Codec not found. And other errors on fresh install.

I just upgraded to a new 8 core Mac Pro from a 15" Powerbook G4. I had been cutting some DVCPRO HD material on FCP 5.1 and installed it on the Mac Pro seemingly flawlessly. Now when I try and open my sequences in my (all material was stored on Firewire drives) I get the following two error messages in succession:
Codec not found. You may be using a compression type without the corresponding hardware card.
Followed by:
Error: Out of memory.
This mac pro has 8GB of Mac certified memory in it. I can't imagine what the problem is, can anyone help? All sequences are DVCPRO HD 720p24. Is this the dreaded curse of first generation Macs?
Matt
Mac Pro 8 Core, 8GB ram Mac OS X (10.4.9)

When you originally captured this material, were you using 5.1, or an earlier version? The closest I've had to this problem was that HD DVCPRO files created on an Intel Mac in 5.1 cannot be viewed in pre-5.1 installations of FCP on a G4. It's not the same problem as you're describing, but I think there's some connection.

Similar Messages

Syncing: Page Not Found and Server Error

Hi,
I'm having problems with my Creative Cloud files syncing. I keep getting an error saying that it was unable to sync due to a server error. And when I log into the Creative Cloud website I get a "Page Not Found" error when creating new folders or browsing through files.
I've been having proglems lately with the desktop sync and using the Adobe Touch apps like Adobe Ideas. I found just working in the app for a few minutes on a client project the app would generate a ton of "conflict" versions. And currently Adobe Ideas can't sync with Creative Clouds because it's been stuck on "Awaiting Connection" for a few hours now.
Any help with the matter would be greatly appericated. Thanks!
-Ryan
Below are some screenshots I took of the errors along with some console warnings as well.
4/26/14 12:09:15.889 AM Adobe CEF Helper[4373]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 12:09:16.049 AM Adobe CEF Helper[4374]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 12:09:16.198 AM Adobe CEF Helper[4374]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
4/26/14 12:09:16.896 AM Adobe CEF Helper[4373]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
4/26/14 12:49:32.204 AM AdobeAcrobat[5118]: void CGSUpdateManager::log() const: conn 0x205a7: spurious update.
4/26/14 12:54:48.743 AM Adobe Bridge CC[5228]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
4/26/14 12:09:09.132 AM Creative Cloud[4359]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 12:09:09.198 AM Creative Cloud[4359]: objc[4359]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib. One of the two will be used. Which one is undefined.
4/26/14 12:09:09.198 AM Creative Cloud[4359]: objc[4359]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib. One of the two will be used. Which one is undefined.
4/26/14 12:09:12.034 AM Creative Cloud[4359]: objc[4359]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
4/26/14 12:09:12.034 AM Creative Cloud[4359]: objc[4359]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
4/26/14 12:09:14.035 AM Creative Cloud[4359]: objc[4359]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
4/26/14 12:09:14.035 AM Creative Cloud[4359]: objc[4359]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
4/26/14 12:12:47.000 AM kernel[0]: process Creative Cloud[4359] caught causing excessive wakeups. Observed wakeups rate (per sec): 207; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45497
4/26/14 12:12:50.978 AM spindump[4430]: Saved wakeups_resource.spin report for Creative Cloud version 1.5.0.367 () to /Library/Logs/DiagnosticReports/Creative Cloud_2014-04-26-001250_iMac.wakeups_resource.spin
4/26/14 4:48:40.804 AM Creative Cloud[8428]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 4:48:40.882 AM Creative Cloud[8428]: objc[8428]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib. One of the two will be used. Which one is undefined.
4/26/14 4:48:40.882 AM Creative Cloud[8428]: objc[8428]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib. One of the two will be used. Which one is undefined.
4/26/14 4:48:43.813 AM Creative Cloud[8428]: objc[8428]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
4/26/14 4:48:43.813 AM Creative Cloud[8428]: objc[8428]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
4/26/14 4:48:45.689 AM Creative Cloud[8428]: objc[8428]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
4/26/14 4:48:45.690 AM Creative Cloud[8428]: objc[8428]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
4/26/14 4:51:47.000 AM kernel[0]: process Creative Cloud[8428] caught causing excessive wakeups. EXC_RESOURCE supressed due to audio playback
4/26/14 3:14:56.873 AM AdobeAcrobat[5118]: void CGSUpdateManager::log() const: conn 0x205a7: spurious update.
4/26/14 3:44:12.770 AM AdobeAcrobat[5118]: void CGSUpdateManager::log() const: conn 0x205a7: spurious update.
4/26/14 3:46:18.355 AM AdobeAcrobat[5118]: void CGSUpdateManager::log() const: conn 0x205a7: spurious update.
4/26/14 4:48:46.996 AM Adobe CEF Helper[8455]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 4:48:47.214 AM Adobe CEF Helper[8456]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
4/26/14 4:48:47.361 AM Adobe CEF Helper[8456]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
4/26/14 4:48:49.171 AM Adobe CEF Helper[8455]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.

