Code not sent to SMS

Can someone help me with this?
I recently downloaded Viber to my phone, it asked me for an access code with was suppose to be sent to my SMS both I never received it can you assist me please on this

Hi and Welcome to the Community!
You need to contact whoever it was that was supposed to send you the code. If it was Viber, then you need to contact them...you can find their contact information on their AppWorld Catalog page.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HT201287 iMessage is not sent as SMS

My Wife and I are both using iMessages. But in last days, when she is out and has no Internet connection, she is not recieving my iMessage ans regular SMS. On my phone it is marked as delivered iMessage, but she gets nothing. What can be the issue?
Thanks a lot!!

A very good question! I have had a similar problem this week. I sent an SMS text to my husband as I was away from wifi. He received it and sent a reply which went as an iMessage because he was on wifi. I obviously could not receive his reply - or the next 2 - until a phone call revealed our problem.
We now know that when he replied, he could have touched the blue iMessage ‘speech bubble’ of the reply to reveal the option to ‘Send as SMS’ and the speech bubble turns green and off it goes.
Surely he should not have to do this - and if a message is received as an SMS then the default reply position should be as an SMS?

HT202656 verification code not sent to my iPhone (Sprint) for two-step verification for apple id

I have tried to set up two-step verification several times using iCloud, first my iMac and then, when that didn't work, on my iPhone, all to no avail. I followed the instructions up to and including the step where the message says I will receive an SMS on my iPhone with a verification code. I never received the message with the verification code.
I am using Sprint as my internet provider and working with an iMac with Mavericks 10.9.5 as the operating system and iPhone 6 with IOS 8.2

Hey dagored,
Thanks for the question. I would recommend completing the two-step verification process and then changing the SMS number associated once you upgrade:
Apple ID: About two-step verification and SMS
http://support.apple.com/kb/HT5593
Or you can opt to complete the process and then turn two-step verification off completely:
Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/ht5570
Thanks,
Matt M.

Consultant "Registration code not sent for Crystal Reports Basic for VS2003

I need to know how to receive a CR registration code for VS2003.
In VS2003 when I open a Crystal Report, Iu2019m asked for a registration code. So I registered at the SAP website for the CR Basic for VS2003 license, but all I received was an email below. So where is my registration code for this? Where can I get one so I can stop the nag screen.

Hello,
Unless you or someone else edited your original posting there's no "email below" in your post. If the email has a keycode in it you don't want to post it here. You don't want to share your keycode with everyone.
Do you see a 19 or 23 digit alpha-numeric keycode in the email you received? If so, that's your keycode. If not, let us know and we'll see if we can find out who you can contact to receive your keycode.
Sincerely,
Dan Kelleher

Registration code not sent for Crystal Reports Basic for VS2008

I need to know how to receive a CR registration code for VS2008.
In VS2008 when I open a Crystal Report, I'm asked for a registration code. So I registered at the SAP website for the CR Basic for VS2008 license, but all I received was an email below. So where is my registration code for this? Where can I get one so I can stop the nag screen.
Email received below:
Thank you for registering SAP Crystal Reports, version for Visual Studio .NET 2008.
As a registered user of SAP Crystal Reports, version for Visual Studio .NET, you'll be the first to receive notifications of product news and updates, beta programs, and special events.
Make the SAP Crystal solutions support site your primary destination for technical support. Search the knowledge base, read and post to the forums, browse articles, and download service packs.
Tap into the full power of the SAP Crystal Reports product line. Visit our website, to learn more about optimizing your business, download trial software, and explore upgrade paths that can help you support larger deployments and diverse user needs.
Thank you for choosing SAP Crystal Reports, version for Visual Studio .NET.
Sincerely,
SAP.com Customer Service

This is not a technical support issue as such. Please call 866-681-3435. They should be able to help you out.
- Ludek

I am unable to sign in to icloud, verification code not sent to my email and message saying my account is being used elsewhere

Please help. thank you all

You have to sign out in System Preferences>iCloud and then sign back in with the new ID.

What should I do if I no longer have access to the phone number that my iCloud keychain verification code is sent to?

When I first turned in iCloud keychain I had no other Apple devises so I put in a phone number for it to send my verification number to. Then I had to delete that phone number but the iCloud keychain number is still saying it is going to send the verification number to that phone. How do I program in that that number is no longer active. Please help!!!!!

