Code 43 on my HID Support collection
Windows has turned off my HID Support Collection drives & I have recieved a code 43 on my HP Pavilion 360 laptop, what does that mean, & how do I fix this?
This question was solved.
View Solution.
I thank you SO MUCH for trying though!!! My computer apparently has A LOT more issues with it than just 1 drive. You did what you could & for that I am very thankful. Keep up the good work. MAY GOD BLESS YOU FOR ALL THAT YOU DO!!! THANK YOU SO MUCH FOR TRYING TO HELP ME, my computer is just beyond any repair that I personally know how to do.
Similar Messages
-
[SOLVED] X11 hid support broken on fresh macbook install
Hi!
The solution was elementary indeed, I was missing xf86-input-keyboard and xf86-input-mouse. (looooooooooool)
What bugs me though, is how this could happen to an already working system. From what I remember I didn't touch those drivers on my previuos system, I guess I installed them and forgot about them, but why would they break from a system update? Anyway, I guess that's nobody's concern by now. Thread solved.
Old title: X11 hid support completely broken after system update. Now, I've completely reinstalled the system but the error remains. Please read the post below.
I've a problem with X11 support for input devices since running pacman -Syu 2 days ago. This post contains error logs and a description of my attempts to counter the problem. The hardware is a MacBook, first generation. I'm a novice linux user but seasoned with GNU and a quick learner. The solution to this might be simple, but google didn't give me anything usable. All forum threads I found were either unsolved or irrelevant.
This is what has passed. (long story short, may or may not be relevant, my current problem is explained below)
* After the first reboot since the system update, X11 didn't give me anything except a movable cursor. The screen was completely black using the xmonad wm, and when using twm, it was completely distorted with blue patterns. I start searching for sources of the trouble.
* ALSA and pommed complain about driver errors during boot. I can't read the messages because they skip by too quickly. I remove them from rc.conf because I prefer dealing with one problem at a time.
* modprobe complained about framebuffer_blacklist.pacsave having an erroneous extension in /etc/modprobe.d. It actually loaded both the .conf and the .pacsave. I tried swapping between this .pacsave (is it the same or opposite of a .pacorig, btw?) and the .conf. Obviously modprobe stopped complaining when there was no erroneous extension, but I didn't notice it fixing anything else. I'm unsure whether the framebuffer is even relevant.
* I decide that the problem didn't have anything to do with modprobe. I don't know what happened exactly during this phase, but for some strange reason, the graphics cease to be jumbled. twm starts the default programs, but is not interactive. I could move the mouse, but no mouse buttons were working. Keyboard not working at all.
* I decide to wipe X11 and hal. I also rm -rf:ed /usr/share/hal, /etc/hal, /usr/share/X11 and /etc/X11 (yeah, I got angry).
* Reinstalled X11 and hal. Also rm -rf:ed /usr/share/hal, /etc/X11 and /usr/share/X11 (I got really angry). Stuff works now! However, setxkbmap made everything break again, both mouse and keyboard. I read the output of startx and realise evdev hasn't been loaded, since /usr/share/X11/xkb/rules/evdev is missing. The whole folder structure /usr/share/X11/xkb is actually missing. I randomly hit the target and run pacman -S xkeyboard-configure, which creates the folder structure along with the evdev ruleset.
* The keyboard does not work when using evdev. Temporarily renaming it so that it doesn't get loaded fixes the problem. If I'm not mistaken this makes X11 revert to not-hotplugged keyboard and mouse preferences in xorg.conf (which is auto-generated). The keyboard and mouse then works again (but, obviously, not setxkbmap, and I really need input hotplugging as a laptop user).
* It's getting late, so I shutdown and go to bed.
Waking up today, neither keyboard nor mouse is working - also when not using evdev! I've really no idea where to go from here. I've some output for you to analyze:
xorg.conf (auto-generated except for some commented lines I tried)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# Section "ServerFlags"
# Option "AutoAddDevices" "True"
# Option "AllowEmptyInput" "False"
# EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "glx"
Load "extmod"
Load "dri2"
