Coded UI -VSTS 2012 How to get the tab details from UITabContainerPane(UI Test Control)

Hi Team,
I am quite new to Coded UI. I am trying out the possibility of Coded UI for Spotfire Report Validations which is available in web portal. I have three tabs on my web page. How can get the list of tabs and act on each. In the recorded script i could see that
under UITabContainerPane I can see the tab coming under UITabContainerPane(UITestControl). I am not sure from this parent how will i get the childs to get access to each tabs. Please advice.
Thanks & Regards,
Divya

I tried the following code however when i do a quick watch on div i get a timeout.
public partial class UIMap
public void selectTab()
HtmlDiv div = new HtmlDiv();
div.SearchProperties[HtmlDiv.PropertyNames.Name] = "tab";
HtmlControl controls = new HtmlControl();
controls.SearchProperties.Add(HtmlControl.PropertyNames.Class, "singleTabContainer");
UITestControlCollection collection = controls.FindMatchingControls();

Similar Messages

How to get the return values from a web page

Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AM

Hi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri

How to get the current week from sysdate?

Hi sir,
i want to know how to get the current week from sysdate?
thanks

Hi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios

How to get the network details in flex4.5 web application

How to get the network details in flex 4.5 web application
similar to the nativeinterface in air application

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

How to get the selection parameters from logical database into one of the t

Hi Sap ABAP Champians,
How to get the selection parameters from logical database into one of the tab in the tabstrip selection-screen.
Please help me for this
Thanks
Basu

Hi
Thanks, that will work, but then I'll have to insert code into all my reports.
I can see that "Application Server Control Console" is able to rerun a report.
This must mean that the Report Server has access to the runtime parameters.
But how?
Cheers
Nils Peter

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

How to get the extension Info from firefox? Do we have any firefox API to communicate with the browser? I couldnt see the HTML of the widget displayed in the toolbar how to access the widget using JS or any way

Hi,
Thanks for the suggestion. I've been playing around with some of the classes of the java.net package and java.io
Using the URL class i can get the content of the data from a STATIC page and output that response to file so that is does not display to the client broswer.
But this only works if the URL i give points to a static html page.
So the problem i'm getting is if i'm righting in arguments in the URL, this means that server needs to process the arguments i give and its sends back a dynamic result. Because its dynamic the URL class can not handle this and throws me an exception everytime :(
Have u ever tried to do some things like this?
Rahul

How to get the Database type from weblogic Db connection

I want to use database version control in my application . that means different database type use different Sql Statement. Such as in weblogic7.0 if I create SqlServer JDBC pool then I will use some special Sqlserver sql Statement . such as some join statement. If I create Oralce JDBC pool then I have to use different Sql statement . because these two database support different Sql statement.
What my question is how to get the database type from the connection.

For a normal jdbc driver you can use
Connection.getMetaData()
To get the meta data, in particular the getDatabase...() methods.
That might or might not work.
However, at the very least in the server you have access to the weblogic properties so you can parse the pool property to figure it out.

How to get the input details on the output screen in T code KCR0

Hi All,
How to get the input details on the output screen in T code KCR0, the issue is that we need to get the input details like Company code and payment date on the output screen while executing the report painter via t code KCR0.
I tried to chane the settings via t code KCR6 but still didn't get the required output details.
Regards,
Ajay

This is the asset accounting forum. You should post your question in the proper forum.

How to get the XML messages from JMS Queue in BPM

I have one requirement in my application.we are sending XML messages to the JMS Queue.How to get the XML messages from JMS Queue and how to Extract the details from XMl.
can you please send me the code to get the XML messages from the JMS Queue.
Thank you,

Hi,
Sure others will have some other ideas, but here's what I typically do to get the XML from a JMS queue. Inside the Global Automatic that pops the messages off the queue you'd have logic similar to this:
artifactInfoNodes as Any[]
xmlObject as Fuego.Xml.XMLObject = XMLObject()
load xmlObject using xmlText = message.textValue
. . . Once you have this, it's a matter of deciding what you want to do with the message. Most times you'll parse the XML (using XPATH statemens), set argument variables and create a work item instance.
Hope this helps,
Dan

We need to buy Adobe Framemaker version 11. The distributor is only able to provide us with version 12. Can someone suggest me how is it possible to get the license for ver 11 serial key after purchasing ver 12 and also how to get the download details ?

We need to buy Adobe Framemaker version 11. The distributor is only able to provide us with version 12. Can someone suggest me how is it possible to get the license for ver 11 serial key after purchasing ver 12 and also how to get the download details ? Urgent response will be helpful.D

Adobe Support helped us with a similar query. We ended up with exactly what you need.

HT4859 Does anyone know how to get my Mailbox details from iCloud Back-up? I have accidentally deleted lots of emails I needed to keep. Thanks

Does anyone know how to get my Mailbox details from ICloud Back-up?
I deleted some emails in error and need them back.Thanks

The iCloud backup doesn't contain email. If you deleted the email and it isn't in your trash folder, there is no way to recover it.

How to find the TAB details in the program - Urjent

Hi All,
There is a customized tab with details in a screen. How to see the customized tab details in the program. When I go and see in the status and program name, there are many includes written over there.
I just want to go and see the details in the tab of the screen in the program. Please let me know how to see the TAB details in the program.
Thanks,
Ramana

hi KCR,
You have to place cursor on that tab and then you have to go to Status...There you can see the program name as well as screen number... You can go for screen number there you can see the flow logic and then you can confirm the screen after going in the layout......
Just try and see.. and let me know..whether it works or not....
rewards points if it helpful...
Cheers,
Sagun Desai....

How to get the query values from the url in a servlet and pass them to jsp

ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

ok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
%

How to get the selected values from the shuttle

Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanks

you can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil

Coded UI -VSTS 2012 How to get the tab details from UITabContainerPane(UI Test Control)

Similar Messages

Maybe you are looking for