Code sample of sendRedirect using Web Dynpro NetWeaver 6.4

Hi ALL,
Im building a Web Dynpro application under Netweaver Developer Studio 6.4 and I need to redirect to another URL while the client click on a button.
I know it should be something like request.getServletResponse(true).sendRedirect("myURL");
But Im not sure how to get the request, or the response in order to apply the sendRedirect method.
Do you have any code sample or Web documentation I could use to redirect my Web Dynpro application?
Best regards,

Hello Jean-François,
To navigate to http://www.yahoo.com you have 2 options:
1) Call
WDClientUser.forceLogoffClientUser("http://www.yahoo.com");
2) Define Outbound plug with name Url in interface view, mark it as exit, define parameter Url with type String. Add usage of interface view in your view and add something like this in action handler:
wdThis.wdGet...InterfaceViewController().wdFirePlugUrl("http://www.yahoo.com");
Best regards, Maksim Rashchynski.

Similar Messages

How to display the data of CJ2C(T-CODE) using web dynpro abap

Hi all:
    How to display the data of CJ2C(T-CODE) using web dynpro abap.
    CJ2C used to display a Gantt Chart.
    Thanks.

Hi,
Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
On action place the code and Deploy the application
byte[] bytes = new byte[ 1024];
FileOutputStream out = new FileOutputStream( new File( <path in server>));
InputStream in = resource.read( true);
int len;
while( ( len = in.read( bytes)) > 0)
     out.write( bytes, 0, len);
in.close();
out.close();
Regards
     Vinod V

Reusable objects using web dynpro java...any suggestions ?

Hello All,
I want to create few Reusable objects using web dynpro java. Please suggest some scenarios.
regards
Mrinalini.

Hi,
I can suggest especially this one:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30d56578-f7e5-2a10-5ab5-8afc55d2e0e8
Some other hits you may find useful:
This guide mentions some tutorials about reusability:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ba2db0e5-0601-0010-9790-e271902f2c38?quicklink=index&overridelayout=true
Here
Web Dynpro Java [original link is broken]
and here
SAP NetWeaver Composition Environment Samples Center [original link is broken]
you'll find other tutorials as well.
Best Regards,
Ervin

Problem in completing the TASK when using Web Dynpro Java and BPM

Hi,
I am using Web Dynpro Java and BPM.
i see my Web Dynpro View when i run the process.
Just that the task is not completing.
when i click on the Web Dynpro button to signal the completion of the event, nothing happens.
i have appropriately created events in both Component controller and Interface Controller and used the same in creating the Task.
a method in Component controller fires the event and a button click in the view calls this method.
i have successfully completed Donka Dimitrova's "SAP Netweaver Business Process Management-End-to-End Process Implementation Sample " but when i tried my own with slight modifications, it is not working !!!
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d07f3e88-554f-2b10-3cbf-ab8afea51b9f
regards,
-Amol Gupta

Hi Amol,
The way you described the things, I dont see any problems. Just to make sure that you are triggering the right event that you mapped as completion event for the task, try to cross check once again and see if the correct event is getting triggered. Also try to put some messages for debugging to see till where the control goes.
Regards,
Arafat

How can I open a popup after clicking in a table cell using Web Dynpro?

Hello,
I am using Web Dynpro to create an application and I would like to click in a table cell and then a popup with confirmation appears.
I already have a table with the information that is displayed in the browser. In fact, I just added a column with images that are print icons.
My problem is that I don't know how to implement the method to set the action: when clicking on the print icon, a popup appears.
Thank you very much in advance.

