Codec for HDV to share between apple and pc??

our boss got us 2 G5s and a PC workstation, we can now only share movie files in uncompressed format between different platforms which costs a lot of disk space
is there a CODEC which can be used in both APPLE and PC that encodes HDV in relatively smaller file?
G5 Dual 2.7GHz Mac OS X (10.4.7) FCP 5.04

i'm sure there's codec that use RLE could be
lossless: ]
but this is not what i want.
i just need the codec that could be shared between
mac and windows and keep most of the quality of HDV
and compression ratio is close to HDV codec itself,
When analog signals are converted into HDV digital data inside the HDV camera, your video is no longer lossless. It's not lossless because HDV is based on MPEG-2, which is not lossless. So, I don't mean to insult you, but your comment is self-contradictory.
or may i ask is there a HDV codec which could be use
both in mac and windows?
HDV is a codec, so the answer is HDV. Or... As I said before, H.264 may be used to further recompress high-definition video.

Similar Messages

Do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use laptop. is there problem between apple and FB?

do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?

Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.

How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please?

Hi - I'm trying to sync iBooks on my Macbook Pro with iBooks running on my iPad. I have some pdf's download from the net I want to share between devices and I can't work out how to sync the two devices. Any help please? I'm running Mavericks

Thanks for your help Brij011 - much appreciated. Apologies as I'm a newbie but I've looked at the info for synching and I appear to have all the switches flicked on my iPad. Does the iPad and iBooks only sync in iCloud for purchases as I appear to be doing something wrong. I could sync ok when books was in iTunes but since migrating to Mavericks I think I'm doing something wrong!!

How can i get separate passwords between Apple and iCloud?

how can i get separate passwords between Apple and iCloud?

There the same account at this point so theres no way to segragate the password.
You could however make an icloud email address that is different then your primary apple ID that you use for messaging and itunes and apps stores but at this point you cant undo the password merge.

How do you file share between mac and pc?

i need to know how one can share files between a mac and a pc. my MBP is running os x 10.5.2 and my PC is running vista.
thanks!