Hello Conor T,
Thanks for using Apple Support Communities.
If you do not have access to the phone number you set up for iCloud Keychain, you will need to contact Apple Support to complete setup on a new device.
How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
If you can't access any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
Your iCloud Security Code
The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you can't access this number, contact Apple Support, who can verify your identity, so that you can complete setup on your new device.
After you complete the setup, your iCloud Keychain will be pushed from the cloud to the new device.
Frequently asked questions about iCloud Keychain - Apple Support
Take care,
Alex H.

TS3899 Hi I can not sent a message from the iPad 2

HI I can not sent a SMS message from my iPad 2

Look here for help.
http://support.apple.com/kb/TS2755

IMessages being sent as SMS with Send as SMS turned off

I had an unhappy experience with iMessage. I had about a 1 1/2 hour period on 4/9 where my iMessages were being sent as SMS texts. I have Send as SMS set to Off and I have never had this happen before. I don't remember the iMessages screen changing to indicate it was sending as SMS.
Overall very strange since there should be no way that the messages were sent as SMS with Send as SMS turned off. This is a problem because I do not have a messaging plan since I don't use SMS so if it switches to SMS and I don't know it the charges could rack up. The hour and a half cost me $8 in SMS charges as it is.
If having Send as SMS set to off does not insure that messages are not sent as SMS texts then what will?

Yes, they were listed as SMS messages on my bill. I was texting all day with one person but it was only this 1 1/2 hour period that was changed to SMS. Nothing before or after that and it's never happened before to me. All very strange. The problem is that if this happened for a longer period it would get very costly and I would not notice it untill I got the bill.
I'm getting my gf to add her email address to her messages account and I will be messaging that from now on. Hopefully iMessage can't turn that into an SMS.
It would be great if there were some way to actually prevent iMessage from sending SMS, but the Send as SMS setting obviously does not work. The only other thing I can think is that it was sending the texts as MMS messages. There is not much if any documentation on the relationship between MMS, SMS, and iMesssage.

Sms code for verification does not reach to my mobile. ? i can not access my e-mail because of code that does not sent right now. code that related to my alternated e-mail was sent , but not to mobile

sms code for verification does not reach to my mobile. ? i can not access my e-mail because of code that does not sent right now. code that related to my alternated e-mail was sent , but not to mobile

Bugzilla is not the place for this sort of problem. Forwarded this post to the relevant team.

How to get a error message when sms is not sent to a mobile no.

