Cofiguring the PI 7.0 to ECC6.0

Hi Experts,
I have installed ECC 6.0. I have added PI 7.0 (XI) component also. i have done postinstallation steps of SLD using the NW7 installation Guide MAXDB and functional testing was done everything is successfull now i need to configure the PI 7.0 to other system ECC 6.0 . please forward those steps which are required to build for (exhange the information) from PI 7.0system to other system
Thanks in advance,
Siva.

Hi Bhavesh,
when i starting the j2ee server the error is comming but the visual administrator is working
i found the error
#1.5#C000AC1F643C0000000001F1005E13AD0004398D9AD41970#1189180257606#com.sapmarkets.bam.jmxadapter.PatternValueDefinition##com.sapmarkets.bam.jmxadapter.PatternValueDefinition#######Thread[main,5,main]##0#0#Warning#1#/System/Server#Plain###Class com.sap.bc.proj.jst.JStartupFramework not found. Plase make sure jStartUp.jar is available.#
HOME:C:\j2sdk1.4.2_13
3) THE LOCAL GATEWAY IS NOT CONNECTED
please guide me the how to resolve this issue
Thanks&Regards,
Naidu
Message was edited by:
siva naidu

Similar Messages

How to cofigure the JDBC Sender adaptor

how to cofigure the JDBC Sender adaptor,
i want to do the scenario JDBC>XI>SAP
Thanks & Regards,
priya reddy

HI
Database (JDBC) Adapter
The JDBC Adapter allows access to any DB that allows a JDBC driver to access the DB. This driver is not supplied with the adapter but must come from the DB provider or a 3rd party. The adapter converts database content to XML and vice versa.
Database content can be read with any SQL statement using a special XML format. This format enables SQL INSERT, UPDATE, SELECT, DELETE or even stored procedures. A message is always processed in one database transaction.
Refer the following links for further assistance
JDBC ADAPTER:
http://help.sap.com/saphelp_nw2004s/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm
Use thes step by step guidese
https://wiki.sdn.sap.com/wiki/display/XI/JDBCTOJDBC
https://wiki.sdn.sap.com/wiki/display/XI/XMLFile2XMLFile
tutorial /people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/frameset.htm for sender side JDBC configuration.
Follow this link
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
cheers
reward points if found useful

TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

Hello,
I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
Any informations about the customizing for a proof of concept would be appreciated.
All the back-end (R/3) as allready been customized.
Thanks for your responses.
Olivier

Hello,
If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
They also run stand alone, so you can test it as well without configuring the portal.
See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
Regards and Groetjes,
Maurice

The bpp from R3 to Ecc6, what is it like?

the bpp from R3 to Ecc6, what is it like? and generally, how many times for R3 Server's installation ?
what is it like？

Hi,
It depends upon your system landscape. If you have 3 system landscape then there would be 3 upgrade in the project. DEV,QAS & PRD.
Regards

From where can i download the free trail version of ECC6.0EHP5 ? i

Hi, I am a student of SAP FICO. How can i do practice in my home. is there any free trail version ?
please let me suggest. also suggest me the sample questions for fico certification..
Regards..
Partha banik.
Mail me : [email protected]
contact : 7278016630

You can't. it doesn't exist.

How to install and cofigure the Tomcat server in Windows 98

In my system i am having Win 98. I install tomcat in that but while runing it shows error to set CATALINA_HOME and JAVA_HOME i tried that in autoexec.bat but its not working so can any one solve this problem

tell me if you know

ECC6.0 t-code COOIS - how to get the "Profile" select-option list

Hi PP Gurus
We are implementing ECC6.0
We upgraded one of the systems from 4.7 to ECC6.0 (and also kept data: documents, users profiles, variants,u2026etc).
My question is regarding standard transaction COOIS.
I do comparison in current 4.7 and ECC6.0 systems (I have SAP_ALL and SAP_NEW in both systems).
The thing is that in our ECC6.0 system the transaction COOIS doesnu2019t display Profile on select-options screen.
There are only the following items (select-option screen of COOIS in ECC6.0):
-LIST
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
In the current Enterprise 4.7 system the transaction COOIS displays the following select-option screen:
-LIST
-PROFILE
-LAYOUT
-Prod.orders checkbox
-Planned orders checkbox
u2026And u2018Selectionu2019 tab with other fields
Questions:
1.     Is that possible to maintain / see and select a PROFILE in COOIS of ECC6 (or due to new functionality it no more available on that screen ?) How to do that?
2.     Looking at layouts (I ran COOIS in two systems and compared the results) I canu2019s see in ECC6.0 some icons like u2018Refreshu2019, u2018Order logu2019, u2018Display order componentsu2019, u2018Long textu2019 , u2026.) But all of them are in 4.7 layout. How to get them in ECC6.0 ?
What I have already explored:
u2022     ECC6.0 has a new config. t-code COISN (4.7 has only COIS) . I created my new overall profile there, set my own layout, but running COOIS still canu2019t see/use the PROFILE;
u2022     I have compared the standard structure PPIO_ENTRY_SC1100 in 4.7 and ECC6.0 and found the new component COIS_LISTTYP in ECC6.0. In this situation I ran a new t-code u201CDefine New List Typesu201D (it doesnu2019t exist in 4.7) and created my new entry, but still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I also tried situation when both config. transaction COIS (in 4.7 and ECC6.0) had the SAME overall profiles u2013 still canu2019t see PROFILE on select-option screen of COOIS in ECC6.0;
u2022     I found a new icon u201CNavigation profileu201D in result layout of COOIS ECC6.0 Is that right place where I can maintain the icons I need (see my second question) ?
THANK YOU.