Mac/Windows Networking in Leopard
The following articles outline how to set up networking between Macs using Leopard and Windows PCs:
Setting up a Windows computer to share files with Mac users
Setting up a Mac computer to share files with Windows users
Sharing with Windows computers
If you can’t connect to your Mac from a Windows computer
Sharing your computer with others on your network
More information is also available by selecting Mac Help from the Finder's Help menu and searching for the relevant terms such as "windows", "networking", "sharing", etc.
Also read:
Simple guide to Leopard/Windows Home Networking
Written by Intercepter121 and originally posted on the Apple Discussions here.
If your network complies to the minimum requirements described below you should be able to share resources without any need to enter commands in the terminal to modify configuration files in your mac.
Requirements
1. A decent router
2. Mac Os x 10.5.1 installed on your macs
3. Windows XP or Vista
4. Number of network devices <10
5. Some network printers or drives (NAS)
6. A decent ISP offering a good DNS service
<u>General Settings
If your router offers DHCP and any of the device has power saving features there is a risk that the IP addresses are renewed. This can be problematic as the devices keep changing IP addresses. As this is your network is strongly recommended to reserve IP addresses to the MAC (Machine Address Code) of the various devices so that they can power on and off and still keep the same IP.This simple suggestion will greatly improve the browsing of the local network.
Accessing Windows Resources from Leopard with no authentication
Windows
1. Check the settings of the PC and ensure the IP addresses on the local LAN are trusted
2. Activate sharing on the desired devices ensuring the shares are read and write. If you use Vista ensure password protected sharing is disabled.
3. Try to access the windows share from another windows computer if available to confirm no authentication is required
MAC
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go back into system preferences network. On the tab location click edit locations. Duplicate Automatic and call the new location Home. Now select the Home location and go into Advanced-WINS. In the workgroup field enter the same value that is on the other windows computers for example HOME. Now press enter then go back to the main screen. Select Edit locations and delete the location automatic. Now edit your location Home and rename it Automatic. This workaround is a leopard bug described here.
3. Give 5 minutes to allow all the other machines to broadcast their IP address and the other computers should appear on the left side of your finder window. You can now select the shares you want to connect. As no authentication is active if you are prompted with a user name just press OK.
The procedure to access a NAS is the same as above, just ensure permissions are set to files are read/write for anyone to avoid confusion.
NOTE: There is no need to activate SMB sharing if you don't want to allow the PC to read folders on your MAC
Troubleshooting
After you have followed all the steps you don't see any windows PC.
Identify the IP address of the machine you want to connect. In finder select Option+K and enter SMB://IPADDRESS. If you can connect you have a name resolution problem. Go into your router configuration and ensure that the option DNS assigned by ISP is selected and you don't have services like Open DNS in use and fixed IP addresses in that field. Apply the changes and reboot the router. You should start seeing windows PC in finder shortly after.
Your ISP DNS service is poor and you must use Open DNS or similar
If you are forced to use services like open dns you have the risk that the router propagates the DNS servers to your machines. As the implementation of SAMBA in Leopard effectively blocks the MAC to be a master browser for performance reasons you end in a situation in which tiger machines connect and leopard ones don't see a single share. Let's fix it.
1. Go into System Preferences->Network then advanced DNS if you see here the IP addresses of the open dns servers this is the case. Unfortunately you will be forced to change the hosts file.
2.Ensure you have reserved IP addresses to all your machines so that they always get the same IP.
3. Now login into your mac as administrator and go into utilities=>terminal.
4. Issue the following command sudo pico /etc/hosts
5. Now scroll down and enter all the IP addresses and computer names of any device you want to browse
6. Reboot your MAC
The windows devices will now appear in finder and you will be able to connect with Option+K.
You cannot access shares even entering the IP address
You have not reserved IP addresses to each machine. Go into your router LAN set up and make sure that is the case.
Accessing Leopard resources from Windows
1. Go into system preferences->security-Firewall check that the setting is not on allow only essential services. Recommended settings is allow access to specific
2. Go into System preferences->accounts and click on Guest flag the option Enable guest account to access shared folders
3. Now into System preferences->sharing select file sharing and then options here flag SMB and select the user that has to be logged into the computer when the share has to be accessed. Ensure that the folder you want to share has read/write or whatever permissions you like it to have set for Everyone
You should now be able to see your MAC in the windows network resources and access the shared folder with a double click without any password request.
Troubleshooting
You don't see any MACs from Windows
Check the firewall settings at the start of this post. Then go back to the Network configuration hit advanced and then TCPIP check is using DHCP and not a fixed address. Then check the sharing is set as above with SMB clicked. If SMB is not set you won't even see your mac from windows.
You see the MAC and the shared folders but you can't read or write on it
Ensure you have set the guest account to access shared folders. Then check on the sharing preferences that there is at least one folder with read permission for everyone. The classic case here is Dropbox that leopard sets as read and write for the user of the MAC but no access for other users. You try to click on drop box and receive an error but when you actually try to write a file you can do it. Check the permissions on the subfolders of the share as those permissions will prevail on the home shared folders
FAQ
You may want to do more complicated things, but first ensure you can actually share files without security in place so you can identify the root cause of your possible problems
I want to password protect my windows shares: once you have done the relative set up in windows vista and ensured you can connect from another windows machine you will need to use user name and password of the Vista user to connect.
I want to password protect my MAC shared folders: Go into user account and disable guest access to shared folders is no shared folder has to be accessed without password otherwise leave it checked. Create a new user for sharing (better than giving away your password) so that this user only accesses the folders you want to share. In System preferences network select file sharing SMB and flag only the new user you have defined. Then go back to the folder section and set the permissions you like on the folder you want to share for this newly defined user.
Good Luck

I burnt a dvd from a file I exported from quicktime using the share with apple and pc option. It was burnt directly from the finder. The dvd works perfectly on my mac, and also runs in my windows, but the sound in my windows pc is stammered.

This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.

