Codec Overrun Warning/Error

I wanted to share my experience with you all regarding an error I was getting when attempting to mount and decompress dmg files while updating my software.
I would use the built in Update Software tool from the Apple menu... select the packages I wanted... then watch them download. Once down, they would decompress and mount. I would then get an informative error: An error has occurred, and the package might have been tampered with (something along those lines). Anyway I would then download the file directly form the Apple Support site... when I attempted to mount it, I would get a codec overrun warning.
Several calls into the Apple Support Line and I think we found the solution to this problem. The support person, who spoke with a product specialist, stated that I need to do a resinstall using archive and preserve user settings. Doing so, yielded problems with the second disk... it failed installing Garage Band Instruments... so I removed the package and did it again... this time it failed installing some items from iLife. Again, these I didn't care one bit about... so I removed all packages... and it still wanted to install all the packages, even though I told it not to install any of them. Talk about frustrating!
Another call into Apple Support suggested that I NOT select Preserve User Settings... This blew away my accounts... but preserved all my documents and the like, so there was no data lost.
Once complete with the install/upgrade/reinstall of software, I was able to download all the files from the apple support site and mount them with no problems. I then moved my user directory from the "preserved" section to my local user directory... bounced the box... life was back to normal.
This took about five calls into support and about 30 attempts to figure out what was going on with the failures.
I never did get a reason for the codec overrun error or the cause... but didn't want anyone else going through the same pain I did.
MacPro Mac OS X (10.4.8)

Thanks greatly for your help with this.
I had been unable to mount or install the last 4 months of Apple specific updates, as well as some of the other "fun" software out there (Blender, Mac for the SlingBox, etc.).
Searching the various forums here and elsewhere provided no assistance until your post.
Unfortunately, I have so far found that the system will download well again, until...it won't. At which point, I have to again save the settings and reinstall the OS, and do the same set of updates all over. Luckily (?), software other than the specific Mac system stuff seems to stay installed correctly, awaiting the reinstall of current OS files.
This has been my first experience with a Mac, and I have been very much underwhelmed. Perhaps this has been an anomaly, but when this dies, I think I will be returning to the non-Mac world.
I always did like linux!
Thanks again!
iMac Intel Mac OS X (10.4.8)

Similar Messages

How do I address codec overrun error to install a .dmg

I want to free up space on my hard drive so I downloaded and tried to install Singular 0.8.1 from the download link on the apple site. I receive the error "codec overrun" upon installation. Any ideas why this is occurring or suggestions how to correct would be appreciated.
G4 Mac OS X (10.3.9)

1. If you are running 10.3.9 as your profile suggests, you probably should be posting to a forum for that OS version. (This one is for Tiger, OS 10.4.x installation & setup issues.)
2. Check your free drive space. You should have at least 5-10 GB free or OS X won't run properly. Do not attempt to add applications if you have less than this much free space. Instead, manually move files to other media (such as CD's or DVD's, other drives, etc.) before proceeding.

G5 10.5.8 Combo Update codec overrun - install fails

Hi,
I still have my first mac, a Power Mac G5, but it has been acting as a center speaker stand for some time now. A couple of years ago it started playing up, I spent hours and pounds trying to fix it, gave up and bought a shiny new iMac. So with the festive season upon us and orders to tidy up, I thought I'd have one last try at fixing it before turning it into a drinks cabinet.
As I recall, it all started to go wrong one day when I tried to download a large update to something. When I tried to install the update I got a Codec Overrun error and/or a Corrupt File message. As it stands today the machine is running a clean install of OSX 10.5.6 and I am failing to install the MacOSXUpdCombo10.5.8.dmg upgrade. I currently have 2 copies of the update.
One copy on the desktop was downloaded directly from the Apple support site. The .dmg opens and verifies OK and I can launch the MacOSXUpdCombo10.5.8.pkg. This runs through the installation sequence, past the password but finally comes up with an error message "Install Failed. The installer could not validate the contents of the 'MacOSXUpdCombo10.5.8' package. Contact the software manufacturer for assistance."
Another copy in my downloads folder, put there by the Software Updater, doesn't get that far. It comes up with "Warning,The following disk image failed to mount. Image - MacOSXUpdCombo10.5.8.dmg, Reason - codec overrun."
So far I have tried:-
Memory - run third party memory checker application (can't remember which one) and found no faults.Tried different set of memory cards
Hard disk - run all the disk check and repair utilities, re-formatted, repartitioned. Tried a different hard disk.
OSX 10.5.6 - reinstalled from original disks several times.
MacOSXUpdCombo10.5.8 - downloaded via Software Updater process and direct from Apple Support website. Downloaded via wi-fi, ethernet, different Mac, different PC. Always get the exact same file size.
Resetting the PRAM etc
New standby battery
Installing in Safe Mode
Swearing.
None of this has worked. I get some different error messages but they are all variations of "codec overrun", "corrupt file" or "Install failure"
Anyone got any other ideas? Or should I just get on with the drinks cabinet conversion?
Thanks

