Code inspector warning for this statement

Sequential read access possible for a sorted table
lt_action_fld is a sorted table.
DELETE lt_action_fld WHERE status = '0'.
can anybody tell me how to improve it?
Best regards,
Blake Le

Hello Blake,
Try this:
READ TABLE lt_action_fld WITH KEY STATUS = '0' BINARY SEARCH.
wf_index = sy-tabix.
loop at lt_action_fld from wf_index.
if lt_action_fld-status ne '0'.
exit.
endif.
delete lt_action_fld index wf_index.
endloop.
Let us know, if this helps.
Rgds,
Raghu.

Similar Messages

  • 500 Internal Server Error OracleJSP: code too large for try statement catch

    We have an application which uses JSPs as front end and we are using Struts 1.1. When we run one of the JSP it shows the following error after executing .We are using OCJ4 server having version 9.0.4.0
    500 Internal Server Error
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:E:\oracle\product\10.1.0\AS904\j2ee\home\application-deployments\VAS3006\vas\persistence\_pages\\_Requirement .java
    code too large for try statement catch( Throwable e) { 
    7194
    code too large for try statement catch( Exception clearException) { 
    44
    code too large for try statement try { 
    23
    code too large public void _jspService(HttpServletRequest request, HttpServletResponse response) throws java.io.IOException, ServletException { 
    The JSP/application runs okay on one machine (System Tesing machine)with OCJ4 server having version10.1.2.0 but throughs an error on other machine( Development machine)with OCJ4 server having version9.0.4.0.The question is why it is running on one machine ane giving error on other machine I am aware that there can't be more than 64kB of code between try-catch block .Total size of the generated JSP class in our case is 577KB.
    Is the problem because of different version of Application server OC4J?.Is it any fix for this? Or Can anyone please suggest a work around. Or is there a method by which the JSP generated code is split between different try - catch blocks rather than a single try-catch block.Utlimately We don't know the whether is it a problem with JVM or hardware .
    It would be really helpful if you would provide me with some suggestion and input.
    Regards
    Shyam

    Sir,
    I am aware of the limitations of JVM that it won't allow java code more than 64Kb in method but we are using different versions of Application server .Application is working okay with OC4J application server(10.1.2.0) but gives error on Application server with version 9.0.4.0. Is this a problem with OC4J application server 9.0.4.0. I had gone through the documentation ofOC4J 9.0.4.0.application server but it does not mention about the this bug/fixes.
    Please giude me on the same.
    Regards,Shyam

  • Error in jsp:Code too large for try statement

    Hi friends,
    When i try to run a jsp program i am getting error "code too large for try statement". How can i rectify it rather than truncating that jsp? is there another way?
                                                  Basha

    Basha,
    When we were implenting an e-form component which was very big, the only way we were able to achieve it was by
    "jsp includes". In the main form simply included muliple
    jsp pages, where each was a section of the e-form.
    we have not found any other better way.
    Hope this helps.
    -Venkat Malempati
    Message was edited by: Venkat Malempati
    Message was edited by: Venkat Malempati

  • Code too large for try statement

    I have a jsp that I am getting the following exception on.
    [ServletException in:/jsp/DLG_PTEN.jsp] Unable to compile class for JSP C:\Documents and Settings\ebsgam\My Documents\IBM\wsappdev51\workspace\StnWeb\.metadata\.plugins\com.ibm.etools.server.core\tmp0\cache\localhost\server1\DefaultEAR\StnWeb.war\jsp\_DLG_5F_PTEN.java:13576: code too large for try statement } catch (Throwable t) { ^ C:\Documents and Settings\ebsgam\My Documents\IBM\wsappdev51\workspace\StnWeb\.metadata\.plugins\com.ibm.etools.server.core\tmp0\cache\localhost\server1\DefaultEAR\StnWeb.war\jsp\_DLG_5F_PTEN.java:1165: code too large for try statement try { ^ 2 errors '
    I am currently running this on Websphere Aplication Developer 5. First off I'm hoping that this error will go away when it is deployed to tomcat. But I wanted to see if anyone has had this problem and knows of a tweek or work around for it.
    The jsp in question is not the longest one I have... but it has a large number of drop down list boxes .. using jstl <select><option>. and the drop downs have around 40 or 50 items in them.

    in weblogic 8.1, i've met the same error, and solved the problem by adding param to weblogic.xml , like below:
      <jsp-descriptor>
         <jsp-param>
              <param-name>noTryBlocks</param-name>
              <param-value>true</param-value>
         </jsp-param>
      </jsp-descriptor>

  • Code too large for try statement - help :(

    Please help :(
              We are migrating our project from an older technology, Kiva from netscape
              (and about time we migrate) . Kiva uses template evaluation similar to
              jakarta velocity. So the fastest way we found was to translate kiva
              templates to JSPs via perl script. All is working fine except a bunch of
              JSPs which are too large for the compiler to handle. If we were not
              migrating and instead wroking from scratch we would have simply made the
              JSP's size smaller and used jsp:include, but in this case it will involve a
              lot of effort as that means changing a lot of business code.
              Basically what we get is "code too large for try statement". Is there anyway
              we can tell weblogic to put smaller code fragments in try/catch when it
              converts a JSP into java code.
              

