Code Completion does not show the Class I want

Hello!
I try to get familiar with JDeveloper 10.1.3.
I have a simple project with an external Jar file.
In this project I am using the swing file-chooser dialog. So I want to use a FileFilter to let the user choose only one type of file.
At least there are three FileFilter:
1. java.io
2. javax.swing.filechooser (<- this is the one I want)
3. com.ibm.as400.vaccess.FileFilter
When i type FileFi the code insight is positioned on Float.
The little window mentions alt-enter to get the 3rd choice (ibm FileFilter)
So, do we have a bug, or is it just a config problem or do i want to much?
With kind regards
Joerg Fechner

Hi,
The javax.swing.filechooser.FileFilter class is an abstract class. Though JDeveloper imports the class for you, it cannot be instantiated. E.g.
jfc.setFileFilter(new FileFilter());
doesn't work because you cannot instantiate an abstract class. JDeveloper will show this file as underlined in red to indicate this.
When importcing classes through pressing alt+Enter, a dilaog shows up that you select the wanted import through the arrow - down or - up key. Press Enter to confirm the selected choice
Frank

Similar Messages

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

HT4972 i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help

Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE.

InsertRow does not show the inserted row on the view

hello:
The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
ViewObject myVO = this.getMyView();
Row newRow = myVO.createRow();
newRow.setAttribute("Id", myId);
myO.insertRow(newRow);
Thanks

Hi,
I also have problems with code above for inserting a new row.
When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
Something weird is happening here...
Please help.

My homepage does not show the latest page when I open Firefox

I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.

'''''Has the site worked normally in Firefox before?'''''
When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help?

Error : the class does not match the class of the persisted object

Hi I am new to Java.. I got an exception "the class does not match the class of the persisted object for cl = java.util.Vector : __SUID = -2767605614048989439, getSUID(cl) = 1".. What it implies? I got Serialized stream and Object from Web Server.. How to resolve this Exception? I nead to Deserialize this stream...

ArulPrabhu wrote:
Friend... I agree with u... Every thing Ok... I am not having the option to make change on the server side... I call a webrequest for the URI - "http://www.nseindia.com/chartdata?mkttype=N&series=EQ&symbol=RPOWER&charttype=ONLINE_STOCK".. From that i got response as Serialized Object Stream... Which is the data made available to all through their applet "Chart".. But i need it for my Custom Project.. I know the Structure of class they have serialized... Is their any chance to parce Data from that Stream..
Three words.
You are doomed.
Whatever you end up doing will not be serialization. It will be reverse engineering of a old (dead) format that could go all pear shaped on you when you least expect it. One of the worst problems in using a solution where you reverse engineer, try and guess hackery your way through a proprietary semi (or totally) undocumented format is that it is really impossible to test your code with any degree of certainty. Does your code actually work? Or does it only work because you haven't seen some totally unexpected (but legal for the format) format yet?
Get the producer to produce XML instead of "serialized" data. This is a much better route for you to go down.
If you decide to keep on your path then grab a DataInputStream and go somewhere else because you'll have to figure out the format of another languages serialized data on a place that isn't this site.

When bookmarking it does not show the list of folders that I have in bookmarks to place new bookmark into. I reset firefox

When bookmarking it does not show the list of folders that I have in bookmarks to place new bookmark into. I reset firefox and still have the bookmarks from the bookmark tab, Just bookmarking new ones the folders do not appear to place new bookmarks in, only a few folders show

Click the arrow at the far right (outside) of the Folder field (i.e. not the one in the Folder field) in the "Edit This Bookmark" window to access the complete folder list.<br />
This full folder list also opens if you click the drop marker in the Folder field and click the "Choose..." item.<br />
If folders in the list aren't expanded then look for a possibly faint arrow icon to expand/open the folders.
*https://support.mozilla.org/kb/how-do-i-use-bookmarks

I can not read my mails on my email screen. It does not show the messagew

Although te massages are showen in brief at hè leeft, the screen does not show THE whole message,

Try closing the Mail app completely and see if the email text shows when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT4623 my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?

my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?

If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

Report does not show the main section while calling from forms 6i

Hi
I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
But when i run the same report independantly from report builder it show the both header and main section with relevent data.
pl solve the matter
thanks in advance

can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Code Completion does not show the Class I want

Similar Messages

Maybe you are looking for