Cogi Errors due to Material Substitution

Hello,
In plant 0162 we have cogi errors that I can not explain. It is related to material substition and BOM changes.the COGI error comes from the component material 10085940 in order 100239889. this material 10085940 was set for material substitution for material 10007152 on September 7, 2008 effective when i refer to BOM but the production order was created this august.why do we have this COGI error? we have 10007152 in house and none of the 10085940 material please answer and explain why this happen?
More thanks,
Ryan

Hi,
Where could i see this percentage for this in BOM? i have noticed in the production order compenet overview of my material the two material was there already both backflushing indicator was check, discontinuation column was populated on both material = 1 (simple discontinuation - maintain in master record). could this be a factor? why does my production order pick both this two material in its BOM 10085940 will be effective on 07.09.2008 this is weird and problematic to us.
Please advice what happen and fixed this one my cogi error said enter storage location for this 10085940 component.
and in CS03 when i look at the BOM:
10074921 (valid fr) 14.05.2008 (valid to) 07.09.2008 (change # 500001258 (change # to) 500001311
10085940 (valid fr) 07.09.2008 (valid to) 31.12.9999 (change # 500001311 (change # to ) blank
Please any help with this one for me to resolve this issue expert. please
Thanks
Ryan
Edited by: Ryan Lazaro on Aug 22, 2008 10:22 AM
Edited by: Ryan Lazaro on Aug 26, 2008 4:30 AM

Similar Messages

CIF errors due to material status

Hi All,
We are having lot of CIF errors due to material status "40" in CIF, which restrict creation of P.reqs and PO at source location.
Eg:- LOC1 is a manufacturing location and LOC2 is a Distribution centre. A new Product A introduced at both location, having status status "40" at both the location.
When APO creates P.Reqs with source as LOC1 and Destination as LOC2 for this product, these p.reqs get stuck in CIF queue, as plant specific status "40" doesn't allow creation of P.Reqs at LOC1 in ECC.
We thought of creating a new status "Z1", which would allow the creation of P.Reqs and PO. But the requirement was to allow only creation of P.Reqs and not PO. But in the config setting in ECC for material status there is common setting for P.Reqs and PO and cannot be differentiated.
Have anybody come across such problem and whats the way to address this issue.
Thanks & Regards
Shankar

Hi Shankar,
Please check list of enahncements in SMOD transaction. The enhacements related to Purchase documents start with "CIFPUR.."
Or other path in SPRO is as below:
In the ERP system under Integration with Other SAP Components >> Advanced Planning and Optimization >> Application-Specific Settings and Enhancements >>Settings and Enhancements for External Procurement.
Because of the blocked status of the material ,while transferring the PR/PO data, the CIF prrogram -function call for creating the purchasing document does not get triggered. As written in earlier mail, the enhancement on SAP ECC inbound may not help, because, the material status is picked up from ECC ( or SAP R/3) material master data and not taken from APO.
Neverthless, you may please have a look at these enhancements.
I hope this gives insight to you.
Regards
Datta

COGI error, material locked on user name.

Hello,
I have a problem regarding COGI error.
User was working on the COGI and system gets hanged. He restarted the system and again start working on COGI transaction.
But there was error for one line item is "The plant data of the material XXXX is locked by the user ABC".
I have deleted locked entries (with user name) by the transaction code SM12. But still COGI report shwos ths message.
Thanks to give me solution for this.

Do not delete the COGI entry, this is the very last option you should use.
The error messages is COGI indicate the error that occurred when the automatic goods movement failed. The error message is historical, it does not change when you reopen COGI. Select the COGI line and then select "save", this will try to reprocess the goods movement, if the material is not locked anymore the goods movement will process, else another error will occur.

