Code for a combination lock
Can anyone please help me. I am doing a Java project and need to design a combination lock using 3 classes. The lock must use letters and only allow the user to make 3 attempts.
Please can somebody help
Thank You
no time for funny people mate.I've got plenty of time, and I would like to encourage others to write more funny shit.
i'm being serious.And don't call me Shirley?
I dont have a clue on java and we seriously need help.Help? Nah, you've figured out a fine way to go through life: pay other people to do the stuff that you should be doing for yourself. You'll be fine.
this will prob take 10 mins for you java experts. If
you can help please do, if not then know one wants to
hear you comments.I know one who wants to hear some comments
thank YouShag off, beeotch.
Similar Messages
-
HT201365 What if I forget the code for the activation lock?
I found my iphone after a few days of losing it and I had put the activation code on it. I forgot what it was and I can't unlock it
Welcome to the Apple Community SezHuOne.
If you mean you locked it, you just need to enter your screen lock code, the one you have always used to unlock it after it' seen left a while. -
Windows code for Ctrl+Q in Oracle Terminal
Hello!
We use Forms6i and Windows 95 OS and
in our forms people usually use CapsLock
to type info in upper case and some times
they can't use Exit button (Ctrl+q) because of this. That is why we would like to create
another one Key Binding Definition in Oracle Terminal with Action "Exit" and Binding
"Contol+Q". Did anybody try to define repeated Actions? Is it possible? And,
actually, the main quesion is - where can we
find windows codes for different combinations of keys?
Any help will be greatly appreciated!
Thank you in advance,
Andrew.Andrew,
You don't need any window codes to do this.
Just do the following:
a) run Oracle Terminal (you'll have to do a Custom Install if you don't have it installed.
b) open %ORACLE_HOME%\forms60\fmrusw.res
c) Choose Functions->Edit Keys.
d) Doubleclick the "Runform" circle.
e) Click in the "Exit" line.
f) Click the "Duplicate Row" button.
g) Change Control+q to Control+Q.
h) Ok, OK, Functions->Generate.
i) File->Save, File->Exit.
And if you were running Forms6i on the Web, it would be much simpler (the res file for Web is an ascii file).
Hope this helps,
Pedro -
Tax code for service tax in shipment Cost document
Hi,
Can someone pls. tell me that do we need to create Tax Codes for Service tax, edu Cess and secondary & higher edu cess for Shipment cost doc?
If yes pls. explain the config in detail.
Regards
AbhilashDear Abhilash
Tax codes can be classified into two types, viz. Output Tax and Input Tax.
Output tax can be assigned to all sales related activities whereas, input tax can be assigned to all MM related activities.
To maintain these tax codes, go to <b>FTXP</b> and maintain tax codes for the combination of country and tax code.
Thanks
G. Lakshmipathi -
What is the bypass code for lock screen
what is the bypass code for the lock screen on i pod touch
To restore the iPod to get rid of the lock combination you forgot, just follow these steps....
1) Plug your iPod into the PC
2) Wait for iTunes to sync your device like normal and let it back up all of your stuff, since restoring deletes all of your data
3) Go onto your iPod's menu (The one that shows the memory bar at the bottom)
4) Locate the Restore button on the screen and click restore
5) If your not on iOS 5.0.1 yet, it will ask you to download the latest firmware, go ahead download it
6) When it is done downloading it will take you through the restoration process.
7) When it asks you if you want to restore it from a backup or set up as new when everything is finished, make sure you select "Back up as new"!!!
8) Re-Sync your music, apps, photos, mail, contacts, etc. and anything you had before, and you device is just like new. -
HELP ME PLEASE MY MAC IS ASKING FOR A SYSTEM LOCK PIN CODE AND I NEVER SET ONE HELPHELP HELP
ok so i tried enabling iCloud/Find my mac onto my macbook pro,and it restarted to finalise the process,but when it started back up its asked me for a system lock pin code,though i never set one???? please help omg im crying
Here's my guide: How to: Unlock System Lock PIN Code
-
My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!
If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig -
What is the Pin Code for unlock for Macbook Air System Lock ?
What is the Pin Code for unlock for Macbook Air System Lock ?
It usually means that the owner of the device sent a directive through icloud(find my mac), to lock the device because it has been stolen.
The only means to unlock the device is to have Apple (Apple Store) unlock it for the owner. If you are the owner, be prepared to show proof of legitimate ownership. It is likely that Apple will want to contact the registered owner to make sure that the device has been legitmately transferred.
I'm really thinking you may have bought stolen property. Ask the seller why it is locked, and if the device is registered to him/her, to release the registration on Apple's website. Only then, will you be able to re-register the device in YOUR name. -
What is the screen lock default code for iPod nano 5th gen?
What is the screen lock default code for iPod nano 5th gen?
There isn't one. You'll need to connect the Nano to your iTunes library and restore to factory settings. There is no other way.
B-rock -
Forgot my lock code for my iphone4
I have changed my lock code for my iphone4 and now I don't remember it, I don't want to looose all my data.
if you mean the passcode
http://support.apple.com/kb/ht1212 -
Iforgot my lock code for my iphone5
i forgot my lock code for my iphone5
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New.
If you are restoring to fix a forgotten Restrictions Code, then skip Step 9 and restore as New. -
Does the lock code for my iPad covered by my warranty?
Does the lock code for my iPad covered by my warranty?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
i forgot my lock code for 6220c? how can i unlock it? oh, please help...
If you haven't changed then its 12345 by default. If you have done so then you will have to go to nokia care point. They will do it for you, but may charge you for that. Also take purchase proof along with you.
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N? -
I have set up as security password-code for home screen. So when I turn it on, I forgotten the correct code and I'm locked out for 60 minutes ;( How do I retrieve or reset so I can use phone again. Please help!
You need to connect to iTunes and restore the iPhone to remove the passcode...then from a recent backup restore the content.
-
HT1414 forgot screen lock code for 3gs, how can i reset
cant remember pass code for 3gs, says connect to itunes, when i do it ask me for code, dont have cmputer,using one at work
http://support.apple.com/kb/HT1212
Maybe you are looking for
-
Which version of PS and AI are okay to use?
Can I use PS and AI from Creative Suite 3 to import into FC4? Sorry if this is a dumb question, I a novice.
-
HP Photosmart 6510 not printing black after cartridge cchange
I see the issue of not being able to print in black after a black cartridge change is not new. This is not the first time I have change the black cartridge but it is the first time I had this issue arise. I have followed the various peices of advic
-
Creation of Material Master for a material with Material Type NLAG
Hello Sirs, I have to create a material which will be consumed directly. I would use the material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the pric
-
How can i set "Createdby" attribute When using Custom JheadStart Security
Hello We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object? thanks
-
For iCloud Pages, is there any way to leave a margin comment?
I really need this feature when collaborating on a document. I can't seem to find out how to do it. If it is not yet available, any idea of a good work-around?