I found the problem, Any idea about how to change the SSO server?
Seem to be pointing to an old SSO server, I tried re-registering but it's still on ORASSO tables
Thanks in advance

Org.flexunit.listeners.UIListener not found, and other problems

I have a basic setup of FlexUnit that comes with the latest FlashBulider. I import a bunch of SWC's in my project and try to follow instructions from here:
http://docs.flexunit.org/index.php?title=Setting_up_a_FlexUnit_4_Project
I got an error saying defintion of UIListener could not be found.
Then I checked the AS docs here: http://docs.flexunit.org/asdocs/index.html
And found out there is no UIListener class at all
So I realized that core.addListener takes IRunListener, and change the code to this:
core.addListener(IRunListener(uiListener));
Sadly, when run. there was a runtime error with this line:
<flexui:TestRunnerBase id="uiListener" width="100%" height="100%" x="0" y="0" />
Saying TestRunnerBase does not implement the IRunListener intarface,

The UIListener is not in the core project, it is in the UIListener project, so unless you have that one as well, you will not have the UIListener.
My guess though is that it is a TestRunnerBase issue. TestRunnerBase isn't something we wrote for FlexUnit 4. It is an adaption of a FlexUnit 1 concept to give people a familiar environment as a default test runner. The goal is to eventually write a new one for FlexUnit 4 but our priorities were features and IDE integration.
All of that said, I am guessing the flexui namespace in your project is pointing to an older version of the TestRunnerBase buried somewhere in the FlexUnit .9 project. We include FlexUnit .9 in its entirety for compatibility reasons, but it means that you can sometimes reference older classes. The appropriate namespace should be:
http://www.adobe.com/2009/flexUnitUIRunner
If that doesn't work, then you are missing the FlexUnit4UIListener.swc and your namespace is probably set differently. Here is another thread on this same issue:
http://forums.adobe.com/message/2252570#2252570
When configured correctly, your MXML file should read something like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="runMe()" xmlns:adobe="http://www.adobe.com/2009/flexUnitUIRunner">
<mx:Script>
      <![CDATA[
        import org.flexunit.listeners.UIListener;
        import compilationSuite.SuitesToRun;
        import org.flexunit.runner.FlexUnitCore;
        private var core:FlexUnitCore;
        public function runMe():void {
          core = new FlexUnitCore();
          core.addListener( uiListener );
          core.run( compilationSuite.SuitesToRun );
    ]]>
</mx:Script>
<adobe:TestRunnerBase id="uiListener" width="100%" height="100%" />
</mx:Application>
I will give the wiki page you reference a read today and see if I can make things clearer,
Mike

SATA Drive not found and other stuff.

Allright.
I have had all kinds of problems setting up this new system that includes the Neo2 plat, amd 64 3500+ WD Raptor and a seagate 80gb sata.
After reading the quide I found in here I finally got to see my primary sata and finally installed Windows on it. Now my issue is, it doesnt see my second sata drive. I dont know why. Im going to try to update the bios and see if this helps but im going nuts over here. I have them connected on sata 3/4 with 3 being my primary. If anyone can help i would appreciate it. If you need any additional info let me know and ill post it. Thx.

Allright I finally got to see the other drive(changed the power connections around a little bit and now its there) however when i got into standard cmos it doesnt show me either drive there. At least I got the second one to come up so Im good to go right now but kinda strange that the drives dont appear in bios dont ya think?

Camera Raw not found and so it won't install the update

I have PSE 6 and did have camera working - now I can't seem to figure out how to install updates. I don't see the app listed in the directory that is mentioned in the instructions.

The following is from the Adobe Support page. I suggest you print it out so that you can refer to it.
Quote:
Install Camera Raw 5.4 for Photoshop Elements 6 on Windows
   1. Close Photoshop Elements 6.
   2. Download Camera Raw 5.4 from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4524
   3. Extract the Camera Raw.8bi file from the ZIP file you downloaded. (Extract only the Camera Raw.8bi file that is at the top level of the ZIP file. Do not extract the Camera Raw.8bi file from the Win64 folder that is inside the ZIP file. This folder contains the 64-bit edition of the Camera Raw plug-in, which is compatible only with the 64-bit edition of Photoshop CS4.)
      Note: ZIP files are compressed files which contain other files. On Windows Vista, you can extract Camera Raw.8bi by right-clicking on the file you downloaded, choosing Extract All, clicking Extract, and then opening the newly-created Camera_Raw_5_4 folder. On Windows XP, you can extract Camera Raw.8bi by right-clicking on the file that you downloaded, choosing Open With > Compressed (Zipped) Folders, and then dragging Camera Raw.8bi to your Desktop.
   4. Do one of the following:
          * If you use a 32-bit edition of Windows, then move Camera Raw.8bi into \Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\File Formats. If you are prompted to overwrite the existing plug-in file, then click Yes or Overwrite.
          * If you use a 64-bit edition of Windows, then move Camera Raw.8bi into \Program Files (x86)\Adobe\Photoshop Elements 6.0\Plug-Ins\File Formats. If you are prompted to overwrite the existing plug-in file, then click Yes or Overwrite.
   5. To install Camera Profiles, extract the CameraProfiles.exe file from the ZIP file that you downloaded. Next, double-click on CameraProfiles.exe and then follow the on-screen instructions.