Change Qty to 0 to clear COGI errors

Hello everyone,
I've been giving a temp job as a sort of MRP Controller for a materials handling company in the UK and have been given the task to clear the COGI errors. I'm new to this part of SAP as I used to work as an operator so never used any logistic or sales modules. Basically I think I have worked out what a COGI is and in princible about how to clear them. The orders have finshed and it is trying to backflush the material stock levels. The problem I am encoutering is this materials were used in orders early last year. The product has been made and shipped off to the vendor. I can see the stock being removed from the system months later in a stock check. The original backflush never happened as a lot or Materials never had the corect storage location. Anyhow, Can I clear these COGI's and the relevenant OrdRes on the materials by changing the COGI qty to 0 and then processing them? When I check the component list for the production order they go through as finialised (FLS is ticked), the OrdRes is removed however will this cause problems I'm unware of? I need to know if doing this right otherwise I need to get people to add the stock back in to clear the backlog and I have many to do and the process is painful and I want to sort this ASAP as the system is raising purshase requitions for parts need nearly a year ago and been built and sent off site!
Any help would be great...
Adam

Hi,
To do this you have to do following steps,
1. In the COGI list go to Edit - > Replace -> Date.(CtrlShiftF10)
2. Change the date to current date. This is required because the old posting periods will not be open for postings.
3. Select the line & click on Change details (F5).
4. Change the quantity to 0 (Zero).
5. Post the document.
Thanks,
Navin

In COGI error text "Multiple assignment of line item"

Hi Guru,
In COGI error text "Multiple assignment of line item"
Description:
ultiple assignment of a line ID
   Message no. M7357
iagnosis
   An item table, in which the line ID (LINE_ID)
   was transferred to the function module MB_CRE
ystem Response
   Processing is terminated.
rocedure
   Contact the system administration.
rocedure for System Administration
   There is an error in the calling application.
Please help me to resolved this issue.
Thanks and regards
PNU

Hi,
Thanks for reply,
It is possible to remove material from COGI list. We need to stop creation of this error.
Is there other solution to control creation of error "Multiple assignment of line item"
Thanx & regd.
PNU

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

Warning message for material substitution in ERP E-commerce

Hi Gurus,
We are implementing SAP ERP E-commerce with TREX, ECC 6.0 backend.
Automatic material substitution is working in ECC. The material is also dispalying a warining message before substitution.
In B2B shop the substituion works - material X is replaced with matereial y but there is no warning message during substituion.
I believe matereial substituion in E-commerce is standard funtionality and it should work as configured in ECC for VA01.
Any susgestion why there is no dispaly of any message during matereial sub in E-commerce.
Thank you

Hi Ram,
What type of messags can be displayed on ECO ERP can be configured via XCM "UI" component. By default only error messages are displayed, You can create a customer component with message severity set to 'Warning" / "info" as required. After this all the messages raised by the Standard BAPIs are displayed on the basket.
However you need to be careful what severity level you want to use as apart from the message that you require, lot of other messages might also be displayed on the basket.
Regards
Roopali

Cogi Error Deflicit of Unres.BA stock prev.

Hi
In COGI, I have tried to clear error in goods movements. But Inspite of stock available in storage location, system throws Deficit of Unrestricted stock and 0 goods movement successfully got executed. This is a halb material stock. I verfied stock overview also, absolutely no problem. Stock available in unrestricted stock under specified storage location.
What I understand Is there is logic for stock posting as below:
1.The Error generated by CO11N entry (261 mvmt) posting date was 27.02.2009. This means COGI got generated for the error goods movement with posting date 27.02.2009.
2. Stock Updated of error material which is used as Sfg in above case by 101(GR) in other location on 02.03.09 which means Posting date is later than 27.02.09.
That is why it is has create probelm as Deficit Unrestricted stock as stock posting date is later than error posting date.Now period's are also open for Feb 09 if i change the date of posting in error ,goods movement will be posted definietly.But this does not happen always because several times these type of cases happen in our scenario & without changing the posting date to current the system accept the cogi error to be posted pls. give you advices on this matter.
Rakesh Sehgal

Dear,
Creation date is the date when the material was created in the COGI. Error date is the date when the error was first created.
Please refer this thread,
Re: COGI - Diference between Error date, Creation date & posting date
How to solve COGI transaction after executing the transaction, Menu --> Edit --> Replace --> Date
Also please refer this thread,
Re: cogi
Regards,
R.Brahmankar

COGI-Error and Impact

It seems SDN is a very good Forum to Discuss .
I have an Issue , it is not a issue actaully But may be knowing about the system about one Transaction.
What is the impact of Transaction COGI error log ? As it shows , error in Storage location, Plant, Period is not open like these.Please explain.
-Thx,
John