Hi,
The reports are modified if am right as of ECC 5.0. Refer to note - 747469 which gives a list of all reports modified.
If am right by profile you mean navigation profile, this is now in the display screen. The content remains, only thing is the layout is modified & more structured. So i would suggest you to have a look around in COOIS report & you will find the info.
The navigation profile is adjacent to the icon called Environment (its a drop down list).
Revert if you face any issues.
Regards,
Vivek

Maintain BSR Code for the TDS Print in ECC6.0

Dear all,
Where can i maintain the BSR code .We are @ ECC6.0.
Please help.

Hai
At the time of creation of House banks create bank keys(in Tcode:FI12) with BSR Code that will get prinetd in TDS Certficate.
Regards
Raghavendra.M
SAP-Practice

How do I update all the records in a table from the contents of another table?

Ok some situation information, I have a pervasive database that runs our accounting software that I am pulling a product list from. I have that list stored in a table in SQL. From time to time we update the records in the pervasive database and
I want to be able to pull those changes into the SQL table. I don't want to drop the table and recreate it because if a product is no longer active in the pervasive database it will not be returned by the query (if I return all the products even the
inactive ones I will get thousands of records rather than just a few hundred) and I do not want to loose the products from the table that are now inactive.
So what I want to be able to do is pull the list from pervasive, compare it to the list that exists in SQL and update any changed records, add any new records, and leave any now missing records alone(missing from the pervasive list but present in the SQL
list). I have no trouble pulling the records from pervasive (now) but I am a little stumped on how to do the rest. I am not sure if this is a situation to use MERGE or not. I also do not really need this to be done on a regular basis as the
changes do not happen often enough for that, the ability to manually trigger it would be enough.
Any help would be appreciated.
David

Hi David,
lets say you want to go with the lookup transformation.
lets say u want to move the data from server A table A1 to Server B table B1
What you need to do is the following:
Cofigure the Lookup options as follows:
- In general -> Specify how to handle rows with no macthing entries -> "Redirect Rows to no Match Output"
- In Connection -> Set the ole db connection to the Server B and select the table B you want to lookup the values in your case the table where you want to input the changes
- In columns -> link the product column from table A to product column in table B. And do not select any rows to output.
- now your component is ready next you need to input. so when u connect your lookup to the destination component You will get an option to select which output you want to use - use "Lookup No Match Output".
this will actually just allow you to add only new items only to the table B.
Teddy Bejjani - BI Specialist @ Netways

Error while adding new field in the Segment type thru WE31.

Hi All,
I want to add one field in the Z segment type using WE31.But i am getting the error message as
'Current segment definition <segment name> can no longer be changed and The current segment definition
is already released.You can either add a new segment definition or cancel the release of the current segment definition'.
The current segment defenition which i am trying to change got the SAP release of 45B. But the system has upgraded to Ecc6 recently.
I tried going to the edit menu and cancel the release, but still it is not allowing.
Whats the impact of the Add button(Add version) and creating a new version?.will it create a new version for ECC6?.
Points will be rewarded
regards,
neslin.

Hi
You can create a new version. This will not create any problems. You might not be able to cancel the release because of upgrade.
Thanks
Vijay

How can I use REQ1 and REQ2 at the same time to send two different groups of data to two blocks of buffers?

I want to use REQ1 to send data1(16bits) in th rate of 10MHZ to buffer1 and REQ2 to send data2(16bits) in the rate of 1KHz to buffer2. The first part(sending data1) has been done(using the attached file).How to re-cofigure the ports to send data2 to buffer2?
Attachments:
DIsingleBufExtTrig653x.C ‏6 KB

Greetings,
Essentially, this is a matter of duplicating this code for use with the second group. However, be certain to change the group parameter to 2 for the function calls being used with the second group.
Good luck with your application.
Spencer S.

