Coding for PFS status button in ALV report.
Hi,
Can anyone please tell me how to write code for PFS status buttons which we enable in ALV report to make them work according to required functionality.
Hi,
In the ALV, Pass the user command form name in the parameter i_callback_user_command .
then create a sub routine like below and do the coding,
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 0
OTHERS = 0.
FORM user_command USING pa_ucomm TYPE syucomm
pa_selfield TYPE slis_selfield.
CASE pa_ucomm.
WHEN 'BACK'.
<<UR CODE>>
ENDCASE.
ENDFORM.
reward points if usefull
Regards,
Niyaz
Similar Messages
-
How to use pf-status u2018menuu2019 in ALV report ?
Hi Friends,
How to use pf-status u2018menuu2019 in ALV report ?
I want to use back button ( F3). whenever press it should show
another report.
I used subroutine
form SUB_ERROR_OUTPUT USING RT_EXTAB TYPE SLIS_T_EXTAB .
SET PF-STATUS 'ZMENU' EXCLUDING RT_EXTAB. u201C( the button name is u201C back u201C)
CASE SY-UCOMM.
*WHEN '&F03'.
WHEN 'BACK'
( my coding is there ).
endcase.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PF_STATUS_SET = 'SUB_ERROR_OUTPUT'
but it is executing, working the back button but not showing another report .
any other procedure to use back button in alv report ?
plz any idea .
For correct answer reword most.
Thanking you.Purchase day Book .
Data to be down loaded / printed for EDP dept. CGL.
CGL - Requirement .
WRITTEN BY : ADI.****
*CONSULTANT : SANJAY JAJOO..
AS PER DP REQUIREMENT.
-CHANGED BY : KRISHNA MOHAN (15/01/2002)--
-CHANGE REQ BY : JAJU S--
-DESCRIPTION : SUMMRY BY TAX CODE WISE & GL CODE WISE--
---MODIFIED LINES: -
---CHANGED BY : -
---CHANGE REQ BY : -
---DESCRIPTION : -
---MODIFIED LINES: -
*---changed by : sanjay jajoo on 23/08
*---changed req by: Ranka
*---Description : Inserting Range of period as sel field
changed by : krishna mohan
func. consultant: sanjay jajoo
REPORT ZMMPURDB MESSAGE-ID 00
LINE-SIZE 255
LINE-COUNT 60
NO STANDARD PAGE HEADING .
TABLES : MKPF , MSEG ,SKAT,
EKKO , EKPO , EKBE ,
BSEG , BKPF , BSET ,
T009B , T001 , T007S ,
T001W , T001K ,LFA1.
******Table deactivated on 30/8/2000------jaju
*tables : zcgltaxatn .
DATA : ZFILE1(65) VALUE '/DOWNLOAD/'.
DATA : ZFILE2(65) .
DATA : ZFILE(30) TYPE C VALUE '/DOWNLOAD/'.
DATA : ZMON(2).
DATA : ZTOTAL(11) TYPE N.
DATA: ZTOT1 TYPE P DECIMALS 2.
DATA: ZTXT LIKE SKAT-TXT50.
TYPES: BEGIN OF COMPANY ,
HKONT LIKE BSEG-HKONT,
TOTAL LIKE BSEG-DMBTR,
END OF COMPANY.
DATA: COMP TYPE COMPANY,
COMPTAB TYPE HASHED TABLE OF COMPANY WITH UNIQUE KEY HKONT
WITH HEADER LINE.
DATA : NEXT LIKE BSEG-BUZEI. "A.A. (28/03/2000)
DATA : DOC LIKE BSEG-BELNR. "A.A. (28/03/2000)
DATA S_GSBER.
DATA: CTR TYPE I.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-B01.
PARAMETERS : T_BUKRS LIKE T001-BUKRS OBLIGATORY MEMORY ID BUK .
***********CH--ID- ADI- 29 / 09 / 1999
SELECT-OPTIONS : ZGL FOR BSEG-HKONT OBLIGATORY.
***********CH--ID- ADI- 29 / 09 / 1999
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(9) TEXT-C01 .
PARAMETERS : POPER RADIOBUTTON GROUP RAD1 .
SELECTION-SCREEN COMMENT 13(7) TEXT-C02 .
PARAMETERS : MONTH RADIOBUTTON GROUP RAD1 .
SELECTION-SCREEN COMMENT 23(8) TEXT-C03 .
SELECTION-SCREEN POSITION 33 .
commented on 22/08 sanjay jajoo
*PARAMETERS : T_MONAT LIKE BKPF-MONAT .
SELECTION-SCREEN END OF LINE.
PARAMETERS : T_GJAHR LIKE BKPF-GJAHR OBLIGATORY .
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS : S_DOCTYP FOR BKPF-BLART,
S_VENDOR FOR LFA1-LIFNR MATCHCODE OBJECT KRED,
S_MATNR FOR BSEG-MATNR NO-DISPLAY,
T_BUDAT FOR MKPF-BUDAT NO-EXTENSION MODIF ID DAT,
p_gsber FOR bseg-gsber OBLIGATORY,
P_GSBER FOR BSEG-GSBER,
mod starts for inserting range of period - sanjay jajoo
T_MONAT FOR BKPF-MONAT OBLIGATORY.
mod ends
*SELECT-OPTIONS: br_blart FOR mkpf-blart.
*Select-options: br_blart for bkpf-blart.
SELECTION-SCREEN END OF BLOCK B1 .
Start of Delete by B.Elan on 23/12/2005
*PARAMETERS : errors AS CHECKBOX .
*PARAMETERS : summary AS CHECKBOX .
*PARAMETERS : nodetail AS CHECKBOX .
**selection-screen skip 2.
*SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-b03. "<<<
*Add
*PARAMETER : stax_reg RADIOBUTTON GROUP rad2 . "<<<
*Add
*PARAMETER : pur_db RADIOBUTTON GROUP rad2 . "<<<
*Add
*SELECTION-SCREEN END OF BLOCK b3 . "<<< Add
*SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-b02.
*PARAMETERS : display RADIOBUTTON GROUP grp1 ,
dload RADIOBUTTON GROUP grp1.
*PARAMETERS : fname1 LIKE rlgrap-filename .
*DATA : zdoc LIKE bseg-belnr.
*DATA : fname LIKE rlgrap-filename.
*SELECTION-SCREEN END OF BLOCK b2 .
End of Delete by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETER : PUR_DB RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C06.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETERS : MAT_SM RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C04.
SELECTION-SCREEN COMMENT 35(5) TEXT-C01.
PARAMETERS : VEN_SM RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 44(20) TEXT-C05.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(5) TEXT-C01.
PARAMETERS : MAT_DT RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 10(25) TEXT-C07.
SELECTION-SCREEN COMMENT 35(5) TEXT-C01.
PARAMETERS : VEN_DT RADIOBUTTON GROUP RAD2.
SELECTION-SCREEN COMMENT 44(20) TEXT-C08.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
End of Insert by B.Elan on 23/12/2005
Hard coded values used in the program
added by krishna mohan on 09/02/02
DATA : BEGIN OF IT_MSEG OCCURS 0,
BELNR LIKE BSEG-BELNR,
MBLNR LIKE MSEG-MBLNR,
EBELN LIKE BSEG-EBELN,
EBELP LIKE BSEG-EBELP,
END OF IT_MSEG.
mod ends
Start of Insert by B.Elan on 23/12/2005
*--vikky
DATA : BEGIN OF IT_FINAL OCCURS 0,
MATNR LIKE MARA-MATNR,
BLART LIKE BKPF-BLART, " doctype
BELNR LIKE BSEG-BELNR, "sr - nO 10
XBLNR LIKE BKPF-XBLNR , " Bill-no 16
NAME1_VENDOR(25),
"lfa1-name1, " Vendor Name 35
HKONT LIKE BSEG-HKONT , " Alloc-cd 10
MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
PON LIKE EKKO-EBELN , " PON 10
MAKTX LIKE MAKT-MAKTX, "Material text 40
MBLNR LIKE MSEG-MBLNR,
QTY(8) TYPE P DECIMALS 2 , "Qty 11
RATE(9) TYPE P DECIMALS 2 , "Rate11
DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
PROD-AMT(9) TYPE P DECIMALS 2,
"AMOUNT 13
EXCISE(8) TYPE P DECIMALS 2 , "eXCISE TAX 11
SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
FREIGHT(9) TYPE P DECIMALS 2, "FREIGHT 11
OTHERS(11) TYPE P DECIMALS 2, " OTHERS 11
TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
END OF IT_FINAL.
