Code groups to a Catalog ?

Hi Friends
What is the maximun Number code groups that we can assign to a Catalog ?
Thanks in Advance
-MP

Hi,
I don't see any limitation on the number of code groups assigned to a catalog? Did you come across an issue in UI display for code groups?. Back end supports quite a number of code groups per catalog, though I don't have exact number
Regards,
Paul Kondaveeti

Similar Messages

CODE GROUP( Catalog Profile )

Hi Sapient,
Is it possible to assign more no. of code group with a single catalog type like damage ( Catalog type "C" ) for a single equipment only.If it is possible then can anyone tell me how to creat the same and display it.
Regards,
AR.
Edited by: Amit Rana on Apr 14, 2009 10:26 AM

Hi,
You can creat multiple code groups within same catalog.But when you define catalog profile for technical object you need to include all those code groups which you want to be available.If you want to include multiple then you need to put each code group against related catalog in catalog profile or add * for given catalog to include all code groups defined for damage catalog.
regds,
atul

SAP QM unable to pick Code group & code in creation of defect in QA32

Hi every one,
I am new to QM , can any one guide me to solve this issue.
In T code QA32 after results recording, am trying to maintain defect document of one of reject MIC. But, i am unable to pick Code group or code. System showing error "Code group QM-Q contradicts the code group of the catalog profile "
Regards
Srinivas

Hello Srinivas,
Check below path and let me know what settings you have maintained.
Now, Also check your Catalogs profile, You have to maintain Catalog "Z" for the same catalog profile.
Amol.

QS41 and QS51- code group error

Hi,
I am trying to create new code groups in QM. i have maintained the defect classes and the catalog types. then in QS41 I have maintained the code groups for the catalogs along with the codes. All the code groups are in released status. In the next step in QS 51 I am trying to edit the selected sets but when I enter the catalog, plant and the set the error message qs204 comes which says 'Selected sets are not defined for these catalog types'. and the performance assistant recommends maintaining the table TQ15so that selected sets are allowed for the catalog type.
Why is this error coming? after I have maintained all the required catalogs. Kindly help me with the solution as soon as possible as it is quite critical.
Thanks,
Ariel.

Hi,
This is the correct community regarding your subject. please let me know what is the type of catalog your creating selected for. SAP allows you in standard for creating selected sets only for some of the catalogs namely Usage decision, Character attributes
If you need to maintain selected for other catalogs you have to do the customisation
SPRO > QM > Quality Planning > Basic Data > Catalog > define Catalog Type> choose the catalog > maintian Selected sets allowed
Hope this helps
Regards
Gajesh

CODE Group, CODE Group Profile

Hi Experts
What is CODE Group and CODE Group Profile
Whats the use of CODE Group and CODE Group Profile
How it will works
I will be very happy to reward points.
Thanks and Regards
Kumar
Edited by: Kumar on Sep 24, 2008 8:48 AM

Hi Kumar,
Catalog
Catalogs are resources which help ensure the uniform use of terms. CRM uses a dual level hierarchy comprising of code groups and codes for catalogs. The terms are coded at client level in a corresponding coding. The codes themselves are composed of four characters, and are assigned to a code group composed of eight characters.
Code
A key that uniquely identifies the qualitative contents of a problem in a coded form that can be mechanically processed.
Each code is assigned to a code group in the catalog. A code can describe:
a characteristic attribute
a defect type
a usage decision
Code Group
A key for summarizing codes and structuring a catalog according to various criteria.
The assignment of codes to code groups takes place at client level.
Regards,
Shahina

Code group

Dear all,
We use quality management module. My requirement is in notification of type Q3 we use code group to enter defects, is there any possibility of restricting certain codes of the code group for certain users only.
i.e., if i have a code group x of catalog type 9 wherein in x we will have various defect codes like d1,d2,d3....... - Can these codes for example user1 can only select codes d2 and user2 can select any codes from d1,d2,d3...
Regards,
M.M

Closed

Service Ticket - Categorization Schema (Codes, Catalogs, Code Groups)

I have a Categorization Schema (attached to a subject profile used as categorization for a service ticket in CRM 2007 IC)
BMW
--- 3 Series
--- 5 Series
--- Z4
Mercedes Benz
--- C Class
--- E Class
--- S Class
I have
Catalog - "Cars"
Code Group "BMW" with it's Codes (2, 5, Z4)
Code Group "Mercedes" with it's Codes (C, E, S)
When I create the Schema each node asks me for a Subject Code. In the dropdown I get 2,5,Z4, C, E, S.
How do I just get it to show the codes in the subject code dropdown relevant to either BMW or Mercedes?

Hi David,
I can easily relate to your concern as i was also involved with the same.
Actually category schema will always give you list of all the codes because there is no heirarchy maintained. Hence , it is a one time activity wherein you will have to select the particular codes from the list of all codes for your schema heirarchy.
I gave the description to my codes to make it simpler..
ie..category 4 for me reads -->Cars-BMW-Z4
--->cars-MZ-C
This is just a help so that you can easily reach your correct code from the list of codes to be assiogned for your category modeler
this is one of the most laborious tasks, although it can be imported and exported.
hope this helps
Thanks
Regards
Raj

Catalogs, code groups and codes not available in service order in Web UI

Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DP

Deepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin.

