COGI problem-Unusual

HI dudes,
Here i am getting COGI entries though our client is doing manual goods movements for the process order.The scenario is the batches
assigned to the components in the process order by production people and are changed by stores people who are doing goods issue through migo later on depends on various reasons and they are keeping the batches first assigned with zero quantity in the COR2 t-code.
Some times they are adding new materials in place of the materials copied from BOM.
After all goods mvts if the user want to do TECO due to various reasons warning message is thrown " post processing records exitst do you want to keep TECO "
what might be the reason.
Robert

Dear,
If any error occurs while goods movement, system records that error. This error we can resolve by certain transactions like COGI, MF46.
Say you are doing GI/GR, but stock is not available. However system post this GI/GR quantity with error message.
Either you can clear the COGI errors or delete the errors and then run COHV with function TECO,
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

OVI mail thunderbird sending problems - Unusual Ac...

Hi,
I have had issues sending email from Thunderbird since the migration of emails. I currently have my outgoing server set at smtp.mail.ovi.com
Last week I tried changing some settings on Thunderbird as it would not send any emails. I then received this responce:
The current command did not succeed. The mail server for account *******@ovi.com responded: [LIMIT] APPEND failed - Unusual Activity Detected. To protect you, your account has been suspended from sending, saving, and receiving for up to 48 hours.
This morning I changed the password on my account through ovi.com and then changed it back. I managed to send one email through thunderbird and then I got the above message again when it tried to move the message into the sent folder.
Now I can receive mail but not send. When thunderbird connects to send my email it does not verify my password. All I get is Login to server smtp.mail.ovi.com failed.
Any thoughts?
Thanks

Hi!
I also have the same problem.
Please some one help us
best regards
Francisco from Portugal

Ipod problem: unusually hot, charging problems

I got my ipod in May (it's a 30GB), and I've never had any problems with it until now. So, today I plug my ipod to my computer, about half an hour later, I feel my ipod and it was unusually hot. The screen didn't have any icons on it. I didn't have any ipod icons on my computer either, as if it wasn't even plugged in. I unplugged it, and plugged it in again. I noticed a battery sign (smaller than the usual) with an "!" on it. Then it started heating up again.
All my music/videos are fine, the only thing that I noticed was messed up was the date and hour, also the green/red battery sign.
I charge my ipod every day, so I don't think it was ever out of battery. I have it plugged in right now, and I can see the battery icon on it.
Basically, the problem is that it's plugged in, but it's not charging properly, or something like that, and it's overheating. o.O
Anyone know what I can do about this or where I can go?
Any help would be appreciated, thanks!

I believe I am having the same issues you had or are continuing to have. My ipod tells me 'please wait. very low battery'.. so i wait. eventually the black screen with the apple comes on, but remains for a very long time. then it begins to charge normally for maybe 5 minutes, it then shows me the battery is fully charged. yet as soon as i uplug it to use it or even try using its contents through itunes it shuts off telling me 'please wait. very low battery'. if this sounds similar to your problem please let me know what you have done to fix it, or what someone has told you to do.
thank you i am extremely frustrated.

Can i config not allow to TECO Order if order have list in COGI?

Dear any senior.
Can i config not allow to TECO Order if order have list in COGI?
i want to restrict user to can't not TECO order if have any material in COGI.
help me please.

Dear,
If there is COGI post processing error system give you the message There are still reprocessing records. Set order to technically complete?
Best practice is that first check post processing error and then go ahead for COHV.
Please refer this thread.
Re: COGI problem-Unusual
Regards,
R.Brahmankar

