COGI - "Error Description" issue

Hi all,
In COGI report we are facing following problem.
In the COGI report, in the Qty column's amount system shown 17,098.906(Decimal format)
(AFFW-ERFMG = 17,098.906)
But in the u201CError messageu201D column system is showing as below.
u201CBA Unrestricted-use 17.098,906 KG : 117137 112 1211 DE01519u201D (Different decimal format)
     (AFFW-MSGV1 = BA Unrestricted-use
      AFFW-MSGV2 = 17.098,906
      AFFW-MSGV3 = KG
      AFFW-MSGV4 = : 117137 112 1211 DE01519)
Now user wants u201CWhy in Error message system is not picking decimal format like quantity field i.e. 17,098.906.
It seems that while confirmations of production order u201CUser profileu201D setting is 17.098,906, thatu2019s why system put the same format (17.098,906) in the message.
Is there any way, to change the message format like quantity field or vice a versa?
Thanks in advance.

Hi,
System is showing the decimal point in the Error message also. I only difference is in COGI it is in a different format i.e Comma is shown after the 17 (thousands place) and Decimal is shown after 98 (units place), where as in the Error Message it is vice- versa i.e. Decimal after the Thousands Place and Comma after the Units place.
The above difference is because of the User OWN setting in Tcode : SU01 / SU3.
Goto Tcode : SU01 / SU3 and select the Second Radio Button for the Decimal Notation in Defaults Tab screen. USe the same Radio Button for both the USers then you will be able to see the decimal in both the cases i.e COGI and Error Message.
Hope this will help you.
regards
radhak mk

Similar Messages

In COGI error text "Multiple assignment of line item"

Hi Guru,
In COGI error text "Multiple assignment of line item"
Description:
ultiple assignment of a line ID
   Message no. M7357
iagnosis
   An item table, in which the line ID (LINE_ID)
   was transferred to the function module MB_CRE
ystem Response
   Processing is terminated.
rocedure
   Contact the system administration.
rocedure for System Administration
   There is an error in the calling application.
Please help me to resolved this issue.
Thanks and regards
PNU

Hi,
Thanks for reply,
It is possible to remove material from COGI list. We need to stop creation of this error.
Is there other solution to control creation of error "Multiple assignment of line item"
Thanx & regd.
PNU

COGI error generated while collective order confirmation

hi ALL, this is the real task for all PP GURUS.
the issue is related with collective order confirmation.
client is using customised program ZPP_CONF to confirm the collective order which is based on the sap spro program CORUPROC.this include automatic goods receipt,backflush & actual cost update .as user use zpp_conf for confirmation all this actions happened in backgruond.
now after using ZPP_CONF . the confirmation is not happening .instead of that it is going in COGI where they are getting a error massage which is as follows
"You have no authorization for this transaction with movement type 101u201D
this error continues for 10-15 minutes after doing refresh it goes. & confirmation happens.
this is not happening for all orders but for 8 out of 10.
users have proper authorisations.
they have enough stocks in st. locn.
they are loosing lot of time becuse of this.
HOW CAN I RECTIFY THIS ERROR GURUS?
when i search i found this is written in the CORUPROC documentation
Incl. incorrect goods movement: Not only preselected but also incorrect goods movements that are usually processed with transaction COGI are selected and processed.
VENKADESH

Hi,
The Program CORUPROC only can adjust the Errors in Goods movements. It can not handle the Table Locks..
The Program CORUAFWP, can taek care of table locks also, apart from the Errors in Goods Movements.
Refer below thread for similar type of problem..
COGI errors
Hope this helps..
Regards,
Siva

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

HTTP Adapter error description not showing in alert

I have created a alert thru alertcatdef & created a rule in administartion, when we have a issue with http adapter, I get the alert as follows
Subject: HTTP Adapter Error
Importance: High
Alert ID: ##06488##
HTTP Adapter Error - Possible Tracs Interface issues
Please Review details here below:
Time: 10/23/2008 - 13:56:58 - DPI -HP-UX DPI 700
Messages_ID:
Rulename:
Error Category:
Error Code:
Sender Info:
Service:   Interface: Namespace:
Receiver Info:
Service: Interface:   Namespace:
Adapter Type:
Adapter Error:
there is no error description when this alert generated, is there anything I missing on the alert, can some throw some suggestions
thanks
ramesh nallapu

