Code interface node - .lsb generated but does not load

Howdy,
i am using labview 6.1 and VC++/visual studio .NET 2003.
i tried creating a simple code interface node to add two numbers. i followed the steps given in the "Using External Code in Labview" Manual. I made only one change, which is switching out "$(WkspDir)\$(OutDir)" (under custom build) with "$(ProjectDir)$(OutDir)" as the $(WkspDir) macro is missing from VC++.
The build occurs successfully and i get a .lsb file. But when i ask the code interface node to load it up, it doesn't. The error description is, "Code Interface Node: object code not loaded."
any suggestions? thanks in advance.

Hi,
This KB describes what may be the issue. I hope this is helpful.
Regards,
Ankita

Similar Messages

  • When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    Assuming you're using iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything ov

    Firefox does not fully load Barclaycard Authentication site. It loads as far as asking for certain letters in my pasword but does not load the "Submit" button so I cannot continue with my purchase and have to switch to IE8 browser to purchase anything over the internet. Any clues?
    == This happened ==
    A few times a week
    == Couple of weeks ago

    Your UserAgent string in Firefox is totally messed up by another program that you installed, and Barclays doesn't know you are using Firefox 3.6.6 - it probably looks like IE 6.0 to that website.
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''general.useragent.'''
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset''''',
    Then restart Firefox

  • My library shows up on my apple tv but does not load

    My library shows up on my Apple tv2 but does not load.  Everything else works I can watch trailers, rented movies and things like that.  I could watch movies from my library through home sharing but it stopped working in the middle of a movie and hasn't worked since. Home sharing seems to work on my ipad and my other MBP but just not on the ATV2.  Did the reset and reinstall of software on it.....any one got any other ideas?

    I'm a bit unsure from your post which playlist is missing from where. If you deleted the "Purchased" playlist in iTunes it will be recreated next time you make a purchase. You can add your previous purchases into this list, and select it to be synced to your device. The "Purchased on <Device>" playlists are locked down and cannot be edited.
    tt2

  • Firefox 3.6.13 does not load AOL mail - it logs in ok but does not load

    I updated Firefox to the latest version and it will not load my AOL eMails.
    I can however log into my AOL account and it shows the Welcome message and number of unread mail and also shows the folders etc. including Spam folder but it does not load the eMail or will not allow me to open any eMails.- Just shows blank.
    BTW I can access my AOL mail Box with Internet Explorer.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • I upgraded to snow leopard, since then safari does open in the dock but does not load as set in my preferences and the title page remains blank even though I have set-up a home page. I completely re-initialised safari, but no change.

    I upgraded to snow leopard, since then safari does open in the dock (white dot) but does not startup as set in system preferences. Also, if I open safari, the title page remains blank even though I have set a home page under safari's preferences. I re-initialised safari, but no change.

    Having put my home-page under "new windows open with home-page" solves the "blank title page problem".
    One problem left: "safari" does not startup automatically as set in system preferences, whereas "mail", also set for startup DOES startup

  • Siebel Charts gets generated but does not display in the Web client

    Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
    There is either no error displayed on the front end...
    Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

    Dear User,
    Thanks for using Oracle communities.
    Does this happens in dedicated client as well?
    We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
    I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
    Best Regards,
    Chetan

  • When I download divx on firefox as they said it does not aks me to load, it downloads but does not load, how do I get it to ask me to ask me to download know automatically?

    I had divx on but took it off as they said to download another programe for downloading movies. (paid) when I download any programe I used to be asked if I wanted to install it. but know it does not and I have trouble finding where the download was and how to install it many times.

    Ohrita you can download the installation files for Creative Suite 5 at Download CS5 products.  You can verify the software license you purchased by checking your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • Format the OS and try to install OS X but does not load

    I need help, i was trying to format the OS and when i try to install the OS X dont load, appears load up to seven hours but eventually falls to 0 and does not restart

    Did you boot into Recovery Drive and select re-install OSX?

