Code Inspector Errors

Hi ,
When i am checking my code(Module Pool Program) with Code Inspector it is showing some errors in User Interface saying ..
==> I/O field (input field) ... has no accessible label
Can any one tell me abt this what exactly could be the error .... ( Syntactically Correct & also activated Well ).
Waiting for ur reply.....
Regards,
Srinath

Usually when we create input field from dictionary, input field is accompanied by a label on its left. And if you see carefully there is a line connecting the label and the input field.
Do you have any input field which doesn;t have corresponding label, or is there any label and input field pair where you cannot see the line connecting them.
In former case define label for the input field (in same line) and check that in property window of label on 'display' tab either checkbox 'As label on left' or 'As label on right' is checked. In latter case just check the property and check these two checkbox.

Similar Messages

Code Inspector Error

I am validating the delivery status field in vbuk table as it exists in my selection screen.
I am not having vbeln field in my selection screen .
CODE INSPECTOR ERROR:
Large table VBUK: No field of a table index in WHERE CONDITION.
I am getting above error how to resolve this.
Is there any other solution to resolve this error rather than creating secondary index on this field.
METHOD validate_delivery_status.
IF s_lfstk-low IS NOT INITIAL.
SELECT lfstk
INTO g_lfstk
FROM vbuk UP TO 1 ROWS
WHERE lfstk EQ s_lfstk-low.
ENDSELECT.
IF sy-subrc NE 0.
IF g_lfstk IS INITIAL.
MESSAGE e043(z12). “ There is no data match your selection.
ENDIF.
ENDIF.
IF s_lfstk-high IS NOT INITIAL.
CLEAR g_lfstk.
SELECT lfstk
INTO g_lfstk
FROM vbuk UP TO 1 ROWS
WHERE lfstk EQ s_lfstk-high.
ENDSELECT.
IF sy-subrc NE 0.
IF g_lfstk IS INITIAL.
MESSAGE e043(z12). “ There is no data match your selection.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
Thanks in Advance
Regards,
Avinash.

There's no need to keep repeating information already given.
As it stands your validation won't work. What if the user enters a selection of ranges? Or an exclusion? Or just an "*" to get everything?
Use the correct function module to get the valid values for the domain LFSTK (see here: GET DOMAIN FIXED VALUE - Code Gallery - SCN Wiki) into an internal table. Then
DATA match TYPE abap_bool. match = abap_false. LOOP domain_values INTO domain_value. CHECK domain_value IN s_lfstk. match = abap_true. ENDLOOP.
IF match EQ abap_false.
..." Sorry, pal, not valid.
ENDIF.
Validating select options is not straightforward. If you need to validate against a db table, then you can only use
SELECT SINGLE blah FROM dbtable INTO otherblah WHERE field IN s_field.
IF sy-subrc IS NOT INITIAL:
    " Sorry, pal, not valid
ENDIF.
Which, as you've seen, is not very efficient.

Code Inspector Error in program

Hi All,
When I released the transport for a program through solution manager, it showed a warning as "program contains code inspector error. Release anyway?" and I released it since the subtask was already released and changing the program will not be possible in that transport request. Now the program is in Quality system. But my concern is that what problem a program can cause when it is moved to production if it contains Code Inspector error? Since I have no much experience in ABAP. Please advise on this.
Regards,

It depends on what kind of errors you got in Dev system .
You can again check the program for code inspector errors and if there are Priority 1 errors fix them in a ne wTr.

Code Inspector Error Code MESSAGEG_H

Hello Guys,
I'm running code inspector and in Syntax check/Generation and subdivision suspect conversions, am getting an error called "Truncation in the Conversion from ABAP type 'C'(length 64 ->20).
While I understand what the error is about...i don't want to modify the code. Is there any workaround like putiing some "EC Check" at the end of the line so as to hide that error.
Thanks a lot.
Karthikeyan

If the error can be hidden, the pseudo comment would be provided in the Code Inspector screen only.
Click the documentation button (the blue "i" button) & see if there are any pseudo comments to hide the error.
BR,
Suhas