*DATA : BEGIN OF IT_FINAL OCCURS 0,
MATNR LIKE MARA-MATNR,
BLART LIKE BKPF-BLART, " doctype
BELNR LIKE BSEG-BELNR, "sr - nO 10
XBLNR LIKE BKPF-XBLNR , " Bill-no 16
NAME1_VENDOR(25),
"lfa1-name1, " Vendor Name 35
HKONT LIKE BSEG-HKONT , " Alloc-cd 10
MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
PON LIKE EKKO-EBELN , " PON 10
MAKTX LIKE MAKT-MAKTX, "Material text 40
MBLNR LIKE MSEG-MBLNR,
QTY(13) TYPE P DECIMALS 2 , "Qty 11
RATE(13) TYPE P DECIMALS 2 , "Rate 11
DISCOUNT(13) TYPE P DECIMALS 2, "DISCOUNT 11
PROD-AMT(13) TYPE P DECIMALS 2,
"AMOUNT 13
EXCISE(13) TYPE P DECIMALS 2 , "eXCISE TAX 11
SALES(13) TYPE P DECIMALS 2 , "SALES TAX 11
FREIGHT(13) TYPE P DECIMALS 2, "FREIGHT 11
OTHERS(13) TYPE P DECIMALS 2, " OTHERS 11
TOTAL(13) TYPE P DECIMALS 2, "TOTAL 17
END OF IT_FINAL.
*--vikky
DATA : BEGIN OF IT_FINAL_VN OCCURS 0,
NAME1_VENDOR(25),
"lfa1-name1, " Vendor Name 35
MATNR LIKE MARA-MATNR,
BLART LIKE BKPF-BLART, " doctype
BELNR LIKE BSEG-BELNR, "sr - nO 10
XBLNR LIKE BKPF-XBLNR , " Bill-no 16
HKONT LIKE BSEG-HKONT , " Alloc-cd 10
MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
PON LIKE EKKO-EBELN , " PON 10
MAKTX LIKE MAKT-MAKTX, "Material text 40
MBLNR LIKE MSEG-MBLNR,
QTY(8) TYPE P DECIMALS 2 , "Qty 11
RATE(9) TYPE P DECIMALS 2 , "Rate 11
DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
PROD-AMT(9) TYPE P DECIMALS 2,
"AMOUNT 13
EXCISE(5) TYPE P DECIMALS 2 , "eXCISE TAX 11
SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
FREIGHT(5) TYPE P DECIMALS 2, "FREIGHT 11
OTHERS(9) TYPE P DECIMALS 2, " OTHERS 11
TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
END OF IT_FINAL_VN.
End of Insert by B.Elan on 23/12/2005
DATA: BEGIN OF ITAB_DISPLAY OCCURS 0,
BLART LIKE BKPF-BLART, " doctype
BELNR LIKE BSEG-BELNR, "sr - nO 10
XBLNR LIKE BKPF-XBLNR , " Bill-no 16
NAME1_VENDOR(25), "lfa1-name1, " Vendor Name 35
HKONT LIKE BSEG-HKONT , " Alloc-cd 10
MWSKZ LIKE EKPO-MWSKZ , " St-cd 2
BUDAT LIKE BKPF-BUDAT , " Bill-dt 10
DUE_DATE LIKE BSEG-ZFBDT , " Due date 10
PON LIKE EKKO-EBELN , " PON 10
MAKTX LIKE MAKT-MAKTX, "Material text 40
QTY(8) TYPE P DECIMALS 2 , "Qty 11
"qty 5
RATE(5) TYPE P DECIMALS 2 , "Rate 11
mod starts on 21/08 for inc size to 7
RATE(9) TYPE P DECIMALS 2 , "Rate 11
"Rate 7
mod ends - sanjay jajoo 21/08
DISCOUNT(7) TYPE P DECIMALS 2, "DISCOUNT 11
PROD-AMT(9) TYPE P DECIMALS 2, "AMOUNT 13
EXCISE(5) TYPE P DECIMALS 2 , "eXCISE TAX 11
SALES(5) TYPE P DECIMALS 2 , "SALES TAX 11
FREIGHT(5) TYPE P DECIMALS 2, "FREIGHT 11
OTHERS(9) TYPE P DECIMALS 2, " OTHERS 11 " added by vik on
*21.08.2008
TOTAL(9) TYPE P DECIMALS 2, "TOTAL 17
TOTAL1(9) TYPE P DECIMALS 2,
MATNR LIKE MARA-MATNR,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
END OF ITAB_DISPLAY.
DATA: BEGIN OF ITAB_TOTAL1 OCCURS 0,
HKONT LIKE BSEG-HKONT,
TOTAL TYPE P DECIMALS 2,
TXT50 LIKE SKAT-TXT50,
END OF ITAB_TOTAL1.
DATA: BEGIN OF ITAB_KONV OCCURS 0,
KNUMV LIKE KONV-KNUMV,
KPOSN LIKE KONV-KPOSN,
STUNR LIKE KONV-STUNR,
ZAEHK LIKE KONV-ZAEHK,
KSCHL LIKE KONV-KSCHL,
KWERT LIKE KONV-KWERT,
END OF ITAB_KONV.
DATA:BEGIN OF ITAB_RATE_MODVAT OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MENGE LIKE EKPO-MENGE,
BRTWR LIKE EKPO-BRTWR,
KZWI5 LIKE EKPO-KZWI5,
KNUMV LIKE EKKO-KNUMV,
MATNR LIKE EKPO-MATNR,
TXZ01 LIKE EKPO-TXZ01,
END OF ITAB_RATE_MODVAT.
DATA: BEGIN OF ITAB_PO OCCURS 0,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
END OF ITAB_PO.
DATA: BEGIN OF ITAB_PO_ITEM OCCURS 0,
BELNR LIKE BSEG-BELNR,
EBELN LIKE BSEG-EBELN,
BUZID LIKE BSEG-BUZID,
XBLNR LIKE BKPF-XBLNR,
MATNR LIKE BSEG-MATNR,
EBELP LIKE BSEG-EBELP,
MENGE LIKE BSEG-MENGE,
WRBTR LIKE BSEG-WRBTR,
EXCISE LIKE BSEG-DMBTR, " ADDED ON 21/01/02 FOR 27500 EXCISE
SGTXT LIKE BSEG-SGTXT, " ADDED ON 24/01/02
FLAG,
END OF ITAB_PO_ITEM.
DATA:BEGIN OF I_LFA1 OCCURS 0,
LIFNR LIKE BSEG-LIFNR,
END OF I_LFA1.
DATA: BEGIN OF I_VENDOR OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF I_VENDOR.
DATA: BEGIN OF ITAB_PO_OTHERS OCCURS 0,
BELNR LIKE BSEG-BELNR,
MATNR LIKE BSEG-MATNR,
EBELN LIKE BSEG-EBELN,
EBELP LIKE BSEG-EBELP,
MENGE LIKE BSEG-MENGE,
WRBTR LIKE BSEG-WRBTR,
END OF ITAB_PO_OTHERS.
DATA: BEGIN OF ITAB_FINAL OCCURS 0,
BUKRS LIKE BSEG-BUKRS,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
BUZEI LIKE BSEG-BUZEI,
BUZID LIKE BSEG-BUZID,
SHKZG LIKE BSEG-SHKZG,
EBELN LIKE BSEG-EBELN,
EBELP LIKE BSEG-EBELP,
MENGE LIKE BSEG-MENGE,
WRBTR LIKE BSEG-WRBTR,
MATNR LIKE BSEG-MATNR,
HKONT LIKE BSEG-HKONT, " ADDED ON 21/01/02 FOR 27500 EXCISE
SGTXT LIKE BSEG-SGTXT, " ADDED ON 24/01/02 FOR SALES TAX
END OF ITAB_FINAL.
DATA : BEGIN OF ITAB OCCURS 100 ,
MWSKZ LIKE EKPO-MWSKZ , " St-cd
HKONT LIKE BSEG-HKONT , " Alloc-cd
MBLNR LIKE MKPF-MBLNR , " Sr-No
LIFNR LIKE LFA1-LIFNR , " Supp-cd
XBLNR LIKE BKPF-XBLNR , " Bill-no
BUDAT LIKE BKPF-BUDAT , " Bill-dt
DUE_DATE LIKE BSEG-ZFBDT , " Due date
PON LIKE EKKO-EBELN , " PON
BELNR LIKE BKPF-BELNR , " CCI no
DMBTR LIKE BSEG-DMBTR , " Prod-amount
EXCISE LIKE BSEG-DMBTR , " Excise / ModVAT
ST_INV LIKE BSEG-DMBTR , " Sales Tax Loaded on Inv.
ST_SET LIKE BSEG-DMBTR , " Sales Tax setoff .
OCT_TOT LIKE BSEG-DMBTR , " A,A, (29/03/2000) Octroi chargs
PT_PABLE LIKE BSEG-DMBTR , " Purchase tax payable
ST_TOT LIKE BSEG-DMBTR , " Sales Tax total
OTHR_CHRG LIKE BSEG-DMBTR , " Other chagres
NEBTR LIKE BSEG-NEBTR, " Total-amount
NAME1_VENDOR LIKE LFA1-NAME1, " Vendor Name
END OF ITAB.