Load "dri"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# Option "XkbOptions" "terminate:ctrl_alt_bksp" (this didn't work)
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg.0.log
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux robban 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 18:07:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020f0/8
(--) PCI: (0:0:2:1) 8086:27a6:8086:7270 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x90380000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "APP", prod id 40028
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "APP", prod id 40028
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 16124 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 483584 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1934332 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f000000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007f600000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007f60b000 physical
(II) intel(0): 0x00fbf000: end of stolen memory
(II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x00fbf000: start of memory manager
(II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 286 x 179
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event2"
(II) HID 05ac:1000: Found 5 mouse buttons
(II) HID 05ac:1000: Found x and y relative axes
(II) HID 05ac:1000: Configuring as mouse
(**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
(**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
(**) HID 05ac:1000: (accel) keeping acceleration scheme 1
(**) HID 05ac:1000: (accel) filter chain progression: 2.00
(**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms
(**) HID 05ac:1000: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event1"
(II) HID 05ac:1000: Found keys
(II) HID 05ac:1000: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad
(**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events
(**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event3"
(II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys
(II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event15"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(WW) Apple Computer Apple Internal Keyboard / Trackpad: unable to handle keycode 464
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) HID 05ac:1000: Close
(II) UnloadModule: "evdev"
(II) HID 05ac:1000: Close
(II) UnloadModule: "evdev"
(II) Apple Computer Apple Internal Keyboard / Trackpad: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
startx_output.log (generated from startx &> startx_output.log)
hostname: Host name lookup failure
xauth: creating new authority file /root/.serverauth.5083
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux robban 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 18:07:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
Setting master
expected keysym, got XF86_Switch_VT_1: line 8 of xfree86
expected keysym, got XF86_Switch_VT_2: line 11 of xfree86
expected keysym, got XF86_Switch_VT_3: line 14 of xfree86
expected keysym, got XF86_Switch_VT_4: line 17 of xfree86
expected keysym, got XF86_Switch_VT_5: line 20 of xfree86
/ ... (There are literally hundreds of lines like this, so I'm cutting most of them) ... /
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
/ ... (The above two lines repeated about 20 times) .../
expected keysym, got XF86Display: line 68 of pc
expected keysym, got XF86KbdLightOnOff: line 69 of pc
expected keysym, got XF86KbdBrightnessDown: line 70 of pc
expected keysym, got XF86_Ungrab: line 90 of keypad
expected keysym, got XF86_ClearGrab: line 96 of keypad
expected keysym, got XF86AudioMedia: line 26 of inet
expected keysym, got XF86AudioPrev: line 27 of inet
expected keysym, got XF86MonBrightnessUp: line 1806 of inet
expected keysym, got XF86MonBrightnessDown: line 1807 of inet
Errors from xkbcomp are not fatal to the X server
expected keysym, got XF86_Switch_VT_1: line 8 of xfree86
expected keysym, got XF86_Switch_VT_2: line 11 of xfree86
expected keysym, got XF86_Prev_VMode: line 54 of xfree86
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
> Using last definition for duplicate fields
/ ... (Above two lines repeated alot again) ... /
/ ... (What looks like everything above repeated once) ... /
expected keysym, got XF86MonBrightnessUp: line 1806 of inet
expected keysym, got XF86MonBrightnessDown: line 1807 of inet
Errors from xkbcomp are not fatal to the X server
/root/.xmonad/xmonad-i386-linux: executeFile: does not exist (No such file or directory)
