Code to print report not working

Dear All,
I have installed oracle 10g database and forms 10g on my laptop having o.s xp.
when i call report from forms it gives following error-
"REP-52266: The in-process Reports Server rep_aouni failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
code to call report from form is as under
DECLARE
RPT_URL varchar2(5000);
BEGIN
RPT_URL:='http://aouni:8889/reports/rwservlet?&report=D:\ADNANREP&userid=naseer/naseer@orcl&desformat=pdf&destype=cache&paramform=no';
WEB.SHOW_DOCUMENT(RPT_URL,'_BLANK');
END;
please help.....
thanks

Hi,
You installed developer suite first and then database?
Can you post you PATH environment variable here (my computer->Advanced->environment)
Regards
Yoonas

Similar Messages

Print Report not working in Run Time

Hello,
The Print Report vi doesn't seem to work in the runtime environment. To test it, I made a simple vi that prints the text "Test Page." It works fine (prints the test page to the default printer) on my development computer (as a VI and an executable), but the executable does not print on any computer that has the runtime environment only.
Any ideas to get this working would be greatly appreciated.
Thank you,
Tom S.

Problem Solved:
After uninstalling a previous version of Labview Runtime from the target machines and installing the newest version (which is consistent with my development environment) on the target machines, the Print Report.vi and all other report generation VI's I use seem to work fine.
Also important is to make sure that the lvrt.msi file on the development machine is up to date and consistent with the version of runtime on the target machines. This does not update automatically when upgrading to a newer version of labview (at least not when I updated from 6i to 6.02). It must be manually downloaded and inserted into the proper folder.
Thank you Ray at NI support.
Tom S.

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Redirected Printer is not working

Hello all,
We have a Windows Server 2012 R2 terminal server. We have set up two Lenovo thin clients to remote access this terminal server. The problem is that the redirected printer is not working on one of the thin client but works on the other one. I have made the
same settings on both of the thin clients.
The difference between these two thin clients is like following.
1. Printer: The one that is working is Canon printer and the one that is not working is HP printer.
2. They use different ISPs.
All other settings are the same. I did not find any error code from the event viewer too. The only thing that I have is this error message when I tried to print a test page. "Test page failed to print. Would you like to view the print troubleshooter
for assistance?" And when I click "Yes", it said I did not have the related service installed and I could not find the error code for this issue.
Does anyone have any ideas on this issue? Please share this.
Thank you very much.

Hi,
Thank you for posting in Windows Server Forum.
Based on your description it seems that there is issue with incompatible print driver. As you commented you can access for canon but not for HP. Please see that you have update version of HP driver is installed. If possible try to use RDS universal printer
driver and verify.
How to configure Microsoft RDS Universal Printing
Does this happen for any specific user or for all users? If this happen for any particular user then there might be issue with user profile got corrupt so need to clear user profile cache or delete it and re-login to check the result.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black ink cartridge on photosmart printer 7250 not working

the black ink cartridge on my photosmart 7250 printer is not working. I've tried everything. I've aligned the cartridges and tried reprinting several times to see if the ink cartridge will start printing. Everything has failed. Does anyone know how to fix this problem?

You're welcome, and thank you for the updated information
I will recommend that you follow the steps within this Fixing Print Quality Problems document first. If that however does not resolve the issue and the black continues to not print, please try manually cleaning the printhead follow the steps in this 'Missing or Failed Printhead' document for your printer.
If after both of those documents the black still isn't printing properly what I suggest next will depend on if your printer is in warranty or not. If the printer is still under warranty (use this warranty checker to find out) then please call our technical support team for further assistance. If the printer is no longer under warranty, you can try the printhead soaking steps from @Bob_Headrick.
Let me know how things go for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Printer is not working properly after I updated OS

My printer is not working after I updated my OS software. It will only print out pages as a mirror image. All the programs are not printing properly. Could really use some help fixing this issue.

What software did you update?
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Have you contacted the printer manufacturer tech support? Read the printer's user manual? Your printer drivers updated to match your updated software?

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Flex Print Job not working with custom component

Hi All,
I have to print pages with header, body and footer. So the thought process was to create a custom component fro header, footer and body. Header component is based on Box, Body is a renderer (which will have fix value of items - and will decide the number of possible pages) and footer is again based on Box.
But when i created a simple Custom component like this for header
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox xmlns:fx=http://ns.adobe.com/mxml/2009
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Declarations>

</fx:Declarations>
<mx:HBox>      <mx:Label id="testLabel" text="Test Container"/>
</mx:HBox>
</mx:VBox>
Then when i try to add this to FlexPrintJob, and save it as 'xps' to see the print output, i get error message that this file is in use or damaged.
    var myPrintJob:FlexPrintJob = new FlexPrintJob();
if(!myPrintJob.start()){
      return;
var header:Header = new Header();
header.width = myPrintJob.pageWidth;
header.visible = false;
FlexGlobals.topLevelApplication.addChild(panierPrintHeader);
myPrintJob.addObject(header);
myPrintJob.send();
FlexGlobals.topLevelApplication.removeChild(panierPrintHeader);
But this does not work and i get the above mentioned exception. Now when i not use the custom component and just have a label or HBox or anything on stage before the print functionality is invoked, it works fine. And this too haapens only if you have a mxml component, i tried by creating a new Label component using actionscript and then provide the same to the printJob, which did not work either. I need help on this, else i will have to take print functionality to server side(Java) which has some business implications, the reason why i am spending time on flex for printing.
Thanks and Regards,
Jigar
Looks like custom component print is not working fine with flex or i am doing something terribly wrong.
Looking forward for help.

Is there nobody in flex community who can help on this....
Looks like a toothless class that adobe actionscript team has provided, which is not liked across much

Html snippet is not working on iweb 9. i can't write a code, Html snippet is not working on iweb 9. i can't write a code

Html snippet is not working on iweb 9. i can't write a code, Html snippet is not working on iweb 9. i can't write a code

You don't get this window when you insert an HTML snippet on the page?
Click to view full size
If you don't try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
OT

Drill down report not working in 1og report

hi all,
Drill down report not working in 1og.
in 6i it working good but 10g not working .
plz help any one.
thanks

Hello,
For detailled instructions about hyperlinks :
Oracle® Reports Building Reports
10g Release 2 (10.1.2)
B13895-01
3.6.10.1.8 Creating a hyperlink using the Property Inspector
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#i1062802
Regards

Code to print report not working

Similar Messages

Maybe you are looking for