              Haider,
              Have you seen the following Sun Bug Parade posting
              http://developer.java.sun.com/developer/bugParade/bugs/4210912.html
              Additionally, you may want to try the '-noTryBlocks' jsp compiler switch and see
              if it makes a difference
              See the following 6.1 URL
              http://edocs.bea.com/wls/docs61/jsp/reference.html#57805
              Chuck Nelson
              DRE
              BEA Technical Support
              

  • How do you avoid a code too large for try statement error message while com

    i have the jsp which is having 142 fields
    i am trying to dispaly 142 fields its showing the above error
    at runtime
    i think JVM is not allowing to complie the jsp
    please any body give me the solution for it

    I've got the same error with Weblogic 8.1 .
    When I tried to visit a JSP I wrote, which had many tags, the page showed the error: code too large for try statement.
    I'v reviewed a lot of discussions through the internet and solved the problem at last by adding one parameter to weblogic.xml.
      <jsp-descriptor>
         <jsp-param>
              <param-name>noTryBlocks</param-name>
              <param-value>true</param-value>
         </jsp-param>
      </jsp-descriptor>Hope this may help you out.

  • Error: code too large for try statement, when compiling a big java file.

    Hi,
    I have a big java file ( around 16000 lines). When compiling it, I got following error message:
    MyMain.java:15233: code too large for try statement
    } catch ( Throwable t ) {
    In MyMain.java, I just repeat following statements about 1000 times.
    try {
    if ( year >= 2002 ) {
    System.out.println( "year: Evaluation version is not valid" );
    } else {
    System.out.println( "year: Evaluation version is still valid" );
    } catch ( Throwable t ) {
    if ( year >= 2002 ) {
    System.out.println( "year: Evaluation version is not valid" );
    } else {
    System.out.println( "year: Evaluation version is still valid" );
    I tried 1.3 and 1.4 javac compiler, there was some error.
    How to make compiler to compile this code?
    Thanks,

    Hi,
    I have a big java file ( around 16000 lines). When
    compiling it, I got following error message:
    MyMain.java:15233: code too large for try statement
    } catch ( Throwable t ) {
    I tried 1.3 and 1.4 javac compiler, there was some
    error.
    How to make compiler to compile this code?
    You don't. Each method has an absolute limit on the number of byte codes. You have reached that limit. The limit is part of the specification and JVMs will refuse to run classes that exceed the limit. So even if you could compile it, it wouldn't run.
    It is quite common for code generators to generate large monolithic blocks of code. Presumably this is how you got to this spot. Modify the code generator to break it into smaller blocks.
    If you did it manually then you did it wrong. And you will have to manually break it into smaller blocks. (And re-examine your design since it is probably wrong.)

  • JSPX: code too large for try statement try

    I'm migrating an application from Tomcat 5 to OC4J 10.1.3.2 and I'm getting the following error in a JSPX file.
    8770
    [jsp src:line #:931]
    code too large for try statement try { 
    This isn't an issue in Tomcat because of the way jasper creates the .java file. OC4J creates one really long _jspService method.  Is there anything I can do short of rewriting the page to fix this?  Let me know if further information is required.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    I have created bug 6152265 to track this.

  • Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version

    Hello somebody can help me.
    Hello, I have a license to acrobat standar, but acrobat standar is not available only acrobat pro and my license code is incorrect for this version.

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe AIR for Android as3 codes not working for this one project

    I'm trying to use Accelerometer in my flash game, which works for every other project I'm working on, but for some reason on this one project if I try using it I get errors, using the same code i've used before, such as this. 
    1046: Type was not found or was not a compile-time constant: Accelerometer.
    1180: Call to a possibly undefined method Accelerometer. 
    This is a fairly old file, not that old, so are there files I need to add to it to get it to work, or settings I need to change? This is very frustrating, I don't know what the problem possibly could be. Can anybody help me?

