Code Snippet - Swipe Gesture to frame or Scene

Using the Timeline Navigation code snippets is real easy to use and understand, I am using the codes to " Click to next scene or frame etc etc and they work fine.
What I dont see in the code snippets is a easy to use " Swipe Gestures" Swipe to frame/ Swipe to Scene/ Swipe to next scene.
Im not a Coder. Everything I have learned is from watchng Lynda.com, Total training and alot of trial and error. When it come to reading long
lines of code my mind goes fritzy. And because of this I have learned to respect you guys who know coding.
I noticed that the you can add your on personal snippets into your library.
I will gladly pay someone to write me a simple Right to left swipe gesture Snippet that lets me navigate to a frame or Scene.
I hope this is something that adobe is planning to add to the Code Snippets Options soon.
Can someone please give me some input on how to make this happen.

What this is ... is a demo for an phone app.
They are doing the demo on a PlayBook.
There are 20 screens and the design looks like a BlackBerry Torch.
The bottom navigation takes the user back to screen One.
I have a button on Frame 1 of the timeline that runs across all 20 screens.
The Code Snippet for that button is:
HomeLeft.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
So .. if the user is on say ... screen 10 and clicks the "HomeLeft" button .. it takes them to screen #1.
That works.
All the navigation works up to screen 19.
Then ... when you navigate to screen 20 ... nothing.
The buttons react ... but the script is not activated.
I have looked EVERYWHERE for rogue code.
I even deleted the frames for screen 20 and then built it again.
Still ... it does not work.
If I could show you a screen shot of the timeline ... I think it would make more sense.

Similar Messages

Converting Frame files to PDF adds carriage return in code snippets

Our writing group is using FrameMaker 7.2 with Acrobat 9. The documentation we write includes code snippets. Conversion from Frame to PDF adds a carriage return to the end of any line of code. This causes any snippet containing a wrapped line to be incorrect if it is copied and pasted directly from the PDF. Does anyone knopw if there's a fix for this?
Thanks,
George

Dear Alexander,
Thanks for the reply.
In this I am using the FM 'CONVERT_ABAPSPOOLJOB_2_PDF'. I have checked the settings from SPAD that is also same in both servers for particular output device. But the patches are diffrennt in both the servers, the server from which layout is not coming properly having the high level patches in compare to the other server(which is working fine).

How do I make buttons within a movieclip play from a specific frame in scene 1?

Hi guys
I have a movie clip on the main timeline. This movieclip has buttons that I want to play different frames in scene 1.
At the moment, this is the code I'm using in scene 1.
learnclouds_mc.anna_btn.addEventListener(MouseEvent.CLICK, clickanna);
function clickanna(evtObj:MouseEvent){
gotoAndStop("annasstory", "Scene 1");
I'm getting the error below but have no idea what I should be doing.
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at Work_Life_Flash_Stage_1_fla::MainTimeline/frame4()
    at flash.display::MovieClip/gotoAndStop()
    at Work_Life_Flash_Stage_1_fla::MainTimeline/golearnclouds()
i hope somebody can help me!

If you only have the one scene, you do not need to include the scene argument in the goto method call.
The 1009 error indicates that one of the objects being targeted by your code is out of scope. This could mean that the object....
- is not in the display list
- doesn't have an instance name (or the instance name is mispelled)
- does not exist in the frame where that code is trying to talk to it
- is animated into place but is not assigned instance names in every keyframe for it
- is one of two or more consecutive keyframes of the same objects with no name assigned in the preceding frame(s).
If you go into your Publish Settings Flash section and select the option to Permit debugging, your error message should have a line number following the frame number which will help you isolate which object is involved.

Code Snippet issue?

So ... I'll try to explain this the best I can.
I have a flash file that is nothing more than a slide presentation.
I go from one slide to another using buttons.
There are global buttons (navigation: Next Previous, Home) ... and their are screen specific buttons (go to frame X and stop).
That's it.
For some reason ... navigation never works on the last slide.
None of the navigation, global OR local.
There is nothing different about this screen than any other screen.
It shares the same global navigation as the previous screens ... but once published ... the code snippets do not work.
When you arrive to the last slide ... it does nothing.
The buttons are active in the sense that the cursor changes on roll-over, but the action does not take place.
I have even tried to make that last slide seperate by giving it it's own set of buttons.
Still ... it does not work.
I have RACKED my brain trying to figure out why this would happen.
If I delete the last slide (say ... #20) then publish ... #19 stops working.
Is this a bug with the software?
The file is SO simple it stupid.
It could be done in html ... but it needed to be done in Flash to create a .swf so it could be displayed on a PlayBook.
The whole project is now a flop.
Does ANYONE know why this might happen? :|
I know this is hard to explain ... but there really is nothing to this file.
Thanks in advance.

