Code regeneration for function group MGAD

Hi,
I have added new fields into table MARA and structure BMMH1, after that using RMDATING i have generated code for function group MGAD...
now, i want to remove those newly added fields from MARA and BMMH1, deletion happend...but, still the code generated in function group MGAD is present...please let me know how to delete this code.
Regards,
Ram.

Hello,
Take a look at the following SAP Note :
Note 120104 - Deleting fields from structure CI_MMH1
I know the version of the SAP Note is probably obsolete but read the manual actions carefully.
We had the same error and used these SAP Note corrections in an ECC 6.0 system with success.
Succes.
Wim

Similar Messages

  • How to create a new request for function group?

    Hi Friends,
    My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
    Thanks,
    Kaarthick.V

    Hi Karthick,
    If you want to Change the request for your FG means,
    1. Go to SE80 ->  work bench ->  Edit object.
    Here you have the option two change the request.
    or If you want to create the Function Group means,
    Go to SE80 -> Select Function Group -> Enter name -> press Enter
    Thanks,
    Reward If Helpful.

  • User has no authorization for Function group SYST

    Hi,
    We are starting to make customisation to B2B application. I have just created a new project for B2B_XXXX application and deployed it on the server. When I run this custom application, I am not able to login using the same user that is working fine for the standard B2B application.
    Following is the error I am getting
    ERROR 1 - RFC_ERROR_LOGON_FAILURE: User INTUSER05 has no RFC authorization for function group SYST
    ERROR 2-  The application was not able to switch to a stateful connection......
    Strange thing is that the same user works very well for standard B2B.
    Any clue? All I have done is created a CUSTCRMPRJ for B2B ERP (SHRWEB, SHRAPP). Please help.
    Best regards,
    -Tarun
    Edited by: Tarun Bakshi on Nov 10, 2011 7:37 PM

    Hi Shanto,
    The problem is still occuring. Even If I give s_rfc authorisation the order is not being created.
    I compared the source code for b2b and b2b_custom application, I have pasted below the component info
    sap.com      CORE-TOOLS      7.00 SP14 (1000.7.00.14.0.20071210170909)      SAP AG      SAP AG      20080125132852
    sap.com      SAP_JTECHF      7.00 SP14 (1000.7.00.14.0.20071210172424)      SAP AG      SAP AG      20080125132853
    sap.com      BASETABLES      7.00 SP14 (1000.7.00.14.0.20071210170411)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEECOR      7.00 SP14 (1000.7.00.14.0.20071210172300)      SAP AG      SAP AG      20080125132852
    sap.com      JLOGVIEW      7.00 SP14 (1000.7.00.14.0.20071210160700)      SAP AG      SAP AG      20080125132853
    sap.com      SAP-JEE      7.00 SP14 (1000.7.00.14.0.20071210172039)      SAP AG      SAP AG      20080125132853
    sap.com      SAP_JTECHS      7.00 SP14 (1000.7.00.14.0.20071210172719)      SAP AG      SAP AG      20080125133813
    sap.com      BI_UDI      7.00 SP14 (1000.7.00.14.0.20071210170522)      SAP AG      SAP AG      20080125133909
    sap.com      BI_MMR      7.00 SP14 (1000.7.00.14.0.20071210170459)      SAP AG      SAP AG      20080125133230
    sap.com      UMEADMIN      7.00 SP14 (1000.7.00.14.0.20071210164800)      SAP AG      MAIN_APL70VAL_C      20080125140341
    sap.com      LM-TOOLS      7.00 SP14 (1000.7.00.14.1.20080124101556)      SAP AG      MAIN_APL70P14_C      20080125134809
    sap.com      SAP-SHRWEB      6.0 SP0 (1000.6.0.0.2.20080129095806)      SAP AG      MAIN_CRM70PAT_C      20110608153828
    sap.com      SAP-SHRAPP      6.0 SP0 (1000.6.0.0.2.20080128172843)      SAP AG      MAIN_CRM70PAT_C      20110608154506
    b2b_custom application has been created by using code from the following SCs that were added to the track
    SAPSHRWEB10_7-20003522.SCA
    SAPSHRAPP10_7-20003520.SCA
    SAPCRMWEB10_7-20003518.SCA
    SAPCRMAPP10_7-20003516.SCA
    SAPCRMDIC10_0-20003519.SCA
    STRUTS01_0-10003646.SCA
    SAPIPCMSA10_0-20003515.SCA
    SAPCRMJAV10_7-20003517.SCA
    SAPSHRJAV10_7-20003521.SCA
    TEALEAF00_0-20001451.SCA
    SAPBUILDT14_0-10003479.SCA
    Any help would be great...