In the slg1, I see
Alert was generated in logical system DPICLNT010
Alert is generated on the Central Alert Server
Alert category: HTTP_ADAPTER
Expiry time: 20081024 135658
Recipient from alert category: XIDEV
Recipient from alert category: XISUPPORT
Delivery by e-mail to XIDEV
Delivery by e-mail to XISUPPORT
External ID of alert: 06488
Delivery                                                 1 completed
Alert created. ID: 49008E897C8C5D01E1000000C085E11E
thanks

An error occurred in the requested FTP operation. Detailed error description: The password was not allowed

Hi All,
We are using FTP Connection in our SSIS Package which will take a flat file from the sharepath to another FTP Path.
We used SqlServerTableConfiguration to store all the connection. Initally we have stored only the below connection int he
SqlConfiguration table. ie only the server name
Note : We are not using XML Configuration.
ConfigurationFilter
   ConfiguredValue
PackagePath
Filter_ftp
pqrft- pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
while running the job we have found that we have not stored the UserName and password so we have added the below entries in the Sql Configuration table
In the Configurationtable we have the following entires
ConfigurationFilter
ConfiguredValue
PackagePath
Filter_ftp
pgrotmlceni
\Package.Connections[FTP Connection Manager].Properties[ServerUserName]
Filter_ftp
21
\Package.Connections[FTP Connection Manager].Properties[ServerPort]
Filter_ftp
abcdXYZ
\Package.Connections[FTP Connection Manager].Properties[ServerPassword]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com
\Package.Connections[FTP Connection Manager].Properties[ServerName]
Filter_ftp
pqrft-pcmnt.uk.acenentcapmc.com:21
\Package.Connections[FTP Connection Manager].Properties[ConnectionString]
In the package properties we have selected "DontSaveSentivity" Option.
We are getting the below error message when we run the package through jobs after deployment and also we are getting the same error message even when we run the package from Bids
Message
Executed as user:abc_xyz-proxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 06:53:16 Error: 2013-12-16 06:53:20.69
Code: 0xC001602A     Source: SSIS_ABC_GT_GRoots_Export Connection manager "FTP Connection Manager"     Description: An error occurred in the requested FTP operation. Detailed error description: The password
was not allowed . End Error Error: 2013-12-16 06:53:20.71     Code: 0xC002918F     Source: FTP Task FTP Task     Description: Unable to connect to FTP server using "FTP Connection
Manager". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 06:53:16 Finished: 06:53:20 Elapsed: 3.822 seconds. The package execution failed. The step failed.
ilikemicrosoft

Hi Surendiran,
The issue should occur because the syntax of the ConnetionString property of the FTP Connection Manager is incorrect. In fact, the ConnectionString property is unnecessary. I suggest that you only use the four properties instead: ServerName, ServerPort,
ServerUserName, and ServerPassword.
Reference:
http://stackoverflow.com/questions/3888170/ftp-connection-string-using-expression-in-ssis
Regards,
Mike Yin
If you have any feedback on our support, please click here
Mike Yin
TechNet Community Support

Error 80043ac1 - An external object raised an error. No Error Description

Hello,
After installing Crystal Reports runtime XI R2, I've been having the error:
Crystal Reports ActiveX Designer error 80043ac1 -
An external object raised an error. No Error Description.
This same runtime package have already been successfully installed in other server (Windows 2003 as well).
I have already tried to give permission to IUSR user (full control) in Windows temp folder.
Does anybody have any information on this issue?
Thanks in advance,
Bruno

