Code of Defetive material?

Dear all,
I have a scenario that i am selling OK material and taking back of defective material.
Now there are two situations
(1) I can make same code for OK material and Defective Material
(2) I can make different code for Defective material.
What is advisable and how?
If i made different code can i take return of defective material with reference to OK MATERIAL?
Pls reply
Regards
Jayesh

dear,
u can configure the same per the requirement of yours business process.
u can use the same material by splitting the valuation.
by having separate valuation type/class u can have the same material code beeig used
even if u want to  have a separate code that too works, and getting back the original codes with defective code, u can think of 309 mvt type.
hope u got some use ful information

Similar Messages

  • Configuration of Tax code for a material

    Hi ,
    Does anyone know how annd where is the tax code of a material configures ?
    To elaborate, I am stuck ata condition in which I have to know if that particular material has a tax code configured for it or not.
    Kindly let me know
    Regards
    nilesh

    Hi,
    You can Create Tax Code with T.Code : FTXP and assign country and  Tax Jurisdiction code to It.Assign country, tax procedure  also.
    But tax on material , you have to define in your Calculation Schema with a condition type..Further  more you can enter tax code on Purchase Order in  Item Details and save.
    If helpful then reward.If ur question is answered, pl close it.
    Regards,
    Biju K
    Message was edited by:
            Bijay Kumar Barik

  • Accounting for code based  consumable material in SAP

    Hi Experts,
    Just a scenario I want to discuss with You all:
    Earlier were using  non-stock items (no material code,only text to procure materials) and projects were consuming it. Now, we are going to use material codes to procure non-stock items which now have master code for it now the requirement for this process is as below.
    At the time of GRN system pick project G/L(Profit and loss account G/L ) with account assignment S (or Q ) and respective WBS
    While transferring  the left over project qty to another project ,accounting document is to be created .
    Warehouse want to track to moved  quantity as well  from project to project and to own stock .
    considering these requirement  i m working on two logic.
    Logic 1 .
    I configured the material as value based material  so that while doing GRN  project WBS  is debiting
    and after consumption  of partial material quantity,  I am transferring the remaining cost of project to another project by  t-code KB61N or KB11N  where cost is moving from project to project .
    now to show quantity movement  i am developing one report which can show the quantity based on moved Price lets  say if unit prince is 10 and 200 cost is transferring from project to project  means 20 qty is moving  in customized report .
    Logic 2
    With the help of BADI or some development a virtual storage location  will be created on MIGO screen 
    and material will be fetched in this virtual storage location while doing GRN as a referance purpose
    and the same location to be used during transferring material from project to project
    let me know how far this logic and requirement is correct to code the consumable material and it  is  going to be  codified for reporting purpose .
    your earliest response will be appreciable .
    Thanks in advance .

    Hi Jurgan  ,
    scenario is like ,
    earlier for these material , material record was not existing
    but now business  want to create material  master for such consumable material for tracking purpose
    and these codified material is to procured under WBC and profit and loss account G/L not inventory G/L (balance sheet G/l )
    and to pick profit loss G/L  i made material as valuate material only  so that can populate accounting document while transferring value from project to project via  KB61N or KB11N
    now what value is transferring from project to project that will be picked in terms of quantity (unit value conversion to quantity )  in customized report
    hope scenario is clear now ..let me know if any query you have  to give your valuable inputs
    Thanks

  • T-codes for uploading material prices and domestic prices?

    t-codes for uploading material prices and domestic prices?
    regards

    Use Transaction VK11 and VK12 based on Condition type for price .
    Please reward if useful.

