Code structure of existing documents - rearrange?

Hello,
knows somebody a hint or a extension for Dreamweaver which
structuring the code in a existing document?
It seems that Dreameaver only structure the code for news
documents :( , if you open a old document all code lines are
beginning on the left site and so it´s hard to see some
structure.
Thanks for any tip!
Regards
switch

switch88 wrote:
> knows somebody a hint or a extension for Dreamweaver
which structuring the
> code in a existing document?
Commands > Apply Source Formatting.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

Copy and pasting a page in an existing document? Copy and paste functions are greyed out? Also tried extracting the page to copy but am alerted that an incorrect structure was found in the PDF file?

copy and pasting a page in an existing document? Copy and paste functions are greyed out? Also tried extracting the page to copy but am alerted that an incorrect structure was found in the PDF file?

What do you mean by "copy and paste a page"? What tool have you selected? Or are you just assuming you can select stuff and copy/paste as in Word?

Creating a new Web Intelligence document using OpenDocument (requires an existing document?)

We use the OpenDocument interface to embed the Web Intelligence viewer in our web application. One of the problems we're having is that the code appears to require a valid document ID, even if all you want to do is create a new document (passing the noDocument=true flag, so that the application opens with no document at all).
I've tried various permutations of the following, with no success, always getting this error message (An error occurred: Could not find the document)
E.g:
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true...
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true&iDocID=...
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true&iDocID=-1...
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true&iDocID=0...
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true&sDocName=...
http://bo-server:8080/BOE/OpenDocument/opendoc/openDocument.jsp?noDocument=true&sDocName=new...
It appears the only way to get OpenDocument to allow you to do this is to use an existing WebI document ID. That is to say you can't create a new document unless you already have an existing document to include in the call to the JSP.
This limitation appears to be artificial and only on the OpenDocument interface -- You can create new documents in Launchpad without having an already existing document to point to. Documenting the workaround for this, having people installing the product first make a webi and save it, then configuring it so it has read-only permissions (so it doesn't accidentally get deleted), then configuring our application to lookup the ID isn't the most elegant of experiences.
I was wondering if anyone had run into this before and/or if anyone at SAP could look into it? I'm hoping it's an easy limitation/bug to fix.
This limitation affects 4.1 SP4 and probably older versions of the OpenDocument interface. See also:
Embedding Java Webi Report Panel in Custom Application - Business Intelligence (BusinessObjects) - SCN Wiki
Thanks!

There is a feature request to request addressing this limitation here. If you're interested, please vote it up!
OpenDocument "New Report" feature from a Universe Identifier : View Idea

Condition type & tax code & does not exist

Hi,
I have a problem to find out the reason why i can not process documents which came via IDocs from Sales SAP system. The error is "Condition type & tax code & does not exist". Following places i have already checked :
1. FTXP - tax code for which error exists the same in both systems
2. Table A053 - Condition types for specific tax codes and country are created in both systems.
The tax determination is under billing and in Sales system it is ok, document is posted and when comes to our FInance system via Idoc it is in error even we have the same entries in the table A053.
Maybe someone knows what can be also checked ?
Thanks
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

IDoc error - Condition type & tax code & does not exist

Hi,
I have the problem with CANADA tax codes. I have a few documents sent from external SAP to different SAP. In the source system documents were posted. In the target system i have error "Condition type & tax code & does not exist". I have compared the tables A003 and A053 in both systems and the settings are the same for specific Condition type and tax code... So where to find the reason Idocs are in error ? The only thing which is different is validity from (in the source system is earlier than in the target but the docs are created after both validation start)...
I would appreciate advice.
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

Error " Tax Code V0 already exist" on MIR6

when I will post a document on MIR6, there appears a message " tax code V0 already exist ", that caused by what?

Hi,
To better analyse your issue could you please indicate the error number ?
Thanx & Regards,
Mauro

BAPI to edit BSID-ZFBDT / BSID-ZTERM of existing documents

Hi,
I'm looking for a way to edit fields BSID-ZFBDT / BSID-ZTERM of some existing documents, a bapi would be preferrable to a batch-input. Do yoo have some sample code for this?
Thanks in advance!

I tried with RFBIBL00 but I receive the message 'Transaction FB02 not supported'. Is it for creation only?
Could anyone please help me? How could I do this?
Thanks

How to find out, if a dynamic genereated structure already exists in DDIC?

Good morning developers,
can you help me with that above mentioned problem?
I'm about to write a report which manages to change tablecontrol(s) to alvgrids.
My current problem is, that i read all fields of a tablecontrol and generate its structure dynamically ( temporary just during runtime of the report, not stored yet ).
Now I have to know, if this generated structure already exists in the DDIC, or not.
If not, i have to create a type of my generated structure and store it in the DDiC.
I know that there s a FM called "COMPARE_STRUCTURE_DATA".
But i think i have to know the name of the existing structure in DDiC.
Is there also a way for a recursive search in ddic?
If not: when i read the fields of my tablecontrol from the DDiC, i read from ddic-table D021S. In its field "FNAM" it contains for example SFLIGHT-carrid ( <table><column> ).
I could split 'FNAM' into table and column. How do i search for the structuretype of a table?
Thx for your replys, post points waiting
Regards
Basti

