Code for out/incoming call

Dear all,
Now I used Nokia N95 and I want to know the way that I can see the duration and number of incoming call and outgoing call in my phone. Before I used call log but after I change the Sim Card the information were deleted so how could I know it please help because I have to check the report comparing to my bills. Please give me any code for checking.
Thanks.
Issarariddhi,

21-Aug-200707:32 AM
issarariddhi wrote:
Dear all,
Now I used Nokia N95 and I want to know the way that I can see the duration and number of incoming call and outgoing call in my phone. Before I used call log but after I change the Sim Card the information were deleted so how could I know it please help because I have to check the report comparing to my bills. Please give me any code for checking.
Thanks.
Issarariddhi,
Try Menu > Log > Press Right Arrow and a 30 day log of all calls, SMS's and Packet data is kept

Similar Messages

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Why the 'decline' option not present in the lock screen for an incoming call in ios7?

Why is there no call decline option on the lock screen for an incoming call in IOS7??

Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
WTH, is my phone the only thing in the world, I could be busy with to decline??

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a big photo for an incoming call?? I have installed iOS 7.1.1

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a great big photo for an incoming call?? I have installed ios 7.1.1

Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
http://www.apple.com/feedback/iphone.html

I am having problem for my incoming call while accessing in GPRS or WIFI with my iphone 3g so plz help

I am having regular problem with my iphone i am not able to get my incoming call while i am surffing on my iphone 3g, if sum one call me he get the message that the person u r calling is out of coverage area.
And after completing my work on iphone i have to every time reset network in my iphone manually now its every day's problem, so if u have solution plz give me
THANKS.........

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

Jabber for iPhone, Incoming Calls go Missed Call

Incoming Calls on Jabber for iPhone, shows immediately as a missed Call.Has anyone had this issue? It is intermittent, and happens especially when the Mobile is locked.
Thanks,
HA

Hi Hamed, i have the same problem.
Do you still having the issue? any solution provided so far?
thanks.

Iphone 3GS keeps crashing and wont hang up after out & incoming calls after repairs

I have had my iphone 3GS back to vodafone after I could not make calls, kept saying call failed!. I did all the troubleshooting tips, was okay for a short time, then shortly started doing same thing.I took it back to the store and on that occasion the assistant took the phone out of the protective cover i always had it in to replace the simcard in case it was this that was causing the problem ,then he dropped it onto the shops wooden floor and it bounced, he picked it up & went bright red & kept apologising , I then said if I have any more problems with it then I will come back & see him & he said yes. Shortly after I noticed the sim cover on top of phone was missing but i could see the simcard inside, so I returned to the store & informed them of this, i was advised by the earlier assistant 'Craig' that he thought that the sim tray was underneath the simcard which he then removed the simcard, then advised me he didn't want to go poking about in it in case it was inside and he would send the phone to be repaired & gave me a replacement phone until mine was back. I waited approx 2 weeks before receiving a call from Vodafone saying they would repair it if I payed over £100! as it was not covered under my insurance, I informed them the assistant dropped the phone in store and then i noticed the problem & was then told they would investigate this and call back, 10 minutes later they called back to say it would be a free repair. Since the repair I have had nothing but trouble with the phone crashing when I access apps , sticking on the hangup screen with in & out going calls for approx 10 minutes or more, when I turn phone on the Apple logo stays on the screen for long periods off time. When I access my music the track will change part way through to another track & also sometimes refusing to charge. I am fed up with going back & forth to the store which is quite a distance from my home & the phone has more problems since it was ''dropped'' & then ''repaired'' & I am at a loss of what to do. I feel I have been treated unfairly and gone along with all Vodafone asked of me. Please could someone from Apple help me!!!

The steps you already took were the correct ones - reset, restore from backup, restore as new phone. You could always try them again, but a Restore with set up as new is the 'ulitmate' troubleshooter - if that doesn't correct the issue, it's usually time for a replacement phone. Unfortunately, you've learned a hard lesson there, although I don't see how Apple screwed you - it's no secret that the iPhone warranty is valid only in the country of original purchase (as a little research on your part would have shown).
See how much money you saved with your eBay purchase? Next time buy the phone from Apple or an authorized UK carrier.