  • T Code for Changing material price

    Hi friends,
    Can anybody tell me what is the T-Code for
    1. To change th material price
    2. Transfer posting from Un-restricted stock to block stock
    3. Transfer posting from Un-restricted stock to Quality stock

    Steve,
    I have a requirement
    Daily cycle counts are completed on inventory. SAP prints nightly a count cycle of 50 inventory items to count (Inventory Audit). This is done so our warehouse folks count items throughout the year rather than at the end of the year all at once. Every January 1 of each year the cycle count begins until we finish cycling through the inventory, which usually happens around October.
    When suspend the inventory counts it places the inventory cycle counts on hold for a period of time. The cycling that would usually happen in October of each year is extended out by the days the inventory counts were placed on hold. This is to allow for 100% inventory audit counts. As I understand SAP puts those inventory counts on hold and begins again when it is restarted.
    I will need the TCODE to stop and start the inventory cycle count…
    Can you please help me out

  • Reg:package code to refresh materialized views

    i am new to pl/sql packages and procedures.i want it to execute for running mappings in informatica which takes 0 and gives 1 when executed successfully
    create or replace PACKAGE BODY pkg_refresh_mv as
    procedure prc_mv (p_mv_name varchar2) is
    begin
    dbms_mview.refresh (p_mv_name);
    end prc_mv;
    procedure refresh_all_mv (proc_response IN OUT number) is
    begin
    dbms_mview.refresh('materialized view','C');
    dbms_mview.refresh('materialized view','C');
    proc_response := 1;
    exception
    when others then
    proc_response := 0;
    end refresh_all_mv ;
    end pkg_refresh_mv;
    when i execute this code i get the following errors
    PLS-00201: identifier 'PKG_REFRESH_MV' must be declared
    PLS-00304: cannot compile body of 'PKG_REFRESH_MV' without its specification
    what needs to be changed
    thanks

    try this one :
    CREATE OR REPLACE PACKAGE pkg_refresh_mv
    AS
       PROCEDURE prc_mv (p_mv_name VARCHAR2);  
       PROCEDURE refresh_all_mv (proc_response IN OUT NUMBER);
    END pkg_refresh_mv;
    CREATE OR REPLACE PACKAGE BODY pkg_refresh_mv
    AS
       PROCEDURE prc_mv (p_mv_name VARCHAR2)
       IS
       BEGIN
          dbms_mview.refresh (p_mv_name);
       END prc_mv;
       PROCEDURE refresh_all_mv (proc_response IN OUT NUMBER)
       IS
       BEGIN
          dbms_mview.refresh ('materialized view', 'C');
          dbms_mview.refresh ('materialized view', 'C');
          proc_response := 1;
       EXCEPTION
          WHEN OTHERS
          THEN
             proc_response := 0;
       END refresh_all_mv;
    END pkg_refresh_mv;
    /

  • T.Codes for Sending material outside..?

    HI gurus
    Can anybody explain me , what are all the T.codes available in STA SAP related to Sending materials to outside like Drillngm/c, grinding m/c,..etc
    To do the some customer service work.. materials are not consumable, we wil use the material for some service work at customer place and get back to my company.
    Pls explain me the abt the T.codes
    Thanks
    sap-mm

    Hi,
    There are two ways of handling your scenario. If the material which you are sending is a valuated material, then please create a "Z"movement type with the valuation option unchecked, so that you can issue against a cost center, by treating customer as a cost center. This causes a decrease in the stock of the material. Again when you want to bring the material back to the stock, you can verywell reverse the earlier transaction. Apart from it, you can have a development unlike the delivery challans (DC's) in the legacy in SAP and send the materials on the same.
    IF the material is non-valuated, you can send them on "201" mvt type only, which does not affect the value of the stock at any stage.
    Hope this answers your query.

  • Tax code on plant  material and vendor combination

    Hi ,
    I have created Tax code in FTXP and I have maintained conditions in FV11 in combintaion plant,vendor and material combination along with Tax code but while creating PO Tax code is not defaulting automatically.
    Am I doing correctly or I should do anything else
    Regards
    Senthilnambi

    Hi,
    You have to specify the tax code manually, based on the condition record (FV11/FV12) for Plant, Vendor and material, it will populate the tax rates.
    If you want to default the tax code then maintain the same in ME11/ME12 - Purchase Info record.

