Code page of the receiving system cannot be found?

Hi,
I am sending Idocs from SAP ECC 6.0 System to Siebel System for message type ORDERS. All the idocs are failing and are in 02 Status.
We have already implemented OSS Note mentioned for this particular error, but still the error persists. So, can you one let me know what could be the reason why Idocs are failing and what needs to be done in order to avoid this type of error in future once again.
Raghuram.

Hi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos

Similar Messages

Code page of the receiver system could not be found".

Hi,
We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
What could be the reason for this error?
Because of this error all IDocs are getting stuck in XI.
Kindly help.
Thanks,
John

Hi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos

Keychain system cannot be found

There are several threads on this, and on my 2009 iMac running Mavericks I ran into many of the same obstacles to the standard remedies. I had a big crash when trying to update to Yosemite a few weeks ago (so I'm back on Mavericks), with lots of permissions problems in the highly-complicated resuscitation phase. I have done a CMD-R reboot, and repaired permissions (on the password-reset utility), checked various folders including my $HOME folder with CMD-I, looked in System Preferences -> Sharing to see that I had everything set properly, and used Disk Utility also to Repair Permissions. (Maybe not in that order.)
And then, days later, for reasons unclear I began to get the "keychain system cannot be found" message. It occurred when waking the computer from sleep, finding the wi-fi disconnected and not being able to store the password. I ran Keychain First Aid. No help. I checked the Info (CMD-I) screens for my Library keychain folder and subfolders, and all looked normal.
(Disk Utility still reports lots and by "lots" I mean thousands of unnecessary ACL permissions, which it says it repairs and then they're still there.)
It's highly inconvenient as I "SSH" in to my base computer over the InterWeb, which is strangely impossible when the base is offline.
I'm not sure about adding or making new keychains - the old one apparently will be preserved although some advisors say make a manual back-up first anyway. And apparently one can import "keys" from the old keychain to make things less onerous. But I couldn't quite deduce how far that rabbit-hold might lead, so still crashed around a bit, and found ...
... that my System keychain was locked. All of the Preferences selections were "unlocked", and the other keychains (login, local, and System Roots) were unlocked.
I asked my wife what she was doing, creeping around in my keychain when I wasn't looking, but I have to say that I believed her when she professed not to know what a keychain was.
So how it got locked I don't know. I did what I often advise but equally often forget: right-clicked the System keychain. There's an option of unlock it (or to lock it if it's already unlocked).
That still didn't work, although the non-self-logging-on WiFi was my only practical problem.
So, I deleted that one key, the one for my WiFi user password.
Somewhere in there of course I rebooted (and rebooted), whether necessary or not.
And that finally worked. It's only been a few hours, but I can log off, I can reboot, the computer can sleep, and I can turn the WiFi on and off manually - and it auto-logs back in.
I wonder if I'm reporting this too early. So far, so good.
Summary: I did all the usual stuff, outlined above, suggested in multiple other threads (e.g. 10.9 Mavericks and keychain issues), except that I didn't make any new keychains, but then:
in Keychain, right-clicked the System keychain and unlocked it;
deleted just my Wifi user-password key in the System keychain.
Hey presto! YMMV!
Hope this helps somebody.
Charles

As Eric Root suggested, I'm replying to myself. Several days have passed and my repairs are holding. Here's a partial and edited "re-post":
I found that my System keychain was locked. All of the Preferences selections were "unlocked", and the other keychains (login, local, and System Roots) were unlocked.
How it got locked I don't know. I did what I often advise but equally often forget: right-clicked the System keychain. There's an option of unlock it (or to lock it if it's already unlocked).
That still didn't work, although the non-self-logging-on WiFi was my only practical problem, so, I deleted that one key, the one for my WiFi user password.
Somewhere in there of course I rebooted (and rebooted), whether necessary or not.
And that finally worked. It's only been a few days as of this writing, but I can log off, I can reboot, the computer can sleep, and I can turn the WiFi on and off manually - and it auto-logs back in.
Summary: I did all the usual stuff, outlined above, suggested in multiple other threads (e.g. 10.9 Mavericks and keychain issues), except that I didn't make any new keychains, but then:
in Keychain, right-clicked the System keychain and unlocked it;
deleted just my Wifi user-password key in the System keychain.
Charles

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Receive error message, The iPod cannot be synced. The required disk cannot be found. iPod nano 6th Gen, all latest updates, Macbook Pro, with OS 10.6.7

Receive error message, "The iPod cannot be synced. The required disk cannot be found. This is a iPod nano 6th Gen, all updates on iTunes and iPod, Macbook Pro OS 10.6.7. This is getting frustrating. I have changed USB ports, cables, reset, restored and was able to sync one time in parts, not all songs at once. I have seen a lot of this same issue, will Apple please find a solution, nothing works, I think I wasted my money with this iPod. I have the iPod touch, iPod shuffle, 4th gen iPod nano, iPhone and iPad. This is the only device that has this issue.