HI Rafael,
Please check the below sample code
To quickly create dialog boxes of a standardized layout (for example, for the confirmation of changes to current data) you can call the CREATE_POPUP_TO_CONFIRM method of the IF_WD_WINDOW_MANAGER. You do not need to create a separate window for this. The dialog box is created automatically by the runtime.
●      The CREATE_POPUP_TO_CONFIRM method creates an object of the type IF_WD_WINDOW; the dialog box can be created using its parameters.
method onactionpopup4_1 .
data: l_cmp_api          type ref to if_wd_component,
        l_window_manager   type ref to if_wd_window_manager,
        l_popup            type ref to if_wd_window,
        l_text             type string_table,
        l_api              type ref to if_wd_view_controller.
l_cmp_api        = wd_comp_controller->wd_get_api( ).
l_window_manager = l_cmp_api->get_window_manager( ).
insert `Data where changed` into table l_text.    "#EC *
insert `Do you want to save?`        into table l_text.    "#EC *
l_popup = l_window_manager->create_popup_to_confirm(
                text            = l_text
                button_kind     = if_wd_window=>co_buttons_yesnocancel
                message_type    = if_wd_window=>co_msg_type_question
                window_title    = 'Test: Popup to confirm'
                window_position = if_wd_window=>co_center )."#EC *
l_api = wd_this->wd_get_api( ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_yes
               action_name       = 'YES'
               action_view       = l_api
               is_default_button = abap_true ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_no
               action_name       = 'NO'
               action_view       = l_api
               is_default_button = abap_false ).
l_popup->subscribe_to_button_event(
               button            = if_wd_window=>co_button_cancel
               action_name       = 'CANCEL'
               action_view       = l_api
               is_default_button = abap_false ).
l_popup->open( ).
endmethod.
The SUBSCRIBE_TO_BUTTON_EVENT method of IF_WD_WINDOW assigns the actions to the appropriate buttons
Thanks
Vinay

How to save file in km using web dynpro abap

Hi Experts,
We have a requirement that file should be saved in a folder in km, the name of the folder should be the employee number.
Could you please tell me how to create folder with employee number in KM and store file in it using web dynpro abap.
Thanks and Regards,
Santhoshi.

Thanks Naga Raju Meesala.
How come all these methods are deprecated...getEP5User
Also, since I am building a weddynpro DC, what is the proper way to include these jar files as Used DCs?
Now proceed in the same way with the variable PORTAL_HOME and add the following .jar files:
u2022 \lib\prtapi.jar The portal runtime APIs
u2022 \portalapps\com.sap.portal.usermanagement\lib\com.sap.security.api.ep5.jar The user management APIs of the Enterprise Portal 5.0 are deprecated, but still in use in SAP NetWeaver 04
u2022 \portalapps\com.sap.netweaver.bc.rf\lib\bc.rf.framework_api.jar KM Repository Framework APIs
u2022 \portalapps\com.sap.netweaver.bc.rf.service\lib\bc.rf.global.service.urlgenerator_api.jar Repository Framework Utility: URL Generator
u2022 \portalapps\com.sap.netweaver.bc.sf\lib\bc.sf.framework_api.jar Repository Framework: Repository Services
u2022 \portalapps\com.sap.netweaver.bc.util\lib\bc.util.public_api.jar Repository Framework Utilities

Deletion of data of R/3 table using Web Dynpro

Hi Experts,
I have to delete some records from R/3 table CATSDB using Web Dynpro form. I am using BAPI_CATIMESHEETMGR_DELETE for this purpose. Can you please let me know the steps to accomplish this exercise.
I have displayed the records of CATSDB using one custom made BAPI. Using this BAPI, I am able to display the data. I have created one button called "Delete Data" button on the form. I have called BAPIs using following code:
public void onActionDeleteData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionDeleteData(ServerEvent)
    wdThis.wdGetTimesheetCompController().executeBapi_Catimesheetmgr_Delete_Input();
    wdThis.wdGetTimesheetCompController().executeBapi_Transaction_Commit_Input();
//@@end
However, when I am selecting the record and trying to delete the record, record is not getting deleted. Can you please help me in resolving the issues? What is going wrong?
Regards,
Brian

Hi Ashwani,
I have checked the BAPI - BAPI_CATIMESHEETMGR_DELETE. I am unable to delete the record using even R/3 screen. For deleting the record, I have to provide following four parameters:
PROFILE, TESTRUN, RELEASE_DATA and AGENT.
I don't know what should be the value of TESTRUN, RELEASE_DATA and AGENT. I know only the value of PROFILE. From ABAPers, I have come to know that in order to delete the reccord I must provide the value of COUNTER. However, the BAPI, BAPI_CATIMESHEETMGR_DELETE is not asking me to enter the COUNTER.
Can you please let me know how to delete the record from BAPI using R/3 screen. After that I will try to delete record using Web Dynpro application.
Regards,
Brian

Getting and Printing A PDF Document From R/3 Using Web Dynpro

I would like specific information on getting and printing a document residing R/3 using web dynpro. My environment is Netweaver 04s SR2, an it will not include ITS or the ABAP stack. It connects to remote R/3. I will not be using Adobe Interactive Forms.       I only need get/render/print the doc. My question is in 3 parts.
1) Getting the PDF from R/3
     a) In terms of the RFC ABAP module, how should it return the pdf (a table?)
     b) How should the document be stored within the Component Controller context
         for display.
2) Converting the R/3 returned binary into a form that is renderable within
    Web Dynpro. (Does the Form UI Element Require it to be converting and if so
                          what is the best way to do this)
3) Printing the PDF from the corresponding iView in the portal. (If I am using the
    form ui element to display it, how can printing be initiated in the portal)
Thanks

