COGI Error-Sales Order Stock does not exist

there are many item numbers that appearing in COGI for the "Movement Type" "261." and error text as "Sales order stock 330000172 000010 does not exist".
what might be the problem?
how can i fix this?
could anyone help plz

hi
as your scenario is MTO , when you run MRP for sale order all the componnets under finished product will get DEP req against the sale order,
so at the time of goods issue system check the stock for a component agaisnt the sale order. even the stock is vaible in unrestricted.
1.check for the component when you run MRP system might generated Purchase req(in case external procurment) or planned order(in case both procuremtn) you need to procure ord produce , so when you do GR for them stock will be against the sale order.
or
2.you can bring sale order stock by doing MB1B - using movement type 411 E.(transfering stock Unresticte stock to sale order stock)
-ashok

Similar Messages

Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

Sales order stock does not exists

Dear All:
I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

Hi,
Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
Regards,
Saju.s

Sales order stock does not exist

Hi All,
In MTS scenario also while doeing PGI against a sales order/delivery the system is giving error prompt "sales order stock does not exist"
What could be the reason? Pls suggest
rgds

hi
goto MB1b here issue the raw material against the sales order no
now do the PGI
regards
KI

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

Problem with PGI - Sales Order stock does not exist

Hi
I created order 58161 with 1 item line (10).
Did a delivery and created a Picking Request (which i released via transaction VL08).
When i try to do PGI i get following message:
Sales order stock 58161 000010 does not exist.
I have previously done a similar order with same material and so on and it went through the system without a hitch.
I have checked the other threads, is this where i have to use MB1B and mov.type 412 E to move unrestricted goods to sales order stock?
Thx
RM

Hi,
first u check stock at tcode:MMBE for ur material ,plant and storage location.If u dont have stock than create stock through goods receipt:mb1c.[movement type 501 e,enter ur sales order no.,item no.],I think it will solve than

Purchase Order 4500000 does not exist

When I am creating Service PO from shipment I am getting the error
"Purchase order 4500000001 does not exist
What can be the reason??????????
Regards.

Dear All,
At last the problem has been resolved.
There was an userexit assigned to the no.range table where the new doc.type was hardcoded to bypass the logic for allotting a PO Number and the problem was resolved.
Since the problem has been resolved I am closing the thread.
THANKS EVERYBODY FOR YOUR VALUABLE INPUTS AND SUGGESTION.
Regards.

Order (HIS1) does not exist

Hello Experts,
while changing the status of an employee, the system displayed an error saying "Order HIS1 Does Not Exist"
what is that ?!
Thanks in advance

Hi,
On which screen are you getting this error on IT 0000 or IT 0001 screen?
As per my limited knowledge, Orders, Cost Centers and WBS elements are created in Controlling.
hence I asked you to check with your FI CO consultant if an order such as HIS1 exists in the specified period.
In the meanwhile we can wait for expert comments.
cheers
Ajay

COGI Recording Error: 'callback event CONTEXT_MENU does not exist'

Hello!
Our ABAP Team is facing a weird error when they try to record COGI via transaction SHDB. They are getting the following error 'callback event CONTEXT_MENU does not exist'.
We´ve been looking a note in Marketplace but we didn't find anything.
Could someone help us, in order to find the solution.

Make sure the "Not a Batch Input Session" checkbox is selected when recording.
If you plan on using this later as part of BDC, make sure that the NOBINPT field is set to X when using "OPTIONS FROM opt" per the SAP documentation on Call Transaction.

Sales document 187000001 does not exist

Sales document 187000001 does not exist
Message no. VB001
Can you please advice why this error occurs? I am creating sales order (RE) type with reference to actual sales order, during reversal process all the docuemnt generating but still not showing document deleted Archive
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
4. Billing Docuemnt Generated
Regards,
Vijay Sanguri
09324905500

I am creating sales order (RE) type with reference to actual sales order
First of all, this itself is wrong. Why you were creating return order with reference to original sale order. You should always create a return order with reference to billing document.
1. Sales order created
2. Delivery Generated
3. PGR Done
PGI Docuemnt not showing and
Again, I dont know why once you have done PGI, why you have created a return delivery ??
thanks
G. Lakshmipathi

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

DDIC_ACTIVATION error - Table /NFM/A_KNVVEXIT does not exist

Hello,
I'm getting a DDIC_ACTIVATION/TP_STEP_FAILURE error while importing ECC6 SP12-14 to my QAS system. In the log it's giving an error 'Table /NFM/A_KNVVEXIT does not exist'. This table does exist in DEV, but not in QAS.
Does anyone have an idea of how I can get this structure into my QAS system? Or why it isn't already there?
I have tried rerunning the queue in case it was just an order of operation error, but that doesn't seem to be the case this time.
Thank you,
Michael

Opened an customer message with SAP and they fixed logged in and fixed it.

BAPI_ACC_DOCUMENT_POST - Int.Order -E/KO/104/Order 400001234 does not exist

Hi Experts,
Am using BAPI_ACC_DOCUMENT_POST to post the docs, working fine, with populating min. fields in min. structures.
But, in some cases, am populating INTERNAL ORDER into ACCOUNTGL-ORDERID field, but, am getting an error, saying
E- KO-104--Order 400001234 does not exist
But, with the same input data, the FB50 is working!!!!!!!!!!!
So, pls. let me know How to fix it?
Is there any other field I hv to populate along with ACCOUNTGL-ORDERID, when am using INTERNAL ORDER?
thanq

Srinivas,
i am expecting the error might be converion problem. Please check for conversion routine for AUFNR(Internal Order) Field, before filling it to G/L Item table (before passing to Function module)
CONVERSION_EXIT_ALPHA_INPUT
CONVERSION_EXIT_ALPHA_OUTPUT
Some time back i have similar problem. it was solved after using converion routine before filling the G/L Item internal Table. this might be helpful for you
Thanks
Sekhar.

Why some times delivery will created through vl10c even sale order stock is not available?

Hi,
why some times delivery will created through vl10c in batchmode even sale order stock is not available?
Thanks,
Kalyan.

the correct english name is : Replenishment leadtime
Check with Replenishment lead time - Supply Chain Management (SCM) - SCN Wiki

Build Error : The name "LocalizedStrings" does not exist in the namespace

I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
Alfahisham

This is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >

<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham

COGI Error-Sales Order Stock does not exist

Similar Messages

Maybe you are looking for