Codes of control indicator monitor

I have a monitor model HP p1230. Shut off the screen and the light began to shine 7 short and 1 long interval. I guess this is the problem code. Can you tell me what this code means.

Peter Parker wrote:
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
If you copy&paste a control, the label will jump back to the default location for the pasted control.
There is a better way! It makes copying a control faster and retains the label location:
select the control you want to copy
hold down the [ctrl] key and drag the terminal to a new place.
You will have a copy of the original control at the new location and the label position is the same.
(Darren would probably call that a Nugget© )
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Set default to Classic style control/indicator

Is it possible to set default to "classic style" control/indicator so that when I create a control/indicator from the block diagram, I will have a classic style control/indicator on the front panel?
Somehow, I still like the classic style control/indicator more. Many times, after I create a control/indicator from the block diagram, I have to replace the new style control/indicator with a classic style control/indicator from the front panel. It can be done, but it would be nice if I can create what I want from the block diagram directly.
Thanks.
Ian Ren

Well, to manually place a classic control, you would just go to the classic palette, no settings needed.
Have you read the detailed help for this option? Maybe it's not exactly what you think it is.
"Control Style for Create Control/Indicator—Changes the style of the control or indicator LabVIEW creates when you right-click a terminal and select Create»Control or Create»Indicator from the shortcut menu."
LabVIEW Champion . Do more with less code and in less time .

Price Control Indicator inconsistant

I am getting this error message at time of Goods Movement (Transfer Posting store to store two step Mvt 313) for a particular material.
M7315 - Price control indicator inconsistent:
The problem is I have not created Accounting views for material i have only enabled accounting view in back end configuration.
I have also checked material twice in MM03 accounting view is not created. I cannot understand why sap is giving this message if accounting view is not created.
Any help would be useful.

Hi,
Before transfer posting store to store, 1st check material type of material master in t.code:OMS2 and find price control in it.
Now use t.code:MM03 and search material status with views for each storage location individually with plant.
If material properties are same for two storage locations- why cannot you try with 311 movement type-Transfer posting storage location (one-step)
Regards,
Biju K

Controlling indicator

hi,
In T- code KKF6N , product cost collector, afetr completion all field , when i try to save it , sytem showing message" control indicators for your controlling area dioes not exist"
please suggest me whts that & where is this control indicators
Thanks

Hi,
In Controlling --> General Controlling --> Organization -->Maintain Controlling Area --> Maintain Controlling Area --> Activate Components/Control Indicators
You can use the control indicator to activate or deactivate particular components and functions in Controlling per fiscal year.
Pl. refer,
http://help.sap.com/saphelp_46c/helpdata/en/66/937535905bd32ae10000009b38f848/frameset.htm
Regards,
Senthilkumar

Set label to appear to the right of control/indicator in a block diagram

Hello,
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
Peter

Peter Parker wrote:
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
If you copy&paste a control, the label will jump back to the default location for the pasted control.
There is a better way! It makes copying a control faster and retains the label location:
select the control you want to copy
hold down the [ctrl] key and drag the terminal to a new place.
You will have a copy of the original control at the new location and the label position is the same.
(Darren would probably call that a Nugget© )
LabVIEW Champion . Do more with less code and in less time .

Create Remote Control and Monitor VI

Hi all,
I have 2 VIs. One is PC Host VI and other is cFP2200 real-time running VI.
Now I can use PC host and cFP shared variable to control and monitor in the same network.
But I have a problem that I need 2 or more cFP in the same network.How can I seprate to control themone by one?
They are using the same program but set with different IP.
Does shared variables are using fix IP and can I type the cFP2000 network IP in PC Host VI to select different cFP?
How to do ?
Thanks.
Robert

Hello Robert,
You will need to use a separate shared variable for each cFP. You can create a Case Structure in your Host VI to select which shared variable to use based on which cFP you select. I think that's the simplest option for you.
There is also a way to programmatically change the data binding for a shared variable, but this requires the DSC Module. Take a look at this article if you want to check out this option: http://digital.ni.com/public.nsf/allkb/2E8BAD0EA218A7558625712E0003F044?OpenDocument
Product Support Engineer
National Instruments

Issue in Assignment of company codes to controlling area TKAO2 and OKKP

Hello Gurus,
I configured company code and controlling area in development client and transport to Testing client.But in QA client I can see in the Table TKA02 and respective assignment of company code to controlling area .But if I am checking in TCode OKKP and selecting Controlling area and checking the company codes assisgment there is no asssisgmnet. is this issue relating to transport as I am FICO consultant not geting solution.
This issue pertain to only one controlling area other controlling area with there company code assignment is correct.
Thanks a lot
Edited by: Manu Rathore on Apr 7, 2011 8:56 AM
Edited by: Manu Rathore on Apr 7, 2011 8:58 AM

Hello Balaji,
But I transport everything through one transport request and I haven't maintain any sequence.can this issue be due to mine non maintaining of sequence in transport request or something else?
if so How to solve it.
Many Many Thanks
Manu

Can you programmatically change the width of columns in a table control\indicator

Is it possible to programmatically change the width of columns in a table control\indicator ie to fit to width of the data or in my case the header information.

