Code a bare de type 128

Bonjour
j'ai des problèmes lors de la lecture des code à barres de types 128 je suis parvenu à lire des codes de types EAN13 cependant en passant à des codes de types 128 mon VI n'est pas parvenu à lire le code (j'ai bien sur changé le type de code dans IMAQ read code et adapté la nouvelle ROI)
j'attache là mon vi
De quoi ce problème parvient -il à votre avis?
merci d'avance
Pièces jointes :
code a barre image fixes.vi ‏37 KB

Bonjour Bou6,
Merci d'avoir posté sur le forum de National Instruments France.
Je suis heureux de voir que votre premier problème est résolu. Si tout est OK, pourriez vous mettre votre post du 04/08 comme résolu? Merci d'avance.
Venons en à votre problème, votre ROI est normalement plus compliqué à décrypter en EAN 13 qu'en 128 donc vous avez fait le plus dur.
Voici des petites questions pour être sur d'avoir cerné votre problème:
              - Quelle type de réponse obtenez vous après traitement?
              - Est-ce proche de la réalité?
              - Avez vous bien mis le Barcode Type: Code 128 à l'entrée de votre VI IMAQ read barcode?
              - Pourquoi ne mettez vous pas une commande plutôt qu'une constante (voir dans le VI ci joint)?
            - Pourriez vous éventuellement faire une capture d'écran sur le traitement d'un code 128 pour que nous puissions voir là ou le bât blesse?
Très Cordialement
P. Denis
National Instruments
Pierre_D
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014
Pièces jointes :
code a barre image fixes type 128.zip ‏28 KB

Similar Messages

HT4113 My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason

My daughters iPod touch asks for her pass code but when she types it in the cursor does not move or input any characters so,she cannot get into the iPod. This has suddenly happened for no apparent reason, what can we do? Can anyone help please?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

Hi,
Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
While recording the fileds, system giving a message of Code Block.
Please let us know about Code Block while uploading the Initial Stock.
Thanks
Siddu.

Check this thread
[Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
thanks
G. Lakshmipathi

How to default Particular G/L code in Particular Doc Type in PO

I want to default Particular G/L code for a Particular P.O Doc type with item category as "K" .
I do not want to Link G/L code to a Cost Center But want to default particular G/L code ithat particular Doc Type which is a po with Item Category as "K"
We do not want to attach any G/L code to any cost center.
The defaulted G/L code should not be cahnged by User thats the requirement.
Can someone help me out
Umesh Bagul

hi
in OKB9 give default Gl for the cost center
then make the gl field as display in PO field selection
but the doc type wise GL is not possible
try with some user exit
regards
kunal
Edited by: Kunal Ingale on Jan 20, 2011 11:09 AM

MIGO T code for 453 Movement type

hi sap gurus,
I am getting These error message when i am using MIGO T code for 453 Movement type
Deficit of BA Ret.blocked prev. 104 EA : NTH-607-P5G 1034 3401 5786051

This means your stock level in return blocked stock is not sufficientt to be able to carry out the goods movement. Check your stock level for your material in MARD-RETME (or in MB52).
Mvt 453 means stock transfer from return blocked stock (that was sent back by customer) to your own stock. Return blocked stock is owned by the customer, through this goods movement you take over the ownership of the goods.
Regards,
Csaba

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:     InPageError   Error Status Code:     c0000185   Faulting Media Type:     00000003   OS Version:     6.1.7601.2.1.0.768.3. Any clue why or how

I downloaded the latest version and I get this error when I open it. Problem signature:   Problem Event Name:
InPageError   Error Status Code:
c0000185   Faulting Media Type:
00000003   OS Version:
6.1.7601.2.1.0.768.3. Any clue why or how to fix?

InPageError
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get itunes to launch properly afterwards?

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it does'nt work there . Means the page is not navigating towards the address. Kindly solve the problem

In the address bar where type the address of the web site at the top. after entering the address i press enter key from the keyboard but it doesn't work there . Means the page is not navigating towards the address. Kindly solve the problem

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Job code mapping with activity type

Hi friends,
I want to map the Job code to an Activity type.
Pls let me know the table name for job code to activity type mapping or through which transaction, this is done.

Hi Dilek,
thanks for the reply.
Basically I am working in PS.
I have a case whr when user is entering timesheet, he gets an error message, create a master record for 158312/DEF.
for this, basically we have to maintain rates in KP26 for Cost Center and act type.
If I check the PA20 record for teh user, he is assigned to
Cost Ctr: 158312
Job key: 30020, and
Activity Type: DEF
Here when I contacted with the planning dept to maintain rates for 158312/DEF, they told me that they use activity type DEF as the default and they never maintain rates for this. they told me taht Basically the job code is not mapped to an activity type, the only way we would know what the problem is, is to check the infotype 1 and 315 and the job code to activity type mapping table.
So I just checked with you guys to know which table they are referring too..
regards,
Madhu

Real code analyze bar in code editor

Hello all,
I talked with one of developer download the JDev, he told me that he saw a real code analyzing bar in code editor, somehow, it went away, he could not find that anymore, and he think that is great feature.
Any one have seen it? Do you know how to set that up?
Thanks.
Yanlong Sun

Yanlong Sun,
Please explain what a "real code analyzing bar in the code editor" is.
andy
JDev team