What this is ... is a demo for an phone app.
They are doing the demo on a PlayBook.
There are 20 screens and the design looks like a BlackBerry Torch.
The bottom navigation takes the user back to screen One.
I have a button on Frame 1 of the timeline that runs across all 20 screens.
The Code Snippet for that button is:
HomeLeft.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
So .. if the user is on say ... screen 10 and clicks the "HomeLeft" button .. it takes them to screen #1.
That works.
All the navigation works up to screen 19.
Then ... when you navigate to screen 20 ... nothing.
The buttons react ... but the script is not activated.
I have looked EVERYWHERE for rogue code.
I even deleted the frames for screen 20 and then built it again.
Still ... it does not work.
If I could show you a screen shot of the timeline ... I think it would make more sense.

Trouble with iWeb code snippet for drop down menu

Hello,
So, I'm having a bit of trouble figuring this out and it goes beyond my knowledge, to be honest. I'm working on a website for someone and when viewed in Safari for Mac or iPad or even iPhone, it all works out great. But, when viewed in any other browser for Mac or Windows, the drop down doesn't display the "menu heading," only what should be the first drop down selection. Not only that, that page now becomes "unselectable" and more or less dead.
Here is what it should read, and does on Safari:
Rates and Hours
FAQ - Yoga
FAQ - Reiki
FAQ - Massage
On all other browsers, it displays the FAQ - Yoga option as the "title" and only displays the other two options. So, is this something that can be fixed in the code snippet or is what I'm seeing a more involved HTML issue that would require actual skills to fix? Any help or direction would be greatly appreciated because I'd love to get this knocked out and also pick something up in addition. If I have to edit the actual HTML pages themselves I could do that as well; I've got an editor and have done that for my own site when needed. Anyway, thank you very much in advance!
Her
<html>
<title></title>
<head>
<script>

</script>
</head>
<body>
<style type="text/css">

</style>
<form action="dummy" method="post"><select name="choice" size="1" class="combobox" onChange="jump(this.form)"
<option value="">Rates, Hours, Reservations</option>
<option value="http://yogareikimassage.com/MG/Rates.html*_top">Rates and Hours</option>
<option value="http://yogareikimassage.com/MG/FAQ_-_Yoga.html*_top">FAQ and Reserve - Yoga</option>
<option value="http://yogareikimassage.com/MG/FAQ_-_Reiki.html*_top">FAQ and Reserve - Reiki</option>
<option value="http://yogareikimassage.com/MG/FAQ_-_Massage.html*_top">FAQ and Reserve - Massage</option>
<option value="http://yogareikimassage.com/MG/FAQ_-_Personal_Training.html*_top">FAQ and Reserve - Training</option>
</select>
</form>
</body>
</html>

Here is what it should read, and does on Safari:
Rates and Hours
FAQ - Yoga
FAQ - Reiki
FAQ - Massage
No, it shouldn't and it doesn't. It should look like :
Rates, Hours, Reservations
Rates and Hours
FAQ - Yoga
FAQ - Reiki
FAQ - Massage
FAQ and Reserve - Training
Here's the correct part :
<select>
          <option value="">Rates, Hours, Reservations</option>
          <option value="http://yogareikimassage.com/MG/Rates.html*_top">Rates and Hours</option>
          <option value="http://yogareikimassage.com/MG/FAQ_-_Yoga.html*_top">FAQ and Reserve - Yoga</option>
          <option value="http://yogareikimassage.com/MG/FAQ_-_Reiki.html*_top">FAQ and Reserve - Reiki</option>
          <option value="http://yogareikimassage.com/MG/FAQ_-_Massage.html*_top">FAQ and Reserve - Massage</option>
          <option value="http://yogareikimassage.com/MG/FAQ_-_Personal_Training.html*_top">FAQ and Reserve - Training</option>
</select>
The <select> item was missing. And if you don't want the first line in the menu (Rates, Hours, Reservations) then don't enter it in the first place.
BTW, it's not a dropdown menu. It's a selection list in a form.