Hello Bastian
All dynpro fields (including table controls) are either based on DDIC structures of program variables. Thus, the following coding will return you the required answer.
*& Report ZUS_SDN_RTTI_IS_DDICTYPE
REPORT zus_sdn_rtti_is_ddictype.
TYPE-POOLS: abap.
TYPES: BEGIN OF ty_s_line.
TYPES: field(3) TYPE n.
TYPES: flag(1) TYPE c.
" INCLUDE TYPE knb1.
TYPES: END OF ty_s_line.
TYPES: ty_t_line TYPE STANDARD TABLE OF ty_s_line
 WITH DEFAULT KEY.
DATA:
gs_line TYPE ty_s_line,
gs_knb1 TYPE knb1,
go_tabdescr TYPE REF TO cl_abap_tabledescr,
go_strucdescr TYPE REF TO cl_abap_structdescr.
START-OF-SELECTION.
go_strucdescr ?= cl_abap_tabledescr=>describe_by_data( gs_line ).
IF ( go_strucdescr->is_ddic_type( ) = abap_true ).
 WRITE: / 'gs_line is a DDIC type'.
ELSE.
 WRITE: / 'gs_line is not a DDIC type'.
ENDIF.
SKIP.
go_strucdescr ?= cl_abap_tabledescr=>describe_by_data( gs_knb1 ).
IF ( go_strucdescr->is_ddic_type( ) = abap_true ).
 WRITE: / 'gs_knb1 is a DDIC type'.
ELSE.
 WRITE: / 'gs_knb1 is not a DDIC type'.
ENDIF.
END-OF-SELECTION.
However, if a dynpro field is based on a type defined within the program the situation may be more complex if the type includes DDIC structures (as shown above). But I am sure you will master this obstacle.
Regards
Uwe

TS1702 my Mac is requiring me to update pages app before opening an existing document. I "updated" but it still says i need a newer version of pages to read.

My Mac is requiring the newer version of Pages to view an existing document created on the old Pages. I updated my current Pages app and it still won't open this document I want to view.

Mac is version 5.1
ipad version 2.2 (1259)

T-Code to view SAP Document no.

Dear,
Need a T-code to view SAP Document number created while SAP Stock Creation.
After creation through MB1C a number is generated & i need to know what is the process to get this Document Number.
Thanks in Advance.

hi,
You can check MSEG table to get numbers..
Or USe MB51 to get list of material document as per your selections on the initial screen...
Regards
Priyanka.P

Illustrator & Indesign CC (Windows) crashes when trying to open an new/existing document

I installed Illusrator & Indesign CC when they were released as I had a pre-existing Adobe CC account which I had previously downloaded Photoshop and Indesign CS6 with. When I try to use Indesign & Illustrator CC they both crash when you go to open a new / existing document. I also downloaded Photoshop CC and this works fine. I have phoned Adobe 6 times to try to resolve the issue, each time I wait on hold for an hour and they get told they will call back within 2-5 hours but this never happens.
Has anyone else had this issue since installing CC and found a way to resolve it?

Are Tahoma and Verdana fonts installed on your system?

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

ECC 6.0 Error : Tax code PA also exists.

Dear Gurus,
We have recently encountered the error in ECC 6.0 during the invoice
in which we did not encounter in 4.6C.
ECC 6.0:
We have created a PO with tax Code as "II". When we do invoice for this
PO using Tcode: MIRO, tax code "PA" is populated in invoice header from
the configuration & tax code "II" is populated in invoice item from PO.
When we try to post the invoice we encounter the error stating that
"Tax code PA also exists".
4.6C:
In 4.6C we can be able to post the invoice without any error for the
above mentioned scenario.Then we wrote this issue to OSS asking them help to resolve this issue.
SAP said that,
Behavior of system in ECC 6.0: is correct and they asked us to refer the following
attached note which explains the same that system should throw the
message FF812 if header tax code is not present in any line item.
371633 MIRO: Error message FF812
Regarding the behaviour in 4.6C in, this is due to missing of following attached note.754074 MIRO: Missing error message FF812
After the answer from SAP we concluded the following:
(1). Behavior of system in ECC 6.0 is correct, I mean triggering the error when the
tax code difference in header and item.
(2). Behaviour of system in 4.6C is wrong, since we missed out to implement the
OSS note.That's why it does not trigger any error message.

Question:
(1). Now the users encounter error in ECC 6.0 when they post the invoice, b'cas the header and item tax code is difference.
What is the best to way to overcome this issue.I mean without error how to post the invoice?..Your earliest help will be greatly appreciateble.
Thanks.
Cheerios
Thamarai Kannan MK

Hello, I know it's and old question, but I'm facing the same problem. Did you solve it ??
Thanks in advance,
María

How to find out the condition type of the tax code in the PO document

Hi friends,
My questions is how to find out the condition type of the tax code in the PO document.
When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

Hi,
Hope you have asked for select query..
select single knumh from a003 into wa_knumh
where mwskz = wa_itpotab-mwskz
and kappl = 'TX'
and aland = 'IN'.
select single kbetr from konp into wa_kbetr
where knumh = wa_knumh.
cheers,
Dep

Create new Equipment (t-code IE01) for existing asset

HI Expert,
I have an enquiry on equipment creation via t-code IE01 for existing asset. There are synchronization between Asset Master and Equipment Master which mean both sides will be updated during the creation and changes of master data.
I have create new equipment master via t-code IE01 and has tagged to the existing asset. However after save the creation, new inventory number was generated to the asset master and had overwrite the existing inventory no. Is it because of the synchronization or it is a system standard?
Your answer is highly appreciate.
TQ.

My configuration is "Direct Synchronization After Saving" for both master data (asset master & equipment master).
However, I did not assign the Inventory No Field in asset master as a synchronization with equipment master, so how come system can re-generate new inventory no and overwrite the existing inventory no in the asset master? and what the solution if we do not want system re-generate new inventory no in asset master since it has been effected on the printing barcode sticker for the asset.
Really appreciate your answer.
TQ.

Code structure of existing documents - rearrange?

Similar Messages

Maybe you are looking for