Code for 8831 Conference Phone

Are the COP files and code available for the new 8831 Conference Phone for Call Manager 8.5?
I can't find them on the download site.

Hi Troy,
Here's the path
Downloads Home
Products
Unified Communications
Call Control
Cisco Unified Communications Manager (CallManager)
Cisco Unified Communications Manager Version 8.5
Unified Communications Manager/CallManager Device Packages-8.5(1.17115)
Cheers!
Rob
"When it comes to luck you make your own  " 
- Springsteen

Similar Messages

  • DTMF Digits Dialing issue on 8831 Conference Phone

    Hi,
    anyone had a DTMF digits dialing issue on Cisco 8831 conference phone. If I have to join any external conference bridge, when I trying dial my user id and  password its not sending the digit i am dialing. Conference bridge is saying wrong PIN dialed.Please suggest

    Hi
    Actually this problem was on SIP call,User was dialing shortcode and it was going through their SIP trunk, raised case with TAC and they replied "its expected behavior and documented in the release guides, we do not find any defects filed to fix this. we are hoping, this behavioral change would be included in the future releases"
    version of call manager  9.1.2.11900-12
    current firmware running on the phone-SIP 9.3.3.5

  • I want unlock code for my i phone 4

    hi
    i just want to unlock my phone

    There is no such thing as an unlock code for an iPhone. Only the carrier it is locked to can authorize unlocking it, which is done by restoring the phone using iTunes after the request is approved.
    Contact the carrier it's locked to.

  • Can I get a PAC code for my daughters phone? It's PAYG

    How do I get a PAC code for my daughters PAYG phone? Not sure if we registered the phone or not.Thanks

    You need to call customer services or login to the online account that you have for his device.

  • HT4061 I downloaded  IOS7 on My Iphone5 and put in a 4 digit lock code for find my phone but My phone wont Accept it. It wont let me restore/backup.

    I put in My IMEI code and ICLOUD tells me THAT THE product has been replaced. I am doing This to TRY TO ACTIVATE MY IPHONE5 AS it wont Accept My 4 digit code after downloading IOS7
    So My phone in disabaled, wont let me backup,restore kos FIND MY PHONE IS TURNED ON! How Canon i turn it on if phone is disabaled and computer wont recognise phone kos its locked and if i reboot it it demands i enter code (how Can i, phone,computer wont Accept) TALK ABOUT BANGING MY HEAD AGAINST A WALL, ALL I WANT IS TO USE MY PHONE . APPLE INTRODUCE NEWS SUPER SYSTEM, BETTER THIS, BETTER THAT, HA. IVE SPENT ALL YESTERDAY AND STILL TRYING TO RESOLVE THIS, LET ALONE MAKE A SIMPLE PHONE CALL!
    HELP ME SOMEONE PLEASE ,PLEASE

    You can't restore a backup to a phone that is running a version of iOS earlier than the version running when the backup was made.  Normaly this situation occurs when replacing a phone, and the eplacement OS is not up to date.  The fix is to update the replacement phone, then restore from the backup.
    You could try an older backup made with iOS6.
    Anyway, why do you need all your info on it while the screen is being fixed?

  • Forced Authorization Code For Cisco SIP Phone 3905

    Hi Team,
    Can i configure  Cisco SIP Phone 3905 to use Forced Authorization Code ? I am using Call Manager 9.X.
    Regards,
    Praful Sartape

    Hi Praful,
    Yes you right for CME but for CUCM some sip phones supports FAC , as far as 3905 is concerned it supports FAC .
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/3905/8_6/english/admin_guide/IP05_BK_CDEEDD7F_00_admin-guide-3905_chapter_0101.html#IP05_RF_A5029279_00
    I didnt find link for CUCM 9.x but that above link will help.
    And also check this thread- https://supportforums.cisco.com/thread/2125452
    Rate all the helpful post.
    Thanks
    Manish

  • Security code for sms

    Hi this is Zeeshan
    i recently purchased Nokia X2-01 phone, its a wonderful phone.
    But I am having one issue with this phone, there is no such function to create security code to read an unread sms, any unauthorised person can have access to my privates sms
    plz anybody help
    plz guide me how create security codes to read sms
    Solved!
    Go to Solution.

    I suppose you just have to use a security/lock code for the whole phone (all access to the phone), if there is no built-in feature specifically for SMS.
    As the model is based on Series 40, there is no way an app developer could develop an app for that, either (Java or Flash Lite does not give such control, and those are - besides web apps - the only kind of apps that the phone supports).

  • FAC support for Linksys SPA962 phones.