    The error message is indicating it cannot find the class.  Make sure you are importing it:
         import flash.sensors.Accelerometer;

  • Sample code and transaction for this requirement

    Developed a SAP Script for the shipping details. Shipping details is a legal document for the forwarding agent who is going to carry the shipment goods from the company to the customer

    Logic is good but try to avoid MKPF Table..
    I guess you can use EKBE table instead of MKPF and MSEG table.
    your code will take while if you move to PRD.
    Other table fields logic is good.
    Thanks
    Seshu

  • Code Inspector Checks

    Hi All,
    I am doing Code Inspector Check for my Program.
    Doing this, I am getting an Error Message Indicating to use TYPE TABLE OF instead of OCCURS 0 statement while declaring Internal Tables.
    Question is, Is there any difference between TYPE TABLE OF and  OCCURS 0 (Performance wise) ?
    Helpful answers will be rewarder by points.
    Thanks & Regards
    Swatantra Pathak

    HI,
    Yes.
    OCCURS 0 is obsolete now.
    When we define internal table with OCCURS 0 it will allocate a default memory of 8KB. In TYPE TABLE/STANDARD TABLE OF it is dynamic i.e as and when we get a record memory will be allocated.
    eg: If ur itab is with OCCURS 0 and u have data of size 2kb then 6KB memory is wasted i.e allocated and not used.
    eg2: If ur itab is with OCCURS 0 , Each record accupies 1 KB. Then after filling 8 records and at the time of getting 9 th records another 8KB is allocated. If u have 9 records in ur table then 7KB is wasted.
    If u r getting allocated with some memory(Resource) and not using means performancewise it is bad.
    Hope above examples are clear.
    Thanks,
    Vinod.

  • Compilation Error Code too large for Try block

    I am getting error while jsp compilation.
              code too large for try statement.
              Can anybody help me in this. I am using WL 8.1.4
              Thanks in Advance
              Himanshu

    This article pretty much sums it up: http://www.experts-exchange.com/Web/Web_Languages/JSP/Q_20711819.html
              Your JSP_.java file will not compile to a .class file since the JSP is too large and the newer java compiler is more strict. You have to most likely break your JSP up using includes or use a more efficient design.

  • Code inspector check

    iam working on ECC6.0
    my report contains 4 radio buttons.
    i done code inspector check for program.
    P_ful is radio button.
    i got error  like I/O field (input field) P_FUL has no accessible label.
    how to hide this error.
    Regards,
    Suresh.

    Hi,
    I declared text symbols for radiobuttons.
    iam using below code.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS P_FUL RADIOBUTTON GROUP RC  .
    SELECTION-SCREEN COMMENT 3(15) TEXT-003 .
    SELECTION-SCREEN POSITION 20.
    PARAMETERS P_PAR RADIOBUTTON GROUP RC .
    SELECTION-SCREEN COMMENT 22(20) TEXT-004 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-005.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS P_VAL   RADIOBUTTON GROUP RA DEFAULT 'X' USER-COMMAND UC2.
    SELECTION-SCREEN COMMENT 3(11) TEXT-006.
    SELECTION-SCREEN POSITION 20.
    PARAMETERS P_UPDE RADIOBUTTON GROUP RA.
    SELECTION-SCREEN COMMENT 22(15) TEXT-007.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B3.
    Please help on this.
    Regards,
    Suresh.

  • Custom process code and FM for custom IDoc...

    Hello Experts,
    I created a custom IDoc based from ARTMAS05 IDoc. This is because we only need 3 segments and
    the standard idoc(Artmas05) contains so many segments that we need.
    Now, will I create a custom process code and FM for this? how do I go about this?
    Thank you guys and take care!

    Hello,
                 Here are the Steps that we need to be following while creating a Custom Process Code with Custom Function Module. ( Since the Segments to be handled are very Less, I am recommending that you go for a Custom Function Module).
    1. Go to SE37 Create a Function Module. Please ensure to Create it with the IMPORT / EXPORT /TABLES parameters exactly in the way that they exist in any Standard SAP Inbound FM (Refer to IDOC_INPUT_ORDERS for example).
    2. Once our FM is Ready (Need not be Complete with the Code to go ahead with the Process Code Creation) and Active, the next Step is to Create an Entry in the Transaction Code BD51 where we will register the Function Module.
    3. Next, we'll have to go to T-Code WE57 where we'll have to make an entry for the Function Module with the IDoc Type & Message Type.
    4. Finally, go to WE42 and Create a New Process Code and assign the Function Module and the Message Type.
    NOTE 1 : The Process Code is, as we know, Client Dependent. So, once you create a Process Code, we need to have it migrated to the Testing Environment to Start & Carry Out Testing.
    NOTE 2: If Step 2 & 3 are missing, then we'll not be able to assign the Function Module in WE42 while Creating Process Code.
    Hope it was helpful.
    Thanks and Regards,
    Venkata Phani Prasad K

Maybe you are looking for