[i](Yeah, I know this is bad, but twm doesn't work either. I'm quite sure it has nothing to do with xmonad)[/i]
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Failed to open input method
Warning: locale not supported by Xlib, locale set to C
Warning: X locale modifiers not supported, using default
Failed to open input method
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 662 requests (662 known processed) with 5 events remaining.
[i](This is from "killall X". My xinitrc has "sleep 8;killall X" appended since these problems started appearing)[/i]
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0.0"
xinit: connection to X server lost.
waiting for X server to shut down .Dropping master
error setting MTRR (base = 0x80000000, size = 0x10000000, type = 1) Invalid argument (22)
Output of pacman -Q: (maybe there are some conflicting drivers or something?)
a52dec 0.7.4-4
aalib 1.4rc5-6
acl 2.2.47-2
alsa-lib 1.0.20-1
alsa-oss 1.0.17-1
alsa-utils 1.0.20-2
apache 2.2.11-3
apr 1.3.5-1
apr-util 1.3.7-1
aspell 0.60.6-4
at-spi 1.26.0-1
atk 1.26.0-1
attr 2.4.43-1
aubio 0.3.2-3
audiofile 0.2.6-4
autoconf 2.63-1
automake 1.11-1
avahi 0.6.25-1
bash 4.0.024-1
bin86 0.16.17-4
binutils 2.19.1-5
bison 2.4.1-1
blas 20070405-2
bluez 4.39-1
bzip2 1.0.5-4
ca-certificates 20090709-1
cabextract 1.2-2
cairo 1.8.8-1
cairomm 1.8.2-1
cdargs 1.35-2
cdparanoia 10.2-2
chmlib 0.40-1
cloog-ppl 0.15.3-1
compositeproto 0.4-2
confuse 2.6-1
consolekit 0.3.0-5
coreutils 7.4-1
cpio 2.9-5
cpufrequtils 005-2
cracklib 2.8.13-2
cryptsetup 1.0.6-3
csup 20060318-5
curl 7.19.5-2
damageproto 1.1.0-2
dash 0.5.5.1-2
db 4.7.25.4-1
db4.1 4.1.25-2
dbus 1.2.14-1
dbus-core 1.2.14-1
dbus-glib 0.80-1
dcron 3.2-4
desktop-file-utils 0.15-1
device-mapper 1.02.33-1
dhcpcd 5.0.6-1
dialog 1.1_20080819-2
diffutils 2.8.1-6
dmapi 2.2.10-1
dmenu 4.0-1
dmidecode 2.10-1
dmxproto 2.2.2-2
docbook-xml 4.5-2
doxygen 1.5.9-1
dri2proto 2.1-1
dwm 5.6-1
dzen2 0.8.5-4
e2fsprogs 1.41.8-1
ed 1.3-1
eject 2.1.5-4
emacs 22.3-2
enca 1.9-4
enchant 1.4.2-1
esound 0.2.41-1
eventlog 0.2.9-1
exempi 2.1.0-1
exiv2 0.18-1
expat 2.0.1-2
faac 1.28-1
faad2 2.7-1
fakeroot 1.12.4-1
fam 2.7.0-14
feh 1.3.4-5
ffmpeg 0.5-1
fftw 3.2.1-1
file 5.03-2
filesystem 2009.01-2
findutils 4.4.2-1
firefox 3.5.1-1
fixesproto 4.0-3
flac 1.2.1-1
flashplugin 10.0.22.87-1
flex 2.5.35-3
fluidsynth 1.0.9-1
fontcacheproto 0.1.2-2
fontconfig 2.6.0-2
fontsproto 2.0.2-2
fox 1.6.36-1
freetype2 2.3.9-2
fribidi 0.19.2-1
fuse 2.7.4-3
gawk 3.1.6-3
gc 7.1-1
gcc 4.4.0-5.1
gcc-libs 4.4.0-5
gconf 2.26.2-2
gdbm 1.8.3-6
gen-init-cpio 2.6.17-3
gettext 0.17-3
ghc 6.10.3-1
giblib 1.2.4-4
giflib 4.1.6-3
glib 1.2.10-7
glib2 2.20.4-1
glibc 2.10.1-3
glibmm 2.20.1-1
gmp 4.3.1-2
gmrun 0.9.2-2
gnutls 2.8.1-1
gpm 1.20.6-1
grep 2.5.4-3
groff 1.20.1-2
grub 0.97-15
gsfonts 8.11-5
gstreamer0.10 0.10.23-1
gstreamer0.10-base 0.10.23-1
gstreamer0.10-base-plugins 0.10.23-2
gstreamer0.10-ffmpeg 0.10.7-1
gstreamer0.10-good 0.10.15-1
gtk 1.2.10-9
gtk-engines 2.18.2-1
gtk2 2.16.5-1
gtkmm 2.16.0-1
gvim 7.2.65-1
gzip 1.3.12-6
hal 0.5.12git20090421.4fc367-2
hal-info 0.20090414-1
haskell-utf8-string 0.3.5-1
haskell-x11 1.4.5-1.2
haskell-x11-xft 0.3-5
hdparm 9.15-1
heimdal 1.2.1-5
herrie 2.2-2
hicolor-icon-theme 0.10-2
hunspell 1.2.8-1
hwdetect 2009.07-1
imlib2 1.4.2-3
initscripts 2009.03-2
inputproto 1.5.0-1
intel-dri 7.5-1
iputils 20071127-2
irssi 0.8.13-1
iso-codes 3.10.1-1
jack-audio-connection-kit 0.116.2-2
jdk 6u14-1
jfsutils 1.1.14-1
jre 6u14-1
kbd 1.15-1
kbproto 1.0.3-2
kernel-headers 2.6.30.1-1
kernel26 2.6.30.1-1
kernel26-firmware 2.6.30-1
klibc 1.5.15-3
klibc-extras 2.5-4
klibc-kbd 1.15.20080312-10
klibc-module-init-tools 3.8-1
klibc-udev 141-3
ladspa 1.13-2
lame 3.98.2-2
lapack 3.2.1-1
lcms 1.18-2
less 429-1
lesstif 0.95.0-3
libao 0.8.8-2
libarchive 2.7.0-2
libart-lgpl 2.3.20-1
libass 0.9.6-2
libavc1394 0.5.3-3
libbeagle 0.3.9-1
libbonobo 2.24.1-1
libcaca 0.99.beta16-1
libcanberra 0.14-1
libcap 2.16-3
libcddb 1.3.2-1
libcdio 0.81-2
libcups 1.3.11-1
libdaemon 0.13-2
libdatrie 0.2.2-1
libdca 0.0.5-1
libdmx 1.0.2-2
libdownload 1.3-3
libdrm 2.4.12-1
libdv 1.0.0-2
libdvbpsi 0.1.6-3
libdvdnav 4.1.3-1
libdvdread 4.1.3-1
libebml 0.7.8-1
libexif 0.6.17-1
libfontenc 1.0.4-2
libftdi 0.15-3
libgcrypt 1.4.4-2
libgl 7.5-1
libglade 2.6.4-1
libgpg-error 1.6-1
libgtop 2.26.1-1
libical 0.43-1
libice 1.0.5-1
libid3tag 0.15.1b-3
libidl2 0.8.13-1
libiec61883 1.2.0-1
libjpeg 7-1
libldap 2.3.43-3
liblo 0.25-1
liblrdf 0.4.0-6
libmad 0.15.1b-4
libmatroska 0.8.1-2
libmikmod 3.1.12-2
libmng 1.0.10-2
