Code128 shows dots

in this new instance of adobe reader 11.0.6 the font code128CF show dot instead of barcodes... I have gone back to version 11.0.3 and it shows barcode.. can you please fix this?

When I open that file in Reader 11.0.06 I get a message
This means that the font is not embedded in the PDF document, and since that font is not installed on my system, the barcode cannot be displayed at all.
However, I have no explanation why this would work on an earlier Reader version.
How is this PDF created; can the barcode font be embedded into it?

Similar Messages

When browsing a new library that I created, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle the image appears. How do I get images to appear in the browser rectangles?

When browsing a new library that I created and exported onto an external hard drive, the browser shows dotted lines around grey rectangles, no images. When I double click on a rectangle, the image appears, but all the other rectangles remain empty - no image. How do I get images to appear in the browser rectangles? I am viewing this on a second computer (an older intel duo iMac), not the one I created the library on (a MacBook Pro). Both computers have Aperture 3.2.4 installed. When I return the external to the MacBook, all images appear in browser rectangles. What's happening on the iMac?

You may have a problem with the permissions on your external volume. Probably you are not the owner of your library on the second mac.
If you have not already done so, set the "Ignore Ownership on this Volume" flag on your external volume. To do this, select the volume in the Finder and use the Finder command "File > Get Info" (or ⌘I).
In the "Get Info" panel disclose the "Sharing & Permissions" brick, open the padlock, and enable the "Ignore Ownership on this Volume" flag. You will have to authentificate as administrator to do this.
Then run the "Aperture Library First Aid Tools" on this library and repair the permissions. To launch the "First Aid Tools" hold down the ⌥⌘-key combination while you double click your Aperture Library. Select "Repair Permissions" and run the repair; then repeat with "Repair Database". Do this on the omputer where you created the library and where you can see the thumbnails.
Then check, if you now are able to read the library properly on your iMac.
Regards
Léonie

Do not show dots for 'free' events in the calendar month view

I wish I could.... not show dots for 'free' events in the calendar month view. For an overview of when I have hard-scheduled events in the calendar it's pretty tedious and slow to go day -by day, and other views... Instead the dot in the month view... - why does it show even "free" events? Any ideas, tips?
Thanks!

Unfortunately there is no option to disable the dots.
<Edited by Host>

Chart showing Dots displayed name above it..

Hi,
Im trying to get a chart showing dots (and some name should be displayed above dot)...Can anybody telll me whats the name of that chart and mostly im asking u for a link of that particular type of chart..(ie. chart showing dots as well as displaying some name above dot)..
i will be very happy if you would give me the link for that type of chart..I have searched in googl,but I just got a Dotted chart, but there is no name displayed above dot...
Thanks in advance...

Maybe I am just stupid BUT I don't have a clue what a "Chart showing Dots displayed name above it." is. Could you elaborate?

Monthly view shows dots on days when I have nothing planned

At the beginning of each month, the monthly view of the calander shows dots on days that I have nothing planned. How do I delete?

Tap the rectangle over the 2 lines and make sure it no longer shows up in red. At this point, you should have only the month view, no daily appointments below. Now press on a specific day, and this will either:
1. Take you into the daily view with the hourly breakdown. If this is the case, tap the three horizontal lines at the top to get the list.
2. Take you directly to the list view

Calendar shows dot for event, but no event scheduled

For the month of Nov 07, my calendar shows a dot every day, indicating that an event is scheduled, even on the days when no events are scheduled. I've made sure outlook calendar is correct and synced repeatedly, yet the dots are still there. I've tried clicking on the days that erroneously show a dot, hoping I could delete an event, but no event displays. This happened before and after the latest update. Any help is appreciated.

When I click on the day it says "No Events".
I have people's birthday's that occur every year if that's what you mean by reoccurring, but who doesn't have that in their calendar?
I can take the date back to 1997 to way before I started entering appointments and it still shows the "dots".
The things I've read explain the "dots" mean I have an appointment on that day.
I appreciate the help so far. Solving this would be a great improvement for my calendar!
Thank you for your time.

Why does the calendar not show dots since the IOS 6 upgrade

Since I upgraded to IOS 6 the dots don't appear on the calendar when looking at the monthly view. Is there a setting for this that needs changing?

Thanks,the "start new conversations from" section in back but it still won't allow my to send texts. relevent problem discussed in this thread. +1 (1) (216)116-11 error invalid number

Month view Calender shows dots when there are no data

In the month view calender, you should only see dots where you actually have an appointment. I have dots where I have no appointments. I tried a reset and a total delete of data. When I go back to synchronising with Itunes, the dots came back. How can I solve that problem?
Thanks and regards
Fadel

Hi,
The Work Status related entries will be available in the table dbo.tblFINANCELock. Check in this table.
Hope it helps.

Calendar Shows Dots On All Dates

My calendar is syncing with Outlook 2003 with no problem at all, except for one small bit of strange behavior. In Month View, the little dots that appear to indicate dates with appointments appear on all of the dates, not only the ones with items. This makes it fairly difficult to do quick cursory scheduling at a glance. Is anyone else having this issue? Has anyone resoled it?

I'm also having this problem but I don't understand the solution you wrote / don't think it works with mine. My calendar has about 1-2 weeks worth of dotted dates when there are no events on those dates.
For example, today has a dot on it, but there is nothing in the calendar for today. I went back to Sept 21 2006 and there is NOTHING on that date either. How can I set the end date to be correct when there is nothing there?