That message isn't a space available message. If you bring up Disk Utility, how does it say the partition is formatted, ie, partition format, write status, and partition map scheme? Assume SMART status is verified, yes?

Why am I seeing 'codec overrun' when I try to mount the FF8.0 DMG?

Have just downloaded FF8.0 and tried to open the DMG. But unfortunately I've gotten the warning message that the DMG failed to mount, with the stated reason being 'codec overrun.' Can anyone help?

first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible. if no luck see these
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

Disk images failed to mount - codec overrun

Hi,
So after searching through the related posts I have been unable to correct my probelm, which is:
I am unable to open some .dmg files. I have tried to open three different .dmg files from a variety of sources and they all return the same error:
disk images failed to mount - codec overrun
However, I was able to update my system to 10.4.7 using the updater. This did not solve the problem. I then tried load the combo version of 10.4.7 as suggested in a different post and while it didn't load (I accidentally grabbed the powerPC version) it was able to open the .dmg and look in them.
Disk Utility is unable to attach the three that won't open. The first two Disk Utility was unable to verify or repair. The last (a cars game demo) was successfully verified but still came up with the codec overrun error when I tried to attach it. Finally I have tried removing the following two files and then restarting, to no effect.
/System/Library/Extension.kextcache
/System/Library/Caches/com.apple.kernalcaches/
I'd appreciate any help offered. A search on codec overrun was of no use. I searched for "mount failed disk images" and variations of that to find what I have already tried.
Thanks
Pete

I am havin the same problems. codec overrun
I am trying to download stuffit from their site so I can open a program for school.
I tried to download the dmg file from the apple site but was given the same error. Codec overrun
Also I attempted to get the updates from the Apple site.......same error.
So far this computer will not download much of anything without some kind of an error. Essentially this Imac is a $2000 jukebox. It does play music wonderfully.
My roommate was able to downlad easily from the same internet connection with no problem the windows version of the program from te same site.
This is a brand new out of the box iMac. 20" 1 gig 250 GB machine. First Mac for me and it is turning into a real headache.
Any help with the codec overrun would be appreciated.

Demo download - 'codec overrun'

Upon downloading the demo I am greeted with the error message 'codec overrun' when opening the image file. I've download the file 5 times on 2 different browsers with the same result.
Obviously others have had success so what can I do to be able to open the file? Alternative download site? FTP?
Thank you.

What you probably mean is SPI (Stateful Packet Inpection) Firewall. I found this setting on my WGR614v7 Netgear router in its WAN settings:
"Disable SPI Firewall - The SPI (Stateful Packet Inpection) Firewall protects your LAN against Denial of Service attacks. This should only be disabled in special circumstances."
just disable it and restart the router, still checking whether it will resolve the codec overrun issue.

Verification failed! codec overrun!

So this is a brand new MacBook given to me yesterday as a Graduation present. I haven't been able to download anything (such as MSN messenger for Mac and Firefox for MAC, both of which have been downloaded from Apple website). I have tried probably fifty times. Each time I get the same error message 'verification failed' and then 'codec overrun'. I've called Apple three times today, and had to reinstall my software three times. Nothing has worked.
The Mac people don't know how to fix it.
Help anyone???

I'm getting this same error, from Firefox AND Safari. I'm using a TiPB/867MHz with a gig of RAM. I did the archive install (which mucked up my Apache2/PHP install, but that's another story), I did AppleJack.
Once I did the "downgrade" from 10.4.11 to 10.4.6, I was able to download the two Java updates (20 and 36MB - ????) but I can't download the 10.4.11 update at 186MB.
I also can't download things like Plone, iWork '08 demo, and a lot of other things. BUT I went to my Intel Macbook and the same links download fine.
I thought it was bad RAM, but I ran Techtool and everything checked out OK. Applejack didn't find any problems either.