libmodplug 0.8.7-1
libmp4v2 1.6-1
libmpcdec 1.2.6-1
libmpd 0.18.0-1
libmpeg2 0.5.1-1
libmtp 0.3.7-1
libmysqlclient 5.1.36-1
libnl 1.1-1
libnotify 0.4.5-1.1
libogg 1.1.3-2
liboil 0.3.16-1
libpcap 1.0.0-1
libpciaccess 0.10.6-1
libpng 1.2.38-1
libproxy 0.2.3-1
libraw1394 2.0.2-1
libsamplerate 0.1.7-1
libsasl 2.1.23-1
libsexy 0.1.11-1
libshout 2.2.2-3
libsigc++2.0 2.2.3-1
libsm 1.1.0-1
libsndfile 1.0.20-3
libtasn1 2.2-1
libthai 0.1.12-1
libtheora 1.0-1
libtiff 3.8.2-5
libtirpc 0.2.0-1
libtool 2.2.6a-2
libtorrent 0.12.2-2
libtracker 0.6.95-1
libunique 1.0.8-1
libusb 0.1.12-3
libv4l 0.5.99-1
libvisual 0.4.0-2
libvorbis 1.2.1rc1-2
libwnck 2.26.2-1
libx11 1.2.1-1
libx86 1.1-2
libxau 1.0.4-1
libxaw 1.0.6-1
libxcb 1.2-1
libxcomposite 0.4.0-2
libxcursor 1.1.9-2
libxdamage 1.1.1-2
libxdmcp 1.0.2-2
libxext 1.0.5-2
libxfce4util 4.6.1-1
libxfcegui4 4.6.1-1
libxfixes 4.0.3-2
libxfont 1.4.0-1
libxfontcache 1.0.4-2
libxft 2.1.13-1
libxi 1.2.1-1
libxinerama 1.0.3-2
libxkbfile 1.0.5-1
libxklavier 3.9-2
libxml2 2.7.3-2
libxmu 1.0.4-2
libxp 1.0.0-2
libxpm 3.5.7-1
libxrandr 1.3.0-1
libxrender 0.9.4-2
libxres 1.0.3-2
libxslt 1.1.24-2
libxspf 1.2.0-1
libxss 1.1.3-1
libxt 1.0.6-1
libxtst 1.0.3-2
libxv 1.0.4-1
libxvmc 1.0.4-2
libxxf86dga 1.0.2-2
libxxf86misc 1.0.1-2
libxxf86vm 1.0.2-1
licenses 2.4-1
links 2.2-2
lirc-utils 0.8.5-1
lm_sensors 3.1.1-1
logrotate 3.7.8-1
lrmi 0.10-1
lua 5.1.4-4
lvm2 2.02.48-1
lzo2 2.03-1
m4 1.4.13-1
madwifi 0.9.4.3952-5
madwifi-utils 0.9.4.3952-1
mailx 8.1.1-7
make 3.81-4
man-db 2.5.5-2
man-pages 3.21-1
mcpp 2.7.2-2
mdadm 2.6.9-1
mesa 7.5-1
mime-types 1.0-2
mkinitcpio 0.5.25-1
mlocate 0.22-1
module-init-tools 3.8-1
mozilla-common 1.4-1
mozplugger 1.12.1-1
mpd 0.14.2-1
mpfr 2.4.1-1
mysql 5.1.36-1
mysql-clients 5.1.36-1
nano 2.0.9-2
ncurses 5.7-2
net-tools 1.60-14
netbeans 6.7-1
nspr 4.8-1
nss 3.12.3-1
openssl 0.9.8k-4
orbit2 2.14.17-1
pacman 3.2.2-1
pacman-mirrorlist 20090616-1
pam 1.0.4-1
pango 1.24.5-1
pangomm 2.24.0-1
patch 2.5.9-2
pciutils 3.1.2-1
pcmciautils 015-2
pcre 7.9-1
perl 5.10.0-6
perl-xml-simple 2.18-2
perlxml 2.36-1
php 5.2.10-3
pixman 0.14.0-2
pkgconfig 0.23-1
pm-utils 1.2.5-1
policykit 0.9-9
pommed 1.26-3
popt 1.14-1
ppl 0.10.2-2
ppp 2.4.4-9
printproto 1.0.4-1
procinfo 19-3
procps 3.2.8-1
psmisc 22.7-1
pycairo 1.8.6-1
pygobject 2.18.0-1
pygtk 2.14.1-4
python 2.6.2-5
python-gdata 1.3.1-1
python-numpy 1.3.0-2
qt 4.5.2-3
rake 0.8.6-1
randrproto 1.3.0-1
raptor 1.4.18-1
rarian 0.8.1-1
readline 6.0.003-1
recode 3.6-3
recordproto 1.13.2-2
reiserfsprogs 3.6.21-1
renderproto 0.9.3-2
rp-pppoe 3.10-1
rpcbind 0.2.0-1
rtorrent 0.8.2-3
ruby 1.8.7_p174-1
rubygems 1.3.3-1
run-parts 3.1.3-1
rxvt-unicode 9.06-2
schismtracker 0.5rc1-1
screen 4.0.3-8
scrnsaverproto 1.1.0-2
sdl 1.2.13-3
sdl_image 1.2.7-2
sdparm 1.03-2
sed 4.2.1-1
shadow 4.1.4.1-1
shaman 1.0.9-1
shared-mime-info 0.60-1
smbclient 3.3.6-2
sound-theme-freedesktop 0.2-1
speex 1.2rc1-1.1
sqlite3 3.6.15-2
startup-notification 0.10-1
sudo 1.7.2-1
sysfsutils 2.1.0-5
syslog-ng 3.0.3-1
sysvinit 2.86-5
t1lib 5.1.2-2
taglib 1.5-1
tar 1.22-1
tcp_wrappers 7.6-10
tdb 3.3.6-1
terminus-font 4.28-1
texinfo 4.13a-3
ttf-dejavu 2.29-1
tzdata 2009j-1
udev 141-3
unixodbc 2.2.14-2
unrar 3.9.4-1
unzip 6.0-4
uriparser 0.7.5-1
usbutils 0.84-1
util-linux-ng 2.14.2-1
vbetool 1.1-1
vi 7.2.65-1
videoproto 2.2.2-2
vim 7.2.65-1.1
vim-minibufexpl 6.3.2-4
w3m 0.5.2-3
wavpack 4.50.1-1
wget 1.11.4-1
which 2.20-1
wireless_tools 29-3
wpa_supplicant 0.6.9-2
x264 20090416-1
xbitmaps 1.0.1-2
xcb-proto 1.4-1
xcb-util 0.3.4-2
xcursor-themes 1.0.1-2
xextproto 7.0.5-1
xf86-input-evdev 2.2.2-1
xf86-input-synaptics 1.1.2-1
xf86-video-intel 2.7.99.902-1
xf86dgaproto 2.0.3-2
xf86miscproto 0.9.2-2
xf86vidmodeproto 2.2.2-2
xfconf 4.6.1-1
xfe 1.19.2-1
xfsprogs 3.0.1-1
xineramaproto 1.1.2-2
xkeyboard-config 1.6-1
xmlrpc-c 1.06.35-1
xmobar 0.9.2-1
xmonad 0.8.1-1.2
xmonad-contrib 0.8.1-1.2
xorg-apps 7.4-2
xorg-font-utils 7.4-2
xorg-fonts-100dpi 1.0.1-2
xorg-fonts-75dpi 1.0.1-2
xorg-fonts-alias 1.0.1-2
xorg-fonts-encodings 1.0.2-3
xorg-fonts-misc 1.0.0-4
xorg-res-utils 1.0.3-3
xorg-server 1.6.2-1
xorg-server-utils 7.4-6
xorg-twm 1.0.4-3
xorg-utils 7.4-4
xorg-xauth 1.0.3-1
xorg-xinit 1.1.1-1
xorg-xkb-utils 7.4-2
xpacman 0.11-4
xpdf 3.02_pl3-1
xproto 7.0.15-1
xterm 243-2
xulrunner 1.9.1.1-1
xvidcore 1.2.1-1
xz-utils 4.999.8beta-4
zenity 2.26.0-2
zip 3.0-1.1
zlib 1.2.3.3-3
zsh 4.3.10-1
zvbi 0.2.26-1
Any help would be greatly appreciated! This is too much for me to handle by myself. I'm thinking of trying debian if I can't sort this out, so be a patriot!