Hi,
In webdynpro there s a fecility to convert the general data to PDF by uisng th InterativeForm UI Element.
This for u need to do the following things.
1. Need to configure the ADS(Adobe document services) in your VA(Visual Admin).
2. Once ADS is configured we can utilize the UI element Interactiveform It has contain the Adobedesigner by using this we can design the PDF and binding with the model nodes.
3. Develop the Function module in the r/3 side and import into WD side and those are created as Model nodes and we canutilize in the 2 step.
4.When u run the application u can display the pdf with how u design ur PDF form.
This is generally doing the PDF by using PDF.
Or do u think any other way post ur issues.
Thanks,
Lohi.

Making selective fields editable in adobe form [using web dynpro]

Hi,
I have displayed an adobe form using web dynpro application. But I have to make certain fields (not all fields) on this adobe form editable. I dont want to make this adobe form interactive because I dont have to save any data in database. The data entered in the editable fields will be saved as a pdf.
What I did so far:
1) The fields which I want as editable, I have given there type as "User entered/ optional" & for rest of the fields I have given type as "Read only".
2) In web dynpro, I have enabled the adobe
3) This is not making the fields editable.
4) If I write the following code in my webdynpro method WDDOMODIFYVIEW, then my data coming from adobe is not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
Any inputs regarding this??
Thanks & Regards.

Hi,
Like I had mentioned using the following code in my webdynpro method WDDOMODIFYVIEW, my data coming from adobe form was not getting displayed even though the fields get selectively editable.
*data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
*LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
*check first_time = abap_true.
*LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT('adobe').
*LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
*LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
So I kept this code & I also kept the Interface type "ABAP Dictionary based".
Additionally in Webdynpro, I used adobe form generated FM to get the adobe content & passed it to the "content" parameter of my adobe component in webdynpro.
Thanks & Regards.

Retriving data using web dynpro

I want to make simple application whic stores data and retrive specified fields using web dynpro. can anyone provide tutorial link to do this

Hi,
The solution to this is very similar to the reports that we write.
1. Create a context node from the dictionary element in the view of the webdynpro component.
2. Now you may be displaying/editing this data in the form of a table in the view layout. For this create a table in the layout and bind the fields of the context to the node you created from the dictionary table in the context.
3. In the layout you also want to have a button SAVE. on the event of this button. Write the code from code wizard where in
a. Read the context of the dictionary table from the context.
b. call method
CALL METHOD lo_nd_group->get_elements
RECEIVING
set = lt_ddictable.
c. update the database table using the internal table lt_ddictable.
Hope you find this helpul.
Regards,
Kinshuk

File Visibility in uploading the file using web DynPro java

hello,
i have gone through the tutorial " uploading & downloading the file using web DynPro java".
the upload functionalty is working fine. but i need to know thw path where these files are getting uploaded ??
Waiting for the reply..
Regards,
Viren Gupta

Hi Viren,
Are you are refering to the below tutorial for upload and download:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f?QuickLink=index&overridelayout=true
If yes, then answer is that the file is stored in the context of the application only as "com.sap.ide.webdynpro.uielement-definitions.Resource" object. Please read through the tutorial to understand the full process.
WD doesn't really upload to server automatically unless there is any explicit code written. All it does is to store the file in a temp context which you can access and write your own code to store it in a particular location.
Regards,
Mahesh

File Upload In DMS Using Web Dynpro ABAP

Hi,
I have a requirement to upload files in DMS using Web Dynpro. I have written the code by the hint of the following thread:-
scn.sap.com/thread/1865934
My code is uploading all files but when I try to view them from CV03N only txt files are displaying , Images and PDF files are not
showing there.
Please help me. It's urgent requuirement.
Thanks
Amit