Codec Overrun And Invalid Checksum

Over the past 2 months, I have been having issues downloading the iPhone SDK. I started attempting to download the dmg from the iPhone Dev Center from 2.2 and since the day Apple releases 3.0. I have downloaded over 30 times and every single time, I tried to mount the DMG, it is either Invalid Checksum or Codec Overrun. I tried downloading other DMGs and what strikes me was that any DMG below 1GB, seems to mount successfully. Those that are above (like the iPhone SDK), are giving errors. Even if I skip the validation part, which forces the DMG to mount successfully, I would end up failing in installation.
There are countless written cases around this when googled, and I've tried every one of them, short of a complete re-installation of Leopard. And even that, I am not sure it will work as some have written to say that they have tried but unsuccessful. From changing the router, to stopping internet sharing to disabling all firewall and security and even repairing all disk permission and clearing all cache! Majority of people have this codec overrun issue, none has actually posted a resolution. What bugs me was that even RAR files that I download gets CRC failures and I am not sure if this is related to the DMG problems.
If there are anyone out there who has this resolved, please share... you will save a lot of people with tremendous amount of hassle. If any Apple Technician is reading this, please acknowledge and rectify... this is the single most frustrating problem with Leopard. Do a google on 'Codec Overrun' and you will hit countless users expressing their frustration over this issue. I had zero problems with downloads on Tiger, but ever since Leopard, this is showing up so often and I am surprise it only exist on the Macs. I am not sure who's fault lies with such download problem, the ISP, any hardware, the software or the OS... but I am certain that this has every bit to do with the Mac OS. It doesn't explain why Tiger is perfectly ok with downloads and eversince Leopard, it's not.

Strongly suggest posting to the appropriate forum under OS X Technologies where the Unix and developers hang out.

Q7 Does Not Install - 'Codec Overrun'

Hi,
Trying to install latest version of quicktime through QuicktimeInstallerX.dmg, but get a warning message appear on the screen indicating 'disk images failed to mount.
Image: Quicktimeinstaller
Reason: Codec overrun
Have repeated exersize after shuting down computer and restarting.
Computer Specs. Powerbook G4, Processor 1.25Mhz,Memory 2GB, OSX V10.3.9
Anyone have any ideas?
Thanks in advance
Cmonkey

I would try restarting, then downloading the disk image again (sounds as though it may be corrupt) and/or try mounting it with Toast.

Warning/Error Message for Tax Code Mismatch between PO and Invoice

Hi Experts
Is there any SAP standard warning/ error message thrown when the User changes the tax code in the invoice which does not match the default tax code of the PO? The client would like to identify a 'tax code variance'.
If no, is there anyway we can configure this? I have checked in OMRM and OBA5 and could not find any relevant message types for the above requirement.
Any inputs would be helpful.
Regards

Hi,
Can you maintain the validation for your requirement, when user change the tax code system give warning or error message automatically.
Edited by: Lavanya.ch on Dec 15, 2011 8:15 AM