DATA: BEGIN OF ITAB_DOC OCCURS 0,
BELNR LIKE BKPF-BELNR,
BLART LIKE BKPF-BLART,
END OF ITAB_DOC.
DATA : BEGIN OF DOCTAB OCCURS 100 ,
MWSKZ LIKE BSEG-MWSKZ ,
HKONT LIKE BSEG-HKONT ,
BELNR LIKE BKPF-BELNR ,
Changed By Pankaj 19.03.99
Included field fiscal year
GJAHR LIKE BKPF-GJAHR ,
BUDAT LIKE BKPF-BUDAT ,
XBLNR LIKE BKPF-XBLNR ,
LIFNR LIKE LFA1-LIFNR ,
ZTERM LIKE BSEG-ZTERM ,
AMOUNT LIKE BSEG-DMBTR ,
DMBTR LIKE BSEG-DMBTR ,
OTHR_CHRG LIKE BSEG-DMBTR ,
MBLNR LIKE MKPF-MBLNR ,
MJAHR LIKE MSEG-MJAHR ,
DUE_DATE LIKE BSEG-ZFBDT ,
PON LIKE EKKO-EBELN ,
JMO1 LIKE BSEG-DMBTR ,
JMO2 LIKE BSEG-DMBTR ,
JIP1 LIKE BSEG-DMBTR ,
JIP2 LIKE BSEG-DMBTR ,
************CH-ID-ADI-START-28 / 09 / 1999
JIP4 LIKE BSEG-DMBTR ,
ZTUT LIKE BSEG-DMBTR ,
*****************ABEY
ZOCT LIKE BSEG-DMBTR ,
*****************END
************CH-ID-ADI-START-28 / 09 / 1999
ZSET LIKE BSEG-DMBTR ,
ZPTX LIKE BSEG-DMBTR ,
BLART LIKE BKPF-BLART ,
END OF DOCTAB .
Download for EDP "EDP
DATA : BEGIN OF DOWNLOAD OCCURS 100 ,
SIGN1(1) ,
TOT_VAL(11) TYPE N,
SIGN2(1) ,
TAXABLE(11) TYPE N ,
SIGN3(1) ,
TOT_TAX(11) TYPE N ,
SIGN4(1) ,
SURCHARG(9) TYPE N ,
SIGN5(1) ,
ST_AMT(9) TYPE N ,
SIGN6(1) ,
OTH_CHRG(9) TYPE N ,
******************************ch-adi-start-28 / 09 / 1999
SIGN7(1),
TOT(9) TYPE N,
******************************ch-adi-end-28 / 09 / 1999
TYPE(1) TYPE N ,
STKY1(1) TYPE N ,
STBR(2) ,
STDV(2) ,
STCC(1) ,
STKY(1) ,
STDC(2) TYPE N ,
STTYP(1) ,
STCODE(2) ,
STRATE(2) TYPE N ,
STRTT(2) TYPE N ,
SERIAL_NO(6) TYPE N ,
STACP(9) ,
BLANK1(3) ,
STYRMN(6) ,
BLANK2(7) TYPE C .
DATA : END OF DOWNLOAD .
DATA : BEGIN OF GLTAB OCCURS 5 ,
MWSKZ LIKE BSEG-MWSKZ, " << ADD A.A. (01.02.2000)
HKONT LIKE BSEG-HKONT ,
DMBTR LIKE BSEG-DMBTR , " Prod-amount
EXCISE LIKE BSEG-DMBTR , " Excise / ModVAT
ST_INV LIKE BSEG-DMBTR , " Sales Tax Loaded on Inv.
ST_SET LIKE BSEG-DMBTR , " Sales Tax setoff .
PT_PABLE LIKE BSEG-DMBTR , " Purchase tax payable
ST_TOT LIKE BSEG-DMBTR , " Sales Tax total
OTHR_CHRG LIKE BSEG-DMBTR , " Other Charges
NEBTR LIKE BSEG-NEBTR. " Total-amount
DATA : END OF GLTAB .
DATA : BEGIN OF ERRORTAB OCCURS 5 .
INCLUDE STRUCTURE ITAB .
DATA : END OF ERRORTAB .
*- Start of change by Raj on 3-Spet-05
DATA : V_TMPVAL TYPE P DECIMALS 2.
*- End of change by Raj on 3-Spet-05
DATA : STRING LIKE BKPF-AWKEY ,
V_NO TYPE I,
V_EBELN LIKE BSEG-EBELN,
V_MATNR LIKE BSEG-MATNR. " ADDED ON 21/01/02 FOR BUZID = 'S'
Start of Insert by B.Elan on 23/12/2005
WORK AREA
DATA : WA_DISPLAY LIKE ITAB_DISPLAY.
DATA : V_UCOMM TYPE SY-UCOMM.
CONSTANTS : C_X TYPE C VALUE 'X'.
End of Insert by B.Elan on 23/12/2005
AT SELECTION-SCREEN ON T_BUKRS.
SELECT SINGLE * FROM T001 WHERE BUKRS = T_BUKRS .
IF SY-SUBRC NE 0 .
MESSAGE E368 WITH T_BUKRS TEXT-M01 .
ENDIF .
AT SELECTION-SCREEN ON T_MONAT.
PERFORM check_period_year USING 'X'. " COMMENTED
AT SELECTION-SCREEN ON T_GJAHR.
PERFORM check_period_year USING ' '. "COMMENTED
Start of Delete by B.Elan on 23/12/2005
*AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1 .
CLEAR fname .
DATA : BEGIN OF xt247 OCCURS 12 .
INCLUDE STRUCTURE t247 .
DATA : END OF xt247 .
CHECK dload EQ 'X' .
REFRESH xt247 .
IF poper EQ 'X' .
MESSAGE e368 WITH text-m05 .
ENDIF .
CALL FUNCTION 'MONTH_NAMES_GET'
TABLES
month_names = xt247
EXCEPTIONS
month_names_not_found = 1
OTHERS = 2.
READ TABLE xt247 WITH KEY mnr = t_monat .
CONCATENATE 'STAXSUMM.' xt247-ktx INTO fname .
CONCATENATE '
DOWNLOAD\' fname INTO fname1.
CONCATENATE zfile1 fname INTO zfile2.
CONDENSE fname1 NO-GAPS.
CONDENSE zfile2 NO-GAPS.
CONCATENATE 'STAXSUMM.' xt247-ktx INTO fname .
End of Delete by B.Elan on 23/12/2005
AT SELECTION-SCREEN OUTPUT .
LOOP AT SCREEN .
IF SCREEN-NAME EQ 'FNAME' .
SCREEN-INPUT = 0.
MODIFY SCREEN .
ENDIF .
IF SCREEN-GROUP2 EQ 'DBS' .
SCREEN-ACTIVE = 0 .
MODIFY SCREEN .
IF SCREEN-NAME EQ 'BR_BLART-LOW' .
Form the select option for the LDB .
CLEAR BR_BLART . REFRESH BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'RE' .
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'SR' .
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'SP' .
APPEND BR_BLART . " ADD ON 11122003 JAJ
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
br_blart-low = 'VI' .
BR_BLART-LOW = 'ST'.
APPEND BR_BLART .
BR_BLART-LOW = 'S1'.
APPEND BR_BLART .
BR_BLART-LOW = 'P1'.
APPEND BR_BLART .
BR_BLART-LOW = 'PM'.
APPEND BR_BLART .
BR_BLART-LOW = 'R1'.
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'KR' .
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
*************CH-ID-ADI---30 / 09 / 1999.
BR_BLART-LOW = 'RA'.
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'EM'.
APPEND BR_BLART .
BR_BLART-SIGN = 'I' .
BR_BLART-OPTION = 'EQ' .
BR_BLART-LOW = 'EI' .
APPEND BR_BLART .
ENDIF .
ENDIF .
CHECK SCREEN-GROUP1 EQ 'DAT' .
SCREEN-INPUT = 0.
MODIFY SCREEN .
ENDLOOP .
START-OF-SELECTION .
Block 1 - Selection of accounting documents in the posting period
is done through the LDB
GET BKPF .
commented on 22/08
CHECK BKPF-MONAT = T_MONAT.
CHECK BKPF-MONAT IN T_MONAT.
CHECK BKPF-GJAHR = T_GJAHR.
CHECK BKPF-STBLG IS INITIAL . "<<<< Reversed
*CHECK bkpf-budat IN t_budat .
CHECK BKPF-BUKRS EQ T_BUKRS .
CHECK BKPF-BUKRS EQ T_BUKRS .