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

Error message: 'Codec not found..'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

What formats are your sources and sequence? Have you tried resetting your fcp preferences?
https://discussions.apple.com/docs/DOC-2491
And here are some other troubleshooting steps
https://discussions.apple.com/docs/DOC-2591
We're here to help, but unless we approach this in a systematic manner, obvious things can slip thru the cracks. So go thru these things and just let us know if there's anything amiss.
I'm in NYC also, so if you are up against the wall, and feel like bringing your trusty macbook pro by my cutting room, I could probably take a quick look at it and see if there's anything obvious.

Error message: 'Codec not found. You may be using a compression type without the corresponding hardware card' - then - 'Error. Out of memory'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

p.s. having looked at other posts, perhaps I am missing some (or all) of the relevant codecs?
In the folder Macintosh HD > Library > Quicktime
there is basically nothing. Do you think this is the problem?
If so, where do I download FCP codecs from?
Many thanks..

Odd "Codec not found" error

I'm working on a DVCPRO HD project shot at 24p on P2 cards. After editing and color correction I'm trying to render the timeline. The render gets about half way through the project and then halts with the "Codec not found..." error. None of the rest of the clips on the timeline will render even thought all footage is from the same shoot and in the same format.
The individual QuickTime movie clips playback fine in the Finder so I don't think I have any corrupt media. Also, the entire timeline will "Export using QuickTime conversion" just fine. Any ideas on what's going on?
Thanks.

I just wasted several precious hours dealing with exactly the same problem -- "Codec Not Found" when trying to render a DVCProHD 720p24 timeline. In my case, the video processing was set to "Render all YUV material in high-precision YUV", and I had deleted all the previously existing render files just to get a clean set -- sometimes old render files have caused me problems. The render process would chug away for 30 minutes or more(it's a 30 minute piece), then announce the error without having accomplished anything.
I then started rendering in sections, and it turned out that the problem was a jpeg image that had been resized with the motion controls. I resized the original image in photoshop, exported it as a tiff that was itself the right size, put it in the timeline, and then it rendered fine.
I don't know what's going on, but it seems like either the jpeg format was a problem (which I doubt), or the fact that it was resized in FCP, or that plus the fact that there was a text screen over it. But I did resolve the problem in my case.
Does anyone have any idea of what's going on here?

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

For general advice see Troubleshooting issues with iTunes for Windows updates.
Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

SQL Server Reporting Services: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.

Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH

HT1923 After updating Itunes it stopped working. I removed Itunes and reinstalled and i am getting the foloowing errors MSVcr80.dll not found and Itunes not installed correctly error 7 (window errror 126) How do I fix this?

Yesterday I updated my Itunes account and it stopped working. I tried installing itunes version 11.1.4 and once done it came back with 2 error messages MsvCR80.dll was not found and I tunes was not installed correctly Error 7 (windows error 126) I have removed Itunes completely and redownloaded several times with the same result. Is there an easy fix or can I download an older version of Itunes that works?

None of the solutions mentioned in this forum work for me. I've not ever had a problem with your software before. I installed and uninstalled itunes 3 times. No itunes directories exist. I've uninstalled everything labled Apple on my pc withe the same results. The problem is with your software not Windows.

FCP 5.02 and 5.03 HDV codec not found?

Hi i installed a few systems but now i have a machine (G5 tiger 10.4.2 fcp 5.03 and a BM card with driver 5.1.1etc. etc. where if i try to choose easy setup it tells me Codec not found. you may be using a compression type without the corredponding hardware card.
and if i then choose seq. setting HDV :
Videocompressor HDV 1080i50 was not found present and enabled for this compressor setting the video compressor to Animation?
Also there are still intermidate codec's in my library? :
/Library/Application Support/Final Cut Pro System Support/Custom Settings/HDV-Apple Intermediate Codec 1080i50.fcpre
help wanted
cheers
martijn

Have you tried copying the codec from one of the other machines? Might try that?
Jerry

Error: Datasource name not found and no default driver specified

HI All,
I have MySQL as my data base.
I created one universe on top of MySQL. Then i made one webI report on top of that and exported it to BO Portal (Infoview).
Now when I am refreshing this report, it gives me below error in Infoview while its getting refreshed in WebI.
[Database Error] [Microsoft ODBC Driver manager] Datasource name not found and no default driver specified.
WIS 10901
I found SAP Note 1200396 and have created DSN with Same name on Server.
But still I am facing same problem. I have not clustered enviroment.
Guys any one have some idea about this?
I will appreciate your answer.
Thanks in advance,
Rishit

If your BOBJ server runs on 64bit windows you should set up the DSN using the 32bit ODCB utility (<Windowa installation director>\SysWOW64\odbcad32.exe )
Regards,
Stratos

Codec not found. And other errors on fresh install.

Similar Messages

Maybe you are looking for