Code that call and change for the PO after GR

Hi All,
I'm doing an automatic outbound delivery creation after doing goods reciept. The ouput type should be triggered when the PO is being change. Does anyone know where on the programs called by the transaction MIGO is the PO being change so that I can tract if the output type is triggered when I do GR?

Hi Sai,
I suggest not to change the PO Currency once the GR and Invoice is Posted , As the Reports which fetch the PO value will go wrong if we do that.
PS. In ME22n System disables the Currency feild once GR and Invoice Is posted.
Thanks
Sudhakar

Similar Messages

'Voice Memo' changed for the worst after 8.1...

Apple has changed how the 'Voice Memo' app works. It no longer switches automatically to speaker volume when played. You must now enable it manually by clicking the little speaker icon (will turn blue) towards the upper right corner.
Pre iOS 8.1 (or earlier versions) installation:
1. Voice Memo would sound through speakerphone once play is engaged
2. When a headphone is plugged in; sound comes through headphone, when removed; sound comes back to speakerphone.
Post iOS 8.1 installation:
1. When played with no headphones, sound now comes through the earpiece enabling you to listen like while listening to a call.
2. No sound through speakers - will not come on unless you press the little speaker icon (turned blue) towards the upper right corner. Will override earpiece volume.
3. When headphone is plugged in, it will override both speaker/earpiece depending on what mode it was on
4. Unplugging headphone will not bring sound back to speakers but only to earpiece.
Too much work.

I did a hard reset by holding the two buttons down. Mine worked the same way as you described. How about unplugging the headphone? It will not default back to the last state, ie; speakerphone>headphone>unplug headphone>earpiece. As stated in this logical order, it will not go back to speakerphone but to earpiece.
My guess is that they've added the 'earpiece' feature therefore an icon is needed. But instead of for controlling the speakerphone, the icon should be for the earpiece, or AT LEAST automatically defaults back to speakerphone when the jack is free.
Honestly, I'd rather prefer it like before instead of having more steps to tinker with.

I have a ipod mini from 2005, it will only work on my charger. I did get a new ipod 4touch, how do i get the music to the new one if i don't know the password of the mini. My ex-husband set it up for me, i not aboout to call and ask for the password.

I have a ipod mini from 2005, it will only work on my charger. I did get a new i pod touch 4, how do i get the music from the old mini to the new touch. I have never put any music on it myself, my ex-husband did it all and has the password. I never new it. I'm sure not about to call him and I don't think he'd give it to me anyway. Please help!!!

I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store). However, there are third-party methods and utilities that can transfer from iPod to computer. If you do a Google search on something like "ipod transfer," you should get some links.
The simple software "lock" used on iPods should not prevent you from off-loading the song files. Once the song files are on your computer, you can add them to your iTunes library. Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
NOTE: For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen. The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

I want to cancel my subscription and change to the photographer plan, how do I do this? I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will have no choice to cancell my suscription

I want to cancel my subscription and change to the photographer plan, how do I do this?
I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will have no choice to cancell my suscription.
Thanks in advance

You need to cancel the present CC (in case of repurchase the cancellation fee can be waived off) & repurchase the plan that you want.
Please let me know if you would like to go for cancellation of the present CC via personal messaging.
Regards
Rajshree

I just bought a macbook pro and qualified for the free Mountiain Lion update. How do I download the software on my laptop now that I've received the password for the content code file.

I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you

marsrover25 wrote:
I recently purchased a macbook pro and qualified for the free Mountain Lion update. Now that I've received the very long content code from Apple, where do I go to enter this information? Is there a link within apple.com? This is my first apple computer so I'm not a proficient user. Thank you
Sign into the App Store with your Apple ID. App Store should be in the Dock.
Cheers
Pete

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

HT4623 I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with

I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

TS1292 i have an itunes card that when scratching off for the code some of the numbers rubbed off. This was a gift so i really dont want to ask for a receipt. Any suggestions?

i have an itunes card that when scratching off for the code some of the numbers rubbed off. This was a gift so i really dont want to ask for a receipt. Any suggestions?

Click here and ask the iTunes Store staff for assistance. Supply them with as much of the code as you can.
(97364)

HT1819 Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

[svn:osmf:] 11996: Updates and changes from the spec review for FMMLoader.

Revision: 11996
Revision: 11996
Author:   [email protected]
Date:     2009-11-19 11:12:19 -0800 (Thu, 19 Nov 2009)
Log Message:
Updates and changes from the spec review for FMMLoader.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/proxies/LoadableProxyElement.as
Added Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/FMMLoader.as
Removed Paths:
    osmf/trunk/framework/MediaFramework/org/osmf/net/ManifestLoader.as

Hi
I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
I have put a support email into Apple, but don't expect a reply any day soon.
The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
Do you mean, going back to the Folio Producer Panel, and building a whole new App?
This process certainly isn't for the faint-hearted!
HELP!

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference my self, how do I go about doing that? I have not open the packaging yet.

I was given a 16Gb ipad mini retina with cellular but I need more storage. We do not have the receipt as it is a gift. I like to swap for a 64Gb unit and pay for the difference, how do I go about doing that? I have not open the packaging yet.

Hi
Thanks for that. Yes, the ipad was purchased recently. I called Apple last Friday and they ask for the receipt. I wonder if anyone were able to swap their ipad for a larger storage in the past at the apple store without a receipt? 16Gb is such a small storage.

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
Hope this makes sense.

External HDD won't work.
You need something like this:
http://www.seagate.com/goflexsatellite/

Code that call and change for the PO after GR

Similar Messages

Maybe you are looking for