Code Page in FTP

Hi,
we are transferring a file to Remote server using FTP FM's is there a way where we can pass the code page to be used through any of the FTP FM's.
Thanks and Regards,
Raghavendra

Hi,
we are using ftp from an IBM Z-Series (EBCDIC) to a Unix machine.
in oder to tell the ftp to convert the code page we use:
ftp> quote site sbdataconn=(IBM-273,ISO8859-1)
before the put/get-Statement.
Find out the Codepages you need and try.
Martin

Similar Messages

  • How to output FTP file with Code Page 8400?

    Hi gurus,
           As we know we can use  GUI_DOWNLOAD to download fiel with specific Code Page,
      CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
         filename          = 'E:\TEXT.TXT'
    *      confirm_overwrite = 'X'
          codepage          = '8400' "Chinese
        CHANGING
          data_tab          = i_file
        EXCEPTIONS
         file_write_error  = 1
          OTHERS            = 24.
      IF sy-subrc EQ 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    But my question is how to output file into FTP server with specific code page 8400?
      call function 'FTP_R3_TO_SERVER'
        exporting
          handle         = p_handle
          fname          = p_filename
          character_mode = 'X'
        tables
          text           = i_file
        exceptions
          tcpip_error    = 1
          command_error  = 2
          data_error     = 3
          others         = 4.

    Thanks but it is not my anwser
    I want to output file to FTP Server with specific code page like
    GUI_DOWNLOAD

  • Open data set / code page

    Hello ,
    I am sending file to print server  and i am accounting problems with  special characters
    In first version of  program  ( please see the code below )
    "OPEN DATASET g_filename  FOR OUTPUT IN TEXT MODE ENCODING DEFAULT."
    The special characters l from German and French   alphabet were NOT printed properly  , and we had  some nonsense results . Other '"Normal "characters  like A , B... are printed without errors .
    To prevent this error i wrote new line of code for open data set ( below ).
    "OPEN DATASET g_filename FOR OUTPUT IN   LEGACY TEXT MODE CODE PAGE '4110'  IGNORING CONVERSION ERRORS."
    This was working only when FTP was NOT used  , when FTP was used i had  following short  dump.
    I am working in SAP release 6.0
    Please Advice
    SHORT DUMP Message :
    What happened?
        The conversion of texts in code page '4102' to code page '4110' is not
        supported here.
        The current ABAP program 'SAPLZPRN_AUTO_LBL' had to be interrupted because
         incorrect
        data would have been created by the conversion.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_CODEPAGE_CONVERTER_INIT', was
         not caught in
        procedure "Z_TRANSFER_FILE" "(FUNCTION)", nor was it propagated by a RAISING
         clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        Possibly, one of the codepages '4102' or '4110' - needed for the
        conversion - is unknown to the system. Another option is, that a Unicode
         codepage was specified for a file in LEGACY MODE, which is not allowed.
        Additional parameters for the codepage conversion (as , for example, the
         replacement character) might have invalid values. You can find further
        information under 'Inernal notes'.
        If the problem occurred at opening, reading, or writing of a file, then
        the file name was '/te/mm/labels/0488_20091208_051317_EC008119_01_001.dd'.
         (Further information about this file: " X ")

    Hi,
    Also check the character set supported by the Printer. Printer configuration should also be checked on SAP side to determine character set and code page using SPAD.
    Regards,
    Nishad

  • Code page translation problem

    Hi guys,
    I have the following scenario in XI:
         1. SAP R/3 creates a file in code page 1208 in AS 400
         2. The file is transferred via XI to the client's AS400 system. In XI this is a simple file-to-file scenario that reads from ftp location where SAP R/3 is found and copies the file into XI file system, it then runs an OS command after message processing (receiver file communication channel), that ftp's the file to the client's AS400.
         3. Our client then runs a translation CLP (I am not sure that local IT fully control this CLP) expecting to have as result the file in the correct CP. The correct CP is 813.
    The strange thing is that the ABAP program returns some files with Codepage 1208 and some others with 813. When the codePage is SAP R/3 is 813, the XI transfers correctly to the client's machine and all characters are then displayed just fine.
    However, when the codepage in SAP R/3 file system is 1208 then we cannot get the characters correctly in target system.
    We could not assume how the codepage changes in SAP R/3 system since the ABAP program remains the same.
    In XI I have used all the possible encodings: Text, Binary and all codepages.
    Any ideas??