Code inspector error with exception

I have below code :
IF P_SUMM = C_ON.
   CALL FUNCTION 'ZSD_REPORT_HEADER'             "Write std Nike header
         EXPORTING
              PROGRAM   = V_PROGRAM
              LINE_SIZE = SY-LINSZ
              RUN_DATE = V_DATE
              RUN_TIME = V_TIME
              TITLE_1   = TEXT-025
              TITLE_5   = '1424'
              PAGE_NO   = SY-PAGNO.
   IF SY-SUBRC <> 0.
     WRITE: 'Problem with ZSI_REPORT_HEADER'(019).
   ENDIF.
However in the code inspector it is giving error :
Program ZSDR_TOP_ACC Include ZSDR_TOP_ACC Row 988 Column 0
No EXCEPTION to set SY_SUBRC Declared for CALL FUNCTION 'ZSI_REPORT_HEADER'
Thus the value of SY-SUBRC is always 0
Could you please suggest me how to eleminate error. YOUR Helpis highy appreciated.
Thanks in advance and happy new year.
Code Formatted by: Alvaro Tejada Galindo on Jan 4, 2010 5:34 PM

CALL FUNCTION 'ZSI_REPORT_HEADER'
         EXPORTING
              PROGRAM   = V_PROGRAM
              LINE_SIZE = SY-LINSZ
              RUN_DATE = V_DATE
              RUN_TIME = V_TIME
              TITLE_1   = TEXT-016
              TITLE_5   = '1425'
              PAGE_NO   = SY-PAGNO
*ADD Exceptions even the FM does not have exceptions.
          EXCEPTIONS
              OTHERS    = 1.
    IF SY-SUBRC NE 0.
      WRITE: 'Problem with ZSI_REPORT_HEADER'(028).
    ENDIF.
We can add exception like above even though the exception was not declared in Function module.

To get Code Inspector Errors into an internal table

Friends,
My requirement is to report if there exists any Error, warning or information in the Code Inspector & SLIN. I need to include these values in a report.
For this i will have to get these values into my program. Any idea how can this be achieved?
Many Thanks!
Abhinav siddharth

Hi Lakshman,
Could you please help me figuring out the parameters requried to execute these FM's?
I could run 'EXTENDED_PROGRAM_CHECK' but i could not see the result.
Thanks,
Abhinav Siddharth

Code inspector error message please help

Hi All i have used delete statement as shown below
DELETE t_output WHERE remain_invoice NOT IN s_invo[].
t_output is my internal table .
Error message in code inspector is :Sequential read access for a standard table
What should i do ?

I think its better to avoid delete statements inside the loop
instead of using delete statement inside the loop
use
delete table itab where condition
or
if u have to use loop at any cost
modify internal table with flag=X
and then delete all records from the itab at one shot using above statement
Regards
Vikas C

Code inspector error in smartform

Hi ,
When iam running code inspector for smartform . this is the error that iam getting ==> The type of the VALUE parameters "JOB_OUTPUT_INFO" contains one or more tables whose row types in turn contain internal tables and also says that ==> The TADIR entry for /1BCDWB/SAPLSF00000185 is missing .
Thanks in advance .

Hello Ms. Anupama,
Thanks for the immediate reply.
I have already created a message class for messages required in validations of smartforms.
Error: Message 023 :Entry in TADIR table for smartform FM is missing.
But when checked in TADIR table there is entry for smartform, Message class present.
Please do help.
Thanks once again

Code Inspector Errors during Upgrade?

Hi,
We are moving from 4.7 to Netweaver 7 . During the upgrade we found there are errors using Code inspector, Please confirm me that whether errors coming thru Code inspector , whether we need to correct these?
But the programs have no syntax errors, all programs compiled properly.
Thanks
Sa_R

Hi,
Its not required to resolve all of them, they will be arranges as Errors, Warnings etc.
So try to resolve the Errors.
Each error has how it can be solved some times they will give you options to hidethe rros by putting some comments on the perticular line.
Regards,
Sesh

Error in code inspector

Hi Abapers,
I have done recording for Tcode:pa30 in my report and used call transaction method. because of this i'm getting one error in when i check code inspector.
error message:
CA CL_CI_TEST_CRITICAL_STATEMENTS0002
Critical Statements
Call of Transaction &1
&1 = Name of Transaction
For CALL TRANSACTION there must already be a suitable transaction authorization with the calling transaction.
Kindly help me out to fix this error.
Thanks in advance.