Invalid return code of process [bootstrap] (exitcode = 128)

Hi all,
I get the following message when starting my dialog instance:
ERROR => invalid return code of process [bootstrap] (exitcode = 128) [jstartxx.c 1642]
JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 128)
JControlCloseProgram: started (exitcode = 128)
JControlCloseProgram: good bye... (exitcode = 128)
The central instance starts without problems. But the central instance is running
on an other server (physically) than my dialog instance.
Does some know the error code 128, ic cannot find any information about that error code in other threads.
Really thanks for helping me...
Steve

Hi Nor Azly Mohd Nor,
I have the same problem... not exactly because my dev_jcontrol log have the following error...
it´s approximately but my error said, as you see next, exitcode = 66 and not 128 as such error that was report...
Fri Dec 05 10:56:59 2008
*** ERROR => invalid return code of process (exitcode = 66)
JControlExecuteBootstrap: error executing bootstrap node (rc = 66)
JControlCloseProgram: started (exitcode = 66)
JControlCloseProgram: good bye... (exitcode = 66)
You told in your last post that you have the correction for the error reported... "If the issue is not solve, I might have the solution for you."
Would you mind to tell me what your sugestion by solve this problem??
Best regards,
Thanks in advance,
Joao Dimas

BAPI for T.cod-MB11 using movement type 631

Hi Friends,
                 what BAPI can be used for T.code-MB11 with movement type 631. Need your help.
Regards
preet

Hi,
BAPI_GOODSMVT_CANCEL           Reverse Goods Movements with MB_CANCEL_GOODS_MOVEMENT
BAPI_GOODSMVT_CREATE           Post goods movements with MB_CREATE_GOODS_MOVEMENT
BAPI_GOODSMVT_GETDETAIL        Display Details for Material Document
BAPI_GOODSMVT_GETITEMS         Display Detailed List of Material Documents

What does AHT error code 4SNS/1/40000000:TB1T-128.000 mean?

My MacBook froze on me last night while running Firefox w/ 4 windows open, each with 6 or more tabs. Seemed partly due to using the instant message ap on Facebook. The machine forze with the beach ball spinning it's heart out. Shut it down, restarted, and got a freeze during start up. Tried again this morning and the machine seemed to run ok for a session, after which I closed the lid without shutting down. After opeing the lid, the machine ran ok, then slow, then froze. I eliminated peripheral problems, eliminated software problems, then ran an Apple Hardware Test.
It produced the code: 4SNS/1/40000000:TB1T-128.00
This code does not show up in Google or this forum. Any idea what it means or where I may find out what it means? It's a late 2008 MacBook, so no warranty whatsoever.
Thanks in advance for any help!
Kermit

I ran the hardware test on my MacBook unibody and got the same result. Did you ever get an answer as to what this code means? I haven't been able to Google it either.

List of codes under various catalog types

Hi All,
I want an illustrative / sample list of various codes under following catalog types applicable for QM notifications which is relevent for a industry involved in trading and servicing of medical equipment.
Can anybody please provide me the same ?
1) Coding
2) Defect location
3) Defects
4) Causes
5) Tasks
6) Activities
Regards,
MHP

1) Coding -
If you are measuring color of the material then you can create "COLOR" as code group and under this code gp you can create diff code as required, example;
001 - white
002 - black
003 - red
004 - yellow etc...Same way you can create diff code grp and code combination.
2) Defect location -
If you are inspecting material at diff location then you can create diff code for each location
001 - QC lab
002 - QA lab
003 - Electrical lab...etc..
3) Defects -
Here for each defect you Crete one new code..
001 - Color is not good
002 - Cert missing
003 - Out of spec...etc..
To create all different codes for diff activity first you need understand you business process and try to map those business process steps with creating code and map to process.
hope this helps to understand.

Barcode Type 128 Mode C

Hi,
I have to create a barcode in type 128 with mode C to be printed via smartforms.
But when I create the new barcode in TA SE73, I can only use A, N, U. So how can I
create a barcode with Mode C? What is the meening of A, N and U?
Thank you!

Hi Michael,
I have exactly the same problem. Did you already find a suitable solution ?
Thanks,
Roque.

Check status bar message type

Hi All,
Are there any function module or method that could use to check what message type (I,S etc) are prompting on the status bar?
Thanks.

Hi,
If i understand you requirement correctly, you have made some customization to a standard program's PBO/PAI. This customization updates some Z Tables. Now the flow is such that your customization executes before Standard program has completed its validations and there is a possibility that an error might be thrown later in the program validation and in such cases you do not want your changes to be committed to the Z tables.
If my understanding is correct, i can think of below solutions.
1) Since you are customizing the standard code, look for a EXIT/BADI which get triggered on SAVE and add your code here.
If you have tried this already and didn't find a suitable enhancement, then try with the below solution.
Create an FM with the processing type as an "Update Module" (attribute tab of the FM in SE37), and pass the data that needs updated in the Z table to this FM, inside this FM you can have your custom validations and code to update the Z table.
Now call this FM "CALL "FM" IN UPDATE TASK" in the PBO/PAI of your customization.
With this what you will achieve is that, the update modules will be called only if the original transaction was committed successfully.
Regards,
Chen
Edited by: Chen K V on Jun 3, 2011 12:59 PM

Code a bare de type 128

Similar Messages

Maybe you are looking for