CS5: Code Snippet "Copy to Clipboard" Adds Spaces

In CS5:
When using the "copy to clipboard" in the code snippet panel on a custom snippet, it copies an extra empty line in between each line of code. The "add to current frame" option does not do this.
Bug?
Thanks,
Bruce

In CS5:
When using the "copy to clipboard" in the code snippet panel on a custom snippet, it copies an extra empty line in between each line of code. The "add to current frame" option does not do this.
Bug?
Thanks,
Bruce

Swipe gestures not working on iPad or mouse

The swipe gestures to move between windows, or access launch pad are not working. Cannot do secondary button on mouse. Track pad is also not working completely. Not sure what settings I may have fouled up, or just what happened.
Any suggestions?
Marty

bobmagan wrote:
It fires on both onactivate and onfocus. I had to do that to work on the Mac clients. Look at the code:
onactivate="get_select_list_xml1(this,$x('P507_FORMS'),$x('P0_LOGIN_SCHOOL_YEAR'),this,'REFRESH_REPORT_LAYOUT_LOV');" onfocus="if((typeof this.onactivate)!='function'){get_select_list_xml1(this,$x('P507_FORMS'),$x('P0_LOGIN_SCHOOL_YEAR'),this,'REFRESH_REPORT_LAYOUT_LOV');}"What about just
onfocus="get_select_list_xml1(this, $x('P507_FORMS'), $x'P0_LOGIN_SCHOOL_YEAR'), this, 'REFRESH_REPORT_LAYOUT_LOV');"If not, supply the following information:
<li>Full APEX version
<li>Full DB version and edition
<li>Web server architecture (EPG, OHS or APEX listener)
<li>Browser(s)/version(s) used
<li>Theme
<li>Template(s)
<li>Region/Item type(s)
and the <tt>get_select_list_xml1</tt> JS code.
Post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.

Code Snippets and actions?

I am using code snippets and trying to apply action to create a button for an interactive graphic. Every time I click on the "Click to go to frame and stop" it opens the actions window in which the coding appears for a brief second then all of it completely disappears so it's an empty actions window. Any ideas?

Have you tried contacting Adobe Tech Support? If there is a problem with your installation, Adobe Tech Support folks are the most likely folks to be able to help. (just to clarify, these are user-to-user forums, not an Adobe Tech Support channel).

Controlling a video with swipe gesture

I'm trying to control a video with swipeleft/swiperight events to play/playback a video. It does not work with built in actions. Should I code something? Is there any sample to help?
Thank you.

Just in case this article triggers some ideas
How to add swipe gestures to video playback
Thanks,
Preran

Code Snippet Snag

Fairly new to Flash - when I double-click on a code snippet (in CS5 or 5.5) the OUTPUT panel pops up and says:
"The following JavaScript error(s) occurred:
SyntaxError: missing ) after argument list"
Tutorials make it look so easy. What am I doing wrong? Thanks in advance!

1. What do you mean "when I double-click on a code snippet"? Are you double clicking on the actual code in the Actionscript window, or are you double clicking on the "a" indicator in a key frame?
2. Are you using AS2 or AS3?
3. Can you show the code in question?

Serial port control -- what's this code snippet?