Codec Not Found error when trying to render/export layered sequence

I have a sequence that I never had problems with in the past but as of yesterday when I open the project and try to render or export. I get the infamous dialogue box saying, "Codec not found. You may be using a compression type without the corresponding hardware card."
I've narrowed it down to only being a problem wherever I have two particular types of media clips layered one on top of the other. In this case it is occurring wherever I have an Apple ProRes 422 (HQ) clip layered with an Animation codec clip containing a graphical bug that was created in After Effects and exported as a Quicktime Movie with RGB+Alpha. Because of the Alpha channel in the bug clip, it is automatically given the Animation codec upon export from After Effects to retain and preserve the transparency needed. I've also narrowed it down to only occurring when all this is combined on a sequence with its compressor set to standard ProRes 422 or ProRes HQ. If I set it to any other codec, such as any DV/DVC Pro or MPEG IMX codec then I can render and export again.
Also interesting is that I can nest the sequence into another sequence and render and export just fine as well, even with it set to either ProRes codec (which will probably prove to be a suitable workaround for the time being), however, any additional insight into this issue that anyone can provide, pertaining to what may have changed or caused my original sequence to suddenly not want to render anymore would be greatly appreciated.
And if anyone else reading this comes across this this same type of problem themselves, then I suggest what I just got to work: Duplicate your sequence, then delete the clips from the new sequence and nest the original sequence into it.
Here is some additional background info if desired:
I'm using FCP 6.0.6. The sequence I have going here is set to Apple ProRes 422 and consists entirely of Quicktime Movie files. Video Track 1 has the main video clips using the ProRes HQ codec (Again, even with the sequence set to ProRes HQ, it doesn't make any difference here). Track 2 has a graphic bug that was created in After Effects and layered over the Track 1 clips at various places. I was able to work with these clips and render as well as export the sequence with no problems last week. However, I was requested to revise the bug in After Effects, and then replace the old bug with new bug and export the sequence again. So yesterday, I simply opened up the After Effects project file for the bug, made the revisions and exported it with a new name using the same settings as the previous bug. The render problem I'm now facing surfaced right when I opened the FCP project file yesterday, before even importing and replacing the old bug with the new bug. I went ahead and imported the new bug and placed it in place of where the old bug occurred. But the render and problem remained. On this particular problem sequence, I can render the new bug if I actually disable or remove the ProRes clip beneath it, but I cannot in turn render the ProRes clip after disabling/removing the Animation clip above it.
Now, I can copy either type of clip into their own sequence allowing the clips' respective native settings (ProRes HQ & Animation) to take effect and then they will playback and export just fine. I can even copy the bug clip (Animation codec) and paste it into the other clip's ProRes HQ sequence and it will render and export just fine from there as long as it is placed next to the other clip and not layered over it. On these newer sequences, it is only when the bug (Animation) clip is layered over the ProRes HQ clip with the sequence set to ProRes or ProRes HQ do I tend to still get the "Codec not found" error.
I've also tried the following steps to try and troubleshoot to no avail:
1. Copied entire sequence into a new sequence. Problem still occurs.
2. Closed FCP, trashed preferences, and restarted FCP. Problem still not resolved.
3. Opened project on another computer, had same problem.

Thanks for sharing these ideas about dealing with this error message.
For what it's worth, I finally managed to solve a similar issue by going into sequence settings, choosing the Video Processing tab, and changing Render 10-bit YUV to Render 8-bit YUV.
Maybe this helps someone?

Acrobat 9.3.3 Print Warning/Error Message contains no text

We are using Reader 9.3.3 and we are getting a strange error when we print. The window comes with the warning symbol, has 3 radio buttons and a checkbox that says "don't show this again" and an okay button. If I check the first radio button and select ok, nothing prints. If I choose the second or third radio button, the prints come out. I would like to know what the options are for this warning/error. It is happening on Windows 7, and Windows XP 64 Bit. I has also gone away on 2 of the 5 computers this has shown up on.
Thanks for your help.
Dave

Maybe your installation is currupt (scratched CD)
Reinstall on another maschine (and clean CD) to validate this case.
Update your Acrobat, maybe the corresponding files are replaced or the error is fixed.

BUG: Warning/Error just refreshing page several times???

Hi!
I made a simple page:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0"
          xmlns:f="http://java.sun.com/jsf/core"
          xmlns:h="http://java.sun.com/jsf/html"
          xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
          xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
    <af:document>
      <af:messages/>
      <af:form>
        <af:pageTemplate viewId="/oracle/templates/threeColumnTemplate.jspx">
          <f:facet name="center">
            <af:panelGroupLayout layout="vertical">
              <af:subform>
                <dvt:graph graphType="LINE_VERT_ABS"
                           dynamicResize="DYNAMIC_SIZE"
                           value="#{bindings.SampleGraphDataRow.graphModel}"/>
                <af:commandButton text="commandButton 1"/>
              </af:subform>
            </af:panelGroupLayout>
          </f:facet>
          <f:facet name="header"/>
          <f:facet name="end"/>
          <f:facet name="start"/>
          <f:facet name="branding"/>
          <f:facet name="copyright"/>
          <f:facet name="status"/>
        </af:pageTemplate>
      </af:form>
    </af:document>
</f:view>
</jsp:root>First time I get a page without any problems (expect standard "WARNING: Header modification request was rejected. Because the setter method was called from included servlet. It is restricted by SRV.8.3 of Servlet Specification 2.4. : current-workspace-app" I'm getting with every single page).
Then I was just refreshing this page a few times (clicking a refresh button in browser, without doing anything else in page – so no PPRs, actions etc. – so no client events should be produced by my acting beside page refresh).
After several refreshes, strange WARNING (looking more like error than just warning) appeared in log window:
WARNING: empty String
java.lang.NumberFormatException: empty String
     at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
     at java.lang.Double.parseDouble(Double.java:510)
     at java.text.DigitList.getDouble(DigitList.java:151)
     at java.text.DecimalFormat.parse(DecimalFormat.java:1303)
     at java.text.SimpleDateFormat.subParse(SimpleDateFormat.java:1918)
     at java.text.SimpleDateFormat.parse(SimpleDateFormat.java:1264)
     at java.text.DateFormat.parse(DateFormat.java:335)
     at com.evermind.server.http.EvermindHttpServletRequest.getDateHeader(EvermindHttpServletRequest.java:1581)
     at com.evermind.server.http.EvermindHttpServletRequest.getDateHeader(EvermindHttpServletRequest.java:1379)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at org.apache.myfaces.trinidad.webapp.ResourceServlet.service(ResourceServlet.java:162)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:118)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.security.jazn.oc4j.JAZNFilter$3.run(JAZNFilter.java:434)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:308)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:452)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:583)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
     at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
     at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
     at java.lang.Thread.run(Thread.java:619)
May 11, 2008 8:16:21 PM com.evermind.server.ServerBase log
WARNING: Application1-ViewController-webapp: Servlet error
oracle.security.jazn.JAZNRuntimeException: empty String
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:480)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:583)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
     at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
     at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NumberFormatException: empty String
     at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
Why is this happening? The page renders (apparently) normally, the graph renders as it should, but I'm not sure if the page is going to work correctly because of this warning/error.
I'm using TP4 on Vista x86, with JDK 1.6u5.
Anyone, please take a look at this. It may be a bug somewhere...
Regards,
PaKo