Scenario: once po is finally released sms is sent to the respective vendor.This has been done. But, Now the client want to see the error details(i.e, the mobile no. to whom sms i s sent) if the sms is not sent to any mobile no. and also wants a z program through which they can schedule the background job of resending the sms to those no. who have not received.
As i tried a lot with this but unable to go ahead, so plz help me <removed by moderator>
TABLES:LFA1.
DATA : WA_FINAL LIKE ZME_EKKO_RLS ,
      IT_FINAL TYPE STANDARD TABLE OF ZME_EKKO_RLS.
DATA GV_MSG TYPE STRING.
DATA GV(16) TYPE C.
DATA : GV_RETURN TYPE STRING.
DATA: HTTP_CLIENT TYPE REF TO IF_HTTP_CLIENT .
DATA: WF_STRING TYPE STRING ,
RESULT TYPE STRING ,
R_STR TYPE STRING .
DATA: RESULT_TAB TYPE TABLE OF STRING.
*BREAK-POINT.
IF SY-TCODE = 'ME29N'.
IF SY-UCOMM = 'MESAVE' AND I_EKKO-PROCSTAT = '05'.
    SELECT * FROM ZME_EKKO_RLS INTO TABLE IT_FINAL
       WHERE EBELN = I_EKKO-EBELN .
    IF NOT IT_FINAL[] IS INITIAL .
      LOOP AT IT_FINAL INTO WA_FINAL .
        IF WA_FINAL-SSTAT = '02' .
          CONTINUE.
        ELSEIF WA_FINAL-SSTAT = '01' .
          SELECT SINGLE * FROM LFA1 WHERE LIFNR = WA_FINAL-LIFNR.
          IF SY-SUBRC = 0.
            GV = LFA1-TELF1.
          ENDIF.
          CLEAR GV_MSG.
          CONCATENATE 'Dear Sir/Madam, PO No:' WA_FINAL-EBELN ' Dtd:' I_EKKO-BEDAT ' with reference to vendor no:' WA_FINAL-LIFNR 'has been released on you''.' 'Detail hardcopy will be sent to you soon' INTO GV_MSG.
          CLEAR WF_STRING.
          CONCATENATE
          'http://182.18.143.30/sendsms.php?username=edhik&password=194385&'
          'sender=TSIL&mobile='
          GV
          '&type=1&message='
          GV_MSG
          INTO
           WF_STRING.
          CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
            EXPORTING
              URL                = WF_STRING
            IMPORTING
              CLIENT             = HTTP_CLIENT
            EXCEPTIONS
              ARGUMENT_NOT_FOUND = 1
              PLUGIN_NOT_ACTIVE = 2
              INTERNAL_ERROR     = 3
              OTHERS             = 4.
          CALL METHOD HTTP_CLIENT->SEND
            EXCEPTIONS
              HTTP_COMMUNICATION_FAILURE = 1
              HTTP_INVALID_STATE         = 2.
          CALL METHOD HTTP_CLIENT->RECEIVE
            EXCEPTIONS
              HTTP_COMMUNICATION_FAILURE = 1
              HTTP_INVALID_STATE         = 2
              HTTP_PROCESSING_FAILED     = 3.
*if sy-subrc = 0.
*call method http_client->get_last_error
*importing
*code =
*message = gv_errortext.
*endif.
          CLEAR RESULT .
          RESULT = HTTP_CLIENT->RESPONSE->GET_CDATA( ).
          REFRESH RESULT_TAB .
          SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
          REFRESH RESULT_TAB .
          SPLIT RESULT AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE RESULT_TAB .
          LOOP AT RESULT_TAB INTO R_STR.
            CONCATENATE R_STR SPACE(1) INTO GV_RETURN.
           write:/ r_str.
          ENDLOOP .
          IF NOT GV_RETURN IS INITIAL .
            UPDATE ZME_EKKO_RLS
                   SET: SMSTX = GV_MSG ,
                         sstat = '01'
               WHERE EBELN = WA_FINAL-EBELN .
            IF SY-SUBRC = 0 .
              COMMIT WORK .
            ENDIF.
          ENDIF .
        ENDIF .
      ENDLOOP.
    ENDIF .
ENDIF.
ENDIF .
Edited by: Vinod Kumar on Aug 1, 2011 2:58 PM

Hi
when you call the webservce to send the sms using the method if it is successful it will return as success and if any issue it will raise the error which you have to handle, but it will not give you confirmation wether sms is sent ,
regards
m.a

Do not have access to device on which keychain code was sent. How to enable i keychainfor my phone?

i do not have access to device on which ikeychain code was sent. So how to enable it on my phone

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

Asha 302 shows SMS received time, not sent

Hi, my 302 always shows the time an SMS was received, not sent. This makes it difficult when I have to turn my phone off, as when I then turn it back on, the messages come through as the time the phone was turned back on, not the time the message was actually sent. Is there any way to fix this? The date & time settings are all fine, and my service network is set to auto update, but still doesn't fix the issue.

You are not the only one with that issue. There, you go …
If you subscribe to that thread, you get notified, when something new happens – perhaps this way you get notified about other solutions, as well.

Why doesn't my Keychain verification code get sent to my fone

Why doesn't my Keychain verification code get sent to my fone

Hey Shad B.,
This article should prove relevant to the issue you are experiencing:
Get help using iCloud Keychain
http://support.apple.com/kb/TS4644
I'm not receiving the verification code via SMS.
Make sure that you have a strong cellular network connection on your phone.
Make sure that your phone number can receive SMS messages. You can do this by asking someone to send you a text message.
Make sure that the correct phone number is associated with your account:
iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Make sure the phone number under Verification Number is correct. If not, enter another phone number.
OS X Mavericks v10.9 or later: Choose Apple () > System Preferences. Click iCloud, then click Account Details. Make sure the phone number listed under Verification number is correct. If not, enter another phone number.
If you can't access a device that has iCloud Keychain enabled, you can contact Apple Support and verify your identity to get help completing iCloud Keychain setup.
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