    Hi
    We are running CUCM version 9.1 and few linksys phones are registered to this CUCM
    Is it possible to configure FAC code for these linksys phones.
    So that before dialing international call, FAC code is required.
    Is these phones are supported cisco CUCM FAC features ? Is it configurable ?
    Rgds
    Rajesh Kumar

    Rajesh,
    Early media just means it can support a 180 Ringing or 183 Session Progress with SDP in order to establish a media connection prior to the call connect for things such as ringback and playing tones for FAC and such.  What did you see in the CallManager traces for the call?  Can you pull out all the SIP messaging for a test FAC call or just attach a packet capture from the phone?
    Thanks,
    Brian

  • How to cancel conference phone 8831 linked mode

    I used two conference phones 8831 to setup  linked mode in one big  meeting room  for testing last month. 
    Now I installed one of them in another small meeting for testing.
    the keypad unit screen show me that it trying to config link mode.
    I tried to erase the phone setting, but it still occurred....
    Does anyone can tell me how to fix this problem? thanks. 

    Hi Alex,
    Please move this to IP telephony Community to get experts in 8831 phones to help you. This community is for Cisco WebEx Meetings Server and Cisco Unified MeetingPlace products.
    Kind regards,
    -Dejan

  • Conference Phone 8831 with 7.1(3)

    Hi,
    Is there anyway to add Conference Phone 8831 to CUCM 7.1.3?
    in datasheets it is only for CUCM 7.1.5+,

    It depends on what CUCM you running whether it is restricted or unrestricted, you can find it with the help of below link. If CUCM is installed as restricted then you must go for restricted version (UCSInstall_UCOS_7.1.5.35901-1.sgn.iso) only.
    https://supportforums.cisco.com/discussion/12079741/how-find-installed-cucm-iso-restricted-or-unrestricted
    If you plan well, then it is not a difficult activity its like device pack installation just you need to switch the version after new iso installation and you dont need to reconfigure anything except frimware; if you dont want to update the firmwares then you can revert back the firmware names in device default.
    Suresh

  • HT5047 I've just downloaded ver 7 operating software AND ENTERED A SECURE CODE FOR THE PHONE NOW I CAN"T USE IT TO OPEN  A MESSAGE FROM FACE BOOK

    I just downloaded 0s 7 ser a code for security and when i recieved a nessage from facebook and was asked to enter the code it would:nt work and finally locked my phone. Help!!

    Reinstall Safari 5.1.1
    If that doesn't help install the Mac OS X 10.6.8 Update Combo. It's ok to do this even though you are already running v10.6.8.
    Restart your Mac after installing software.

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

    I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

    I found this in the iCloud Keychain FAQs:
    How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
    If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
    - Your iCloud Security Code
    - The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
    - If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
    So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

  • Dynamic Dropdown for Country can Phone Code

    Hi,
    Can anyone show me how to create a Dynamic List for Country and Phone Code. Select a country from dropdown menu and it reloads the page to show the coutry phone code in a text field.
    Example:
    -- It shows a list of country
    -- When a country is selected, it populate the selected country phone code to a text box on the same page.
    Let say, Choose UK country and it auto populate the Phone Code "44" to the text field box on the same page.
    Please advice.
    Thank you

    I exactly know the solution you need.
    But please dont forget to award me the 4 duke dollars if you are satisfied with my solution.
    The solution:
    <select size="1" name="country" onChange="myFunc()">
    <option value="">Please select ..</option>
    <option value="0001$91">India</option>
    <option value="0002$81">Japan</option>
    <option value="0003$44">UK</option>
    </select>
    <p><input type="text" name="myTextField" size="5"></p>
    <script>
    function myFunc()
    var ind =document.forms[0].country.selectedIndex;
    if(ind!= -1)
    var phoneCd = document.forms[0].country[ind].value.substring(5);
    alert(phoneCd );
         document.forms[0].myTextField.value=phoneCd
    else
    document.forms[0].myTextField.value="";
    //alert("my 4 duke dollars pls ;-)");
    </script>
    As you can see in the above dropdown menu "country" that I have defined the phone code in the value after the "$" symbol.
    Simply substring the portion after the $ symbol and you get the phone code.
    Lemme know if this helps ..
    -Rohit
    Message was edited by:
    RohitKumar

  • What is the country code for my Apple ID phone number? Normal att phone in austin tx

    what is the country code for my Apple ID phone number? Normal att phone in Austin Texas

    I hear you. I put a "1", & it won't accept that. Just keeps coming back w/ "Please specify a valid mobile phone number". I tried to put a "+" in front of the "1", but it won't take that @ all...

Maybe you are looking for