Code for user-exit in VA01

Hi all!
I need help regarding coding for the following:
While creating sales order if the user repeates the same material no. again the system should give a warning. The warning should get triggered when user enters material no. , quantity and presses ENTER button .
Please tell me how to write the code for the same.
Thanks in advance.
Regards,
Pallavi.

User Exit is EXIT_SAPMV45A_005. Go to CMod, create a new project , under enhancement give V45A0004. In ZXVVAU11 ,
data: WA_VBAP TYPE VBAP,
lv_matnr type matnr,
      lv_matnr1 type matnr.
sort t_vbap by matnr.
IF sy-tcode = 'VA01'
AND ( sy-ucomm = 'SICH' ) .
loop at t_vbap INTO WA_VBAP.
    lv_matnr = t_vbap-matnr.
if lv_matnr = lv_matnr1.
message 'Material number duplicated ' with type 'E'. (Pass the material number as parameter in message, so user can know which material number got ).
else.
continue.
endif.
    lv_matnr1 =   lv_matnr.
clear lv_matnr,WA_VBAP.
           endloop.
endif.
Message was edited by:
        DEBOPRIYO MALLICK

Similar Messages

Code for user-exits

hey guys i want the code for user-exits for inclusion of Excise Chapter ID mandatory in PO .....
regards,
Naveen

which user exit u are using ?
check the BADI for the same .
SE15->Enhancements->BADI--->definations -
>search on Package = ME.
and see BADI definition called Process _cust.
Regards
Peram

Hi is there any code for user exits in bw

can you help me out with user exits in bw reporting pls
http://abapcode.blogspot.com

Hi Amit,
i have good document for user exits in bw. pls send me ur email i will send the document.
hope that will help you to resolve.
Reward pts if found usefull:)
Regards
Sathish

Dummy code for user exit in COPA

Hi,
Can anybody provide me with a dummy code for the above, the requirement is as under ;
While running profitability analysis report the system is valuating production and material cost even
against sales order which are purely rate variation debit notes. The valuation for production and material
cost in such cases should be nil.The rate variation sales orders have document type either as VI or VH
For this the relevant user exit is COPA0002 and the component is "EXIT_SAPLKEAB_004". What
source code do we have to write in the user exit to fulfill the above requirement and how do we activate
it?
Regards
Milind Nair

User Exit is EXIT_SAPMV45A_005. Go to CMod, create a new project , under enhancement give V45A0004. In ZXVVAU11 ,
data: WA_VBAP TYPE VBAP,
lv_matnr type matnr,
      lv_matnr1 type matnr.
sort t_vbap by matnr.
IF sy-tcode = 'VA01'
AND ( sy-ucomm = 'SICH' ) .
loop at t_vbap INTO WA_VBAP.
    lv_matnr = t_vbap-matnr.
if lv_matnr = lv_matnr1.
message 'Material number duplicated ' with type 'E'. (Pass the material number as parameter in message, so user can know which material number got ).
else.
continue.
endif.
    lv_matnr1 =   lv_matnr.
clear lv_matnr,WA_VBAP.
           endloop.
endif.
Message was edited by:
        DEBOPRIYO MALLICK

T code for User exits.

hai all MM gurus,
How to find out the user exits for any Tcodes or for any documents?.

for this there is a user written program called "zuserexit" which will be available. Run the program & give Tcode as input u ll get all exits for that.
http://www.sap-img.com/ab038.htm
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program

User exit in VA01 for changing the status profile

Hi Experts,
I want a user-exit in VA01 wherein i can change the status profile (Screen field name = JOSTD-STSMA ) based on some logic.
Thanks in Advance:-
Santosh

Hi, Santhosh,
You can use function module "STATUS_PROFILE_CHANGE"
see the code,
CALL FUNCTION 'STATUS_PROFILE_CHANGE'
EXPORTING
    OBJNR                          = XVBAK-OBJNR
    STSMA                          = G_STATUS
NO_CHECK                       =
EXCEPTIONS
   OBJECT_NOT_FOUND               = 1
   NO_STSMA_CHANGE_POSSIBLE       = 2
   STSMA_NOT_FOUND                = 3
   OTHERS                         = 4
where G_STATUS is your new status profile. It will update in your screen also.
Hope this will help u.

User-exit in VA01/VA02 to add order item and condition price

Hi experts,
   I have an urgent requirement to add an order item and pricing for VA01/VA02 when certain logic are met. Do you know a user-exit in VA01/VA02 to add sales order item and condition price for an order?
I am currently using user-exit USEREXIT_SAVE_DOCUMENT_PREPARE but I can only add the required order item to xvbap but I also need to add a condition code and condition price for the added item (in xkomv). Your response are very much appreciated.
Thanks in advance!