Thank a lot for replying Don.
I have tried to use Process Monitor, and found out that I had to give permission for IUSR to the root drive.
I gave some permissions, and the error message changed:
"Create object failed
An error occured while creating "oCrystal". error '8007007e'"
oCrystal is an application variable that I created in global.asa it contains:
<object runat="server" scope="application" id="oCrystal" progid="CrystalRuntime.Application.11"></object>
I run Process Manager again, and found another process with "access denied" for user IWAM, so I gave again permissions for it and finally worked.
Thanks!
Edited by: BrunoDuraes on Sep 2, 2009 4:56 PM

Cogi Errors due to Material Substitution

Hello,
In plant 0162 we have cogi errors that I can not explain. It is related to material substition and BOM changes.the COGI error comes from the component material 10085940 in order 100239889. this material 10085940 was set for material substitution for material 10007152 on September 7, 2008 effective when i refer to BOM but the production order was created this august.why do we have this COGI error? we have 10007152 in house and none of the 10085940 material please answer and explain why this happen?
More thanks,
Ryan

Hi,
Where could i see this percentage for this in BOM? i have noticed in the production order compenet overview of my material the two material was there already both backflushing indicator was check, discontinuation column was populated on both material = 1 (simple discontinuation - maintain in master record). could this be a factor? why does my production order pick both this two material in its BOM 10085940 will be effective on 07.09.2008 this is weird and problematic to us.
Please advice what happen and fixed this one my cogi error said enter storage location for this 10085940 component.
and in CS03 when i look at the BOM:
10074921 (valid fr) 14.05.2008 (valid to) 07.09.2008 (change # 500001258 (change # to) 500001311
10085940 (valid fr) 07.09.2008 (valid to) 31.12.9999 (change # 500001311 (change # to ) blank
Please any help with this one for me to resolve this issue expert. please
Thanks
Ryan
Edited by: Ryan Lazaro on Aug 22, 2008 10:22 AM
Edited by: Ryan Lazaro on Aug 26, 2008 4:30 AM

COGI-Error and Impact

It seems SDN is a very good Forum to Discuss .
I have an Issue , it is not a issue actaully But may be knowing about the system about one Transaction.
What is the impact of Transaction COGI error log ? As it shows , error in Storage location, Plant, Period is not open like these.Please explain.
-Thx,
John

In an example of an error in the Goods issue. the Material was set up to issue from SLOC 1000 and it was in 1010. Physically you issue the material from 1010 and there is an entry in COGI showing no material in 1000.
1 - the system will show inventory still in SLOC 1010
       Inventory account is overstated
      At time of physical inventory there will be a Loss of inventory reported
      When MRP runs, it will not plan for the inventory used, since the system sees it in 1010. Depending on the part and quantity involved, assembly lines could go down.
Depending on the part and quantity involved, inventory calculation turns could be affected
     If the failed Goods movement is corrected after inventory - the loss of inventory will be incorrectly offset by consumption. And then inventory will be incorrect again.
2 - Order settlement
      in Make to stock scenario, with released standard cost, a favorable mfg variance will (incorrectly) be posted, indicating that the cost to manufacture the assembly was less than planned for.
      in Make to order, where actual production costs are transferred to the sales order the actual costs will be low, the COS will be low and the Margin will be high.
that is some of the effect.
Our cost accountants do a review of COGI the last day of each month and require that corrections be made.

COGI errors - Enter Storage location

Hi Experts,
I have problem with my component materials in COGI txn..error is "Enter Storage location".
Step by step process:
But component material has storage location 1000 in material master. What might be the problem.
I do goods issue or 261 movement in COR6 or confirmation of process order.
Hope you could help me.
Thanks a lot

Hi,
System will check the str location in BOM.
If it is not found it will use str location determination strategy:
Strategy 1: System will check in component material master. If it is not found,
Strategy 2: System will check in production version.Issue str location & Receive str location If it is not found,
Strategy 3: System will check as per strategy 1 after that strategy 2.
Strategy 4: System will check as per strategy 2 after that strategy 1.
Try to maintain str location explained above. COGI error will not come.
Regards,
Dharma

Can not read back error description in VB

I am using: flex_get_error_description Lib "FlexMotion32.dll" (ByVal descriptionType%, ByVal errorCode&, ByVal commandID%, ByVal resourceID%, charArray%, sizeOfArray&) As Long. The definition for "charArray" is short, while VB does not provide such type. (In your old version, it is string type.). As such, how could I retrieve the error description?