IMac G5 Hanging at spinning cog

I first posted a request for help to this problem on another thread re spinng cog problems. Unfortunately no-one answered! So I am posting it again in the hope that SOMEONE can help me or advise me as to what to do!
I tried the various usggestions on this link
http://support.apple.com/kb/HT4718
but, my iMac is four years old and so I cannot use the internet recovery!
I have tried the method from your link - still hangs on the spinning wheel. I read somewhere that this is when it switches over to launchd (or something!) I get exactly the same problem when I try to boot from the recovery disk or my backup disk (which is connected by firewire 800)
I connected my iMac G5 to my Macbook Pro via firewire. It booted up OK as a target disk on my MBP. So I ran disk uitility - Verify disk said the disk was OK. I repaired permissions. All were rrepaired except this message for one "Warning SUID file system has been modified and will not be repaired. I do not know what this means - and I have not (intentionally) modified anything! I also ran Disk Warrior and rebuilt directory
After all this - it still hangs at the same place - ie after the spinning cog has been running for about 30 secs
I read somewhere that MacKeeper has been causing lots of problems - could this be the cause? Has anyone else had the same? One thread said it was 'Spam'! Yet it sems to have a very high profile in advertising on so many sites!
I have tried all the reboot methods - still hangs at same place
HELP!
PS I have bitten the bullet in the last week (after not being able to boot up this 4 year old iMac! So, I ordered a new iMac - does this come with an installation DVD for LIon ? and, could I use that to do a clean install on my iMac? I do have (two) backup copies of all my data on the iMac Ia s belts and braces!
I HOPE that one of you experts can advise me - I live in a small remote village in the French Alps and the nearest Apple dealer is thre hours away - so If there is anyhting I can do to resurect my Imac myself this would save me a lot of time, hassle - and money!
Thanks
Alan

Hi
Thanks - yes I have ordered extended Apple Care! I forgot re the complete switch to downloads. drive! I do not feel like paying $70 for a USB drive!
If I followed parts of the huge post of ds store correctly I thnk he described how it is possible to make a copy of LIon onto an external forewire drive - can he confirm this please? I have a 40GB La cie that is lying doing nothing and I guess this would be OK?
Thank you both again. If I can make a copy of lIon on the LaCie drive - and IF I can reinstall LIon on my Four year old Intel iMac - I will let you know. However, as an experiment I tried last night to boot from my Snow Lepoard disk. It hung at the same point ie 30 seconds in!
I do wish I knew what COULD be causing this - before I make a huge journey down to the Apple Store. It seems starnge to me that I can connect it to my Macbook Pro by firewire (boot up as target) and access everything OK - even from other drives attached to the iMac! So, what is it that has gone 'wrong' in the boot proces?
As I said above
" I repaired permissions. All were rrepaired except this message for one "Warning SUID file system has been modified and will not be repaired. I do not know what this means - and I have not (intentionally) modified anything! I also ran Disk Warrior and rebuilt directory"
So, if anyone knows what this SUID system means - and IF this could be the problem - and IF I can repair this myself.
Thanks again
Alan

Dependent goods Movement was incorrect

Hi all
I am having an error in my COGI whenever I confirm a collective order. Error says that "Dependent goods Movement was incorrect". What does that mean?

There could be a program error in standard SAP. I would suggest you to search in OSS, I found the following notes and error RU523 will be raised for different settings in IMG due to bug,
458140      RU523: Incorrect grouping of dependent goods movements
793058      RU523: Incorrect summary of dependent goods movements
389690      Collective order confirmation: Storage location transfer
354564      Collective order:dependent goods movement incorrect
577515      RU523: Incorrect summary of dependent goods movements
374707      Confirmation:goods movement with separate valuation
542451      COGI: Entries with C6013 without error date/error time
576663      RU523: Unnecessary summary of dependent goods movements
412329      COGI: Problems with dependent goods movements
331421      Confirmation: Goods movement with split valuation
513786      Dependent goods movements are separated
327137      Problems with dependent goods movements as of Release 4.5
412329      COGI: Problems with dependent goods movements
680650      Cannot get initial context or service "FILE".
1453716      SXS library: Missing function modules

1950-Battery level drops suddenly to 5%

Hi,
I have a Satellite 1950-902. I was wondering if someone could help with the following problem/unusual behaviour that began about a month ago:
I start using the laptop with the battery showing up as being full in Power Management. After about ten minutes of battery use, as soon as the battery level shows as being around 85%, the battery level indication suddenly drops sharply to 5%, and the system hibernates. When I recharge the battery, the charging process takes a very short time (about half an hour).
This behaviour is repeated every time I use the battery now.
What is going wrong?
Thanks.