CHECK BKPF-BSTAT EQ SPACE . "<<< Sample docs
CHECK BKPF-BLART EQ 'RE' "MM-IV
OR BKPF-BLART EQ 'KR' "FI-IV
OR bkpf-blart EQ 'VI' "FI-IV Direct
*************CH-ID-ADI-30 / 09 / 1999
OR bkpf-blart EQ 'RA' "CASH CCI
OR bkpf-blart EQ 'EM' "MAINTAINANCE
OR bkpf-blart EQ 'EI' . "IDT
OR BKPF-BLART EQ 'P1'
OR BKPF-BLART EQ 'PM'
OR BKPF-BLART EQ 'R1'
OR BKPF-BLART EQ 'S1'
OR BKPF-BLART EQ 'ST'
OR BKPF-BLART EQ 'SR' " ADD ON 101203 JAJ
OR BKPF-BLART EQ 'SP'.
*************CH-ID-ADI-30 / 09 / 1999
CLEAR DOCTAB .
DOCTAB-BLART = BKPF-BLART .
DOCTAB-BELNR = BKPF-BELNR .
DOCTAB-BUDAT = BKPF-BUDAT .
DOCTAB-XBLNR = BKPF-XBLNR .
Added By Pankaj 19.03.99
Initializing fiscal year for document table
DOCTAB-GJAHR = BKPF-GJAHR .
APPEND DOCTAB.
Tax details
GET BSET . " Commented because LDB gives wrong BSET entries
" for some documents
CASE BSET-KSCHL .
WHEN 'JMO1' .
DOCTAB-JMO1 = DOCTAB-JMO1 + BSET-HWSTE .
WHEN 'JMO2' .
DOCTAB-JMO2 = DOCTAB-JMO2 + BSET-HWSTE .
WHEN 'JIP1' .
DOCTAB-JIP1 = DOCTAB-JIP1 + BSET-HWSTE .
WHEN 'JIP2' .
DOCTAB-JIP2 = DOCTAB-JIP2 + BSET-HWSTE .
WHEN 'ZSET' .
break deven .
DOCTAB-ZSET = DOCTAB-ZSET + BSET-HWSTE .
WHEN 'ZPTX' .
DOCTAB-ZPTX = DOCTAB-ZPTX + BSET-HWSTE .
ENDCASE .
DOCTAB-MWSKZ = BSET-MWSKZ.
MODIFY DOCTAB INDEX SY-TABIX.
Item details
*changed by srinivas yerra.
GET BSEG .
IF BSEG-KOART = 'K' . "<<< Vendor Line
IF BSEG-KOART = 'K' .
*end of chnages by srinivas yerra.
DOCTAB-LIFNR = BSEG-LIFNR .
IF NOT BSEG-ZTERM IS INITIAL .
DOCTAB-ZTERM = BSEG-ZTERM .
DOCTAB-DUE_DATE = BSEG-ZFBDT + BSEG-ZBD1T .
ENDIF .
IF BSEG-SHKZG EQ 'H' . "<< Add credits
DOCTAB-AMOUNT = DOCTAB-AMOUNT + BSEG-DMBTR .
ELSE . "<< Subtr debits
DOCTAB-AMOUNT = DOCTAB-AMOUNT - BSEG-DMBTR .
ENDIF .
ENDIF .
CASE BSEG-KTOSL .
WHEN 'WRX' .
DOCTAB-PON = BSEG-EBELN .
IF DOCTAB-MWSKZ IS INITIAL .
DOCTAB-MWSKZ = BSEG-MWSKZ .
ENDIF .
WHEN 'BSX' .
***********ABEY
IF NEXT = BSEG-BUZEI
AND
DOC = BSEG-BELNR
AND
( BSEG-BUZID = 'M'
OR
BSEG-HKONT = 50765 ).
DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
IF BSEG-SHKZG EQ 'H' . "<< Subtr credits
DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG - BSEG-DMBTR .
ELSE . "<< Add debits
DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG + BSEG-DMBTR .
ENDIF .
ENDIF .
************END
IF BSEG-SHKZG EQ 'S' .
DOCTAB-DMBTR = DOCTAB-DMBTR + BSEG-DMBTR .
ELSE .
DOCTAB-DMBTR = DOCTAB-DMBTR - BSEG-DMBTR .
ENDIF .
WHEN 'OCT' OR 'FRE' OR 'FR1' OR SPACE .
*****CH-ID-ADI-30 / 09 /1999.
IF ( ( BKPF-BLART = 'EM' OR BKPF-BLART = 'RA' OR BKPF-BLART =
'EI')
AND BSEG-KTOSL = SPACE ) OR BSEG-MWSKZ = '9W' OR BSEG-MWSKZ =
'K9' OR
BSEG-MWSKZ =
'X9'.
DOCTAB-OTHR_CHRG = 0.
ELSE.
*********CH-ID-ADI--01 / 10 / 1999
Other Charges only for accounts other than vendor acc.
CHECK BSEG-BUZID NE 'T' .
CHECK BSEG-BUZID NE 'P' .
IF BSEG-KOART NE 'K' .
*********ABEY (25/02/2000), (21/02/2000)
IF BSEG-BUZID = 'F'
OR BSEG-HKONT = 75461.
NEXT = BSEG-BUZEI + 1.
DOC = BSEG-BELNR.
DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
ENDIF.
IF BSEG-BUZEI = NEXT
AND
( BSEG-BUZID = 'M'
OR
BSEG-HKONT = 50765 ).
DOCTAB-ZOCT = DOCTAB-ZOCT + BSEG-DMBTR.
ENDIF.
*********END
IF BSEG-SHKZG EQ 'H' . "<< Subtr credits
DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG - BSEG-DMBTR .
ELSE . "<< Add debits
DOCTAB-OTHR_CHRG = DOCTAB-OTHR_CHRG + BSEG-DMBTR .
ENDIF .
ENDIF .
*****NEXT-LINE ADDED BY ADI
ENDIF .
*************END.
ENDCASE .
*CHANGED BY SRINIVAS YERRA
*MODIFY DOCTAB INDEX SY-TABIX.
APPEND DOCTAB.
*END OF CHANGES.
PO History
GET EKBE .
CHECK DOCTAB-BELNR EQ EKBE-BELNR .
DOCTAB-MBLNR = EKBE-LFBNR .
DOCTAB-MJAHR = EKBE-LFGJA .
MODIFY DOCTAB INDEX SY-TABIX .
PERFORM show_indicator USING text-m02 .
*PERFORM convert_data.
END-OF-SELECTION .
Data read from LDB is converted into printable format.
PERFORM SHOW_INDICATOR USING TEXT-M04 .
PERFORM CONVERT_DATA .
Start of Delete by B.Elan on 23/12/2005
IF stax_reg EQ 'X' . "<<< Add
SORT itab BY mwskz hkont belnr .
ELSE . "<<< Add
SORT itab BY belnr . "<<< Add
SORT itab BY pon.
ENDIF . "<<< Add
Perform further operation based on user input
IF display EQ 'X' .
PERFORM write_itab.
PERFORM write_data .
ELSE .
PERFORM download_data .
ENDIF .
End of Delete by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
SORT ITAB BY BELNR.
PERFORM WRITE_DATA.
IF MAT_SM = C_X.
PERFORM WRITE_MATERIAL_SUMMARY.
ELSEIF MAT_DT = C_X.
PERFORM WRITE_MATERIAL_DETAILS.
ELSEIF VEN_SM = C_X.
PERFORM WRITE_VENDOR_SUMMARY.
ELSEIF VEN_DT = C_X.
PERFORM WRITE_VENDOR_DETAILS.
ENDIF.
End of Insert by B.Elan on 23/12/2005
Start of Insert by B.Elan on 23/12/2005
AT USER-COMMAND.
V_UCOMM = SY-UCOMM.
CASE V_UCOMM.
WHEN 'DETLS'.
NEW-PAGE.
PUR_DB = C_X.
PERFORM CLEAR_DETAILS.
PERFORM WRITE_DATA.
WHEN 'MSUMRY'.
PERFORM WRITE_MATERIAL_SUMMARY.
WHEN 'MDETL'.
PERFORM WRITE_MATERIAL_DETAILS.
WHEN 'VSUMRY'.
PERFORM WRITE_VENDOR_SUMMARY.
WHEN 'VDETL'.
PERFORM WRITE_VENDOR_DETAILS.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
End of Insert by B.Elan on 23/12/2005
*- - - - - - - - - End Of Execution .- - - - - - - - - - - - - - - - - -
TOP-OF-PAGE .
IF PUR_DB = C_X.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_PUR_DB.
ELSEIF MAT_SM = C_X.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_MAT_SM.
ELSEIF MAT_DT = C_X.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_MAT_DT.
ELSEIF VEN_SM = C_X.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_VEN_SM.
ELSEIF VEN_DT = C_X.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_VEN_DT.
ENDIF.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE V_UCOMM.
WHEN 'DETLS'.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_PUR_DB.
WHEN 'MSUMRY'.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_MAT_SM.
WHEN 'MDETL'.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_MAT_DT.
WHEN 'VSUMRY'.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_VEN_SM.
WHEN 'VDETL'.
PERFORM TOP_OF_PAGE.
PERFORM TOP_OF_PAGE_VEN_DT.