  • Control Code field in Material master- Foreign Trade imports tab

    Hello Experts,
    I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
    Please help..
    Manish

    Normally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
    may be comes in a sale order.
    Regards

  • T.code for extend material master to  plant

    Hi
    Is there any t.code  (other than mm01) to  extend the material master to plants?
    regards
    sesidhar

    Hi
    RAj
    THANK U so much fro ur information ,,and i want extend to storagelocation...i think it is not possible in MM50 T.code
    in mm50 stor.loc option is not there
    regards
    sesidhar

  • Through T.Code- group of material transfer to one group to another group

    Hi,
       Plz help me for ex-i have some material in one material group,this same material transfer to another material group,what is the atransction code,plz urgent.

    Hi
    As per your I understand you are having some materials in one material group and some of the materials are having another material group Now you would like to maintain same material group in all the materials.
    If I am write then you can use the mass maintenance of the material master.You can use the transaction code MM17 to change material group
    If it helps award me points.
    Cheers
    Umakanth

  • I need to allocate low-level code to a material while creating in mm01..

    hi experts,
    In the material master record, each material is allocated one low-level code (field L.Lvl Code) which is determined by the bill of material (BOM) management program.I couldnt find this field in any of the tabs while creating the master record.So can u plz help me out to find this.
    Thanks in advance..

    Ramesh,
    You cannot create an LL code entry in MM01.  The purpose of MM01 is to create Material masters.  LL code is managed by the system, automatically, during BOM maintenance.  SAP does not give the users the ability to edit LL codes.
    It is unwise to attempt to change LL codes.  Improper entries in this field could lead to MRP results that will not meet your business requirements.  You should generally let SAP automatically manage this data for you.
    In the case where you believe you have an incorrect LL code, SAP does have some OSS notes that apply.  Start with [544489|https://service.sap.com/sap/support/notes/544489].
    Regards,
    DB49

  • Creating of T-code with default material type

    Hi all:
    As per client requirement I want a t-code like MMR1, MMF1 where the user doesnt have to select materia type. As i have copied material type from standard and created my own material type for e.g gold, diamond, silver.
    My client want it such a way, from a transaction they can directly create gold or silver material without selcting the type.
    Regards
    shegar

    Hi,
    Try to create Transaction variant for the T Code in SHD0(Check the T code to Create Transaction variant if i m wrong). U can give the Default value of  material type.
    Regards,
    Srinivas
    Edited by: Srininas on Apr 11, 2010 10:40 PM

  • Unspsc code configuration in Material master

    Hi Guru's,
    My client has using UNSPSC code heirarchy in the material master.
    There are four levels of heirarchy. I configured in the classification view of the material master accordingly to the heirarchy. Now I need to genarate a report based on the material group and that report should pull the characterstic and its value correctly at a specified heirarchy level.
    Is there any standard report to pull the heirarchy level for the material group?
    How can I achieve this
    Appreciate all the help
    Rrds,
    Shiva

    Hello Shiva,
    I'm looking for exactly what you stated above ( 2 years ago... ), but I'm a step behind you.
    Can you refer me to configuration doc for setting up material master based on UNSPSC code hierarchy? Do you do this through WG21, entering commodity level in Material group and then Class/Family/Segment in MG Hierarchy level field ?
    Also, did you find or receive any guidance on standard report to pull hierarchy level for material group ?
    Any guidance on this is much appreciated.
    Kim

  • MMBE-Sales order stock appearing under company code for the material

    Hi Frens,
    In MMBE, for a meterial, there is sales order stock lying in company code. Where to find the relevant documents for which the stock belongs to?
    Regards,
    CK

    Hi Jimmy/V Raj,
    V Raj, If I Right click on company code/Plant/storage location, I get Material Movement in inactive mode.
    Jimmy, Similarly if I click on Environment < Material Movements, I get a pop up message, List of material movements: stock lines can only be accessed from plant level downwards.
    This is because, in my case, stock is appearing only at Company code level.
    Hope I am clear in my requirement.
    Regards,
    CK

Maybe you are looking for