Size 432017228 bytes
Database Buffers 629145600 bytes
Redo Buffers 11313152 bytes
Control file created.
alter database open resetlogs
ERROR at line 1:
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/d01/oracle/VIS/db/apps_st/data/sys1.dbf'
alter tablespace TEMP1 add tempfile '/d01/oracle/VIS/db/apps_st/data/temp1_01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/d01/oracle/VIS/db/apps_st/data/temp2_01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "VIS.company.com"
ERROR at line 1:
ORA-01109: database not open
ORA-01109: database not open
==========================================================================
Best regards,
Vincent

Error when installing applications

I am getting a error when installing a few different application.
I get this error installing the Citrix Receiver, I get similar errors when installing the Cisco VPN software as well. These are two very important aps for us and need to work on 8.1 if we are to move forward with upgrades.
Product: Citrix Receiver(USB) -- Error 1406. Could not write value GUID to key \SYSTEM\CurrentControlSet\Control\Citrix\Tracing\Modules\IcaClient_GenericUsb_Vdgusb. System error . Verify that you have sufficient access to that key, or contact your support
personnel.
It seams like it is not creating the key in the registry, even though I am a local admin on the system. I have tried running it as a domain admin with the same error. I have also verified I can create keys in the registry
I am currently running Windows 8.1 Enterprise eval on my laptop, we are testing this in our environment.
Thanks in advanced for any help, this one has stumped me a little.

Ask Cisco support/forum for help. This seems to be vendor/product specific
https://supportforums.cisco.com/discussion/12191531/cisco-vpn-client-wont-install-error-1406
http://community.spiceworks.com/topic/492304-cisco-vpn-client-installtion-error-code-1406
http://vootwerk.wordpress.com/2008/06/05/fix-error-1406-during-cisco-vpn-client-installation-or-upgrade/
HTH
Milos

Code 41 Error when installing my HID keyboard driver with my HID mouse driver

Similar Messages

Maybe you are looking for