TYPES : BEGIN OF zst_ts_raw_line,
             line TYPE orblk,
            END OF zst_ts_raw_line.
DATA : ls_draw TYPE draw ,
           ls_api_ctrl TYPE cvapi_api_control,
           ls_message TYPE messages,
           lv_documentnumber TYPE draw-doknr,
           it_objectlinks TYPE STANDARD TABLE OF dms_db_drad,
           ig_objectlinks TYPE dms_db_drad ,
           it_documentdescriptions TYPE STANDARD TABLE OF bapi_doc_drat,
           ig_documentdescriptions TYPE bapi_doc_drat ,
           it_originals_of_doc TYPE STANDARD TABLE OF cvapi_doc_file,
           ig_originals_of_doc TYPE cvapi_doc_file ,
           lv_storage_cat TYPE cv_storage_cat,
           lv_size TYPE i ,
           lt_bindata TYPE STANDARD TABLE OF zst_ts_raw_line," STANDARD TABLE OF zst_ts_raw_line,
           ls_bindata TYPE zst_ts_raw_line ,"SOLISTI1,"sdokcntbin ,
           ls_drao TYPE drao,
           lt_drao TYPE TABLE OF drao,
           lt_DRAT TYPE TABLE OF DMS_DB_DRAT,
           ls_DRAT TYPE DMS_DB_DRAT,
           lt_files TYPE cvapi_tbl_doc_files,
           ls_files TYPE cvapi_doc_file,
           l_string TYPE string.
DATA : ex_pf_ftp_dest           TYPE rfcdes-rfcdest.
DATA : ex_pf_http_dest          TYPE rfcdes-rfcdest.
DATA lo_nd_upload TYPE REF TO if_wd_context_node.
DATA lo_el_upload TYPE REF TO if_wd_context_element.
DATA ls_upload TYPE wd_this->element_upload.
DATA lo_nd_upload1 TYPE REF TO if_wd_context_node.
DATA lo_el_upload1 TYPE REF TO if_wd_context_element.
DATA ls_upload1 TYPE wd_this->element_upload1.
DATA lo_nd_upload2 TYPE REF TO if_wd_context_node.
DATA lo_el_upload2 TYPE REF TO if_wd_context_element.
DATA ls_upload2 TYPE wd_this->element_upload2.
*   navigate from <CONTEXT> to <UPLOAD> via lead selection
lo_nd_upload = wd_context->get_child_node( name = wd_this->wdctx_upload ).
lo_el_upload = lo_nd_upload->get_element( ).
lo_el_upload->get_static_attributes( IMPORTING   static_attributes = ls_upload ).
* navigate from <CONTEXT> to <UPLOAD1> via lead selection
lo_nd_upload1 = wd_context->get_child_node( name = wd_this->wdctx_upload1 ).
lo_el_upload1 = lo_nd_upload1->get_element( ).
lo_el_upload1->get_static_attributes( IMPORTING static_attributes = ls_upload1 ).
* navigate from <CONTEXT> to <UPLOAD2> via lead selection
lo_nd_upload2 = wd_context->get_child_node( name = wd_this->wdctx_upload2 ).
lo_el_upload2 = lo_nd_upload2->get_element( ).
lo_el_upload2->get_static_attributes( IMPORTING static_attributes = ls_upload2 ).
DATA : lv_file_name   TYPE filep.
ls_draw-dokar = 'Document Type'.
ls_draw-dokvr = '00'.
ls_draw-doktl = '000'.
ls_draw-dwnam = sy-uname.
lv_storage_cat = 'Storage space'.
ls_DRAT-doknr = 'Document Type'.
ls_DRAT-dokvr = '00'.
ls_DRAT-doktl = '000'.
ls_DRAT-dktxt = 'Test Document'.
ls_drat-dktxt_uc = 'Test Document'.
append ls_drat to lt_drat.
ls_api_ctrl-tcode = 'CV01N'.
ls_api_ctrl-commit_flag = 'X'.
ls_api_ctrl-save_flag = 'X'.
ls_api_ctrl-api_mode = 'X'.
ls_api_ctrl-no_update_task = 'X'.
ls_draw-filep = ls_upload-filename. "l_string. *
ig_objectlinks-dokar = doc type
ig_objectlinks-dokvr = '00'.
ig_objectlinks-doktl = '000'.
ig_objectlinks-dokob = 'LFA1'.
ig_objectlinks-objky = lifnr.
APPEND ig_objectlinks TO it_objectlinks.
CALL FUNCTION 'CVAPI_DOC_CREATE'
    EXPORTING
      ps_draw        = ls_draw
*• PF_STATUSLOG             = ' '
*• PF_REVLEVEL              =
      ps_api_control = ls_api_ctrl
*• PF_FTP_DEST              = ' '
*• PF_HTTP_DEST             = ' '
*• PF_HOSTNAME              = ' '
*• PF_CONTENT_PROVIDE       = ' '
    IMPORTING
      psx_message    = ls_message
*• PFX_DOKAR                =
      pfx_doknr      = lv_documentnumber
    TABLES
      pt_drad_x      = it_objectlinks
      pt_drat_x      = lt_drat
*      pt_files_x     = lt_files.
*      documentdescriptions = it_documentdescriptions.
IF sy-subrc NE 0.
    WRITE: 'no number'.
ENDIF.
IF ls_message-msg_type CA 'EA'.
ELSE.
    ls_draw-doknr = lv_documentnumber.
    COMMIT WORK.
ENDIF.
DATA lv_count TYPE i.
DO 3 TIMES.
    REFRESH : lt_files,lt_bindata,lt_drao.
    lv_count = lv_count + 1.
    ls_files-appnr = lv_count."'1'.
    CASE lv_count.
      WHEN '1'.
        ls_files-filename = ls_upload-filename. "wa_general-REF_FILE_NAME1. "
        ls_upload-filecontent = ls_upload-filecontent.
      WHEN '2'.
        ls_files-filename = ls_upload1-filename. "wa_general-REF_FILE_NAME1. "
        ls_upload-filecontent = ls_upload1-filecontent.
      WHEN '3'.
        ls_files-filename = ls_upload2-filename. "wa_general-REF_FILE_NAME1. "
        ls_upload-filecontent = ls_upload2-filecontent.
    ENDCASE.
    MOVE ls_files-filename TO lv_file_name.
    CALL FUNCTION 'CV120_DOC_GET_APPL'
      EXPORTING
*•PF_DIALOG        =
*•PF_DISPLAY       =
*       PF_FILE   = 'DO.TXT'
        pf_file   = lv_file_name "wa_general-REF_FILE_NAME1 "
*•PF_TYPDT         =
      IMPORTING
        pfx_dappl = ls_files-dappl.
    ls_files-updateflag = 'I'.
    ls_files-langu = sy-langu.
    ls_files-storage_cat = 'Srotage ID'.
    ls_files-description = 'DMS'.
    APPEND ls_files TO lt_files.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer        = ls_upload-filecontent "wa_general-ref_doc1   "
*• APPEND_TO_TABLE       = ' '
      IMPORTING
        output_length = lv_size
      TABLES
        binary_tab    = lt_bindata.
    DATA : lv_zaehl TYPE obzae.
    CLEAR lv_zaehl.
    LOOP AT lt_bindata INTO ls_bindata.
      CLEAR ls_drao.
      lv_zaehl = lv_zaehl + 1.
      ls_drao-orblk = ls_bindata-line.
      ls_drao-orln = lv_size.
*      ls_drao-dokar = ls_draw-dokar.
*      ls_drao-doknr = lv_documentnumber.
*      ls_drao-dokvr = ls_draw-dokvr.
*      ls_drao-doktl = ls_draw-doktl.
      ls_drao-zaehl = lv_zaehl.
*      ls_drao-appnr = lv_count."'1'.
      APPEND ls_drao TO lt_drao.
    ENDLOOP.
    CALL FUNCTION 'CVAPI_DOC_CHECKIN'
      EXPORTING
        pf_dokar           = ls_draw-dokar
        pf_doknr           = lv_documentnumber
        pf_dokvr           = ls_draw-dokvr
        pf_doktl           = ls_draw-doktl
        ps_api_control     = ls_api_ctrl
        pf_content_provide = 'TBL'
      IMPORTING
        psx_message        = ls_message
      TABLES
        pt_files_x         = lt_files
        pt_content         = lt_drao.
    COMMIT WORK.
ENDDO.