Catalog -code group & codes (object part,causes,damage,etc)

Dear PM gurus,
request kindly help to activate and flow the catalog - code groups & codes in standard report of iw29 or iw59 for the following code group & code
Notification Header level of Items :
1. Code group - Object part & code
2. code group - Damage & code
Sub header level of Items -- CAUSES
1. Code group & Code
Cause code text & cause text
in pm & service notification we are using the above code groups & codes, but the contents are not flowing in IW29 & IW59, pl help
thanx in advance
regards
Srihari

hi arun,
can u pl tell me whether i get
code group text & code text of the following in iw29 report thru filter?
causes
damage
activities
the above codes are given in pm notification, expecting the same info in iw29, pl do check thru set filter and let me know whether we get these along with (code group, coding code )
pl help if u know which report the above are coming
thanx in advance
regards
srihari

Catalog /Code group updation

Dear Experts,
As pe r my knowledge we have to update the below master data in SPRO only:
> Catalogs / Code Groups / Codes
Hope i m right, and we have to update the same manually one by one or any other BC or LSMW kind of thing is there. plz guide

Hi Deepak.........
Yes, its true that you can update the Catalogs, Code Groups & Codes through SPRO only. They are the master data to be uploaded in SPRO i.e. customizing. For this you donot need any BDC. By LSMW, you can upload this or simply cut paste of Excel Sheets is more than enough for this.
You cannot update this through Tcode because its a Client Specific & uploading a catalog will happen with using * means the entire catalog is blocked for usage by the users till you save your changes & close the screen.
Hope, you understand......
Regards.........

Code groups & codes -catalog

hi pm gurus,
we have customised catalog code for our pm-cs notificatcations.
we have code groups & codes under catalog.
we have created lot of code groups & codes in code groups, now we wanted to delete or deactivate or block some of the code groups & codes. how this is possible ?.
pl help.
regards
srihari

hi,
Please note down the path for deactivation of catlogs.
SPRO --- Plant maintenance & customer services - --- Maintenance & service processing -
maintenance and service notification -
notification creation -
notification conents....Maitain Catalog..
click on define catalog....
What u r asking is only about... catalog that's is the combination of code groups.....
from here u can deactivate catalog...
incase of doubt please ask...
Regards,
Amit kushwaha

Deleting codes from code groups/catalogs

Hi experts,
Is it possible to delete a code that is associated to a code group/catalog ?
Obs: I have already used this specific code. So, the field "U" (Data record is being used) is already flagged.
From all activities, I've checked if none of these activities are with the code.
But, I'm still unable to delete the code of code group.
Thanks in advance

For the code / code groups which are being used, you can't delete, but there's some workarounds :
If you can stop the creation of transactions for 2 mins. use METHOD 1, if not use the METHOD 2 for each code and code groups (which is harder, and longer).
METHOD 1
First method is to enter X to the field HIST in table TQ15 for the catalog in which the codes/code groups are. (it makes the catalog "inactive")
ATTENTION : You must rechange it when you have finished deleting codes / code groups !!!
METHOD 2
Edit the field VERWENDUNG of the table below (you must remove the value 'X' with DEBUG directly from the table):
table for code : QPCD
table for code groups : QPGR
hope this helps..

Catalogs, Codes and Code Groups in Response Profile

can i assume this parameters to product or something else?

Hi Alex,
When you create a response profile for your service process, you must define the response times based on your SLA. The response times can be defined by priority (so that your incidents with very high priority must have a first response in 30 min and be completed in 2 hours, for example) but you also can define that the system should calculate the dates based on indicator keys that have different timeframes with durations, so you can combine and configure that incidents with priority X and category Y have a different duration for first response than an incident with the same priority but category Z, and so on..
In order to use category, code and code groups, you must first maintain these values via SolMan IMG in "Scenario-Specific Setting->Service Desk->Maintain Categories and priorities", and you can maintain Catalogs and Codes via "Scenario-Specific Setting->Service Desk->Define Catalogs, Codes and Profiles".
(They are also available in the CRM IMG)
Hope I could help you..
Regards,
Raquel Cunha

Field"Code group" is not in the result for report CRM_SRV_REPORT

Hi Guys,
For the tx CRM_SRV_REPORT - Service Process Monitor, the field "Code group" is not in the standar result, but, is in the initial screen for filter selection.
This field is not available in the layout modification.
How can I add this field to the layout of the result list?
Regards,
Lyda

Hi Lyda,
Additional field cannot be added in the layout of the result list.
If you will observe the code of the report CRM_TSRV_REPORT, in the field catalog, there is not Code, code group etc., hence it is not seen in the layout.
Since it is a std report it cannot be modified, either u can create a Z report by copying this or u can raise an OSS message for this.
Regards,
Shalini Chauhan

How to copy existing catelog,code group and code...

Hi All,
My requirement is how to copy all the existing catalog, code group and its codes from existing SAP system to excel? Because I need to upload all these from R/3 4.7 to ECC 6.0 or what is the best way to do that?
Regards,
Anish Ahya

Hi Kapil,
Thanks for your help. But I don't know how to use T code OIDW (Download catalog profile). It would be very helpful if you throw some light on this.
Hi Ashish,
Thanks.I guess this is the last option. Lets check whether any other standard solution is available or not.
[Useful Info|Catalogs & selected sets;
Regards,
Anish Ahya

Code groups to a Catalog ?

Similar Messages

Maybe you are looking for