Love,
sapht
Last edited by sapht (2009-07-23 17:45:07)Alright, I got fed up and decided to reinstall the system.
Only installed wireless_tools, madwifi, hal, xorg and xf86-video-intel.
Edited /etc/X11/xorg.conf to select the intel video driver.
The mouse and keyboard are still frozen.
Here are some much cleaner Xorg.0.log, xorg.conf and startx_output.log files, I hope it will be easier for any readers of this post to find errors here:
Output of startx:
hostname: Host name lookup failure
xauth: creating new authority file /root/.serverauth.4956
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux datan 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
Build Date: 28 June 2009 11:20:52AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 23 13:37:55 2009
(==) Using config file: "/etc/X11/xorg.conf"
Setting master
(again, this is where 'killall X' from xinitrc runs)
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 507 requests (507 known processed) with 2 events remaining.
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0.0"
xinit: connection to X server lost.
waiting for X server to shut down .Dropping master
error setting MTRR (base = 0x80000000, size = 0x10000000, type = 1) Invalid argument (22)
xorg.conf
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
# Section "ServerLayout"
# Identifier "X.org Configured"
# Screen 0 "Screen0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
# EndSection
# Section "Files"
# ModulePath "/usr/lib/xorg/modules"
# FontPath "/usr/share/fonts/misc"
# FontPath "/usr/share/fonts/100dpi:unscaled"
# FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# EndSection
# Section "Module"
# Load "extmod"
# Load "glx"
# Load "record"
# Load "dri"
# Load "dri2"
# Load "dbe"
# EndSection
And Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux datan 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
Build Date: 28 June 2009 11:20:52AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 23 13:33:48 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x640
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020f0/8
(--) PCI: (0:0:2:1) 8086:27a6:8086:7270 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x90380000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(--) intel(0): Using UXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "APP", prod id 40028
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "APP", prod id 40028
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 16124 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 483584 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1934332 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f000000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007f600000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007f60b000 physical
(II) intel(0): 0x00fbf000: end of stolen memory
(II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x00fbf000: start of memory manager
(II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(WW) intel(0): ESR is 0x00000010, page table error
(WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 286 x 179
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event2"
(II) HID 05ac:1000: Found 5 mouse buttons
(II) HID 05ac:1000: Found x and y relative axes
(II) HID 05ac:1000: Configuring as mouse
(**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
(**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
(**) HID 05ac:1000: (accel) keeping acceleration scheme 1
(**) HID 05ac:1000: (accel) filter chain progression: 2.00
(**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms
(**) HID 05ac:1000: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 05ac:1000
(**) HID 05ac:1000: always reports core events
(**) HID 05ac:1000: Device: "/dev/input/event1"
(II) HID 05ac:1000: Found keys
(II) HID 05ac:1000: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad
(**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events
(**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event3"
(II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys
(II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event15"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) HID 05ac:1000: Close
(II) UnloadModule: "evdev"
(II) HID 05ac:1000: Close
(II) UnloadModule: "evdev"
(II) Apple Computer Apple Internal Keyboard / Trackpad: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
Reading Xorg.0.log myself, I find nothing that would imply the input devices have been erroneosly loaded. What is going on? Surely I must have missed something?
Best regards,
sapht -
PLS-00630: pipelined functions must have a supported collection return type
Hello, I created an TYPE of OBJECT and a PLSQL Function as shown below, but the function compilation errors with following. Not sure where is the issue?