Doubts while doing example on WDJ-Using Web Dynpro Component Interface

Hi
I am doing the example mentioned in the PDF file WDJ - Using Web Dynpro Component Interface Definition.
In the PDF file its mentioned the following code inside onActionCreateDC1:
g_Usage.createComponent("com.sap.wd.childdc1comp.ChldDC1Comp");
wdThis.wdGetWDCompInterfInstInterface().passInfo(
"Created Child DC 1");
I have one query that what is com.sap.wd.childdc1comp.ChldDC1Comp?Is it the component name of DC or the package name of DC?
I have deployed the application.When i click on button Create Child DC1 i am getting follwing exception:
com.sap.tc.webdynpro.services.sal.deployment.api.WDDeploymentException: Failed to load deployable object part 'com.wartsila.test.ChileDC1Comp', type 'Component' of deployable object 'wartsila.com/DP_TutWDInterfaces'.
When i click on Create Child DC2 i am getting follwing exception:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException:Failed to create delegate for custom controller com.wartsila.test1.ChildDC2CompInterfaceCfg. (Hint: Is the corresponding DC deployed correctly? Does the DC contain the component?)
Can anybody tell how can i solve it?
Is it required to deploy the two child component also that is ChildDC1Comp and ChildDC2Comp?If yes then how to deploy these two child DC as when i am tryng to create application for these two component then default plug is showing blank thats why i am unable to deploy these child Dcs.
Thanks
Susmita