Upgrade 4.6C to ECC6.0 IT0000 can't be overviewed, can only be displayed..

dear all,
we are currently in the process of upgrade from 4.6C to ECC6.0
and we found this minor issue in the submodule PA:
using tcode pa20/pa30 we can not see any record of IT0000 Actions using 'overview'
but the all the detail actions can be displayed..
this is only happen in IT0000
other infotypes can be overviewed and can be displayed as normal.
anyone ever gone through the same issue?
we have updated patch for SAP HR : SP 32 and EA 7.
the authorization is SAP ALL.
looking forward to hearing from you.
best regards,
dhenny muliawaty (pei pei)

dear JLJ
we're still on the upgrade process. i can only share with you our current condition and the lesson learnt.
we have copy production, upgraded from 4.6C to ECC6.0
and we did not face authorization issue or any other main issues in HR cause we have not yet implemented the submodules e-recruitment/ESS/other sub modules that are being enhanced in ECC6.0
our technical team did the oracle database upgrade + 4.6C upgrade to ECC6.0 right away directly after the oracle database upgrade. TST production is considered ok. we only have some minor configurations to be done.
next when our tech team upgrade the oracle database to ver. 10 in R/3 4.6C production system, and there's a time lag (interval) where our 4.6C production system not directly upgraded to ECC6.0 after the oracle database upgrade done.
and current condition - production database oracle upgraded, the R/3 4.6C Prod has not yet being upgrade to ECC6.0,
R/3 4.6C production face the authorization issue (not HR module, but other modules)
we need to check and apply sap notes/release to solve some errors in 4.6C production system and related modules settle the authorization issue. current progress is still on the technical abap preparation and functional testing.
it's been scheduled the next step - tech team will upgrade the production system from to ECC6.0 within next week. we hope all will be ok.
from this experience, my suggestion is that you need to make sure basis team have implemented sap support packages module related/ enhancement packages- latest updated one in your 4.6C system, then you also needs to check sap release notes implemented related with your module.
would you share the steps have been done in upgrading your production system in detail?
thanks and best regards,
dhenny muliawaty (pei pei)

In UPGRADE from 4.7c to ecc6.0 ME21N Transaction PO doesn't print

Hello Guru's,
Will anyone give answer while upgrading(4.7C to ECC 6.0) in ME21N transction PO doesn't printing. will you provide which OSS will support to rectify the problem.
Full points for the answer.
Regards, PV

Hi,
Can you clear whether you are in the process of upgrading to ECC6 or you have already completed the Upgrade to ECC6 ?
Regards
Suhas

Upgrade from 4.7C to ECC6.0 fields missing in t code FBL5N

Few fields are missing while upgrading from 4.7C to ecc6.0 in SAP STD Transaction FBL5N. Will pl clarify me.

Hi,
Can you clear whether you are in the process of upgrading to ECC6 or you have already completed the Upgrade to ECC6 ?
Regards
Suhas

How to Change Source system type of ECC6.0 in BW system

Hi BW Experter,
   I connected ECC6.0 PRD system with BI7.0 PRD system , the connection is successful,
but the source system type of ECC6.0 PRD is not collect . The ECC6.0 PRD is as a
BW system type in the source system list of bw system .
   I found that Tcode RSA1 has ever been run in PRD ECC6.0 , So I did a connection testing of
ECC6.0 QA with BI7.0 PRD .
     Step 1. Connect ECC6.0 QA with BI7.0 PRD , ECC6.0 QA was as SAP system type in source system list of bw system .
     Step 2. Run tcode RSA1 in QA ECC6.0
     Step 3. Delete connection of ECC6.0 QA with BI7.0 PRD .
     Step 4. Connect ECC6.0 QA with BI7.0 PRD again , ECC6.0 QA was as SAP system type in source system list of bw system .
   I want to know how to change ECC6.0 PRD source system type to SAP .
If it can't been change to SAP ,Is there any impact when ECC6.0 PRD is as bw system type in source system .
Thank you for your help .

I got the soulution from note: 1087980 - ECC Source systems appearing in BI folder
Summary
Symptom
Source system connection for an ECC system appears in the BI folder, rather than in SAP folder, as expected.
Other terms
Wrong folder,RSA1, RSBASIDOC, RSAP_BIW_DISCONNECT
Reason and Prerequisites
Transaction RSA1 was inadvertently used on an ECC system , thereby creating a 'Myself' source system entry in RSBASIDOC table
Solution
This is just a display issue and does not cause any operational issues. Therefore, it need not be corrected, especially if the ECC system in question is used as a BI system as well.
If it is absolutely required that the ECC source system appear in the correct folder, perform the following steps.
1. Check that an entry with SRCTYPE 'M' exists in table RSBASIDOC table of ECC source system.
2. Note the values for SLOGSYS and RLOGSYS. It should be same.
3. Run the function module RSAP_BIW_DISCONNECT in the ECC system.
   NOTE: Never run that function module in a BI system!
4. Enter the following values :
I_BIW_LOGSYS   <RLOGSYS> as noted in step 2
I_OLTP_LOGSYS <SLOGSYS> as noted in step 2
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
5. Go to RSA1-> Source systems in the BI system connected to the ECC system.
6. Select the ECC source system and select RESTORE in the right click menu.
Now the ECC system should appear in the SAP folder.
If running RSAP_BIW_DISCONNECT results in an error like OTHER_ERROR, please check if a valid RFC connection exists in transaction sm59.
If the myself source system connection cannot be deleted in any case, log a service marketplace message with SAP Support.
Edited by: fang frank on Jul 15, 2009 8:31 AM

Cofiguring the PI 7.0 to ECC6.0

Similar Messages

Maybe you are looking for