Pako,
the message "java.lang.NumberFormatException: empty String" points to a missing data value. I'll file a bug and ask QA to verify this.
Frank

Report warning/error if wrong keyfield found

Hello experts,
I have a scenario in PI 7.1 environment where I am doing file(csv) to file(xml) conversion. The source file has multiple records and I am hence reading it using keyfield in the file content conversion. The default behaviour in this scenario is that if the no matching keyfield is found for a record, the record is ignored and not read. Is there any way to report warning/error if any record is ignored due to incorrect keyfield?
Thanks
RR

Yep. But is there any work around at all to notify that records have been ignored?
Thanks,
RR

Gdk-WARNING **: Error converting from UTF-8 to STRING

I just installed Arch64 few days ago. In my old setup I was used to work with 2 softwares: Eclipse CDT and WingIDE.
I tried to start these applications (they require java and python but they are binary releases) locally and I get this errors which I can't solve by myself googling... Reporting snapshots of my desktop too.
[j_zar@Surprise eclipse]$ ./eclipse
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: Impossibile aprire il convertitore da "UTF-8" a "ISO-8859-1"
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: Failed to load Pango module '/usr/lib/pango/1.6.0/modules/pango-basic-fc.so' for id 'BasicScriptEngineFc'
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: pango_shape called with bad font, expect ugly output
(eclipse:7864): Pango-WARNING **: pango_font_get_glyph_extents called with null font argument, expect ugly output
(eclipse:7864): Pango-WARNING **: pango_font_get_metrics called with null font argument, expect ugly output
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Pango-WARNING **: /usr/lib/pango/1.6.0/modules/pango-basic-fc.so: wrong ELF class: ELFCLASS64
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Gdk-WARNING **: Error converting from UTF-8 to STRING: La conversione del set di caratteri da "UTF-8" a "ISO-8859-1" non è supportata
(eclipse:7864): Pango-WARNING **: pango_cairo_font_get_scaled_font called with bad font, expect ugly output
[j_zar@Surprise wingide]$ ./wing
(wing.py:7922): Gdk-WARNING **: Error converting from UTF-8 to STRING: Could not open converter from 'UTF-8' to 'ISO-8859-1'
(wing.py:7922): Gdk-WARNING **: Error converting from UTF-8 to STRING: Conversion from character set 'UTF-8' to 'ISO-8859-1' is not supported
Anybody can help in this???
Last edited by J_Zar (2007-10-30 11:48:28)

There has been talk about adding these config files, that fixes this kinda problems, to a separate pkg with a helper script you run 32bit programs with.
for quick fix
Link
Grab the 3 pango files, throw them somewhere, edit pangorc to corresponding paths for the 2 other files.
Start program with
export PANGO_RC_FILE="/path/to/pangorc"
program
for the string error, if its iconv
export GCONV_PATH=/opt/lib32/usr/lib/gconv
to previous command
Note, you cant start 64bit programs that use pango/iconv from the terminal you exported the variable.

Codec Overrun Warning/Error

Similar Messages

Maybe you are looking for