ENDCASE.
*& Form WRITE_DATA
text *
FORM WRITE_DATA.
DATA: V_SALES LIKE ITAB_DISPLAY-SALES,
V_RATE LIKE ITAB_DISPLAY-RATE,
V_DISCOUNT LIKE ITAB_DISPLAY-DISCOUNT,
V_PROD-AMT LIKE ITAB_DISPLAY-PROD-AMT,
V_EXCISE1 LIKE ITAB_DISPLAY-EXCISE,
V_EXCISE LIKE ITAB_DISPLAY-EXCISE,
V_PON LIKE ITAB_DISPLAY-PON,
V_OTHERS LIKE ITAB_DISPLAY-OTHERS,
V_FREIGHT LIKE ITAB_DISPLAY-FREIGHT.
CLEAR ITAB .
Write the correct data i.e. tax code and G/L code both available .
LOOP AT ITAB .
*************CH-ID-ADI-30 / 09 / 1999
IF ( ITAB-MWSKZ = '9W' OR ITAB-MWSKZ = 'K9' OR ITAB-MWSKZ = 'X9' )
AND ITAB-OTHR_CHRG NE 0 .
ITAB-DMBTR = ITAB-OTHR_CHRG.
ITAB-OTHR_CHRG = 0.
MODIFY ITAB.
ENDIF.
ENDLOOP.
LOOP AT ITAB.
I_LFA1-LIFNR = ITAB-LIFNR.
APPEND I_LFA1.
CLEAR I_LFA1.
ENDLOOP.
SORT I_LFA1.
DELETE ADJACENT DUPLICATES FROM I_LFA1 COMPARING ALL FIELDS.
SELECT LIFNR
NAME1
FROM LFA1 INTO TABLE I_VENDOR
FOR ALL ENTRIES IN I_LFA1 WHERE
LIFNR = I_LFA1-LIFNR.
FREE I_LFA1.
LOOP AT ITAB.
READ TABLE I_VENDOR WITH KEY LIFNR = ITAB-LIFNR .
IF SY-SUBRC EQ 0.
ITAB-NAME1_VENDOR = I_VENDOR-NAME1.
MODIFY ITAB TRANSPORTING NAME1_VENDOR.
ENDIF.
ENDLOOP.
LOOP AT ITAB.
IF NOT ITAB-LIFNR IN S_VENDOR.
DELETE ITAB.
ENDIF.
ENDLOOP.
SELECT BUKRS BELNR GJAHR BUZEI BUZID SHKZG EBELN EBELP ERFMG WRBTR
MATNR HKONT SGTXT " ERFMG for MENGE,HKONT,SGTXT Added by KrishnaMohan
INTO TABLE ITAB_FINAL
FROM BSEG FOR ALL ENTRIES IN ITAB
WHERE BUKRS = T_BUKRS AND "'1000' AND
BELNR = ITAB-BELNR AND
*added by srinivas
hkont in zgl and
*end
GJAHR = T_GJAHR AND
*- Start of change by Raj on 030905
buzid IN ('W', 'M', 'K', 'S', 'F' , 'P' ) AND
BUZID IN ('W', 'M', 'K', 'S', 'F' , 'P' , 'T', ' ') AND
" ADD T 090206 JAJ
KOART <> 'K' AND " mod by vik on 21.08.2008" sjaj si
*- End of change by Raj on 030905
BUZID = P Added on 21/01/02 by Krishna Mohan
GSBER IN P_GSBER AND
gsber IN p_gsber OR gsber = ' ' AND
MATNR IN S_MATNR.
SELECT BELNR BLART INTO TABLE ITAB_DOC FROM BKPF
FOR ALL ENTRIES IN ITAB_FINAL WHERE
BUKRS = T_BUKRS AND "'1000' AND
BELNR = ITAB_FINAL-BELNR AND
GJAHR = T_GJAHR AND
BLART NOT IN ('WA' , 'WE').
SORT ITAB_DOC BY BELNR BLART.
LOOP AT ITAB_DOC.
IF NOT ITAB_DOC-BLART IN S_DOCTYP .
DELETE ITAB_DOC.
ENDIF.
ENDLOOP.
LOOP AT ITAB_FINAL.
READ TABLE ITAB_DOC WITH KEY BELNR = ITAB_FINAL-BELNR BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE ITAB_FINAL.
ENDIF.
ENDLOOP.
DELETE ITAB_FINAL WHERE BUZID = 'K' AND BUZEI = '1'.
LOOP AT ITAB_FINAL WHERE SHKZG = 'H'.
ITAB_FINAL-WRBTR = ITAB_FINAL-WRBTR * ( -1 ).
MODIFY ITAB_FINAL TRANSPORTING WRBTR.
ENDLOOP.
LOOP AT ITAB_FINAL WHERE BUZID = 'M'.
IF ITAB_FINAL-SGTXT NE ' '.
TRANSLATE ITAB_FINAL-SGTXT TO UPPER CASE.
MODIFY ITAB_FINAL.
ENDIF.
ENDLOOP.
LOOP AT ITAB_FINAL .
IF ITAB_FINAL-BUZID = 'W'.
CLEAR V_MATNR.
V_EBELN = ITAB_FINAL-EBELN.
V_MATNR = ITAB_FINAL-MATNR.
ITAB_PO_ITEM-BELNR = ITAB_FINAL-BELNR.
ITAB_PO_ITEM-BUZID = ITAB_FINAL-BUZID.
ITAB_PO_ITEM-MATNR = ITAB_FINAL-MATNR.
ITAB_PO_ITEM-EBELN = ITAB_FINAL-EBELN.
ITAB_PO_ITEM-EBELP = ITAB_FINAL-EBELP.
ITAB_PO_ITEM-MENGE = ITAB_FINAL-MENGE.
ITAB_PO_ITEM-WRBTR = ITAB_FINAL-WRBTR.
COLLECT ITAB_PO_ITEM.
CLEAR ITAB_PO_ITEM.
ELSEIF ITAB_FINAL-BUZID = 'M' OR ITAB_FINAL-BUZID = 'K' OR
ITAB_FINAL-BUZID = 'S' OR
ITAB_FINAL-BUZID = 'P' OR " ADDED ON 21/01/02
*- Start of change by Raj on 030905
ITAB_FINAL-BUZID = ' ' OR
ITAB_FINAL-BUZID = 'T' OR " ADD BY JAJ ON 090206
*- End of change by Raj on 030905
ITAB_FINAL-BUZID = 'F'.
IF ITAB_FINAL-MATNR IS INITIAL.
ITAB_FINAL-MATNR = V_MATNR.
ENDIF.
CLEAR V_MATNR.
ITAB_PO_OTHERS-BELNR = ITAB_FINAL-BELNR.
ITAB_PO_OTHERS-MATNR = ITAB_FINAL-MATNR.
ITAB_PO_OTHERS-EBELN = ITAB_FINAL-EBELN.
ITAB_PO_OTHERS-EBELP = ITAB_FINAL-EBELP.
ITAB_PO_OTHERS-MENGE = ITAB_FINAL-MENGE.
ITAB_PO_OTHERS-WRBTR = ITAB_FINAL-WRBTR.
IF CONDITION,ADDED ON 21/01/02 FOR GETTING EXCISE WHEN CONDITION MEETS
ie TOTAL AMOUNT = EXCISE WHEN BUZID = S AND HKONT = 27500
*IF itab_final-buzid = 'S' AND ( itab_final-hkont = '0000027500' OR "
*COMM BY JAJ ON 090206
IF ITAB_FINAL-BUZID = 'S' OR ITAB_FINAL-BUZID = 'T' AND (
ITAB_FINAL-HKONT = '0000027500' OR
ITAB_FINAL-HKONT = '0000027515'
OR ITAB_FINAL-HKONT = '0000027550' " jaj on 090206
OR ITAB_FINAL-HKONT = '0000027507' OR
ITAB_FINAL-HKONT = '0000027508'). "Added on 050905 - Raj
ITAB_FINAL-EBELN = V_EBELN.
to get ebeln value into header so that when there are 2 po's
and 2 W's excise can go into only one po which is v_ebeln
Start of insert by B.Elan on 10/02/2006
READ TABLE ITAB_PO_ITEM WITH KEY BELNR = ITAB_FINAL-BELNR
EBELN = ITAB_FINAL-EBELN
MATNR = ITAB_FINAL-MATNR.
ITAB_PO_ITEM-EXCISE = ITAB_PO_ITEM-EXCISE + ITAB_FINAL-WRBTR.
End of insert by B.Elan on 10/02/2006
Start of delete by B.Elan on 10/02/2006
itab_po_item-excise = itab_final-wrbtr.
End of delete by B.Elan on 10/02/2006
MODIFY ITAB_PO_ITEM TRANSPORTING EXCISE
WHERE BELNR EQ ITAB_FINAL-BELNR AND
EBELN EQ ITAB_FINAL-EBELN.