This issue will be fixed in the next release of the NI-Motion driver. In the meantime, you basically need to change charArray% to ByVal charArray As String. Therefore, the correct prototype is as follows:
flex_get_error_description Lib "FlexMotion32.dll" (ByVal descriptionType%, ByVal errorCode&, ByVal commandID%, ByVal resourceID%, ByVal charArray As String, sizeOfArray&) As Long
I hope this helps!
Best regards,
Dawna P.
Applications Engineer
National Instruments

COGI Error - RE Reserved quant. exceeded

Hi All,
First of All "Wish You A Happy New Year"
I got a issue with high priority in COGI transaction with Error Text " RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
Application Area M7 & Message Number 362.
The material is a raw material. I have verified the production order and found, the Requirement Qty for this raw material is 144,275.00, Committed quantity is 29,941.876 & the Withdrawl Qty is 147,667.284
I am new to this error issue in COGI. Can any one guide me what to do now and how to solve this issue quickly?
Thanks & Regards,
Phani Kumar

" RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
since the material is activated as a Backflush, when the try to post extra qty compare to requirement qty for that reason, Goods movement is failed and log is created in COGi.
IF they client want the above qty issue against Planned consumption.
then they need to increase the requirement qty in CO02 by 4071.456, so that the reservation qty will equal as posting
IF they client want the above qty issue against unplanned consumption.
Then They can delete the COGI error and post the Goods issue in MB1A, with out entering order in initial screen and the add the order in MB1A and post the raw material

COGI errors regarding work orders

HI Gurus,
can anybody please help me with this issue. There are COGI errors occurring for HIBE items that are put on the work order. The error message in COGI is you do not have authorization for this transaction with movement type 261. It is not happening for all the technicians and not for all the HIBE materials. It happened during a week time frame and now they do not seem to go away. Why are these COGI errors occurring and what needs to be done to fix them now. PLease advise. Help is greatly appreciated
Thanks
Anusha

Hi,
It is possibly the plant that determines if the user is allowed to post the goods movement or not. Relevant authorization object is M_MSEG_WWA, this is checked for the activity '01' and the plant. If that is not the issue then check the authorizations M_MSEG_BWA, M_MSEG_BWE, M_MSEG_BWF, M_MSEG_WWE, M_MSEG_WWF.
-Paul

Change Qty to 0 to clear COGI errors

Hello everyone,
I've been giving a temp job as a sort of MRP Controller for a materials handling company in the UK and have been given the task to clear the COGI errors. I'm new to this part of SAP as I used to work as an operator so never used any logistic or sales modules. Basically I think I have worked out what a COGI is and in princible about how to clear them. The orders have finshed and it is trying to backflush the material stock levels. The problem I am encoutering is this materials were used in orders early last year. The product has been made and shipped off to the vendor. I can see the stock being removed from the system months later in a stock check. The original backflush never happened as a lot or Materials never had the corect storage location. Anyhow, Can I clear these COGI's and the relevenant OrdRes on the materials by changing the COGI qty to 0 and then processing them? When I check the component list for the production order they go through as finialised (FLS is ticked), the OrdRes is removed however will this cause problems I'm unware of? I need to know if doing this right otherwise I need to get people to add the stock back in to clear the backlog and I have many to do and the process is painful and I want to sort this ASAP as the system is raising purshase requitions for parts need nearly a year ago and been built and sent off site!
Any help would be great...
Adam

Hi,
To do this you have to do following steps,
1. In the COGI list go to Edit - > Replace -> Date.(CtrlShiftF10)
2. Change the date to current date. This is required because the old posting periods will not be open for postings.
3. Select the line & click on Change details (F5).
4. Change the quantity to 0 (Zero).
5. Post the document.
Thanks,
Navin

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1. I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem. Strangely enough PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

COGI - "Error Description" issue

Similar Messages

Maybe you are looking for