Create a property node (or reference) and use the 'Active Cell' property to select which column you want to change and then use the 'Cell size'--> 'Width' property to change the size.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
table.vi ‏33 KB

Table for control indicator in inspection characteristics(QP03)

Hi
can any one tell me in which table " Control Indicator " data is stored?
in QP03 there is a control indicator tab for MICs in that i want Long term inspection details for ALL MICs
can any one tell me the control indicator table?
Regards
Smitha

Refer the reply given by Gaint in QM Gajesh Nagesh
Re: Control Indicator field in Inspection plan characteristics
This will solve your perpose .....use Bapi
iNSPECTIONPLAN_DISPLAY
INSPECTIONPLAN_CHAR_DISPLAY
this will at least give you some idea...........

Control indicator for PO type

the field BSAKZ in table EKKO represent the control indicator for PO type.what is control indicator and from which field in the PO,value is stored in BSAKZ

Hi
this field (length - 1) takes only two values either (T - transport or R - purchase requisiton for outline agreement)

NWDI - NON SAP ABAP / JAVA Code Version Control

Dear Friends,
Is there a way we can utilize SAP NWDI application for NON-SAP Code Version Control?
Our goal is to provide version control for some UNIX scripts of which we are going to deploy across the landscape...
Thank you,
Sri

Hi Sri,
here is a blog from the very beginnings you might find interesting as well:
Why DTR ? Why not Perforce or ClearCase...?
And yes, as Jun said you can create your own dtr workspace and manage your own data there using DTR console or even the DTR webui .
Cheers,
Ervin

Change of Price Control indicator.

Hi,
Under what conditions a maerial price control indicator can be changed from 'S' to 'V" and vice versa.
Regards,
R. Dillibabu.

Hi,.
If the material is split valuated you can ONLY change the V to an S on the accounting views that have a valuation type specified.
You CANNOT under ANY circumstances change the V to an S on the "higher level" accounting view of a split valuation managed material (the higher level accounting view is the one where you do not specify a valuation type.).
The reason you cannot is due to the fact that each valuation type below this higher level can have a different price and different stock quantities and so the higher level HAS to be an AVERAGE of the lower levels, managed by the system.
There is no reason why you would ever want to change the higher level view from a V to an S because this view is not used for anything. It simply stores the average price and total value of stock across all valuation types. It is not used in any business transactions.
Why do you want to change it from a V to an S?
Steve B

Profit center assign in Copany code and controling Area

where Profit center assign in Copany code and controling Area ?

Hi,
Company code, Controlling Area, Profit centre, Cost centres are created by FI/CO functionals.
Pl. discuss with your FI/CO counterpart.
My suggestion is that, don't create yourself, because it integrates to lot of other areas.
Just for learning purpose, you can go to SPRO-Controlling-Profit centre accounting.
Madhava

ASSINING COMPANY CODE TO CONTROLLING AREA

hi,
iam trying to assign the company code to the controlling area but there is field <b>C Ctr Hierarchy</b> which i need to fill up, how can i do that one before i assign company code to controlling area

when you are creating a Controlling Area Cost Centre Standard Hierarchy is mandatory to can as well give the Std. Hier. while creating Controlling area itself and save it. The System will remind you that the said hierarchy is not maintained and should it be maintained now?
Click Yes, and save again.
the controlling area and std hierarchy get created simultaniously.
Assign points if found useful
Regards
Praveen

Price Control Indicator

Hi,
We noticed that one material with wrong price control indicator as "S" instead of "V". It's impacting the overall Inventory valuation. We intend to update the MAP prices for these part no at our end to reflect the correct Inventory but can proceed only once the price control indicator is corrected appropriately.
How can i acheive this issue?
Note: Material contains open po's and stock.
Thanks & Regards
Anilkumar Dalai

Hi
The price control indicator in the Material master can be changed any time if it is allowable to change.
As previously you had price control S - & standrda proce maintained
when you change it to V - The Mocving average proce will be overwritten by the Standard price thus keeping the valuation same
Thanks & Regards
Kishore

Codes of control indicator monitor

Similar Messages

Maybe you are looking for