Hi
Goto SE24
enter this class CL_CI_TEST_CRITICAL_STATEMENTS
and see its documentation.
It shows the all critical errors that are there in code.
Regards
Anji

Code Inspector Issue - "MODIFY - without TRANSPORTING was found in line "

Hi all
I am new to abap and my transports are unable to move further because of code inspector error
"MODIFY - without TRANSPORTING was found in line ". Help me resolve the issue.
For example
LOOP AT i_user_add.
    i_user_add-mandt = sy-mandt.
    MODIFY i_user_add.
ENDLOOP.
<removed_by_moderator>
Edited by: Julius Bussche on Oct 16, 2008 3:23 PM

Hi ,
       while modifying the internal table specify wich field you are modifying
modify <internal table > from <work area> transporting <fields>.
regards
naveen

Select query gives error in Code inspector and extended program check

Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
      INTO (g_stell, g_name)
      FROM pa0001
      WHERE pernr EQ wa_nca_tab-pernr AND
            endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.

The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
             endda EQ c_date AND
             z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message

Code Inspector Showing Error!!!

Hi All,
How to correct the following error raised by Code Inspector Check!!!!
ProgramZFTSRPRECC Include ZFTSRPRECC Row 1 Column 0
The namespace of the programZFTSRPRECC has the setting "C" and cannot be
tested
A possible cause for this is that an SAP program is being checked in a customer
system
Note, the following rule applies after a change in the sourcecode:
For testing the namespace settingis ignored for one week.
regards,
naveen.....

Check the attributes of the program, whether u may be selected "C" in Application option, if yes change to something else and test.
Pls get back with the result.

How to remove Unicode errors from extended check and code inspector

Hi
We are working on making all our ABAP program to make unicode compliant. We are activating unicode flag in attribute and correcting syntax errors. After this when we do the extended checks or SLIN or code inspector, usually giving error for many statements such as whenever there is message.
<b>Code is :</b>message a208 with text-004.
<b>Error description is</b> :
The message 208 for id zz has no long text.
You can hide this message using "#EC *
208 is - & does not exist in & &. And text 004 is - Cannot open the output file
By using #EC * we can remove errors. But Is this the correct way and what does this indicate? Please explain.

Hi Yogesh,
Can you check whether the message number 208 in message id ZZ has the Self Explanatory checkbox as checked or not? I think it is not checked and u have also not maintained any long text. Hence the error.
By using #EC - you do not remove the error, however u hide it from SLIN.
It is used if there is some known error you cannot avoid which is returned by SLIN and you dont want it to be reported. Also, a way to "cheat" the reviewer who might be checking for errors.
Not good !!
Regards,
Aditya

Code Inspector / Extended Check - Error in Inbound Custom Function Module

I have created a new cutom FM for Inbound IDOC Application Posting.
In the TABLE   Parameter of FM the following Tables difined.
IDOC_CONTRL                     LIKE     EDIDC
IDOC_DATA                     LIKE     EDIDD
IDOC_STATUS                     LIKE     BDIDOCSTAT
RETURN_VARIABLES     LIKE     BDWFRETVAR
SERIALIZATION_INFO     LIKE     BDI_SER
while checking with Code Inspector Tool I got an Error for BDI_SER.( Last Table Parameter of the FM)
Syntax check warning
"BDI_SER" can be enhanced. After a structure enhancement, the semantics of the
parameter transfer may change.
Internal Message Code: MESSAGE G_B
(The message can be hidden with "#EC ENHOK)
Type "BDI_SER" or the type of one of its subcomponents can be enhanced. The semantics of the parameter transfer may change after a structure enhancement.
For the execution of a Remote Function Call (RFC), the actual parameter and formal parameter do not have to be of the same type. In the case of structure types, the actual parameter and formal parameter can contain additional components at the end. These additional components are set to their initial values.
Check whether the enhancement category of the relevant type correct is set or whether the category "cannot be enhanced" should be used.
How to fix this error? other wise how to supress the Message by adding "#EC ENHOK
where I have to add the Comment "#EC ENHOK.
please help to give details .
Thanks in advance.
Shar

In the source code you will have this in comment right, use the "#EC ENHOK.

Code Inspector Errors

Similar Messages

Maybe you are looking for