Hi Eleni,
It sounds as if some of the cells in your battery may have failed and consequently the battery can only hold a small portion of the normal charge. I would suggest a new battery is called for.
regards,

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

Unusual problem using Arial Black font with #'s

We have encountered a rather unusual problem.
Recently one of our customers contacted us about a problem with their job. They used #'s in arial black and regular throughout their document. Everywhere the #'s were in Arial Black they came out looking like an entirely different font. All of the files that we have created from their document appear correctly. Even the proofs created from the files printed correctly. However at the point of Esko's Nexus program creating the tiff file to make the press plates we are getting the incorrect results. I have even created a new document using our fonts in multiple sizes and I am getting the same results. As you can see the rest of the text in the same font is imaging properly. It is only the #'s that are the problem.
This is a screen capture of the PDF I created:
This is a screen capture of the results from the plate tiff image:
I am positive that it is not an issue with Esko's Nexus software as I have recreated this text in Quark, Miccrosoft Word, and Microsoft Publisher and they all imaged properly.
I am only encountering this with Adobe software. I am getting the same results from both InDesign and Illustrator. I have run the file from multiple Macs with various OS systems and from a PC each with their own font sets. I have even run the file from all versions of InDesign that we own (CC2014, CC, CS6, CS5.5) and they ALL give me incorrect results. As you can see from the images above it is ONLY the # character in Arial Black that is a problem.
I'm at a loss as to how to solve this problem.
Larry Meirndorf
BRD Printing
Prepress Supervisor

Images of full font set:
Correct from Quark:
Incorrect from InDesign:

Unusual problem with N95

Hello guys, as title says i have an unusual problem with my Nokia n95. Friend gave me few days ago and I wanted to update software at it, i did it few HRs ago (from 21.x to 31.0.017) and now I have problem. The thing is from when i did the update the phone keep lighting camera and up-down buttons from some time intervals( i'm not sure how much). I even did Initial restart and i've re-installed software also.. Any idea how to fix this ?
Thanks anyway!

Yeah thats what i did last, for now it's not lighting every time just when I ( for example enter camera, make photo/zoom and close application,after that i'ts lighting for few minuts), it's not about mask, I've tested it already with not mask ..
It never happened before I updated the device..

Unusual problem with NumPad

I have quite an unusual problem with my iMac and I'm hoping someone has the answer. I will do my best to explain what's going on.
I started using a new program called Blender, which is an open source 3D modeling suite. In it, there are hotkeys which are required to function the program, like, CONTROL + NUMPAD 1, 2, 3 and so on...
I have a full size keyboard with NUMPAD, so this is not a problem for me. However...
When I attempt to press CONTROL + NUMPAD 1 (for example), it does not trigger the correct function in Blender. Instead, it switches SPACES to the corresponding SPACE. So, if I press CONTROL + NUMPAD 3, it displays my THIRD SPACE.
This seemed simple enough to fix. I opened System Preferences, Keyboard, Keyboard Shortcuts and changed the hotkeys for SPACES to COMMAND, rather than CONTROL. However, this did not fix the problem entirely. Even though it managed to disable my top row of numbers as hotkeys for switching spaces, it did NOT change the NUMPAD functionality. If I hit CONTROL + NUMPAD 3, it STILL switched to my third space, despite me altering the hotkey to be COMMAND + #. It continues...
I didn't really need this functionality from SPACES so I decided to try disabling it altogether. Once again, I opened System Preferences, Keyboard, Keyboard Shortcuts but THIS time, I unchecked "Switch to Desktop 1,2,3,4" hotkeys so as to disable the funtionality entirely. Despite this, it STILL did not work. I was STILL able to press CONTROL + NUMPAD #, and switch to the corresponding SPACE. I restarted OS X hoping something might change but it did not. I CANNOT disable this functionality and it is hijacking the ability to operate the Blender program.
The problem gets stranger...
I ask my Fiance, who has an identical iMac AND keyboard, running OS X Lion just as I am to attempt to perform similar actions. She was NOT able to switch SPACES by pressing CONTROL + NUMPAD #. Ironically, under HER system preferences, the keyboard shortcuts were all enabled and defaulted to CONTROL + #, yet she could not duplicate my problem on her iMac. As you can imagine, I was getting quite confused at this point and very frustrated. We tried switching keyboards. Same thing. On my iMac, I cannot disable the SPACES hotkey CONTROL + NUMPAD # and on my Fiance's iMac, she can not ENABLE it.
In summary, whenever I press CONTROL + NUMPAD #, OS X switches to the corresponding SPACE. I've tried disabling the shortcuts under System Preferences but the problem persists. My Fiance has the exacty OPPOSITE problem and cannot enable the functionality. It's not the keyboard and we're running identical iMacs running OS X Lion. Any help would be INCREDIBLY appreciated! Thanks!