CLEAR ITAB_PO_ITEM.
ELSE.
COLLECT ITAB_PO_OTHERS.
ENDIF.
CLEAR ITAB_PO_OTHERS.
ENDIF.
ENDLOOP.
sateesh
SORT ITAB_PO_ITEM BY BELNR EBELN.
LOOP AT ITAB_PO_ITEM.
AT NEW BELNR.
AT NEW EBELN.
READ TABLE ITAB_PO_ITEM INDEX SY-TABIX.
ITAB_PO_ITEM-FLAG = 'X'.
MODIFY ITAB_PO_ITEM INDEX SY-TABIX.
ENDAT.
ENDAT.
ENDLOOP.
LOOP AT ITAB_PO_ITEM.
ITAB_PO_ITEM-EXCISE = 0.
MODIFY ITAB_PO_ITEM TRANSPORTING EXCISE
WHERE EXCISE > 0
AND FLAG = SPACE.
ENDLOOP.
end
LOOP AT ITAB_PO_ITEM.
ITAB_PO-EBELN = ITAB_PO_ITEM-EBELN.
ITAB_PO-EBELP = ITAB_PO_ITEM-EBELP.
APPEND ITAB_PO.
CLEAR ITAB_PO.
ENDLOOP.
LOOP AT ITAB_PO_OTHERS.
ITAB_PO-EBELN = ITAB_PO_OTHERS-EBELN.
ITAB_PO-EBELP = ITAB_PO_OTHERS-EBELP.
APPEND ITAB_PO.
CLEAR ITAB_PO.
ENDLOOP.
SORT ITAB_PO.
DELETE ADJACENT DUPLICATES FROM ITAB_PO COMPARING ALL FIELDS.
SELECT EKPO~EBELN
EBELP
MENGE
BRTWR
KZWI5
EKKO~KNUMV
EKPO~MATNR
EKPO~TXZ01
INTO TABLE ITAB_RATE_MODVAT
FROM EKPO INNER JOIN EKKO
ON EKPO~EBELN = EKKO~EBELN
FOR ALL ENTRIES IN ITAB_PO WHERE
EKPO~EBELN = ITAB_PO-EBELN AND
EBELP = ITAB_PO-EBELP.
SELECT KNUMV KPOSN STUNR ZAEHK KSCHL KWERT
INTO TABLE ITAB_KONV
FROM KONV
FOR ALL ENTRIES IN ITAB_RATE_MODVAT
WHERE KNUMV = ITAB_RATE_MODVAT-KNUMV AND
KSCHL IN ('YT02', 'YF07', 'YOTH', 'YPF1', 'YD01', 'YD02', 'YD03' ) .
SORT ITAB_KONV BY KNUMV KSCHL.
SORT ITAB BY BELNR.
SORT ITAB_RATE_MODVAT BY EBELN EBELP.
SORT ITAB_PO_OTHERS BY BELNR MATNR.
LOOP AT ITAB_PO_ITEM.
ITAB_DISPLAY-BELNR = ITAB_PO_ITEM-BELNR.
READ TABLE ITAB_DOC WITH KEY BELNR = ITAB_PO_ITEM-BELNR BINARY
SEARCH.
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-BLART = ITAB_DOC-BLART.
ENDIF.
READ TABLE ITAB WITH KEY BELNR = ITAB_PO_ITEM-BELNR BINARY SEARCH.
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-XBLNR = ITAB-XBLNR.
ITAB_PO_ITEM-XBLNR = ITAB-XBLNR.
ITAB_DISPLAY-NAME1_VENDOR = ITAB-NAME1_VENDOR.
ITAB_DISPLAY-HKONT = ITAB-HKONT.
ITAB_DISPLAY-MWSKZ = ITAB-MWSKZ.
ITAB_DISPLAY-BUDAT = ITAB-BUDAT.
ITAB_DISPLAY-DUE_DATE = ITAB-DUE_DATE.
ITAB_DISPLAY-PON = ITAB_PO_ITEM-EBELN.
ENDIF.
ITAB_DISPLAY-QTY = ITAB_PO_ITEM-MENGE.
READ TABLE ITAB_RATE_MODVAT WITH KEY EBELN = ITAB_PO_ITEM-EBELN
EBELP = ITAB_PO_ITEM-EBELP
BINARY SEARCH.
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-PON = ITAB_PO_ITEM-EBELN.
ITAB_DISPLAY-MATNR = ITAB_RATE_MODVAT-MATNR.
ITAB_DISPLAY-MAKTX = ITAB_RATE_MODVAT-TXZ01.
ITAB_DISPLAY-RATE = ITAB_RATE_MODVAT-BRTWR /
ITAB_RATE_MODVAT-MENGE.
ITAB_DISPLAY-PROD-AMT = ITAB_DISPLAY-RATE * ITAB_PO_ITEM-MENGE.
IF ITAB_PO_ITEM-EXCISE NE 0.
ITAB_DISPLAY-EXCISE = ITAB_PO_ITEM-EXCISE.
ELSE.
*ITAB_DISPLAY-EXCISE = ( ITAB_PO_ITEM-MENGE * ITAB_RATE_MODVAT-KZWI5 ) /
ITAB_RATE_MODVAT-MENGE.
*commentedon 210102 to get excise directly from BSEG - IV
ENDIF.
ENDIF.
READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
KPOSN = ITAB_RATE_MODVAT-EBELP
KSCHL = 'YT02' .
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-SALES = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
ITAB_RATE_MODVAT-MENGE.
READ TABLE ITAB_FINAL WITH KEY BELNR = ITAB_PO_ITEM-BELNR
BUZID = 'M'
SGTXT(9) = 'SALES TAX'.
IF SY-SUBRC EQ 0.
IF ITAB_FINAL-SGTXT(9) EQ 'SALES TAX'
OR ITAB_FINAL-SGTXT(9) EQ 'sales tax'.
ITAB_DISPLAY-SALES = ITAB_DISPLAY-SALES + ITAB_FINAL-WRBTR.
ENDIF.
ENDIF.
ENDIF.
READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
KPOSN = ITAB_RATE_MODVAT-EBELP
KSCHL = 'YF07'.
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-FREIGHT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
ITAB_RATE_MODVAT-MENGE.
ENDIF.
READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
KPOSN = ITAB_RATE_MODVAT-EBELP
KSCHL = 'YD01' .
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
ITAB_RATE_MODVAT-MENGE.
ELSE.
READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
KPOSN = ITAB_RATE_MODVAT-EBELP
KSCHL = 'YD02' .
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT )
ITAB_RATE_MODVAT-MENGE.
ELSE.
READ TABLE ITAB_KONV WITH KEY KNUMV = ITAB_RATE_MODVAT-KNUMV
KPOSN = ITAB_RATE_MODVAT-EBELP
KSCHL = 'YD03' .
IF SY-SUBRC EQ 0.
ITAB_DISPLAY-DISCOUNT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT
ITAB_RATE_MODVAT-MENGE.
ENDIF.
ENDIF.
ENDIF.
LOOP AT ITAB_KONV WHERE KNUMV = ITAB_RATE_MODVAT-KNUMV AND KPOSN =
ITAB_RATE_MODVAT-EBELP AND
( KSCHL = 'YPF1' OR KSCHL = 'YOTH' ) .
ITAB_KONV-KWERT = ( ITAB_PO_ITEM-MENGE * ITAB_KONV-KWERT ) /
ITAB_RATE_MODVAT-MENGE.
ITAB_DISPLAY-OTHERS = ITAB_DISPLAY-OTHERS + ITAB_KONV-KWERT.
ENDLOOP.
READ TABLE ITAB_PO_OTHERS WITH KEY BELNR = ITAB_PO_ITEM-BELNR.
EBELN = ITAB_PO_ITEM-EBELN.
BINARY SEARCH.
sateesh as on 10092003
IF SY-SUBRC NE 0. CLEAR ITAB_PO_OTHERS. ENDIF.
end
IF NOT ITAB_PO_OTHERS-EBELN IS INITIAL.
READ TABLE ITAB_PO_OTHERS WITH KEY EBELN = ITAB_PO_ITEM-EBELN
EB -
Hi All,
I want to know how to create a button in alv report .
Please respond to my query.