  • User has no RFC authorization for function group.

    Hi expert,
    I am calling a new function module  from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesn’t have proper authorization like SE37 Transactions Code and others.
    But there is some more existing function module in the same application that is working fine without having above issues with same access.
    I am passing the USERID as input in the function Module and execute simply.
    So can you please tell me the Way to handle it?
    I will really appreciate your answer.
    Thanks
    Ali

    Hi Rali,
    I think,there is problem with ur JCO connection..
    Please check the following steps -
    1. Go to transaction SM59.
    2. Choose Create.
    3. Enter the following:
    RFC destination: SAPSLDAPI
    Connection type: T (Start an external program via TCP/IP).
    4. Choose Enter.
    5. Choose Technical settings and specify the following data:
    a. Select Registered Server Program as the activation type.
    b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
    c. Enter the gateway host and the gateway service of R/3 server
    d. If the system is a Unicode system, navigate to Special Options and select the option
    Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
    server.
    6. Save your entries.
    Now
    1. Go transaction SLDAPICUST.
    2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
    Host name,  port Number, user  and password -  and set this SLD server as Primary.
    Only the entry marked as Primary is active.
    Please check whether there is entryof r/3 server in  the j2ee server /etc/services folder.If no entry is there then add -
    R/3server   port/TCP
    in the service file.
    Please check the  r/3server service folder and host folder  - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
    Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
    I hope this will help you ...
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Thanks,
    Gunja
    Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

  • Getting msg 'Program names L... are reserved for function group includes'

    Hi all,
    When I try to create a SAP standard Include which start with L, I get the message which says <b>''Program names L... are reserved for function group includes".</b>
    I have already created two standard SAP FMs.
    Please let me know how should I go ahead and create the Include.
    Thanks and regards,
    Anishur

    Hi,
    When you create the Function group, then if you look at the Fucntion group in SE80, then tehre inlcudes will be created, for FORMS if it will create the includes, and for TOP it will create the include, for L also it will create the Incldue(L referefs coding of subroutines).
    So, goto SE80 and activate the Include directly, then you can write the code in that include
    Regards
    Sudheer

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • User has no authorization for function group SWRS

    Dear SRM Gurus,
    We are facing an issue u201CUser has no authorization for function group SWRSu201D.
    Hope the user has no authorization to access function group SWRS and this function group is saying that workflow substitution.
    Can you any one have any idea what scenario are we using Workflow substitution?
    Is there any Roles need to be assigned?
    I would be appreciating if you could let us know more detail on this.
    Thanks.
    Regards,
    Magesh Basavaraj.

    Hi,
       The authorization object is 'S_WF_SUBST' for substitute role..try to assign this object and check..
    Saravanan

  • No RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR

    Hi,
    I'm trying to build a connection between SAP TAO  2.0 and SolMan. I recevied following error message: for one of my user:
    2010-12-21 16:28:24:577 : ERROR   : SAPTAO.exe : Thread04 (SelfCheckWorker) : SAP.TAO.Common.Rfc.RequestListener.TaoCommonReqListProxy : SearchSoftwareComponents(): an error occured: SAP.TAO.Common.Rfc.SapAgentAgentException: CallBackend(RfcRequest): a call to the backend system failed: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> SAP.TAO.Common.Rfc.SapAgentAgentException: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> System.Exception: User GCRIBB has no RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR
    Please help. Thanks in advance.
    Subodh

    Hello ,
    You have mentioned you have received one of your user? rest of the users is it working?
    Looks like i also received this error message when i did not instlal my ST-400 ..TAO Agent..i saw the  same error message in the log.
    Did you follow the this note to install SAP TAO - agent  properly (OSS note - 1368112) ?
    When you did self check are you getting any warning messages?
    1440074 - Check this note also for RFC authorizations
    Good luck.
    Ram

  • No RFC authorization for function group HRXSS_SER

    Hi,
       after implementing portal (EP 7.0), when the end user tries to access the ESS functionalities, the following error occurs,
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    in default trace, i found the following error,
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: User AG1780 has no RFC authorization for function group HRXSS_SER
    when i give SAP_ALL access to this user, then everything is working fine, but i cant give so.
    help me regarding this...