Sample ABAP code for userexits, and calling bapi's

Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasad

hai ,
check this code...
*& Tables
tables : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
    where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
    select single * from tadir
       where pgmid    = 'R3TR'
         and object   = 'PROG'
         and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
      select single * from trdir
         where name = tstc-pgmna.
      if trdir-subc eq 'F'.
        select single * from tfdir
          where pname = tstc-pgmna.
        select single * from enlfdir
          where funcname = tfdir-funcname.
        select single * from tadir
          where pgmid    = 'R3TR'
            and object   = 'FUGR'
            and obj_name = enlfdir-area.
        move : tadir-devclass to v_devclass.
      endif.
    endif.
Find SAP Modifactions
    select * from tadir
      into table jtab
      where pgmid    = 'R3TR'
        and object   = 'SMOD'
        and devclass = v_devclass.
    select single * from tstct
      where sprsl eq sy-langu
        and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        select single * from modsapt
        where sprsl = sy-langu and
        name = jtab-obj_name.
        format color col_normal intensified off.
        write:/1 sy-vline,
        2 jtab-obj_name hotspot on,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      endloop.
      write:/(95) sy-uline.
      describe table jtab.
      skip.
      format color col_total intensified on.
      write:/ 'No of Exits:' , sy-tfill.
    else.
      format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
    endif.
else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

Tax Jurisdiction code for EDI Incoming invoice

Hi,
We have implemented EDI incoming invoice using INVOIC02. The process code is INVL.The invoice is to be posted against a Purchase Order line item. It is noticed that the EDI invoice is not getting the Tax Jurisdiction code from the Purchase Order line . Instead the Tax Juridiction code is copied from the company code. However when we post the invoice manually using MIRO , then the Tax Juridiction code is copied from the Purchase Order. We understand that the system should take the Tax Jurisdiction code from the Purchase Order even for EDI invoices. Is it compulsory that we have to use the user exit EXIT_SAPLMRMH_014 in order to populate the Tax Jurisdiction code field TXJCD from the Purchase Order line? or is there any config required to enable the transfer of Tax Juridication code from the Purchase Order? In transaction OBCE there is a config to transfer the tax jurisdiction code supplied by the external vendor. If we do not check that box , then system is supposed to get the tax jurisdiction code from the Purchase Order.
Thanks
Sukumar

The issue is resolved through OSS Note 506343. In the standard R/3 system, the tax jurisdiction code can't be written to invoice via EDI and only the Ship To Plant's Tax Jurisdiction Code is written to the invoice.
Regards
Sukumar

Sample java code for web service calling

Hello,
I need to call the web services for adding/updating records on Oracle On Demand Entities.
In particular i need a sample code in java language that explain how to append the sessionid
to the SOAP request when calling the web service.
thanks in advance.

Hi,
Each time you perform any SOD Operation after Login, ensure have your JSessionId attached to your actual Web Service URL like in example below
wsLocation ="https://secure-XXXXX.crmondemand.com/Services/Integration";
jsessionId="8d928e8330d53c6f954b16194731bad78f5f111c2043.e34PaxyNchuLe34Rax4SchaKchz0n6jAmljGr5XDqQLvpAe";
String url=wsLocation + ";jsessionid=" + jSessionId;
Use this url for all your future SOD Operation till you logout.
Regards
Deepak H Andeli

T code for Total incoming payment

Dear friends
I want to know the the Tcodes / menupath for the following reports.
1. The total incoming payment received from a particular e PAYER/Customer.
2. The total outstanding payment of a particular payer/ customer.( goods have been despatched and invoice has been raised but payment has not been made.)
Thanks & regards
debasish

Hi:
for Incoming Payment
Manually F-28 - Incoming Payments
Automatic payment Program - F110
For outstanding payment of a particular payer/ customer
Refer to T.code
FBL5N - Display/Change Line Items
Input customer account,Company code and select open items radio button.
You will able to see all the oustanding recievables or open items from customer.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Looking for an Incoming Call App

I am looking for an App simular to one I had on my Blackberry. When someone called in that was in my address book with a picture, the picture was the size of most of the screen. Does this exist for iPhone?

It's built-in to your phone.
To assign a photo to a contact:
Tap Contacts and choose a contact.
Tap Edit and tap Add Photo, or tap the existing photo.
Tap Take Photo to use the camera. Or tap Choose Existing Photo and choose a photo.
Drag and scale the photo as desired.
Tap Set Photo.
If you assign a photo using the phone, it will display full screen. If you assign a photo using your computer's address book, it will display as a thumbnail.

No Contact Names or Pics Showing for Incoming Calls?

I just got my phone yesterday. I have clean sync with my MacBook Pro. I thought that contact names should show for all incoming calls if that person and number are in my contacts. I also thought a photo would show if there was a photo in the contact as well.
???