Thanks and Regards,
Amanhi aman,
u can try this example:
where i have a created a button:
*& Report Z_GURU_ALV_EVENT01 *
report z_guru_alv_event01 .
tables: mara, makt.
type-pools slis.
data: begin of imara occurs 0,
matnr like mara-matnr,
ernam like mara-ernam,
ersda like mara-ersda,
end of imara.
data: begin of imakt occurs 0,
matnr like mara-matnr,
spras like makt-spras,
maktx like makt-maktx,
end of imakt.
data: ffc type slis_t_fieldcat_alv,
ievents type slis_t_event with header line,
iievent type slis_t_event with header line.
select-options: s_matnr for mara-matnr.
initialization.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = ievents[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table ievents with key name = slis_ev_top_of_page.
ievents-form = 'TOPP'.
modify ievents transporting form where name = slis_ev_top_of_page.
clear ievents.
read table ievents with key name = slis_ev_user_command.
ievents-form = 'USR_COM'.
modify ievents transporting form where name = slis_ev_user_command.
clear ievents.
read table ievents with key name = slis_ev_pf_status_set.
ievents-form = 'PFSTAT'.
modify ievents transporting form where name = slis_ev_pf_status_set.
clear ievents.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = iievent[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table iievent with key name = slis_ev_pf_status_set.
iievent-form = 'PFSTAT'.
modify iievent transporting form where name = slis_ev_pf_status_set.
clear iievent.
read table iievent with key name = slis_ev_user_command.
iievent-form = 'USERCOM'.
modify iievent transporting form where name = slis_ev_user_command.
clear iievent.
start-of-selection.
select matnr ernam ersda from mara into table imara where matnr
in s_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = sy-repid
i_internal_tabname = 'IMARA'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = sy-repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
i_callback_top_of_page = 'ALV_BACKGROUND'
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
i_callback_html_end_of_list = 'ALV_BACKGROUND'
I_STRUCTURE_NAME =
i_background_id = 'ALV_BACKGROUND'
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = ffc
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = ievents[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = imara
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
form topp.
data: it_top type slis_t_listheader,"having s , h ,a
wa type slis_listheader.
IT_SPEC TYPE SLIS_T_SPECIALCOL_ALV,
WA1 TYPE SLIS_SPECIALCOL_ALV.
wa-typ = 'H'.
wa-info = 'RELIANCE GLOBAL SERVICES' .
append wa to it_top.
clear wa.
wa-typ = 'S'.wa-key = 'NO:23'.
wa-info = 'TRIPLICANE HIGH ROAD'.
append wa to it_top.
clear wa.
wa-typ = 'S'.
wa-info = 'TRIPLICANE'.
append wa to it_top.
clear wa.
wa-typ = 'A'.
wa-info = 'sample'.
append wa to it_top.
clear wa.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = it_top
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
I_ALV_FORM =
endform.
form usr_com using r_ucomm type sy-ucomm r_selfield type slis_selfield.
case r_ucomm.
when 'CANC'.
leave to screen 0.
endcase.
data: ff type slis_t_fieldcat_alv.
data: v_vbeln(18) type n.
v_vbeln = r_selfield-value.
select matnr spras maktx
from makt into table imakt
up to 10 rows
where matnr = v_vbeln.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = sy-repid
i_internal_tabname = 'IMAKT'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = sy-repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = ff
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = ff
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = iievent[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = imakt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. "USR_COM
form pfstat using extab type slis_t_extab.
set pf-status 'STD' excluding extab.
endform. " pfstat
form usercom using rucom type sy-ucomm rselfield type slis_selfield.
case rucom.
when 'CANC'.
leave to screen 0.
endcase.
data: ffc type slis_t_fieldcat_alv,
v_matnr(18) type n.
v_matnr = rselfield-value.
select matnr ernam ersda from mara into table imara
where matnr = v_matnr.
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = sy-repid
i_internal_tabname = 'IMARA'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
i_inclname = sy-repid
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
changing
ct_fieldcat = ffc
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
it_fieldcat = ffc
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = iievent[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = imara
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. -
Add buttons in ALV Report output
Dear Friends,
I am developing one ALV report in PP moule for calculating Shelf Life. The output is coming properly in ALV.
But my additional requirement is ADD coustomise buttons in ALV Reports.
Please give me an idea how can I insert buttons in my alv report?
Thanks & Regards
VasuHi vasu,
consider the code given below.
FORM F4200_PF_STATUS_SET *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
The PF status is an exact copy of the PF status 'STANDARD' of program
SAPLSALV but with command 'CHNG' added to it.
SET PF-STATUS 'ZSOM_STANDARD' EXCLUDING i_extab.
ENDFORM.
*& Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'. " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'. " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'. " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'. " Information.
APPEND ws_fcode TO i_extab.
ENDFORM. " f4210_exclude_fcodes
*& Form f4300_user_command
FORM f4300_user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
CASE ucomm.
WHEN '&IC1'. "Double Click line Item
READ TABLE i_data INDEX selfield-tabindex.
IF i_data-qmnum NE space.
SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
CLEAR ucomm.
ENDIF.
WHEN 'CHNG'. " Change Notification Icon
READ TABLE i_data INDEX selfield-tabindex.
IF i_data-qmnum NE space.
SET PARAMETER ID 'IQM' FIELD i_data-qmnum.
CALL TRANSACTION 'IW52' AND SKIP FIRST SCREEN.
CLEAR ucomm.
ENDIF.
ENDCASE.
CLEAR ucomm.
ENDFORM. " f4300_user_command
EXPLANATION
In this program, first we created a PF status (ZSOM_STANDARD), which was an exact copy of STANDARD of program SAPLSALV through transaction SE41 (Menu Painter). Then we added another button to it,with a new fcode called CHNG. After this this we set this PF status instead of STANADRD.
We initialize a third event USER_COMMAND and associate a form with it. In this form we can capture the function codes and write any functionality under it. If we write functionality for an existing fcode, then this gets precedence over the default functionality that might be associated with it.
In this example, we capture a standard fcode &IC1 that is nothing but double clicking a line of the report. We are capturing the notification number of that line and calling transaction IW52 with it. We are also doing the same when a user clicks on the new Change Notification button.
When the user clicks the Back button in IW52, it comes back to the report.
Please reward for the same.
Message was edited by: Prakhar Saxena -
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha. -
Hi experts,
I am using radio buttons in alv report by using screen painter but error occurs in alv that screen doesn't exist in module.
plz help me.Hi Ankita,
check this program.
*& Report ZALVGRID_WITH_RADIOBUTTONS
*& This program shows how to realize radiobuttons in ALV grid lists
*& using event HOTSPOT_CLICK.
*& Screen 100:
*& - Flow logic
*& PROCESS BEFORE OUTPUT.
*& MODULE PBO.
*& PROCESS AFTER INPUT.
*& MODULE PAI.
*& - Screen elements: none
*& - ok-code field -> gd_okcode
*& GUI Status MAIN100:
*& - F3 = 'BACK', Shift+F3 = 'EXIT', F12 = 'CANC'
PROGRAM zalvgrid_with_radiobuttons.
TYPE-POOLS: abap, icon. " INCLUDE . for releases < 6.20
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE iconname.
TYPES: button2 TYPE iconname.
TYPES: button3 TYPE iconname.
TYPES: button4 TYPE iconname.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gs_layout TYPE lvc_s_layo,
gt_fcat TYPE lvc_t_fcat.
DATA:
gd_okcode TYPE ui_func,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid TYPE REF TO cl_gui_alv_grid.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
IS ASSIGNED ).
Set all radio buttons "unselected"
IS ASSIGNED ).
Set selected radio button "selected".
= icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'REFRESH'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
MAIN *
START-OF-SELECTION.
PERFORM select_data.
PERFORM init_controls.
PERFORM build_fieldcatalog.
PERFORM set_layout.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Link docking container to dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL SCREEN 100.
END-OF-SELECTION.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
Leave report
CASE gd_okcode.
WHEN 'BACK' OR
'EXIT' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
Refresh table display
WHEN 'REFRESH'.
PERFORM refresh_display.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR gd_okcode.
ENDMODULE. "PAI INPUT
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
ALV List with Radio Buttons
SAP DEVELOPER NETWORK | sdn.sap.com BUSINESS PROCESS EXPERT COMMUNITY | bpx.sap.com
© 2007 SAP AG 7
define local data
DATA:
ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'ICON'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'NAME' ).
NOTE: field ICON-NAME has data element ICONNAME.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'NAME'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-coltext = ls_fcat-fieldname.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON3'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON2'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
ls_fcat-fieldname = 'BUTTON1'.
ls_fcat-coltext = ls_fcat-fieldname.
INSERT ls_fcat INTO gt_fcat INDEX 5.
Renumbering of the columns
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button. " selected radiobutton
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
Alternatively: create icons using function module 'ICON_CREATE'
on SAP releases where these icons are not available.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
*& Form INIT_CONTROLS
text
--> p1 text
<-- p2 text
FORM init_controls .
CHECK ( go_docking IS NOT BOUND ).
ALV List with Radio Buttons
SAP DEVELOPER NETWORK | sdn.sap.com BUSINESS PROCESS EXPERT COMMUNITY | bpx.sap.com
© 2007 SAP AG 9
Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
REPID =
DYNNR =
SIDE = DOCK_AT_LEFT
EXTENSION = 50
STYLE =
LIFETIME = lifetime_default
CAPTION =
METRIC = 0
ratio = 90
NO_AUTODEF_PROGID_DYNNR =
NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Size of container = full screen size
CALL METHOD go_docking->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create ALV grid instance
CREATE OBJECT go_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = go_docking
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler for event HOTSPOT_CLICK
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR go_grid.