PLS-00630: pipelined functions must have a supported collection return typeThis is on Oracle 10g r2
CREATE OR REPLACE TYPE cxs_plsql_profiler_object_type AS OBJECT (
cxs_object_name VARCHAR2 (128),
cxs_object_type VARCHAR2 (19),
cxs_object_status VARCHAR2 (7),
cxs_read_execution NUMBER,
cxs_buffer_gets NUMBER,
cxs_disk_reads NUMBER,
cxs_executions NUMBER,
cxs_sorts NUMBER,
cxs_sharable_mem NUMBER,
cxs_address NUMBER,
cxs_hashvalue NUMBER,
cxs_osuser VARCHAR2 (30),
cxs_username VARCHAR2 (30),
cxs_module VARCHAR2 (48),
cxs_machine VARCHAR2 (64),
cxs_status VARCHAR2 (8),
cxs_terminal VARCHAR2 (16),
cxs_percentconsume NUMBER,
cxs_percentrepeat NUMBER,
cxs_plan VARCHAR2 (120),
target_name VARCHAR2 (200),
referenced_name VARCHAR2 (200),
referenced_type VARCHAR2 (200),
targetowner VARCHAR2 (200),
refowner VARCHAR2 (200)
)and here is the API
FUNCTION CXS_GENERATE_PLSQL_PROFILER
RETURN cxs_plsql_profiler_object_type
PIPELINED IS
out_rec cxs_plsql_profiler_object_type ;
plsbatch plsql_batch;
skount integer;
dpendrec depend_tab;
dkount integer;
CURSOR objects
IS
SELECT object_name, object_type
FROM dba_objects
WHERE status = 'VALID'
AND owner NOT IN ('SYS', 'SYSTEM')
AND object_type IN ('PACKAGE', 'PROCEDURE', 'FUNCTION');
CURSOR apis (p_object dba_objects.object_name%TYPE)
IS
SELECT DISTINCT *
FROM (SELECT SUBSTR (a.sql_text, 1, 50) sql_text,
TRUNC
( a.disk_reads
/ DECODE (a.executions,
0, 1,
a.executions
) reads_per_execution,
a.buffer_gets, a.disk_reads, a.executions,
a.sorts, a.sharable_mem, a.address,
a.hash_value, b.osuser, b.username,
b.module, b.machine, b.status, b.terminal,
ROUND
(cxs_db_info.kompute_percentofsql
(a.sharable_mem),
5
) percentkonsume,
cxs_db_info.kount_repeat
(b.osuser,
b.terminal
) percentr,
c.operation explainplan
FROM v$sqlarea a, v$session b, v$sql_plan c
WHERE b.sql_hash_value = a.hash_value
AND b.sql_address = a.address
AND a.hash_value = c.hash_value
AND a.address = c.address
AND b.status = 'ACTIVE'
AND UPPER (a.sql_text) LIKE
'%' || p_object || '%'
AND c.ID = 0
ORDER BY 2 DESC)
WHERE ROWNUM <= 50; --profile option
BEGIN
skount := 0;
dkount := 0;
FOR i IN objects
LOOP
FOR j IN apis (i.object_name)
LOOP
skount := skount + 1;
plsbatch(skount).cxs_object_name := i.object_name;
plsbatch(skount).cxs_object_type := i.object_type;
plsbatch(skount).cxs_object_status := i.object_status;
plsbatch(skount).cxs_read_execution := j.reads_per_execution;
plsbatch(skount).cxs_buffer_gets := j.buffer_gets;
plsbatch(skount).cxs_disk_reads := j.disk_reads;
plsbatch(skount).cxs_executions := j.executions;
plsbatch(skount).cxs_sorts := j.sorts;
plsbatch(skount).cxs_sharable_mem := j.sharable_mem;
plsbatch(skount).cxs_address := j.address;
plsbatch(skount).cxs_hashvalue := j.hashvalue;
plsbatch(skount).cxs_osuser := j.osuser;
plsbatch(skount).cxs_username := j.username;
plsbatch(skount).cxs_module := j.module;
plsbatch(skount).cxs_machine := j.machine;
plsbatch(skount).cxs_status := j.status;
plsbatch(skount).cxs_terminal := j.terminal;
plsbatch(skount).cxs_percentconsume := j.percentconsume;
plsbatch(skount).cxs_percentrepeat := j.percentrepeat;
plsbatch(skount).cxs_plan := j.explainplan;
END LOOP;
FOR dd IN dpend (i.object_name)
LOOP
dkount := dkount + 1;
dependrec (dkount).target_name := dd.NAME;
dependrec (dkount).refname := dd.referenced_name;
dependrec (dkount).reftype := dd.referenced_type;
dependrec (dkount).target_owner := dd.owner;
dependrec (dkount).refowner := dd.referenced_owner;
END LOOP;
END LOOP;
for a in 1..skount loop
out_rec.cxs_object_type := plsbatch(a).object_type;
out_rec.cxs_object_status := plsbatch(a).object_status;
out_rec.cxs_read_execution := plsbatch(a).reads_per_execution;
out_rec.cxs_buffer_gets := plsbatch(a).buffer_gets;
out_rec.cxs_disk_reads := plsbatch(a).disk_reads;
out_rec.cxs_executions := plsbatch(a).executions;
out_rec.cxs_sorts := plsbatch(a).sorts;
out_rec.cxs_sharable_mem := plsbatch(a).sharable_mem;
out_rec.cxs_address := plsbatch(a).address;
out_rec.cxs_hashvalue := plsbatch(a).hashvalue;
out_rec.cxs_osuser := plsbatch(a).osuser;
out_rec.cxs_username := plsbatch(a).username;
out_rec.cxs_module := plsbatch(a).module;
out_rec.cxs_machine := plsbatch(a).machine;
out_rec.cxs_status := plsbatch(a).status;
out_rec.cxs_terminal := plsbatch(a).terminal;
out_rec.cxs_percentconsume := plsbatch(a).percentconsume;
out_rec.cxs_percentrepeat := plsbatch(a).percentrepeat;
out_rec.cxs_plan := plsbatch(a).explainplan;
PIPE ROW(out_rec);
end loop;
for b in 1..dkount loop
out_rec.target_name := dd.NAME;
out_rec.refname := dependrec (b).referenced_name;
out_rec.reftype := dependrec (b).referenced_type;
out_rec.target_owner := dependrec (b).owner;
out_rec.refowner := dependrec (b).referenced_owner;
PIPE ROW(out_rec);
end loop;
RETURN;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(DBMS_UTILITY.format_error_backtrace);
DBMS_OUTPUT.PUT_LINE(SQLCODE);
DBMS_OUTPUT.PUT_LINE(SQLERRM);
END; and below are tradtional table types that are used in code above.