  • Website works in Firefox, but does not load in IE, Safari, Chrome.

    site: www.lightspinnersweb.com
    Page is a html wrapper around a  .swf.    The Flash includes .xml pages.  Shows no errors and works fine in Dreamweaver when 'test page in IE'.
    The Wc3 only shows errors in the <noscript....embed... section.
    Have tried everything I can think of. Would appreciate any ideas on what is wrong????

    Thanks ; I will follow your suggestion and post at a Flash forum,  I think,though, that the problem has to do with the browsers not finding the SWF file.???
    When I look at the page in IE, it looks like it sees the loading bar, but not the rest.??  Thanks again for the suggestion.

  • Command Tab cycles through open apps but does NOT load the window ??

    So I've got several apps running....Mail, Safari, iTunes. I hit command tab and tab over to the program I want and then RELEASE.....The program is displayed at the top of the toolbar but where is my window ??? Its still sitting at the bottom of the tool bar waiting for me to search for it. What gives ? Why isn't command tab doing loading the window ?

    Plenty of people, myself included, don't bother to minimize windows. We just keep everything open.
    Perhaps this article will help you?
    http://lifehacker.com/360537/restore-windows-minimized-to-the-dock
    ~Lyssa

  • Firefox page starts but does not load properly, cannot access toolbars or open web pages

    I recently installed the toolbar for MegaUpload. I had issues uploading a file with the program and uninstalled the toolbar. Since then, I cannot use my firefox. Firefox opens to a blank page displaying the menu bar only but I cannot use any of the menu options. I have uninstalled and reinstalled Firefox twice. I have reset my Norton security as well. I'm using the Google chrome right now but want my Firefox back! Help!!
    == This happened ==
    Every time Firefox opened
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.55 Safari/533.4

    SAME PROBLEM HERE. I couldn't find others with this issue so this is a good surprise. I thought about finding a 9 version, looks like I'll be doing that. There is no setting I can change to fix this issue. No add-on to uninstall, I even tried reinstalling the whole app. I load the start screen, but upon going anywhere with the web, it simply doesn't load and remains blank with my URL in the awesome bar.

  • I am having trouble getting my ipad to recognize the sat connection have turned off and back on it shows there but does not load safari

    I am having trouble getting my ipad to communicate with sat connection I have tried turning off and on re installing the sat connection but still cannot get safari to load

    Hello Brenda,
    Thank you for the details of the issue you are experiencing with your iPad.  It sounds like you're not able to access the Internet on your iPad.  I found a couple of resources that will help.
    If you are having trouble connecting to the Internet using Wi-Fi, I recommend the following article:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    If you are not able to access the Internet when connected to a cellular network, I recommend the following article:
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Creative cloud launches but does not load - using windows 7 PC

    I have uninstalled and reinstalled several times but when Creative cloud launches, the wheel turns and stops and it remains blank. Can anyone help please.
    Since asking this I opened Acrobat and it asked me to sign in which I did and now Creative Cloud launches and loads.
    New Question - How do I get Creative Cloud to recognise me when it loads?
    Message was edited by: Chocat123

    Branching this to a new discussion.
    NPotter.UK please make sure you are using version 1.2.1.260 or later of the Creative Cloud desktop application.  You can find more details at Creative Cloud desktop missing text | Windows 8.1 - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-missing-text.html.

  • Double clicking TDM file opens DIAdem but does not load file?

    Every other Windows program automatically loads the file when application opens.  Is there a setting for this?
    NOTE:  Using DIAdem 10.2 on Windows Vista Ultimate 64 Bit and Windows XP Pro 32 Bit.

    CaliDevGuy,
    You can try this file. It will update your registry files. I tried it on my computer and it works. You can load it into registry by double-clicking it.
    Regards,
    Song Du
    Application Engineer
    National Instrument
    Regards,
    Song Du
    Systems Software
    National Instruments R&D
    Attachments:
    CB_diadem.zip ‏1 KB

Maybe you are looking for