Hi, all.
I've just become active working with LabView, version 6.0i. And this because of a program which "suddenly" stopped working, with no changes made by anyone that I can see (yeah, likely story, right?).
In short, the screenshot which I'll include with this post is of one tiny code snippet buried deeply in the .vi which runs an X-Z positioning system. I'd like to know what people thing this code snippet does. I have my suspicions, but I can't believe that whoever wrote this code actually used it for this purpose!
The X- and Z-positioners which I'm using are controlled by separate power sources, and separate ports on the computer. The X-positioner is ultra-fine-resolution, and has an optical encoder. It's controlled by the RS-232 port on the computer, and it's meant to be moved only a little at a time. The Z-positioner is a bit more coarse, and usually moves quite a bit at a time. It's serial-port controlled.
The screenshot is of the portion of the code called "XMove" -- that portion of the code which controls the x-positioning stepper motor. Often, the Z-positioner is still running during this part of the code (the "ZMove" subroutine is called before the "XMove"), and then, after both parts of the positioner have stopped, the code should shut down the power to them, and update the position of the translation stage.
However, once the code gets to this portion (screenshot), that while loop just keeps running.
Here's what I think is happening (please correct me if I'm wrong!): The Z-positioner is run by the serial port, which, as far as I know, can be controlled by only one device at a time. Thus, this While loop does the following:
1) attempts to write the characters "1R" followed by a linefeed to port 0 (the applicable serial port on this computer);
2) reads how many characters are stored in the serial buffer;
3) reads all the characters in the serial buffer;
4) takes the first two characters from the string read;
5) compares these two characters to *R;
6) if the two characters are R, then the loop terminates and the code finishes.
As far as I can tell (I've probed many parts of this structure), the code fails when the "N" portion passes the number of characters in the serial buffer to the "R" portion -- it's always zero. It appears to me that the "W" portion writes to the buffer AFTER the number of characters is read (I wouldn't have suspected this unless I'd run it many times and monitored which steps were done in which order). This ain't right!
I found a similar question answered in the KnowledgeBase forum, but the answer to that one was that the serial port may have an "echo" mode. That doesn't change the fact that data is being from to the port before it's written, does it?
Is there a way to make sure that the "read" statement happens AFTER the "write" statement? Am I way off base with what this code snippet should do? And, most importantly, *** is this a good way to tell if the Z-positioner is done with its job? ***. Is this a standard trick to tell if a program is done with the serial port?
Thanks, all. I know the quandary of trying to debug with so few details, and not having the program in front of you. Any help is appreciated!
Sincerely,
Curtis Osterhoudt
Attachments:
VI_diagram.jpg ‏17 KB

I suspect someone did change it, but they just don't realize they did.
THe code snippet is an example of some very bad LV code! What you suspect is happeneing is indeed true. LV uses a data dependacy paradigm that says code execution order is dependent on data availablility. Data availability is determined by ythe rule that the output of a node or sub-VI is not available until the object completes.
In you snipet, the only node that has to complete before the read bytes at port and the write to port VI is the the constant port number constant. That means that LV can execute either the write or the check bytes at port VI's first. This is determined at LV compile time. If for some reason LV decideds to compile in the write before the check bytes at port, the
n the I/O may work as intended, BUT NOT POROGRAMMED!
For a quick fix, put the contant port number and the write VI in a single frame sequence structure. This way the read from the constant and wire operation must comlplete before the seq completes, therby forcing the read stuff to wait.
I hope this help,
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Working code snippet for JSSE 1.0.2