In an example of an error in the Goods issue. the Material was set up to issue from SLOC 1000 and it was in 1010. Physically you issue the material from 1010 and there is an entry in COGI showing no material in 1000.
1 - the system will show inventory still in SLOC 1010
       Inventory account is overstated
      At time of physical inventory there will be a Loss of inventory reported
      When MRP runs, it will not plan for the inventory used, since the system sees it in 1010. Depending on the part and quantity involved, assembly lines could go down.
Depending on the part and quantity involved, inventory calculation turns could be affected
     If the failed Goods movement is corrected after inventory - the loss of inventory will be incorrectly offset by consumption. And then inventory will be incorrect again.
2 - Order settlement
      in Make to stock scenario, with released standard cost, a favorable mfg variance will (incorrectly) be posted, indicating that the cost to manufacture the assembly was less than planned for.
      in Make to order, where actual production costs are transferred to the sales order the actual costs will be low, the COS will be low and the Margin will be high.
that is some of the effect.
Our cost accountants do a review of COGI the last day of each month and require that corrections be made.

COGI errors - Enter Storage location

Hi Experts,
I have problem with my component materials in COGI txn..error is "Enter Storage location".
Step by step process:
But component material has storage location 1000 in material master. What might be the problem.
I do goods issue or 261 movement in COR6 or confirmation of process order.
Hope you could help me.
Thanks a lot

Hi,
System will check the str location in BOM.
If it is not found it will use str location determination strategy:
Strategy 1: System will check in component material master. If it is not found,
Strategy 2: System will check in production version.Issue str location & Receive str location If it is not found,
Strategy 3: System will check as per strategy 1 after that strategy 2.
Strategy 4: System will check as per strategy 2 after that strategy 1.
Try to maintain str location explained above. COGI error will not come.
Regards,
Dharma

Cogi error - Pipeline/consignment movement posted without value

Hi
I am getting a Cogi error Pipeline/consignment movement posted without value
This particular material was not having problem till last week and now all the time when confirmation of production order happens it goes to cogi with error
Price is maintained in info record
Please suggest

Dear friend,
some theory:
You always have 2 options - delete or process your COGI record.
Before to make a decision you need to analyse/find a reason why this error has happened.
run COGI;
tick your eror;
hit F6 (display errors) - bell icon
now you are able to see the reason.
depends on a reason (information you see now) you do your next steps
say, for instance, you did something to fix the reason,...
then
if you want to process, tick your error and Save
if everything is okay - system will POST it (cogi record will go away)
or , say, you do not care about the error -
tick your error and Delete
some practice:
please have a look at your material - probably someone changed it very recently - look at last changes using MM04 or MM03
good luck

COGI Error - RE Reserved quant. exceeded

Hi All,
First of All "Wish You A Happy New Year"
I got a issue with high priority in COGI transaction with Error Text " RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
Application Area M7 & Message Number 362.
The material is a raw material. I have verified the production order and found, the Requirement Qty for this raw material is 144,275.00, Committed quantity is 29,941.876 & the Withdrawl Qty is 147,667.284
I am new to this error issue in COGI. Can any one guide me what to do now and how to solve this issue quickly?
Thanks & Regards,
Phani Kumar

" RE Reserved quant. exceeded by 4,071.456 KG : CPXXXBRT 1000 R100"
since the material is activated as a Backflush, when the try to post extra qty compare to requirement qty for that reason, Goods movement is failed and log is created in COGi.
IF they client want the above qty issue against Planned consumption.
then they need to increase the requirement qty in CO02 by 4071.456, so that the reservation qty will equal as posting
IF they client want the above qty issue against unplanned consumption.
Then They can delete the COGI error and post the Goods issue in MB1A, with out entering order in initial screen and the add the order in MB1A and post the raw material

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Error while posting material using transaction code MB1C

Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHER

Dear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Background job finishes but error Error While Updating Material into Standard SAP5678

Dear
we run background job which finishes successfully but when we sqw logs it shows
Error While Updating Material into Standard SAP5678
Kindly share the reasons
Regards

This is an ERP Upgrade space and you should consider raising threads in the right space for prompt replies. Next time consider using SAP NetWeaver Administrator space for issues like these. Also you should consider closing your previous thread with the correct answer for future reference.
What I see is a custom job. You should check what the job does and also the trace file of the work process and the consult with the application team or the developer for more information. Unfortunately with that screenshot there is nothing much we can advice you.
Regards
RB

Cogi Errors due to Material Substitution

Similar Messages

Maybe you are looking for