I had a problem somewhat similar when I first bought my IPhone as well. My iPhone would show the numbers in international format with the 011 in front of all the numbers which made the contacts not show up when calls were incoming. I had to contact AT&T and spent 4 hours on the phone until someone actually figured out what was wrong and fixed it in less than 3 mins. It wasn't even the iPhone it had to do with the phone I previously had through Cingular/AT&T. The person said it was some sort of provisioning or something like that with some incorrect settings that screwed with the incoming calls only. This problem also would make the contact picture not show up as well for anyone in your list. This might help or maybe it won't. Good Luck figuring it all out. I still love my iPhone and haven't had too many problems with it

Hi guys please give me sample code for call transaction that handles error

hi guys, please give me sample code for call transaction that handles error,
please send me the sample code in which there should be all decleration part and everything, based on the sample code i will develop my code.
please do help me as it is urgent.
thanks and regards.
prasadnn.

Hi Prasad,
Check this code.
Source Code for BDC using Call Transaction
*Code used to create BDC
*& Report ZBDC_EXAMPLE                                                *
*& Example BDC program, which updates net price of item 00010 of a     *
*& particular Purchase order(EBELN).                                   *
REPORT ZBDC_EXAMPLE NO STANDARD PAGE HEADING
                      LINE-SIZE 132.
Data declaration
TABLES: ekko, ekpo.
TYPES: BEGIN OF t_ekko,
    ebeln TYPE ekko-ebeln,
    waers TYPE ekko-waers,
    netpr TYPE ekpo-netpr,
    err_msg(73) TYPE c,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko,
      it_error TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_error TYPE t_ekko,
      it_success TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_success TYPE t_ekko.
DATA: w_textout            LIKE t100-text.
DATA: gd_update TYPE i,
      gd_lines TYPE i.
*Used to store BDC data
DATA: BEGIN OF bdc_tab OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
*Used to stores error information from CALL TRANSACTION Function Module
DATA: BEGIN OF messtab OCCURS 0.
        INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
*Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
                                    TITLE text-001. "Purchase order Num
SELECT-OPTIONS: so_ebeln FOR ekko-ebeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME
                                    TITLE text-002. "New NETPR value
PARAMETERS: p_newpr(14)   TYPE c obligatory. "LIKE ekpo-netpr.
SELECTION-SCREEN END OF BLOCK block2.
*START-OF-SELECTION
START-OF-SELECTION.
Retrieve data from Purchase order table(EKKO)
SELECT ekkoebeln ekkowaers ekpo~netpr
    INTO TABLE it_ekko
    FROM ekko AS ekko INNER JOIN ekpo AS ekpo
      ON ekpoebeln EQ ekkoebeln
   WHERE ekko~ebeln IN so_ebeln AND
         ekpo~ebelp EQ '10'.
*END-OF-SELECTION
END-OF-SELECTION.
Check data has been retrieved ready for processing
DESCRIBE TABLE it_ekko LINES gd_lines.
IF gd_lines LE 0.
Display message if no data has been retrieved
    MESSAGE i003(zp) WITH 'No Records Found'(001).
    LEAVE TO SCREEN 0.
ELSE.
Update Customer master data (instalment text)
    LOOP AT it_ekko INTO wa_ekko.
      PERFORM bdc_update.
    ENDLOOP.
Display message confirming number of records updated
    IF gd_update GT 1.
      MESSAGE i003(zp) WITH gd_update 'Records updated'(002).
    ELSE.
      MESSAGE i003(zp) WITH gd_update 'Record updated'(003).
    ENDIF.
Display Success Report
Check Success table
    DESCRIBE TABLE it_success LINES gd_lines.
    IF gd_lines GT 0.
    Display result report column headings
      PERFORM display_column_headings.
    Display result report
      PERFORM display_report.
    ENDIF.
Display Error Report
Check errors table
    DESCRIBE TABLE it_error LINES gd_lines.
If errors exist then display errors report
    IF gd_lines GT 0.
    Display errors report
      PERFORM display_error_headings.
      PERFORM display_error_report.
    ENDIF.
ENDIF.
*&      Form DISPLAY_COLUMN_HEADINGS
      Display column headings
FORM display_column_headings.
WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
SKIP.
WRITE:2 'The following records updated successfully:'(013).
WRITE:/ sy-uline(42).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
          (10) 'Purchase Order'(004), sy-vline,
          (11) 'Old Netpr'(005), sy-vline,
          (11) 'New Netpr'(006), sy-vline.
WRITE:/ sy-uline(42).