This code works only with JSSE 1.0.2. JSSE 1.0.1 has a bug I believe which give null cert chain
error when using client authorization.
Below is a java code snippet to create a SSL server and client sockets.
SocketsFactory.java
This class is an utility class which gets you the Secure Socket for server and the client.
It reads from the properties file.
public class SocketsFactory{
/** Creates a SSL client socket. It uses the properties obtained from the
* sslPropsFile to create the client socket.
* @param sslPropsFile The ssl properties file that contains information about the provider etc.
* @param host The host to connect to.
* @param port The port on which this socket should attempt to connect
* @throws IOException if there was any exceptions in creating the sockets or if the properties file
* was not found or corrupted.
* @return returns the socket that was created.
     public static Socket createSecureSocket(final String sslPropsFile, String host,int port)throws IOException{
          Properties props = readPropertiesFile(sslPropsFile);
          SSLSocketFactory factory = null;
          System.setProperty("javax.net.ssl.trustStore",(String)props.get("com.ibm.idmg.ssl.keyStore"));
          //Getting a secure client socket using sun..
          try {
               addProvider(props);
               // Set up a key manager for client authentication
               // if asked by the server. Use the implementation's
               // default TrustStore and secureRandom routines.
               SSLContext ctx = getSSLContext(props);
               factory = ctx.getSocketFactory();
          catch (Exception e) {
               e.printStackTrace();
               throw new IOException(e.getMessage());
          SSLSocket client =(SSLSocket)factory.createSocket(host, port);
          client.startHandshake();
          return client;
/** Creates a SSL server socket based on sun's implementation using JSSE. Uses the
* sslPropsFile to get the keystore used for validating certificates and their
* passwords.
* @param sslPropsFile The properties file containing SSL provider, key passwords etc.,
* @param port The port to which this socket should listen at.
* @throws IOException If the properties file was not found or it was corrupted or if there was any
* other errors while socket creation.
* @return the serversocket object.
     public static ServerSocket createSecureServerSocket(final String sslPropsFile,int port) throws IOException{
          Properties props = readPropertiesFile(sslPropsFile);
          String trustStore = (String)props.get("com.ibm.idmg.ssl.keyStore");
          System.setProperty("javax.net.ssl.trustStore",trustStore);
          //     Getting a sun secure server socket
          SSLServerSocketFactory ssf = null;
          try {
               addProvider(props);
               // set up key manager to do server authentication
               SSLContext ctx = getSSLContext(props);
               ssf = ctx.getServerSocketFactory();
          } catch (Exception e) {
               e.printStackTrace();
               throw new IOException(e.getMessage());
          SSLServerSocket socket = (SSLServerSocket)ssf.createServerSocket(port);
          socket.setNeedClientAuth(true);
          return socket;
     * Internally used function to read a provider from the properties and
     * add it as the current ssl provider. The properties should have the
     * property <i>com.ibm.idmg.ssl.sslProvider</i> defined. Otherwise
     * throws NullPointerException.
     private static void addProvider(Properties props) throws Exception{
          String provider = (String)props.get("com.ibm.idmg.ssl.sslProvider");
          if (provider == null)
               throw new NullPointerException("com.ibm.idmg.ssl.sslProvider is not specified!");
          java.security.Security.addProvider((java.security.Provider)Class.forName(provider).newInstance());
     * Internally used function to read a file and return it as java properties.
     * It uses java.util.Properties. Throws FileNotFoundException if the file
     * was not found. Otherwise returns the properties.
     private static Properties readPropertiesFile(final String file) throws IOException{
          if (file == null)
               throw new IOException("SSL Context File name not specified!");
          FileInputStream in = new FileInputStream(file);
          Properties properties = new Properties();
          properties.load(in);
          in.close();
          in = null;
          return properties;
     * Internal function used to retrieve a SSLContext object. It is used primarily
     * for creating SSL sockets that can authenticate each other based on the
     * keystores specified using the properties.
     private static SSLContext getSSLContext(Properties props) throws Exception{
          SSLContext ctx;
          KeyManagerFactory kmf;
          KeyStore ks;
          String password = (String)props.get("com.ibm.idmg.ssl.keyStorePassword");
          if (password == null)
               password = System.getProperty("javax.net.ssl.keyStorePassword");
          char[] passphrase = password.toCharArray();
          ctx = SSLContext.getInstance("TLS");
          kmf = KeyManagerFactory.getInstance("SunX509");
          ks = KeyStore.getInstance("JKS");
          String keyStoreFile = (String)props.get("com.ibm.idmg.ssl.keyStore");
          if (keyStoreFile == null)
               keyStoreFile = System.getProperty("javax.net.ssl.keyStore");
          FileInputStream in = new FileInputStream(keyStoreFile);
          ks.load(in, passphrase);
          in.close();
          in = null;
          //     All keys in the KeyStore must be protected by the same password.
          String keyPassword = (String)props.get("com.ibm.idmg.ssl.keyPassword");
          if (keyPassword != null)
               passphrase = keyPassword.toCharArray();
          kmf.init(ks, passphrase);
          ctx.init(kmf.getKeyManagers(), null, null);
          return ctx;
The Server properties file looks like this.
#     Specify the SSL provider here.
#     Using sun's reference implementation for testing..
com.ibm.idmg.ssl.sslProvider=com.sun.net.ssl.internal.ssl.Provider
#     Specify the keystore file that this ssl socket should use
com.ibm.idmg.ssl.keyStore=server.ks
#     Specify the password for this keystore file
com.ibm.idmg.ssl.keyStorePassword=servercanpass
#     Specify the password used to protect the keys in the keystore
#     Note: all the keys should have the same password
com.ibm.idmg.ssl.keyPassword=icanpass
The client properties file
#     Specify the SSL provider here.
#     Using sun's reference implementation for testing..
com.ibm.idmg.ssl.sslProvider=com.sun.net.ssl.internal.ssl.Provider
#     Specify the keystore file that this ssl socket should use
com.ibm.idmg.ssl.keyStore=client.ks
#     Specify the password for this keystore file
com.ibm.idmg.ssl.keyStorePassword=clientshouldpass
#     Specify the password used to protect the keys in the keystore
#     Note: all the keys should have the same password
com.ibm.idmg.ssl.keyPassword=canipass
Now to create the certificates..
Its a 5 step process
1) Create the keystore file.
     keytool -genkey -alias mohan -dname "CN=Mohan Tera OU=IS O=IM L=sanjose S=NY C=US" -keystore server.ks -storepass servercanpass -validity 180 -keypass icanpass
2) Create a self signed certificate. If you need to get it signed from
     verisign then you have to create a certificate request. For testing purposes,
     you can create a self signed certificate.
     keytool -selfcert -alias mohan -dname "CN=Mohan Tera OU=IS O=IM L=sanjose S=NY C=US" -keystore server.ks -storepass servercanpass -validity 180 -keypass icanpass
3) Export the public key from the keystore to a certificate file that is to be imported to the client keystore.
     keytool -export -alias mohan -file fromserver.cer -keystore server.ks -storepass servercanpass
4) Repeat the above steps for the client also..
     a)
     keytool -genkey -alias moks -dname "CN=Jennifer Poda OU=Javasoft O=Sun L=Edison S=NJ C=US" -keystore client.ks -storepass clientshouldpass -validity 180 -keypass canipass
     b)
     keytool -selfcert -alias moks -dname "CN=Jennifer Poda OU=Javasoft O=Sun L=Edison S=NJ C=US" -keystore client.ks -storepass clientshouldpass -validity 180 -keypass canipass
     c)
     keytool -export -alias moks -file fromclient.cer -keystore client.ks -storepass clientshouldpass
5) Import the certificates that were exported in steps 3 and 4c in client and server keystore respectively.
     keytool -import -trustcacerts -alias new -file fromserver.cer -keypass keypass -storepass clientshouldpass -keystore client.ks
     keytool -import -trustcacerts -alias new -file fromclient.cer -keypass keypass -storepass servercanpass -keystore server.ks
And voila you are all set to go..
Hope this explains to all the people who are struggling with JSSE..
Regards,
Moks