TYPE type_plsql_rec IS RECORD (
cxs_object_name VARCHAR2 (128),
cxs_object_type VARCHAR2 (19),
cxs_object_status VARCHAR2 (7),
cxs_read_execution NUMBER,
cxs_buffer_gets NUMBER,
cxs_disk_reads NUMBER,
cxs_executions NUMBER,
cxs_sorts NUMBER,
cxs_sharable_mem NUMBER,
cxs_address NUMBER,
cxs_hashvalue NUMBER,
cxs_osuser VARCHAR2 (30),
cxs_username VARCHAR2 (30),
cxs_module VARCHAR2 (48),
cxs_machine VARCHAR2 (64),
cxs_status VARCHAR2 (8),
cxs_terminal VARCHAR2 (16),
cxs_percentconsume NUMBER,
cxs_percentrepeat NUMBER,
cxs_plan VARCHAR2 (120)
TYPE plsql_batch IS TABLE OF type_plsql_rec
INDEX BY BINARY_INTEGER;
TYPE type_depend_tab IS RECORD (
target_name dba_dependencies.NAME%TYPE,
refname dba_dependencies.referenced_name%TYPE,
reftype dba_dependencies.referenced_type%TYPE,
target_owner dba_dependencies.owner%TYPE,
refowner dba_dependencies.referenced_owner%TYPE
TYPE depend_tab IS TABLE OF type_depend_tab
INDEX BY BINARY_INTEGER;
Thank you for your time in reading this post
RThank you Billy and Saubhik,
I have followed your guidelines and was able to resolve this error. Now, after successfully compiling the code, I attempted to execute it in a following way.
SELECT * FROM TABLE (cxs_generate_plsql_profiler);It gives following error: ORA-00904: "CXS_GENERATE_PLSQL_PROFILER": invalid identifier
I also tried putting in quotes like below
SELECT * FROM TABLE ('cxs_generate_plsql_profiler');Then, it gives following error:
ORA-22905: cannot access rows from a non-nested table item
Any Idea where I am doing wrong?
Thanks,
R -
Yoga 13: HID Sensor Collection : Auto-rotate functionality
Hi Guys,
I bought the Yoga 13 with Windows 8 but the non pro version. I wanted the pro version on so I can connect to a domain so I did a clean install - where I deleted the partition with the old OS.
Everything went great and all drivers that were are on the other partition that I left alone installed fine.
Here is the problem: I noticed that the auto-rotate functionality no longer works. After doing some research I found that the HID Sensor Collection is what controls this. If I look at the device manager I can see that their is a exclamation point next to the HID Sensor Collection Driver along with the Light Sensor driver.
They both give me the error:
This device cannot start (Code 10).
The process hosting the driver for this device has terminated.
I tried uninstalling and reinstalling the driver - this didn't help.
I've tried searching for this driver online - no luck.
I tried using the "update driver software" and it says: Windows has determined that your driver software for this device is up to date.
Any ideas how I can get the HID Sensor Collection working?
Thanks for your help!
Solved!
Go to Solution.I had excatly the same problem after Windows 8 Pro N 64bit install, the device manager showed HID Sensor Collection and Light Sensor with exclamation points.
I found out that this might have something to do with Windows User Mode Driver Framework, Windows Media Player contains and utilises it. As Windows 8 Pro N didn't contain Media player, I downloaded it as Media Feature Pack from http://www.microsoft.com/en-us/download/details.aspx?id=30685. After the install HID Sensor Collection and Light Sensor were fine. Also Simple Device Orientation Sensor appeared. -
Need HID Sensor Collection V2 Driver for Yoga 2 Tablet 10
The Yoga 2 Tablet 10 works very well with the 9879 version of Windows 10. The only thing that I'm seeing as missing is that the screen will not auto-rotate. Device Manager shows that the HID Sensor Collection V2 Driver in not functioning.
Does Lenovo have a driver download location for this device? I expect that the Windows 8.1 version would work.Good day.
You have the 1051 model tablet, correct?
When (if) drivers become available, I would expect them to be listed here:
http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
As of now, though, I don't see anything available, so you'll need to keep checking.
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee. -
Surface Pro 3 Windows 8.1 Pro N HID Sensor Collection
I've been tasked with creating an enterprise image on the surface pro 3. I'm using MDT 2013. I've added the driver pack to MDT for the surface pro 3.
All drivers install except for HID Sensor collection device and the simple device orientation sensor.
However, if I deploy my personal windows 8.1 pro image to the computer, it works fine. Just not with 8.1 Pro N.
In device manager it says error 10, cannot start device for the collection device. The orientation sensor is not even listed.
Any help would be appreciated. All windows updates have been applied.The two files in use by "Simple Device Orientation Sensor" in Device Manager are: c:\windows\system32\drivers\umdf\sensorservicedriver.dll
**I do not have this driver
c:\windows\system32\drivers\wudfrd.sys
**This driver is present
There is also a "sensor monitoring service" service running. When disabled it breaks the ambient light and rotation sensor (probably other items too). At least that is a place to start. I can try and zip these to an email account if you like to
see if it helps at all.
**THIS WAS THE KEY** I found this in Services, and it was actually running, set to 'Manual.' I stopped the service and saw my screen brightness (assuming because it disabled the ambient light sensor) come on to full. I then changed it to Automatic, and restarted
the service. After this I wishfully rotated my Y3P 90 degrees clockwise and the auto rotate did its job! I completely shut down the Y3P and booted up again... still working!
I'm curious as to why it wasn't working even when the service was running, but not going to dwell on it now that everything is peachy.
I really appreciate your time and help on an issue that diverged from the OP. I know this may break forum etiquette a bit but I was on a wild goose chase trying to find the solution. KUDOS! KUDOS FOR THIS MAN!!! -
Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support
Any ideas?Hi Serpent,
Try the following Steps:
open activity monitor and close all Adobe related applications
navigate to: /Library/Application support/Adobe
In that directory you will see a folder named OOBE - Rename that folder to OOBEold
Navigate to: MAC HD /Application/Utilities directory
In there you will see a folder called "Adobe Application Manager" - delete it
Download the Adobe Cleaner Tool from here: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems/_jcr_conte nt/main-pars/accordion_container_1/accordion-par/accordion-item-1/accordion-item-par/proc e dure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleanerTool.zip
Open the Cleaner Tool and choose to clean "Creative Cloud" only.