ENDFORM.                    " DISPLAY_COLUMN_HEADINGS
*&      Form BDC_UPDATE
      Populate BDC table and call transaction ME22
FORM bdc_update.
PERFORM dynpro USING:
      'X'   'SAPMM06E'        '0105',
      ' '   'BDC_CURSOR'      'RM06E-BSTNR',
      ' '   'RM06E-BSTNR'     wa_ekko-ebeln,
      ' '   'BDC_OKCODE'      '/00',                      "OK code
      'X'   'SAPMM06E'        '0120',
      ' '   'BDC_CURSOR'      'EKPO-NETPR(01)',
      ' '   'EKPO-NETPR(01)' p_newpr,
      ' '   'BDC_OKCODE'      '=BU'.                      "OK code
Call transaction to update customer instalment text
CALL TRANSACTION 'ME22' USING bdc_tab MODE 'N' UPDATE 'S'
         MESSAGES INTO messtab.
Check if update was succesful
IF sy-subrc EQ 0.
    ADD 1 TO gd_update.
    APPEND wa_ekko TO it_success.
ELSE.
Retrieve error messages displayed during BDC update
    LOOP AT messtab WHERE msgtyp = 'E'.
    Builds actual message based on info returned from Call transaction
      CALL FUNCTION 'MESSAGE_TEXT_BUILD'
           EXPORTING
                msgid               = messtab-msgid
                msgnr               = messtab-msgnr
                msgv1               = messtab-msgv1
                msgv2               = messtab-msgv2
                msgv3               = messtab-msgv3
                msgv4               = messtab-msgv4
           IMPORTING
                message_text_output = w_textout.
    ENDLOOP.
Build error table ready for output
    wa_error = wa_ekko.
    wa_error-err_msg = w_textout.
    APPEND wa_error TO it_error.
    CLEAR: wa_error.
ENDIF.
Clear bdc date table
CLEAR: bdc_tab.
REFRESH: bdc_tab.
ENDFORM.                    " BDC_UPDATE
      FORM DYNPRO                                                   *
      stores values to bdc table                                    *
--> DYNBEGIN                                                      *
--> NAME                                                          *
--> VALUE                                                         *
FORM dynpro USING    dynbegin name value.
IF dynbegin = 'X'.
    CLEAR bdc_tab.
    MOVE: name TO bdc_tab-program,
           value TO bdc_tab-dynpro,
           'X' TO bdc_tab-dynbegin.
    APPEND bdc_tab.
ELSE.
    CLEAR bdc_tab.
    MOVE: name TO bdc_tab-fnam,
           value TO bdc_tab-fval.
    APPEND bdc_tab.
ENDIF.
ENDFORM.                               " DYNPRO
*&      Form DISPLAY_REPORT
      Display Report
FORM display_report.
FORMAT COLOR COL_NORMAL.
Loop at data table
LOOP AT it_success INTO wa_success.
    WRITE:/      sy-vline,
            (10) wa_success-ebeln, sy-vline,
            (11) wa_success-netpr CURRENCY wa_success-waers, sy-vline,
            (11) p_newpr, sy-vline.
    CLEAR: wa_success.
ENDLOOP.
WRITE:/ sy-uline(42).
REFRESH: it_success.
FORMAT COLOR COL_BACKGROUND.
ENDFORM.                    " DISPLAY_REPORT
*&      Form DISPLAY_ERROR_REPORT
      Display error report data
FORM display_error_report.
LOOP AT it_error INTO wa_error.
    WRITE:/      sy-vline,
            (10) wa_error-ebeln, sy-vline,
            (11) wa_error-netpr CURRENCY wa_error-waers, sy-vline,
            (73) wa_error-err_msg, sy-vline.
ENDLOOP.
WRITE:/ sy-uline(104).
REFRESH: it_error.
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form DISPLAY_ERROR_HEADINGS
      Display error report headings
FORM display_error_headings.
SKIP.
WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
SKIP.
WRITE:2 'The following records failed during update:'(008).
WRITE:/ sy-uline(104).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
          (10) 'Purchase Order'(009), sy-vline,
          (11) 'Netpr'(010), sy-vline,
          (73) 'Error Message'(012), sy-vline.
WRITE:/ sy-uline(104).
FORMAT COLOR COL_NORMAL.
ENDFORM.                    " DISPLAY_ERROR_HEADINGS
Hope this resolves your query.
Reward all the helpful answers.
Regards

Listening for incoming call or sms using midlet...

how to listen to an incoming call or sms using midlet/midp??
so, when there's an incoming call, that listener will invoke a midlet that will run as the display screen for the incoming call (like a wallpaper)...and after the call is finished/rejected, the midlet will be destroyed...
reply soon...i need this for my task...

Hi,
You can invoke the application through SMS and that also when the SMS are sent to the port the application has registered. As far as invloking the application on incoming call is concerned, I dont think j2me supports it. Try using push registry for autostarting the application through SMS.
Sunil

Code for out/incoming call

Similar Messages

Maybe you are looking for