    When I understand this right, the ABAP downloads the file in CP1208, then a CLP transfers this to CP813 and afterwards the file is processed by file adapter.
    I guess that the file adapter is sometimes too fast and processes the file before it is prepared with the CLP.
    Maybe it helps when the CLP renames the file after processing so file adapter and to set wildcards in the file adapter channel for the new name.
    When you set file to binara in sender and receiver and you have no mapping, the file will be transferred unchanged.
    Regards
    Stefan

  • Regarding code page conversions

    Hi ,
    I have a query on code pages in unicode evironment.
    first of all sorry for big mail on my question
    There were a couple of issues when we have upgraded from 4.7 to 6.0 . These issues were mainly in the code page conversions from one code page xxxx to yyyy and the dataset transfers.
    the problem which im facing is trying to understand  exactly what is this code page doing in the back ground  and these multilingual conversions all about .
    there is a custom code page that my client has made in his landscape and now in majority of the interfaces we need to handle the code based on this code page .
    for ex in the open dataset statement we add legacy text mode code page p_code ignoring conversion errors message lv_message .
    i see some of  the characters especially scandinivian korean chinese and japanese giving some major problem during the file transfers to unix and ftp environment .
    case 1.
    now we are referring to a custom code page 9xxx . now take a character as ä  , now when i write a transfer statement
    with referene to this code page it is displaying as #  in unix path.
    now taking the hexa decimal value of this character if i search in the custom code page (tcode scp with the hexa value of such characters )  there is a value already present  in this code page  9xxx, now when i have a value maintained why am i gettina a #  in the unix server .. how to check the consistency /validity of this code page 
    case 2.
    some hungarian characters like o with a tilt on top cause conversion error dumps during the transfer . again the code page has this hexa value in it .
    why in this case  the conversion from 4102(basically utf-16)
    to code page 9xxx is failing . why it is calling 4102 in this case ?
    ignoring conversion error bypasses this strange chars (cxsycodepage*dump)  but how to hold the correct value at any point of time in the desired server i mean at last i need to transfer o with a tilt instead of a # .
    Please give some in depth  work around solution instead of some vague answers .
    Will appreciate your effort and time for this .
    Thnx much .
    Br,
    Vijay.

    hi
    I am facing same problem when reading the file from application server.It gives me short dump.Can u tell me how can i resolve the code page error issue.In dump analysis i am getting error "NOt able to covert code page '4110' to '4102'

  • Infopackage Idocs in status 2 - could not find code page for receiver system

    Hi,
    We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
    We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
    One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
    We did not encounter this issues on our previous migration test runs..
    Hope someone can help
    Christophe

    Hi,
    Thanks for responding. We finally found out what the problem was.
    We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
    Regards
    Christophe

  • Code page issue - Unix file(s) content display in a report output

    Hi All,
    I am trying to retrieve file from Unix server and display in my report output.
    I have written code as below:
    OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      DO.
        READ DATASET filename INTO i_tab-line.
      ENDDO.
    CLOSE DATASET.
    1. Now i am able to display files of type .txt in report output but with line numbers above each line.
    How can i avaoid it! I want to display as it looks in AL11 view.
    2. If i am displaying files of type .PDF it is giving dump with below message:
    A character set conversion is not possible.
    At the conversion of text from code page '4110' to '4102' is not possible.
    - a character was found that cannot be displayed in one of the two code pages;
    - or it was detected that this conversion is not supported.
    How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
    Can anybody solve this this.
    I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
    Can anybody resolve these issues!
    Thanks in advance.
    Thanks,
    Deep.

    Hi All,
    Any resolution for above posted issue!
    Thanks,
    Deep.

  • How to change the default code page in SAP?

    My colleague tries to download a report in Excel but she is having some problems with the output as each of the lines are all included in one cell. When I download the same report, my output is fine and the columns in the lines are properly aligned in various columns in Excel.
    I noticed that her code page is 4110 and mine is 1160.
    4110     Unicode UTF-8
    1160     Microsoft 1252, Superset of ISO 8859-1
    As a workaround, I just asked her to modify the code page to 1160 everytime she downloads a report. I want to know how this setting is derived.
    My questions are:
    1) Is there a way to set the default code page?
    2) Is this a problem with the SAP version? If she downloads another SAP GUI, will the issue be gone?
    Thanks!
    Joey

    1, You can change the codepage in SAPGUI: Select the system => Properties => Others
    2, Could be, best is to have the same and most up to date SAPGUI for all

  • How to change a Code Page in SAP SCRIPT ?

    I have a specific requirement, would need your help :
    There is a <u><b>CODE PAGE</b></u> which is getting assigned to the <u><b>SAP SCRIPT FORM</b></u>. <i><b>For E.g : 1100 is generally used for SAP SCRIPTS.</b></i>
    I would like to know if there is a possibility to change the <u><b>Code Page</b></u> based on certain conditions ??
    Also i would like to know how and where is a <u><b>CODE PAGE and SAP SCRIPT FORM linked.</b></u>
    I have analysed that a <b>default code page</b> can be set in the <b>SAP LOG ON PAD</b> but not able to find the issues mentioned above.
    Kindly help me out with your valuable suggestions and solutions.
    Thankyou
    Brijesh.