    Hi Ajay,
    simply do what the exception tells you: provide RFC authorization in the backend for function group HRXSS_SER to user AG1780.
    Cheers, Anja

  • No RFC authorization for function group RFC2

    When I am trying to import RFCs/IDOCs from ECC to XI in the integration repository, I am getting this error:
    User has no RFC authorization for function group RFC2.
    Any input is appreciated.
    Thanks,
    tnv

    Hi tnv,
    I guess you have to use an authorization object S_RFC with parameters.. In your case, you would need to set
    RFC_TYPE=FUGR
    RFC_NAME=RFC2
    See this link
    http://help.sap.com/saphelp_nw04/helpdata/en/6b/af429b12e9214d9a2d6cba921b162f/frameset.htm
    Hope this solves ur problem!
    cheers
    Prashanth
    P.S Please mark helpful answers

  • SMD_RFC has no RFC authorization for function group SPF.

    Hi,
    http://pw200-3.fcc.XXXXXXX.com:50000/smd  ->Diagnostics Setup ->Setup Wizard - Step 1  receives an error message like . .
    The value of profile parameter login/accept_sso2_ticket could not be checked
    Attached the below error message
    << >>
      Sat Nov 08 12:19:07 2008 SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    Step SSO Details
    Found SID for SSO ACL entry : PW3
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
    SSO ticket certificate of PW3 was imported in ABAP PSE of localhost (client 001) : remove_certificate_failed
    The ticket certificate is already in ABAP PSE, but could not be updated. You might need to check whether the certificate is up to date in STRUSTSSO2
    The value of profile parameter login/accept_sso2_ticket could not be checked
    !! Exception : An exception occured during the execution of this function 'PFL_GET_PROFILE_LIST'.(cause=com.sap.mw.jco.JCO$Exception User SMD_RFC has no RFC authorization for function group SPFL.)
    Thanks
    Thirumal
    Edited by: Thiru Thirumal on Nov 8, 2008 4:33 AM
    Edited by: Thiru Thirumal on Nov 10, 2008 5:49 AM

    Hi All,
    Check the authorizations of user SMD_RFC as described in[ this guide|https://websmp106.sap-ag.de/~sapdownload/011000358700000178012009E/RCA_User_Adminguide_SP18.pdf], refer to section 2.3.3 [SOLMAN.ABAP.RFCCOM]: Internal RFC System User.
    Also check notes  1170859 and  1371222.
    1170859 - SMD_RFC: running RCA without SAP_ALL profile
    1371222 - Additonal authorizations for E2E RCA EhP1 SP20
    I hope this help.
    BR,
    Allam

  • UWL  : User J2EE_ADMIN has no RFC authorization for function group SYST

    Dear All,
    When I am trying to register the system in universal Worklist Administration, It gives the following error,
    System <>: Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc  eption:Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
       I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody  through some light on this....
    Helpful tips will be rewarded...
    Sanoj

    Sanoj,
    check these threads
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
    reward points if helpful

  • QM-IDI : User QMIDI has no RFC authorization for function group QIRF

    Hi,
    I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
    1) Download inspection lots from SAP
    2) Upload usage decisions and inspection lot results to SAP.
    Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
    I would appreciate any guidance on how to resolve this issue.
    Regards.

    i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

  • UWL: User MSSNO1 has No rfc authorization for function group SWK1

    Dear all,
    We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
    (connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
    Anyone know how to fix this?
    I am not too sure about the authorization part. Can someone guide me please?
    Thanks.
    Regards,
    Bryan.

    Hi Brain,
    Pls check this thread for solution
    Re: UWL and function group swk1
    Regards,
    Harini S

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

Maybe you are looking for

  • Is there a way to tell when the trash bin in iPhoto was emptied?

    I am a teacher. I lost some very important photos and was under the impression that one of my students deleted them because she was mad at me. I was confused about how she did this because the main trash bin was still completely full. I didn't think

  • IDOC WMMBID02 for Outbound

    Hi, I am trying to configure an outbound IDOC for GI/ GR. I was told to use WMMBID02 for this,  but it uses FM L_IDOC_INPUT_WMMBXY. Has anyone tried to use IDOC WMMBID02 for outbound? I want to use this for a particular GI with Material Document as a

  • PP CC 2014 crashes on export from PP

    Mac 10.9.3, using PP CC 2014 . . . export crashes from PP (straight export, not via media encoder). Export via media encoder works, but the audio is jacked up (music track had some duplicate frames/glitches on edit points . . . which is no bueno for

  • 12.02 crash report

    i opened a file, updated text, closed, didn't save and hit this (the file is this 7600 pixels wide) 2008 Mac Pro 8core any clue? Process:         Adobe Photoshop CS5 [298] Path:            /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Con

  • Business system re-point

    Hi all, We need to re-point all the interfaces in our PI system from one R3 system to another so we need to change the Business system. We can not do it via transports as it is the only PI system that we have at the moment. Is it any way to do it aut