Hi Susmita,
Is it required to deploy the two child component also that is ChildDC1Comp and ChildDC2Comp?
Yes , u have to deploy both the components.
when i am tryng to create application for these two component then default plug is showing blank thats why i am unable to deploy these child Dcs.
U need not create an Application for deploying the component .Right Click on ur project --> Deploy.
The problem is with ur Component, while creating a Component u should have created a Interface view and default StartUp plug.
Just check whether u have Created the startup plug for ur interface view.
Open the controller editor of ur interface view --> Select Plugs Tab .
and in the plug tab , check whether u have Default Start plug (in Inbound Plugs Table).
if there is no Default Start Plug , then click the Button New to create a Default Plug .
in the pop up window -- select Stsrt Up and Give the name of the plug as "Default".
After doing this , select the default plug and Right click on the plug -->copy and Open the window Controller editor -- > select Plugs Tab --> check whether u have default plug (in Inbound plugs) in the Window controller .
if the plug is not there , then paste the plug in the Window's Inbound Plug Table .
Hope it helps
Thanks and Regards

Create portal user using web dynpro abap application

Dear All,
I would like to know is it possible to create portal user-id through web dynpro abap application.
My requirement is
> I have to create a web dynpro abap application. In the web dynpro abap application I have name email-id and phone number as entry fields.
> I will click on submit, one unique id will get created. This unique id will be the login id for portal.
I found how to create portal user using web dynpro java, but i could not find regarding web dynpro abap.
If it is possible to create the portal users using web dynpro abap pls share the code as well.
Regards,
Swapnil Indulkar

Hi swapnil,
I think by using BAPi.. BAPI_USER_CREATE1 you can create.
Please check this...
Create portal user from webdynpro abap
Creating user and assigning a group through code
user administration su01
How can i get the portal user id from logon ticket in the webdyn 4 ABAP
Cheers,
Kris.
Edited by: kissnas on May 21, 2011 8:47 AM

Using Web Dynpro WDUrlGenerator from within J2EE Application deployed on NW

I have two applications deployed on a NetWeaver Application Server 2004s.
1. A Web Dynpro application.
2. A J2EE Application
What I want to do is to be able to build a url to the Web Dynpro application from within the J2EE application. Obviously the problem is using Web Dynpro classes within the J2EE application.
So I edited the Java Build Path of the J2EE application to include the werbdynproservices.jar file and exception.jar files by extending ECLIPSE_HOME variable in the libraries section. I also checked them in Order and Export. I verified the built .war file and it does contain the two .jar files.
This was sufficient to get my project build and deployed, however the servlet in my J2EE application shows NoClassDefFoundException when I run it. My guess is there's more I need to do to get the WDUrlGenerator to run in my J2EE class.
Is this possible or is there a better way? I am trying to avoid the client having to modify a web.xml for each depployment.
Thanks in Advance.

This looks like what I want, but I am unable to test it.
I found the application-j2ee-engine.xml file under the <project-root>/gen_wdp folder. I then attempted to open it with the SAP EARDD editor. It opens with the Source tab selected. If I try to click the General tab I get an error saying:
"The source page has errors. Other pages cannot be used until these erros are corrected."
I see nothing wrong with the XML document. It's source is here:
<?xml version="1.0" encoding="UTF-8"?>
<application-j2ee-engine>
    <provider-name>local</provider-name>
    <modules-additional>
    <module>
      <entry-name>EVENTS_WorkflowNotification.wda</entry-name>
      <container-type>webdynpro</container-type>
    </module>
</modules-additional>
</application-j2ee-engine>
When I deploy the application, everything works fine. I was going to edit the XML document by hand, but of course there is no DTD listed so I don't know what's supposed to go in there without the Editor doing it for me.
Getting closer. Thanks so much.

Code sample of sendRedirect using Web Dynpro NetWeaver 6.4

Similar Messages

Maybe you are looking for