Jon, how do I re-compress the Snapz data for dvd playback?
That depends on your specific work flow strategy. I normally perform the processing in two stages if editing is involved or in a single stage if I don't plan to trim, title, add a narration track, add special effects, and/or add filters to the Snapz Pro X captured screen data.
In the two-stage process you export the captured data to an intermediate low-compression, high-quality fomat. (This can be the default settings for Snaps Pro X or a more modern editing specific format like ProRes 422/Linear PCM depending on the codec components for which your system is configured and your personal editing preferences.) The Snapz Pro X intermediate file is then edited in the application of your choice and the results are re-compressed to your final target compression format.
In any case, whether you are re-compressing the data using QT 7 Pro, iMovie, GarageBand, MPEG Streamclip, Snapz Pro X, or similar third-party app that accesses the built-in OS X QT routines, the export process is essentially the same. Whether you use a "Movie to MPEG-4" or "Movie to QT Movie" export, you must export to a data rate limited, multi-pass H.264/AAC compression combination to take advantage of the "Optimize of CD/DVD" option. Specific data rate limits depend on the playback dimensions of the file you are creating, the minimum level of quality you will accept, and the playback speed of the hardware to be used. (I normally target 4X-8X settings for SD content but if you know the recipient has a higher rated optical drive and your content is HD, then you can use higher encode settings for improved quality.)
I captured the slideshow again in Snapz, and saved it as H264/AAC. Is this good enough?
If you did not specifically use the "Optimize for..." feature, then the file is automatically targeted for "Computer" playback which assumes playback is from an hard drive which has greater bandwidth/faster throughput than an optical media player. If the target display dimensions are resonably small, the the contextual nature of the H.264 video encoder may or may not be within the playback limitations of an optical drive usually depending on the encode matrix dimensions, graphic complexity of the source data, overall brightness of the scenes, and limitations you may have place on the target file—i.e., the larger the encoding dimensions, the faster the data date and the less likely the file will be compatible with optical drive playback without having to constantly interrupt playback to cache/rebuffer additional data. However, you can always tell the recipient that if this happens, he or she should simply copy the movie file from the CD/DVD to their hard drive for playback.
What now? Do I open it in Quicktime and use the "share for mac and pc", then right-click on it in the finder and "burn to disc?"
What you do next depends on how you plan to burn the file. The steps explained above allows you to create a file that is compatible with playback from an optical drive in a QT Player app but is not authored for playback from a commercial DVD Player. Your next step is to burn that file to an optical disc that can be read by your recipient's computer. I my case, I normally burn the disc using a hybrid (HFS Plus/ISO 9660) format which supports HFS Plus, ISO-9660, Rock Ridge, and Joliet with Rock Ridge file systems. How you do this is up to you. You can, for instance, use a third-party app like Toast or Dragon Burn to create a data disc; create/burn an image file with your Disk Utility app (this is a good option if you plan to burn several discs now and/or in the future); create a named "Burn" folder, drop the file to it, and press the burn button; or simply insert a blank optical media disc into you optical drive, change the default disc name to whatever you want, drop your file to the blank media's Finder window, and press the "Burn" button. (NOTE: Burn options may differ depending on the software installed on your system and/or the version of OS X under which you may be operating.)
Dont see any specs re playback from an optical disc drive? The slideshow is only 3 min long, and I want to avoid turning it into a video DVD using iDVD, iMovie etc, as the quality of the pictures and type degrades badly. Thanks for the help. Been struggling with this for weeks.
As noted above, this is an encode setting that only becomes active when you are targeting your H.264/AAC encode for multi-pass/data rate limited compression. When active, the "Optimize for..." pop-up allows you to select "computer" (targets playback from a hard drive), "CD/DVD" (targets playback from optical media), or "Streaming" (targets playback from a realtime streaming server) options. This option prevents data rate excursions from exceeding limits normally associated with each of the named types of playback. This option has nothing to do with the file system used to burn the media disc which determines which platforms/OS can read the disc and the file it contains.

Codec for hdv

hey guys~
i'm trying to open my hdv files and i'm missing codecs. which codec is necesarry for hdv files. thank you.

Yes, basically...
my settings are in hdv 1080i (easy setting, sequence setting, capture setting)
when i log and capture i see nothing, when i'm capturing from my cam i see nothing. i treid playing the mov file through qt(captured images) and it says i need codecs.. i'm really lost here

Iphone 5 keeps switching between apple and home screen?

why does my iphone5 keep switching between apple loading screen and home screen? I can't use it.

Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Common URL format for sharing file paths between Mac and Windows?

Hi -
I have to integrate several Macs into a Windows environment. We need to be able to copy and paste file paths to share between all machines. Is there a common URL format that can be used between the platforms?
On Windows, I have:
\\server\share\file
On the Mac:
smb://server/share/file
Thank you for your help,
Steve

On Windows you have what is known as a "UNC".
On the Mac, you have a "URL". It starts with the protocol to use "smb" then gives the path to the item using standard conventions.
UNC is Microsoft mainly.
The only way I know for Windows to use a URL is with an application like a web browser or ftp client.
On the Mac, you can use UNCs but they must be modified as follows.
In Terminal:
smbclient \\\\servername\\sharename\\filename -U username
And enter a password if prompted.
Notice that you must double up the slashes. This is due to how UNIX shells treat the backslash.
You will connect to the share, but it will only be in Terminal.

MPEG Streamclip rip - codec for FCE + QT viewing on Mac AND PC?