I was actually able to investigate and solve the problem myself. After readng many posts, I found that someone else's tips worked for me:
Re: 30gb 5th gen. Probs syncing.
Posted: Oct 13, 2009 8:48 AM in response to: johnnyfrommars
Try running a disk check out the iPod using the tools provided by windows.
To do this:
1. Plug in your iPod and close iTunes.
2. Go to "My Computer". Click on the iPod drive once. Go to File, and then click Properties.
3. Go to the Tools tab. Under "Error Checking", click Check Now.
4. Check both boxes. One says "Automatically fix file system errors" and the other says "Scan for and attempt recovery of bad sectors". Place a check mark next to each of these options and hit Start.
The scan may take several minutes or more to complete, but once it has, go ahead and restart iTunes, and try re-syncing files to your iPod.
B-rock

Error in code page mapping for Source System

Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
Mayank

Our SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM

Standard Code Pages in Non-Unicode System

Our System is Non-Unicode System , Single Code page configuration and Standard Code Page ISO8859-1(Latin-1) is Active.
Is it only 1 standard code page ISO8859-1(Latin-1) WILL BE ACTIVE or also other code pages ISO8859-2,ISO8859-5,ISO8859-7,ISO8859-8,ISO8859-9 also be ACTIVE in the system , and it will call the code page if the installed Europe Language call for.
Because we require additional Europe languages to be support in our current non-unicode system.
Thanks & Regards,
Gopal

Hello,
please be more specific which application. As I know there is also Latin-2 support for EBP (non-unicode) while for CCM from release 2 SAP added Latin-2 support.
SRM is not translated much more from "big 5" languages, but there was effort to translate to Hungarian as I know.
HTH
Gordan

Error -2147024714 : Automation Error the operating system cannot run %1'

Post Author: greg.thompson
CA Forum: General
After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

Post Author: greg.thompson
CA Forum: General
After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Outbound IDOC not received at the receiver system.

Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohith

Hi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes.

Idoc not found in the receiving system

Hi Experts,
In the sending system idoc status is 03 (Data passed to port OK), but in the receiving system the idoc is not there. How to rectify this error?
Thanks & Regards,
Soumya.

Hi Soumya,
Check the RFC connections, becoz in the sending system once the IDOC is sent the status becomes 03 it does not check whether the IDOC has sent to the received system, if there are any errors before sending the IDOC it will not send and the status will be 01, so check the RFC connections at sending and receiving systems.......
Reward points if this helps............
Regards,
Ravi G

Receive message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)... "Error occurred while converting the file 'songname'. The required folder cannot be found." CD/DVD ROM is no longer recognized until restart.

Consistently receive the following message after importing serveral songs from CD into iTunes (latest ver 11.1.5.5)...
"Error occurred while converting the file 'songname'. The required folder cannot be found."
CD/DVD ROM is no longer recognized until computer is restarted.

I have the same problem. I recently moved my music from a Vista PC to a new Laptop with an external CD drive. It will copy one song from the CD and it will show in the Music file and then I get the message ' Error importing a CD - Folder not found'. I must unplug the CD drive and plug it back in. I have seen no fix for this problem.

Missing document items in Sales Order in the receiving system

Hello.
We're doing passing of message type ORDERS (ORDERS05) from one system to another. Idocs were posted successfully but we can't find the document items in the receiving system if we view a particular sales order in VA03. Document items are present in the sending system.
I checked segment E1EDP01 (document items segment) for the inbound idocs and found all items attached to the sales order but we can't see them in VA03 display.
Appreciate help on how to proceed/check this issue.
Thanks. =)

If you have verified that the IDOC was complete in the receiving system, I would use WE19 to copy the IDOC in the receiving system (or copy to a development instance of that system) and run the process in debug....someone will have to watch the process, I think and see what is happening to the VBAP table during sales order build.

Receiving Error : Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. while trying to create a new Customer.

Hi All,
We have set up a new Operating Unit in Oracle Apps. Now when I am trying to create a new Customer in that Operating Unit, I am receiving following error:
ERROR MESSAGE:-Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
We do have MO: Operating Unit and MO: Default Operating Unit set properly at Responsibility level for the Responsibility through which I am accessing this form.
Your help is appreciated!
Thanks in advance,
SKA

You can refer this thread and check your MO operating unit is set or not https://community.oracle.com/message/3937028 thanks

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it

When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?

The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article

Code page of the receiving system cannot be found?

Similar Messages

Maybe you are looking for