Code Page for HKSCS

Hi,
I want to know which code page should I use so that I can display HKSCS from SAP in my VB program.
Thanks,
Vicki

Its not easy to say like this. Your BASIS team is in the best position to answer this.

Similar Messages

  • Infopackage Idocs in status 2 - could not find code page for receiver system

    Hi,
    We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
    We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
    One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
    We did not encounter this issues on our previous migration test runs..
    Hope someone can help
    Christophe

    Hi,
    Thanks for responding. We finally found out what the problem was.
    We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
    Regards
    Christophe

  • IDoc Status 02 ( Could not find code page for receiving system )

    Hi All,
    I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
    Error description.
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed at runtime.
    3. The logon language is not installed in the target system.
    4. In the destination system, no logon language is maintained
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination  is working fine and your able to connect to target system and also check correct port is assigned.
    Regards,
    Vinod.

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • Could not find code page for receiving system

    Hi  Experts,
              When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
    Dave
    "Could not find code page for receiving system"

    Hi Praveen,
    The detailed error msg says the following.
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System response
    There are IDocs with incorrect status.
    Procedure
    Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
    Removing errors:
    How you remove the errors depends on the error message you receive.

  • BW Monitor error  Could not find code page for receiving system

    Hi All,
    Frequent BW Monitor error  - Could not find code page for receiving system
    I checked SM59 and every setting is fine there. Any other possibility ?
    Regards
    Srinivas

    The log updated in the status tab was:
    Error when updating Idocs in Business Information Warehouse
    Diagnosis
    Errors have been reported in Business Information Warehouse during IDoc update:
    Could not find code page for receiving system
    System Response
    Some IDocs have error status.
    Procedure
    Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
    Error handling:
    How you resolve the errors depends on the error message you get.

  • Error "could not find code page for receiving system"

    Hello Everyone,
    We are trying to load data and receive the message:
    Could not find code page for receiving system
    We have searched notes and this forum and can't find anything.  We also checked WE20 and could not find anything wrong.
    Can someone please elaborate specifically what this error is and where to fix it?
    Thanks so much.
    Colleen

    I just upgraded to NW 2004 SR1, and when loading data from a non-unicoded R/3 system to our BW unicoded system I experienced the exact problem.  Here is the resolution that is stated in note #613389 (it's not very clear in the note).
    - Language “EN” must be specified in sm59
    - Under Special Options -> RFC Bit Options
    Make sure that “Use Found Communication Code Page” has a check mark.
    Once this was done, the data loads started completing successfully.

  • Blended code page for 46C systmes

    Is it possible to convert an exisitng 46C system to Blended Code Page"?
    Also please advise what needs to be verified.
    Thanks,
    Bhaskar

    closing  - no answer

  • BW code page error for receiving sysem.

    Hi friends,
    We are getting following error in BW when We are trying to load data:
    "Could not find code page for receiving system",
    Our BW is Unicode and the R/3 is nonunicode
    Referred to the OSS notes 784381 and 613389
    We have checked we21, we22 and logical system and rfc connections and done the following bit checked :
    Language “EN” is specified in sm59
    Under Special Options -> RFC Bit Options
    Made sure that “Use Found Communication Code Page” has a check mark.
    We keep getting the following error...
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination BRQCLNT500, you want to determine the code
    page in which the data is sent with RFC. However, this is not currently
    possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed.
    3. The logon language is not installed in the target system.
    Please help   and I will definely reward points.
    Thnaks

    hi Brent,
    try to check the S10010 source system, rsa1->source system->righ click 'check'. also check the connection and authorization for S10010 in sm59 ? you may need to restore, source system S10010 right click 'restore'. hope this helps.

  • 'Windows-1252', 'Shift-JIS', etc. code pages are not supported encoding names exception in Windows 8.1 Phone

    Hi,
    We have already released our product for WinRT desktop and tablet versions.
    Now we are developing the same app for Windows 8.1 Phone. 
    We are supporting 'Windows-1250', 'Windows-1251', 'Windows-1252', 'Windows-1253', 'Windows-1254', 'Shift-JIS', 'GB2312' and 'Big5' in both desktop and tablet versions which uses WinRT API's.
    But in Windows 8.1 Phone version, i am getting 'ArgumentException' saying 'Windows-1252' is not a supported encoding name.
    Please help me with a solution or workaround to support the above specified code pages for Encoding.
    Regards,
    Balaji Reddy. M