Based on the helpful advice of this forum, I am ripping a bunch of DVD's of home movies into a large number of discrete .mov files that I can (1) import into FCE for editing and (2) view directly and effortlessly using QT on both a Mac AND a PC (I want to send these files to others). Maintaining image quality is very important given the less than perfect MPEG 2 source material.
I am following the suggested process using MPEG STREAMCLIP, including trimming and light cutting of unwanted sections before creation of each file.
My question is what is the best export process and settings for my situation?. Given the less than ideal quality of the MPEG-2 source, I would like to avoid further degradation if possible. Choices:
1. EXPORT to .mov using AIC codec -- clearly the best choice for editing and QT playback on a MAC -- but unable to playback using QT on a PC without buying/loading the AIC software. This is a problem since I want the ability to give the .mov files to others and allow them play on a PC without instructions or the hassle of a software download.
2. EXPORT to .mov with another Codec -- but which CODEC? --which codec allows effortless playback with QT/ MAC and PC while retaining original MPEG-2 quality -- and allows for later editing in FCE?
3. SAVE AS .mov -- my understanding is that this copies the original MPEG-2 (after trimming and cuts) and eliminates transcoding. Is this accurate? If so, will it play effortlessly on a MAC and PC? Am I sacrificing anything when importing into FCE (other than the need to transcode from MPEG-2 into AIC)
Thanks in advance for the help.

Martin, I Exported my rip using MPEGstreamclip DV/DVCPRO-NTSC full quality, then exported QT Movie out of FC after editing a bit. Put it back to DVD using DVDSP and used Compressor due to tutorials I watched from Larry Jordon, saying I would get a better quality compression using compressor. I know you are probably scratching your head at this point saying, wait, FCE doesn't come with Compressor or DVDSP. At this time I'll have to admit, I have FCstudio but started out with Express and like the FCE forum better then the FC forum.
The setting in compressor I used are:
Name: MPEG-2 6.2Mbps 2-pass
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated file size: 2.72 GB/hour of source
Type: MPEG-2 video elementary stream
Usage:SD DVD
Video Encoder
Format: M2V
Width and Height: Automatic
Pixel aspect ratio: Default
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: Automatic
Selected 16:9
Field dominance: Automatic
Average data rate: 6.2 (Mbps)
2 Pass VBR enabled
Maximum data rate: 7.7 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
DVD Studio Pro meta-data enabled

PS roles for making object links between cProjects and PS

Hello to everybody!
Does anybody could give me a favour and tell which role I should grant to the user in order to allow him make object links between cprojects and PS elements from cProjects. I have already granted authorization to CJ01, CJ02, CJ03 and CJ20N transactions, but JA 027 == No authorization for action Display === error message still occurs. SU53 shows that everything is OK.
Thank you.

Hi,
I´ve the same problem, I´m in tx CJ20N but I don´t know how to add my user in Access Control List (ACL) in CJ20N
Could you explain me how I can do that?
thnaks a lot and best regards, Sapera

Standard XML schema for Vendor data exchange between SAP and other system

Is there a SAP standard way of XML schema that we exchange between SAP and other system? Please let me know.
Thanks.

See SAP Interface Repository (http://ifr.sap.com).
My proposal is to leave old SAP connectors staff and use SAP Exchange Infrastructure. There is a support of industry XML standards in XI 3.0 like xCBL.

What is going on between Apple and Sprint?

I have heard that Apple might not even let Sprint sell their iPhones. Is there any truth to this or is it just a rumor?
I also have a secondary question. I have heard the same thing about Apple and at&t. Is this true or just anothe rumor?

Unless and until Apple, AT&T or Sprint announce something officially, it is all just speculation, which is STRICTLY PROHIBITED by the Terms of Use of this forum.
Now, do you have a techincal support issue we can help you with? If not, please find a more appropriate forum in which to discuss your rumors.

Battery drain with ios6 apps crashing! google maps app is gone. The Apple version is like asking a blind man for directions! Awful. As consumers we are caught up in the squabbles between Apple and Google, and we pay the price.

Does anyone else have battery life problems with the iOS6 update? Some of my other apps crash constantly, bringing my reading or workflow back to the home screen. The new map App is a disaster! Is there an online petition to have Apple bring back the Google map app? It is like asking a blind man for driections! Addresses, postal codes, locations, area codes and phone numbers in the Vancouver BC area are consistently wrong! AUUUUUGGGHHHHHHH!

As someone who spends a lot of time writing reviews (for vidya gaems ;P) I enjoyed your review. I am also looking at getting a new phone soon (I am saving up to buy out on refresh). I was considering th next iPhone but from reading your review I may consider this device instead. What I need to know is this. When the phone is in a phone holder which you have in a car for example does the screen get pressed at the sides? I don't wan't to open up Waze put my phone in a holder and it get cancelled out by what it thinks is a button press. Also, is the screen goign to be scratched easy? I am guessing there is no decent screen guards yet. I did buy some screen protection liquid that was recommended on these forums and my lumia still got scratched by about an inch or so.

Codec for HDV to share between apple and pc??

Similar Messages

Maybe you are looking for