    Hi,
    MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
    A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
    In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
    If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
    Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
    Greetings

  • SSIS Error Text was truncated or one or more characters had no match in the target code page

    I the same issue or something close.
    Except I have one Field (27) that get a trunacation error
    Error:
    Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
    The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
    Data looks like:Red Text is the field that is throwing the error!
    00000412,
    0000000011411001,
    0273508793,
    01,
    "RUTH           ",
    "EDWARDS             ",
    19500415,20080401,
    "N",
    04488013,
    "1",
    "F",
    365094,
    20080401,
    000472162716,
    "1447203880    ",
    43995202341210,
    00120.000,
    0010,
    00008.26,
    00004.96,
    000.00,
    00002.70,
    00007.66,
    0,
    "PROMETH/COD  SYP 6.25-10 ",
    "Y",
    "Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
    0000,
    "001C",
    610020,"WELLP1537",
    "O",
    "N",
    00,
    "D",
    "S",
    "G",
    "ID01V012008782",
    "TOM AHL CHRYSLER              ",
    "M",
    "M",
    "PBD $20/10+40%/20%            ",
    00008.26,
    "1184641367"

    I have found four things that I always check when I run into this problem.  I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source).  Check out my blog post, content repeated below:
    1.  Make sure to properly configure the "Flat File Source".  When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly.  I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated.  The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created. 
    2.  Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area.  This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...".  Once in the advanced editor, click on the "Input and Output Properties" tab.  Expand the "External Columns" folder.  For each field being loaded from the flat file there are some configurable properties.  Make sure that the "DataType" field is properly set for each field.
    3.  Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors.  On the same "Input and Output Properties" tab, expand the "Output Columns" folder.  For those fields listed, there is a "TruncationRowDisposition" property.  By default this is set to "RD_FailComponent".  This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur.  Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
    Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
    Note:  I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened.  For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
    4.  The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode.  Click on "Project" on the top menu and select "Data Imports Properties...".  Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
    Working with data from flat files can sometimes be difficult in SSIS.  By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages.  Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process.  If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
    Let me know if this works!
    Check out my blog!

  • What if a person no longer has access to the house in which the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

    What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless.  I am caught going round in this loop - there's that one button, no other option.  Thanks in advance. 

  • Error synchroniz​ing with Windows 7 Contacts: "CRADSData​base ERROR (5211): There is an error converting Unicode string to or from code page string"

    CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string
    Device          Blackberry Z10
    Sw release  10.2.1.2977
    OS Version  10.2.1.3247
    The problem is known by Blackberry but they didn't make a little effort to solve this problem and they wonder why nobody buy Blackberry. I come from Android platform and I regret buying Blackberry: call problems(I sent it to service because the people that I was talking with couldn't hear me), jack problems (the headphones does not work; I will send it again to service). This synchronisation problem is "the drop that fills the glass". Please don't buy Blackberry any more.
    http://btsc.webapps.blackberry.com/btsc/viewdocume​nt.do?noCount=true&externalId=KB33098&sliceId=2&di​...

    This is a Windows registry issue, if you search the Web using these keywords:
    "how to fix craddatabase error 5211"       you will find a registry editor that syas it can fix this issue.

  • IDoc Status 02 ( Could not find code page for receiving system )

    Hi All,
    I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
    Error description.
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed at runtime.
    3. The logon language is not installed in the target system.
    4. In the destination system, no logon language is maintained
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination  is working fine and your able to connect to target system and also check correct port is assigned.
    Regards,
    Vinod.

  • 'Windows-1252', 'Shift-JIS', etc. code pages are not supported encoding names exception in Windows 8.1 Phone

    Hi,
    We have already released our product for WinRT desktop and tablet versions.
    Now we are developing the same app for Windows 8.1 Phone. 
    We are supporting 'Windows-1250', 'Windows-1251', 'Windows-1252', 'Windows-1253', 'Windows-1254', 'Shift-JIS', 'GB2312' and 'Big5' in both desktop and tablet versions which uses WinRT API's.
    But in Windows 8.1 Phone version, i am getting 'ArgumentException' saying 'Windows-1252' is not a supported encoding name.
    Please help me with a solution or workaround to support the above specified code pages for Encoding.
    Regards,
    Balaji Reddy. M

    Does CP-1252 work?  If not, this page may help:
    https://social.msdn.microsoft.com/Forums/windowsapps/en-US/cf5ca6c9-72b0-4abb-9ef5-ff77226ec642/how-to-handle-unsupported-encoding-in-xml?forum=wpdevelop
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

Maybe you are looking for