Hi Leo,
Check out few more exits:
Exit Name           Description
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001            Activating Sourcing Subitem Quantity Propagation
Reward points if this helps.
Manish

Value for user-exit variable is invalid

Hi Gurus,
My Value for a Fiscal Year Prd returns a invalid value for the 12th month of each year( for Example 12/2004, returns the error "Value 200313 for User-exit variable is invalid.
This is the code that is being used.
*Rolling 12 months for entered month
when 'ZCALM12'.
 clear: v_mth, v_yr.
 REFRESH E_T_RANGE.
 CLEAR L_S_RANGE.
 LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
 WHERE VNAM = 'ZCALMON'.
 exit.
 endloop.
 v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
 v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
 L_S_RANGE-SIGN = 'I'.
 L_S_RANGE-OPT = 'BT'.
 concatenate v_yr v_mth into L_S_RANGE-LOW.
 L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
 APPEND L_S_RANGE TO E_T_RANGE.
Thanks in Advance.

Hi Ravi,
when 'ZCALM12'.
clear: v_mth, v_yr.
REFRESH E_T_RANGE.
CLEAR L_S_RANGE.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCALMON'.
exit.
endloop.
-->> Here, you are not checking any thing. On which logic you are reducing year by one and increasing month by 1..?
v_yr = LOC_VAR_RANGE-LOW+0(4) - 1.
v_mth = LOC_VAR_RANGE-LOW+4(2) + 1.
-->>IF month is 200512 you will get output from above code is : please check.
v_yr = 2005 - 1 = 2004
v_mth = 12 +1 = 13.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
concatenate v_yr v_mth into L_S_RANGE-LOW.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
APPEND L_S_RANGE TO E_T_RANGE.
Try to debug the code by keeping break point after When. and execute the report, you will be debugging mode.
Hope it Helps
Srini

Abap code for sap exit variables?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Please tell how u solved ur issue i have the same scenario to be do.

ABAP Code for SAP exit varaibles?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen

Where do I get all SAP WM transaction codes for user acceptance test ?

Hello experts,
Where do I get all SAP WM transaction codes for user acceptance test during cutover activities?
I need the list of transactions.
Thanks in advance

Hi,
You can download through Solution Manager also. If ASAP is installed in your computer, you can download all the standard transactions, otherwise let me know your id, i will send it to you.
Aktar

Need help for user exit mereq001

Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data. Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.

biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar

Enhancement for user exit

hello
can you please let me the know the enhancement for user exit:exit_sapliqs0_001
regards
anik

Hi,
these are teh enhancements that r available...u need to check each of them.
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allo
IWOC0003 PM/SM authorization check of ref. object and planner gr
IWOC0004 Change single-level list editing PM/QM/SM ALV settings
Regards,
nagaraj

Help reqd for user exit

Hi all,
the requirement is...
In MIRO,the Incoimg invoice should not be posted without an empty field of amount(WRBTR) in the Basic Data.Currently as per std,it's not a mandatory field and can be posted by not entering any amount in that.So, either we have to make it as a mandatory field or should restrict not to saving the data if posting of empty field.(Not giving any amount)***seems,it tells the user to give the amount as mandatory.
How to do this.....if its coming under the USER Exit object...pls post both how to get the std program and enhancement assignment(it asks while creating user exit in CMOD) also for user exit.
thanks & regards
sankar.

hi
Program name is SAPLMR1M
For MIRO tcode, you have below user exits.
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
EXIT_SAPLMR1M_003 may useful to you. Check with this.
Reward if it dose
Thanks
Siva Kumar.

Authorisation roles and transaction codes for users(MTO--PPmodule)

Hi !!!
GURUS !!!!!!!!
I am working here on live project for make to order scenario.
We are using only batch management.
Could you give me transaction codes for users for authorisation roles.
All codes from start to end scenario.
Regards,
Nitin

Dear,
You have to do the JRM - Job role mapping. The list of transactions cannot be decided commonly across all implementations, as per your Business process definition you have to list the transactions invovlved and which business roles are required for that.
One example: PP_Planner is a Role, this is applicable for the planning person, he will be given transactions related to SOP, DM and MRP, he will not be given transactions related to SFC. Its vice versa for a operations person.
Thanks & Regards,
Vijaya Bhaskar A

Code for user-exit in VA01

Similar Messages

Maybe you are looking for