ENDFORM. " INIT_CONTROLS
*& Form REFRESH_DISPLAY
Refresh table display after switching the radiobuttons
--> p1 text
<-- p2 text
FORM refresh_display .
define local data
DATA:
ls_stable TYPE lvc_s_stbl.
ls_stable-row = abap_true.
ls_stable-col = abap_true.
CALL METHOD go_grid->refresh_table_display
EXPORTING
is_stable = ls_stable
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " REFRESH_DISPLAY
*& Form SET_LAYOUT
Set layout for ALV list
--> p1 text
<-- p2 text
FORM set_layout .
CLEAR: gs_layout.
gs_layout-cwidth_opt = abap_true. " optimize column width
gs_layout-zebra = abap_true.
ENDFORM. " SET_LAYOUT
Regards,
Prasanth
Reward if helpful -
How to create a radio button in ALV Reports
Hi all,
Best wishes to all..
Kindly reply me to this question... that is "How to create a radio button in ALV Report"
Thanks and Regards
AnjaliHI
here is an example :
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
IMPORTING
RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
MAIN *
PERFORM select_data.
CALL SCREEN 100.
MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
MODULE PAI INPUT *
MODULE pai INPUT.
to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD G_CUSTOM_CONTAINER->FREE.
CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
text
--> p1 text
<-- p2 text
FORM build_fieldcatalog .
define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
text
--> p1 text
<-- p2 text
FORM select_data .
define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards,
Prasanth
Reward all helpful answers -
Control User Specific button in ALV report
Hi,
Can anybody please suggest me how to control "USER SPECIFIC" button in ALV report layout using authorization object. I mean if you can tell me which authorization object is responsible to control the "USER SPECIFIC" button.additional info to what Lakshmi already said:-
normally the restrictions for saving layouts/display variants are done at 2 levels:
1) The developer of an ALV list first predetermines the authorization in the 'i_save' parameter within the code.
I_SAVE = ' ' -
layouts cannot be saved
I_SAVE = 'A' -
user-specific and cross-user layouts can be saved
I_SAVE = 'X' --- cross-user layouts can be saved
I_SAVE = 'U' --- user-specific layouts can be saved
2) The second level comes to us restriciting the S_ALV_LAYO which gives access to users to save global layouts if I_SAVE for that particular transaction is A or X.
for example, a report has I_SAVE= 'A', which means
it will allow to save User-specific layouts without any restrictions.
and if user has S_ALV_LAYO then he can save both User-Specific and Global Layouts(variants).
it would be better to keep this object separate. -
Information button in ALV report
Information button in ALV report is not working. any suggestion
I have copied standard tool bar from standard program.During debugging, I have found that function code is defferent. Then I changed function code according to that.
-
How to give push button in alv report output
hi,
my requirement is that , i have to give push button in alv report output(item level) not in application toolbar, i am using reuse_alv_grid_display FM, can any body provide me sample code
regards,
siva kumarhave a look at this thread, also has a sample report at the end from Uwe Schieferstein.
[button on alv list|How to add and program a pushbutton on ALV grid line;
seems not to work try this:
How to add and program a pushbutton on ALV grid line
Edited by: Micky Oestreich on May 15, 2008 10:20 PM -
How can we place a push button in ALV report
hi
could anybody inform me
how can we place a push button in ALV report
thanx
regards
kals.Hi kals.
please have a look at demoprogram
SALV_DEMO_TABLE_FUNCTIONS
BCALV_GRID_05
Regards
Bernd -
What is the constant name for Change layout Button in ALV Grid ABAP Objects
Dear All,
I have one query please help me.
what is the constant name for Change layout Button in ALV Grid ABAP Objects.
With Rgds,
BabuHalo Vinod,
The consant name is cl_gui_alv_grid=>mc_fc_current_variant.
Regards
Arshad -
How to get GUI Status(Push Buttons) in ALV Report
Hi Friends
I have a requirement in a way that:
Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
Can anyone throw some light how we can achieve this.
Thanks for your cooperation!
Regards,
Madisettydata: rt_extab type slis_t_extab,
g_ucomm like sy-ucomm ,
g_selfield type slis_selfield.
form alv_display .
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMM'
it_fieldcat = it_fldcat
tables
t_outtab = it_final1
perform pf_status using rt_extab.
perform user_comm using g_ucomm g_selfield .
endform.
form pf_status using p_rt_extab.
set pf-status 'PF_STATUS' excluding p_rt_extab.
endform.
form user_comm using p_ucomm like sy-ucomm
p_selfield type slis_selfield.
data: l_row type i.
case p_ucomm.
when 'DISPLAY_PO'.
loop at it_final1 into wa_final1.
if wa_final1-sel eq 'X' .
l_row = l_row + 1.
endif.
if l_row gt 1.
message e004.
endif.
clear wa_final1.
endloop.
p_selfield-fieldname = 'SEL'.
read table it_final1 into wa_final1 index p_selfield-tabindex .
set parameter id 'BES' field wa_final1-ebeln.
call transaction 'ME23N'.
endcase.
endform.
*create user interface for gui status by double clicking on 'PF_STATUS'.
*Check the above sample code . -
Custom button on ALV report for Tcode FL10G ?
Hi All,
I want to add custom button in the AVL report for FL10G transaction. And then need to implement logic for that button (calling BAPI to create shipment for the selected records).
For VL10G alv program GUI Status - STANDARD001 I think I can add button in this gui by using access key.
But how to implement logic for this custom button? Where I can put the code for this button logic?
Please let me know if any one has any ideas on this issue.
I appreciate your help and time on this.
Thanks.
MHi Murali,
The standard program it will not allow to copy the GUI Status. Because source and target program should not same.
It will definitely debug will work. Yo can create the GUI Status through SE41. In SE41 Just give Program name :SAPLV50R_VIEW click the button status. here you should not give any gui status. just blindy say create the then it will popup screen appears in the screen. Here you can mention your Z GUI Status. It is not required to create all the menus manually instead of the there is button which is located in the screen next to blue i button. here you can click and select the standard interface. You can get all the menus as similar to standard. Like that you should create Menu Bar, Application Toolbar and Function Keys Menus. Then you can add your custom button in the Application tool bar button.
When you execute the Transaction VL10G and check your cusom menu button will appears. Once you click custom button only exit will trigger. Find the below code for your reference.
CODE
loop at ct_postab assigning <fs>
where selkz = 'X'.
*To Fill the BAPI Header Parameters
str_ordhdr-ship_cond = w_sval-value.
*To Fill the BAPI HeaderX Parameters
str_ordhdrx-updateflag = 'U'.
str_ordhdrx-ship_cond = 'X'.
call function 'BAPI_SALESORDER_CHANGE'
exporting
salesdocument = <fs>-vbelv
order_header_in = str_ordhdr
order_header_inx = str_ordhdrx
tables
return = str_return.
endloop.
read table str_return into w_return index 1.
if sy-subrc eq 0.
if not w_return-type = 'S'.
message w_return-message type 'E'.
leave to current transaction.
endif.
endif.
*Do the BAPI Commit
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
endif.
endif.
endif.
Let me know if you have anything to discuss on the same. -
Hide Change Layout Button in ALV report o/p for MB52 Tcode
Hi,
Is it possible to Hide Change Layout Button in ALV output for Report MB52 using authoriztaion.
We have created a layout in which we are hiding some coloumns which the user should not see.
But if the change layout button is active then the user can add those coloumns to output.
Is this possible through authorizations. I want to avoid doing any chnages to the std sap program.
Thanks & Regards,
FawazCheck the object S_ALV_LAYO
Maybe you are looking for
-
How can I change the order (top to bottom) of toolbars
I've just upgraded to FX31. I have Classic Theme Restorer installed, and nothing too drastic has occurred. However, the order (top to bottom) of my Add-on toolbars has changed. How can I correct this ? I have tried disabling and restoring them, both
-
Headphone jack no longer working - How to test if it is a hardware or software issue?
Hi, my headphone jack fairly suddenly stopped working. The speakers and the sound are fine, but when I plug my headphones in nothing plays. I see that the computer does recognize that headphones are plugged in, and it does change it to "headphones" i
-
Back button is not working-urgent
hi , i created my own pf status by using following function modue. it is showing pf status correct. in my pf status i keep back and exit buttons only. when i execute the following report it is showing back and exit buttons only. when i click back but
-
Hi Friends, This is my first message in this group. Now i am in developing the XI interface between SAP R/3 & File System. This is regarding the transfer of Vendor master data from SAP R/3 to a file system as xml file. The requirement is: I need to f
-
Windows xp local printers offline
Hi, We are currently in a queue-based-printing environment and are rolling out Windows XPSP2 to our users. The problem we are having is that when we add a local printer and configure that printer's port to use the Novell Print queue, the local printe