    Does CP-1252 work?  If not, this page may help:
    https://social.msdn.microsoft.com/Forums/windowsapps/en-US/cf5ca6c9-72b0-4abb-9ef5-ff77226ec642/how-to-handle-unsupported-encoding-in-xml?forum=wpdevelop
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Could not find coding page for receiving system

    Hi,
    We have set up the configuration of RFC connections in SM59. We want to send an IDoc from a Unicode to a non-Unicode system. Message 'Could not find coding page for receiving system' appears. We activated some solutions described in OSS notes and added the required authorization to the communication user but it still doesn't work. What else can cause (solve) this problem?
    Regards, Jan

    Hello Jan,
    I had the following situation:
    After seup of an ALE/IDOC scenario with another SAP but Non unicode system sometimes the outbound PROJECT idocs failed with the error message "Could not find code page for receiving system". Status of Idoc was 02. When reprocessed some minutes later with report RBDAGAIN it worked.
    It turned out that for what'o'ever reason the connectivity was down for a very short time but long enough to get the Idocs failed.
    That's what I meant with the error text could be misleading.
    We solved this problem with a daily job with report RBDAGAIN for reprocessing.
    Regards
    Michael

  • Code page

    hello!
    can anyone please explain what is code page?
    I came across a problem, while opening dataset in text mode,
    i use the command transfer few times, but instead of getting few lines in the file i get a string of all the lines.
    I was told to use code page, is that the solution?
    regards
    yifat

    Hi,
    Code page means:
    Mapping of selected characters (character set) onto bit sequences. For example, Latin1 ( ISO-8859-1) represents a code page that contains all the characters required for Western European languages, while a Unicode character representation can display all the characters required across the globe. The way in which characters are displayed in an internal session is determined by the active system code page for the text environment in the internal session. Each code page supported by SAP is assigned an SAP code page number in the database table TCP00.
    Regards,
    Sesh

  • Regarding code page conversions

    Hi ,
    I have a query on code pages in unicode evironment.
    first of all sorry for big mail on my question
    There were a couple of issues when we have upgraded from 4.7 to 6.0 . These issues were mainly in the code page conversions from one code page xxxx to yyyy and the dataset transfers.
    the problem which im facing is trying to understand  exactly what is this code page doing in the back ground  and these multilingual conversions all about .
    there is a custom code page that my client has made in his landscape and now in majority of the interfaces we need to handle the code based on this code page .
    for ex in the open dataset statement we add legacy text mode code page p_code ignoring conversion errors message lv_message .
    i see some of  the characters especially scandinivian korean chinese and japanese giving some major problem during the file transfers to unix and ftp environment .
    case 1.
    now we are referring to a custom code page 9xxx . now take a character as ä  , now when i write a transfer statement
    with referene to this code page it is displaying as #  in unix path.
    now taking the hexa decimal value of this character if i search in the custom code page (tcode scp with the hexa value of such characters )  there is a value already present  in this code page  9xxx, now when i have a value maintained why am i gettina a #  in the unix server .. how to check the consistency /validity of this code page 
    case 2.
    some hungarian characters like o with a tilt on top cause conversion error dumps during the transfer . again the code page has this hexa value in it .
    why in this case  the conversion from 4102(basically utf-16)
    to code page 9xxx is failing . why it is calling 4102 in this case ?
    ignoring conversion error bypasses this strange chars (cxsycodepage*dump)  but how to hold the correct value at any point of time in the desired server i mean at last i need to transfer o with a tilt instead of a # .
    Please give some in depth  work around solution instead of some vague answers .
    Will appreciate your effort and time for this .
    Thnx much .
    Br,
    Vijay.

    hi
    I am facing same problem when reading the file from application server.It gives me short dump.Can u tell me how can i resolve the code page error issue.In dump analysis i am getting error "NOt able to covert code page '4110' to '4102'

  • Code Page Setting while extracting data using Generic Data Source

    Hi,
    Can anybody tell me about the Code Page setting used in Generic Data Source in SAP BW 3.5?
    I am extracting data from a Master Table using Generic data Source, but the data which is in Ukrane language is getting loaded as "#". Where do we set the Code Page for it?
    Regards,
    YK.

    To continue with earlier question, is there any particular setting for a master data, to load non english data as a text of master data?
    I want to load TEXT of a master in Ukraine language. I am extracting this text from the P table of same master (From Description Field). But TEXT is not getting populated whenever it is Ukraine language. English TEXT is populated correctly.
    Please share your experiences...
    Thanks,
    YK.

Maybe you are looking for