Download and install Creative Cloud again - https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
Regards,
Rave -
I got this message when I tried to update CC on my PC. Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support
Anyone know how to helpKbw1223 please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve the current error.
-
I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
Hi,
We have already released our product for WinRT desktop and tablet versions.
Now we are developing the same app for Windows 8.1 Phone.
We are supporting 'Windows-1250', 'Windows-1251', 'Windows-1252', 'Windows-1253', 'Windows-1254', 'Shift-JIS', 'GB2312' and 'Big5' in both desktop and tablet versions which uses WinRT API's.
But in Windows 8.1 Phone version, i am getting 'ArgumentException' saying 'Windows-1252' is not a supported encoding name.
Please help me with a solution or workaround to support the above specified code pages for Encoding.
Regards,
Balaji Reddy. MDoes CP-1252 work? If not, this page may help:
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/cf5ca6c9-72b0-4abb-9ef5-ff77226ec642/how-to-handle-unsupported-encoding-in-xml?forum=wpdevelop
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces. -
Urgent - Does report 6.0 release supports collection types
Hi,
We went through the report 6.0 of developer 6.0(beta). There we
found that it does currently supports all Oracle8 features. The
major unsupported features are:
1. Collection types (nested tables and varying arrays).
2. Stored procedures that return object values.
But for our forthcoming project we need extensive supports of
oracle 8 new features like REF, nested table, varying arrays as
well as stored procedures that return object values.
So can anybody tell me whether Developer 6.0 realease version
supports those features.
Thanks & regards.
Ashokejyoti Biswas
nullMahesh Gangarapu (guest) wrote:
: RESPECTED Seniors and Fellow Partners,
: When I first loaded O8 ver 8.0.4.xxx and then tried to load
: dev6 . The D6 installation used remove my primary database
: created . Then I devised a plan I loaded D6 first and then
: installed O8 ver 8.0.4 . The initial (primary) database was
: created and i could connect from D6 to my O8 database . But the
: problem now is that THE D6 supports simple OBJECT types but it
: does not support NESTED TABLES . The ERROR i get is DATABASE
: ERROR 1
: can you help me out with this problem of mine
: THAnk you
: Mahesh
Hi Mahesh
I've tried this in Forms5.0 and ended up with an error which says
unsupported network data type.
The only way, as far as I know , to use a new object feature in
Oracle 8 through developer R2.x or also R6.0 (i haven't seen
this) is use a data block created with a stored procedure at the
back end. U can use REF cursor as one of the parameters in the
procedure and table type as another parameter. This option will
definitely work for U. I have done this some time . U should
create a package with procedures to select , insert , delete and
update respectively and when U associate a block with this Forms
will tale care of coding triggers like
select-procedure
insert-procedure
delete-procedure
update-procedure
lock-procedure
Bye Rajesh
null -
Using existing c code for usb-hid communication in labview
Hello,
I want to write a simple temperatrue logger using labview and a external hardware which communicates over usb-hid. The external hardware uses an ATMEL 90USB162 µC and DS18B20 sensors.
Link to the hardware:
http://www.diamex.de/dxshop/USB-Temperatur-Sensor-Tester-fuer-DS18B20
The source of a a simple command line tool is available (see attachement), which reads out the temperature value of the connected sensors.
Is it possible to include this c-code in the labview application to simplify the communication?
Thanks a lot and best regards,
Michael
Solved!
Go to Solution.
Attachments:
CMDLINE.zip 17 KBI'm not that experienced at this personally (in terms of compiling C code into DLLs), but I believe the process you need to go down to call your C code in LabVIEW is to compile the C code into a DLL which you can then call from LabVIEW using a Call Library Function node (or you can try to use the "Import Shared Library" wizard to automatically generate SubVIs).
There's more information here:
http://digital.ni.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
42% Creative Cloud desktop failed to update.(Error code: 50) Contact Customer Support
Any answers for this?
Error 50 https://forums.adobe.com/thread/1432237 may help
or
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and turning off your firewall
-also flush your browser cache so you are starting with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
i can only use my photoshop serial code twice and need to deactivate it first before being able to instal on my new computer. Normally you'd do this yourself but i can't get into my old computers at all.
how on earth do i get to speak to a repHere is a direct link to chat or phone support: https://helpx.adobe.com/contact.html?step=CCSN_adobe-id-signing-in_stillNeedHelp
Benjamin -
How to hide "keyword collection assigned clips" on the event
I have assigned a keyword to some clips so now they are assigned to keyword collection. But they are visible also on the main event. Now I have to import other clips on the same event and then assign them to another keyword collection. Is there a way to hide the "already assigned" clips so to view only the new ones on the event?
Maybe you are looking for
-
Valuated issued value Stock I want to check the values of BW & r/3 are matching for KF Valuated issued value Stock in which t-c0de can i check it I am checking valuated stock value in mc.5 & valuated stock received value in table s031 these values
-
Color correction applied to multiple clips
When using FCPX, is there a way to apply a color adjustments to all the fragments of the same clip? Or is there a way to batch edit clips without actually having to do all your color correction before editing?
-
I know that it is possible to attacht documents to inspection lots, inspection methods and codes of qualitative insp. char. But is it possible to attach documents (PDFs, images, etc.) directly to MICs to make clear what is meant by the inspection cha
-
My iphone 4 started shoing 2554 BE, no relief from sync or of on auto
I just chaged the calander Gragerian from Budhist!! Done it. Thanks
-
Hi there,I has=ve some albums that have more than one cd which is common especially those collection album but normally those cd is stated XXXX[cd1]or XXXX[cd2] my question is my album the cd they both have their own name eg in same album 1st cd is X