Why does the calendar on my iPhone 4 not show dots since the IOS 6 upgrade?

Since I upgraded the ios on my iPhone 4 to IOS 6 the dots on the monthly calendar are no longer there. Can anyone tell me how to get them back?

I have this exact same problem down to every detail. I've gotten to the point where I almost want to soft-reset my phone on a preventative level every day at lunch time because I have already been late receiving several urgent messages (work and personal) due to this issue. I had iOS 8 on my iPhone 5 before I upgrade to the 6 and didn't have this problem - perhaps it is hardware/firmware related?

Calendar: Month View mode shows all days with "dots"

Hiya,
I've got a problem with my calendar on the iPhone showing dots (symbolizing an appt on that day) for every day of the current month. I don't have appointments on every single day, so the bug is really affecting my ablity to check the month at a glance. And if I scroll to the next or previous month the dots appear only on days with appts, like they're supposed to.
I've already reset the phone, used the on-phone erase settings/content, and resynced the device. I've done everything short of restoring it in iTunes. Has anybody ever encountered this problem before?

Here are a couple of previous threads that might help.
http://discussions.apple.com/thread.jspa?messageID=6887421&#6887421
http://discussions.apple.com/thread.jspa?messageID=6899121&#6899121
Hope this helps.

Calendar month view dots on every day...

I seem to have a dot in every day of every month in month view. I have seen pics of other folks who only have dots in the days where there is an event. So I am thinking there is something wrong with my sync.
I downloaded 7.3.1 iTunes, resynced, and even restored. Anyone else have this problem? Any ideas on how to fix it?

VOILA! Solved it. I was right, it was related to recurring appointments.
I kept going back on my calendar until I found a day that had no dot in it. Then I figured the first empty day that still showed a dot and worked backwards. I found a recurring appointment was causing the problem.
When I opened it up, I noticed that the appointment was from Mon, Feb 5 to Sun, Feb 4. It went BACK in time. It still showed as only one day, and the All Day button was ON. I changed the TO date to Feb 5 (so both FROM and TO matched), saved the appointment, and VOILA! Fixed. However, as I scrolled forward, I noticed dots started showing up in every day in the months from that point forward, and it was still fixed from that point on backwards. It turns out EVERY BIRTHDAY (every yearly recurring appointment) had this glitch. When I fixed a birthday, it fixed all the days between it and the next birthday. When I fixed them all, my Monthly view for ALL months now shows dots on days with events, and no dots on days with no event.
Sweet!

Gray Dots when printing in Pages/Numbers

When printing from Pages (v 5.0.1) and Numbers (v 3.0.1), there are tiny gray dots all over the page. How do I get rid of these?

I have the same problem. It doesn't show dots on screen or when I choose "Open PDF in Preview" from the Print dialog box, but when I print they still appear.
It also happens with Mail, Numbers and Keynote but not with TextEdit or Preview (unless I exported the document as a PDF from Pages or Numbers).
It is infuriating.

Dots on display in certain poistion

the ibook screen is showing dots in certain positions and the green and purple dots are annoying me and apple care ran out 3 weeks ago can anyone help

hi mark, this is another common problem, l had an ibook in for repair once and the screen had like 1,000 fluorescent blue dots. A proper repair would be replacing the screen but a low cost or should l say no cost solution is to move the screen. Does pushing the right bottom side of the screen FORWARD remove the pixels, try flexing the screen gently, the problem is the actual lcd electronics not any cable that can be replaced.
I know the ibook l repaired had the screens bezel coming away at the bottom right and pushing it forward stopped the blue pixels, he replaced the lcd but l salvaged it and glued it to the bezel fixing it

Show Dot11 Commands

Hi all,
Can somebody ,please, clarify for me what the command "show dot11 statistics client-traffic" shows to me? The output usually looks like:
xxxx.xxxx.xxx pak in 24289 bytes in 5050182 pak out 32230 bytes out 35936358
dup 47 decrpyt err 0 mic mismatch 0 mic miss 0
tx retries 3455 data retries 3455 rts retries 0
signal strength 62 signal quality N/A
But is the units for signal strength are dBm or mW? And why the quality is N/A? What values are better ? 60 or 19 (for strength)? So if anybody can provide me with an explanation for the last 2 lines it would be great. By the way, do you know where on Cisco.com all the "show dot11" commands get explained?
Cause, additional hard to understood output is "show dot11 associations" shows MACs "not related to any ssid" (how can it be in the first place?) or shows MACs which are do associated to (the only) broadcasted SSID but the IP is 0.0.0.0? Why and what does it mean?
Thanks in advance,
Alex.

First of all thank you for answering my question. On the other hand, look - this was the first place for me to go on Cisco.com. Unfortunately (and this is the very problem itself), for some odd and mysterious reasons there is no clear explanation for those commands on this or any other page on Cisco.com. In fact, the only (!) explanation for "show dot11 statistics client-traffic" is "Use the show dot 11 statistics client-traffic privileged EXEC command to display the radio client traffic statistics".
No single word about the output and it interpretation. That's strange as its sounds.
The same goes for why there are Macs which are "not associated to any SSID" in "show dot11 associations".
So, if anybody knows the answer for the previously posted questions - please post the answers. For my opinion it would be interesting for the whole community.

Code128 shows dots

Similar Messages

Maybe you are looking for