when i using your method in my code i get the following exception
pl. help me.
java.security.UnrecoverableKeyException: Cannot recover key
at sun.security.provider.KeyProtector.recover(KeyProtector.java:301)
at sun.security.provider.JavaKeyStore.engineGetKey(JavaKeyStore.java:103
at java.security.KeyStore.getKey(KeyStore.java:289)
at com.sun.net.ssl.internal.ssl.X509KeyManagerImpl.<init>(DashoA6275)
at com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl.engineInit(DashoA6
275)
at javax.net.ssl.KeyManagerFactory.init(DashoA6275)
at ClassFileServer.getServerSocketFactory(ClassFileServer.java:145)
at ClassFileServer.main(ClassFileServer.java:115)
Exception in thread "main" java.lang.NullPointerException
at ClassFileServer.main(ClassFileServer.java:117)

How do I create a drop down menu with Code Snippets and Flash CS5?

Hi
I am wondering how to create a drop down menu using the Code Snippets and CS5?
There are some older tutorials out there and it would be nice if someone could create an updated drop down menu tutorial, and it might be me doing this after I have figured out the best and easiest way to create one, but before that I need some pointers.
Thanks!
Have a great day!
Paal Joachim

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

2 finger swipe gesture in FF23 on mac

I updated my desktop Firefox to version 23.0 yesterday and my two-finger swipe gestures stopped working.
For a long time I have set in About:Config to browser.gesture.swipe.left -> Browser:PrevTab and browser.gesture.swipe.right -> Browser:NextTab.
Until version 22 there was no problem.
I checked some different settings and found out that with default values to go back and forward in history it works correctly.
I have FireGestures installed (which may affect the gestures) but I tried to uninstall/disable and the problem was still happening.
Thank you for any help

Tracked as [https://bugzilla.mozilla.org/show_bug.cgi?id=782429 Bug 782429]

Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Code Snippet - Swipe Gesture to frame or Scene

Similar Messages

Maybe you are looking for