CO54: Message is not sent to any destination: Commit Work is getting failed

Hello,
While processing the Messages from XFP to SAP Update is getting terminated due to the use of Commit Work. SAP Note 147467 - Update termination when sending process messages has been referred which is for 4.6C, but we are in ECC6.0.
While processing the message in second iteration Commit Work triggres and Update happens in the data base.
Following Issue is only concerned with Nested HUs
T-Code used CO54
Following are the analysis:
it looks like u201CCreate and Post a Physical Inventory Docu201D is failing in the initial processing because the inventory doc is created when the Transfer Order to the PSA (or the TO from the PSA) is not yet completed (quant is still locked somehow).
CO54, process message category=ZHU_CONS: HU to be consumed is a nested pallet (unpacking/ repacking and TOs to/from) and qty to consume is greater that HU qty in SAP (creation of a physical inventory doc is required).
1. The error occurs while clearing the inventory posting for the physical inventory document.
2. The surprising factor is the u201CProcess Messageu201D is not processed correctly for the first time.
3. Indeed it is successfully processed without any error if you do process it second time.
Error Log from C054 T-Code.
02.08.2010                                         Dynamic List Display                                                1
Type
Message text
LTxt
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message to be sent to destination:
ZHGI ZPP_0285_XFP_GOODSISSUE Individual Processing Is Active
=> Message will be sent to destination (check log for destination)
Message category: ZHU_CONS ---    Process message: 100000000000000621   "Send to All Destinations" Is Active
Message destination ZPP_0285_XFP_GOODSISSUE triggered COMMIT WORK
Input parameters OK, passed to source field structure
Step 0: Now checking if scenario with HU
Step 2: Scenario with HU, Now checking if HU nested
Step 3: HU nested, checking if HU in repack area
Step 4: HU not in repack area, moving it to repack area
HU moved to repack area, TO number 0000000873
Step 5: Depacking nested HU...
Nested HU depacked, HU pallet n°: 00176127111000461994
Steps 6-7: Moving back HUs to supply storage type / bin...
HU 00376127111000462001 moved back to original area with TO number 0000000875
Steps 6-7: Moving back HUs to supply storage type / bin...
No need to move back HU 00176127111000461994 (not in table LEIN)
Step 8: Checking if HU fully used and quantity matches HU system quantity
HU not fully used but picked quantity > HU quantity: inventory necessary
Step 9: Inventory needed, creating physical inventory document...
Physical inventory document 0000000126 created
Step 10: Adding weighted quantity on inventory document...
Weighted quantity entered in document 0000000126
Step 11: Posting rectification in inventory document 0000000126...
Physical inventory document 0000000126 rectified
Error: rectification for doc 0000000126 not updated in DB!
=> Destination ZHGI ZPP_0285_XFP_GOODSISSUE can currently not process the message
=> Message is not sent to any destination
The errors in SM13 for this contain the program SAPLZPP_0285_HUINV_ENH (creating/changing the HUM physical inventory doc). WM Function module L_LK01_VERARBEITEN is also involved.
From SM13, it displays the following piece of code in include LL03TF2M (read the LEIN table=Storage Units table):
WHEN CON_LK01_NACH.
       IF (LEIN-LGTYP = LK01-NLTYP AND
             LEIN-LGPLA = LK01-NLPLA) OR
              NOT P_LEDUM IS INITIAL.
       ELSE.
Das ist der Fall einer TA-Quittierung wo Von-Hu = Nach-HU ist und sofort die WA-Buchung erfolgt. Dann steht die HU noch auf dem Von-Platz, daher darf hier kein Fehler kommen, sondern es wird ein. Flag gesetzt, daß verhindert daß die LE fortgeschrieben wird.
         FLG_NO_LE_UPDATE = CON_X.
        MESSAGE A558 WITH P_LENUM.
       ENDIF.
Translation in English of the German text via Google:
"This is the case where confirmation of a TO source-HU = destination-HU, and now the WA (Good Issue?)- made book. Then, the HU is still on the From-space may therefore come here not a mistake, but it sets a flag that prevents that the LE is updated."
Thanks and Regards,
Prabhjot Singh
Edited by: Prabhjot Singh on Aug 2, 2010 4:39 PM

Hope you have carried out following things in Production ( Please refer to SAP help before actually doing it in production).
1. Transport the predefined characteristics from the SAP reference client (000) to your logon client.
2. Adopt Predefined Message Categories - In this step, you copy the process message categories supplied by SAP from internal tables as Customizing settings in your plants.

Code not sent to SMS

Similar Messages

Maybe you are looking for