As a matter of fact, I do have a solution, at least, one that one my laptop.
First, a couple of trouble shooting steps:
Create a new user a log as the new user. If the new user doesn't have they Control-Numpad issue, you are probably looking at a user preferences issue.
Start in safe mode (hold shift while booting). Any number of extensions may map these keys for you (as a favor, of course)
That said, I suspect that this is a user preferences issue; such as it was for me.
The solution is to remove the symbolichotkeys property list file; it should be regenerated cleanly when you next log in. The two files you need to remove are:
~/Library/Preferences/com.apple.symbolichotkeys.plist
~/Library/Preferences/com.apple.symbolichotkeys.plist.lockfile
I always suggest having a system backup before fiddling, and I moved the files to my desktop temporarily (just in case!) before rebooting, testing, and finally deleting them.
Here is some information on the files:
http://hintsforums.macworld.com/showthread.php?t=114785
Let me know if that solves your problem; it was a bear to track down.

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Unusual Problem in SAP Query

Hi Experts,
I am facing a very Unusual problem in during SAP Query Devlopment.
In Input screen I am taking value as User , which is coming from User02 table and field name is
Bname . In USR02 table Username is maintained boths as Numeric num ( like 1236533) and Username wise ( Like gd.anil etc).
But While running the query , Its execute only when giving the nUmeric Num , It wont executes if i give the name like gd.anil .
This gd.anil is also maintained in USr02 table .
Can anyone tell me why its happening.
Thanks .
Koro

If the user ID is actually stored as lower case, then it was entered directly or with a screen field that doesn't have a screen mask. You are most likely using the DB field in your selection screen and it's being converted to upper case after entry but before selection. Have you debugged the generated program? You should see this in the query.

Como soluciono este problema: Runtime Error!... This application has resquested the Runtime to terminate it in an unusual way.

No puedo trabajar en photoshop, me envia una ventana con lo siguiente:
Runtime Error!... This application has resquested the Runtime to terminate it in an unusual way.
Y se cierra el programa, como puedo resolver el problema, es adobe phothosop elements 7 en windows vista.

This problem can have many different causes, so the steps to solve can vary / be complex.
Firstly, have you installed any non-Microsoft programs recently?
If so, this could be the cause of the errors, try to uninstall the programs.
Some other discussions (rather complex), which suggest that Explorer-extensions can be the cause of this:
http://social.technet.microsoft.com/Forums/en-US/bf414bb1-8c48-4114-874f-341cc7d8db68/explorerexe-crashes-with-c4343-runtime-error-during-file-search?forum=w7itproperf
http://social.technet.microsoft.com/Forums/en-US/3a6e2cfe-ef5b-4547-a832-946a3cc82e8e/microsoft-visual-c-runtime-library-runtime-error?forum=w7itproappcompat
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Unusual Problem caused by/with flash?

An unusual problem recently developed from flash and cannot resolve. I am running windows XP service pack 3 and i have flash 10.1 running. The problem that i have run into is this, when i have the internet browser open and i leave it idle for 5 minutes a windows error message comes up that says:
Could not find file "Flash.ocx"
Prior to 8/10/2010 this never happened, additionally I have looked in the appropriate folders on my system and the program seem to be there. I have also checked the program with Adobe and there system says program is up to date and functioning properly on both internet browsers that I use which are: IE8 and Google Chrome. Can anyone help to identify this problem as i am unsure of what steps to take to correct this issue and Microsoft has become completely useless.

Hi, I would not suggest a System Restore, especially if you have all Flash Player files and the SWO correctly Installed.
There could be another reason if you continue to get that message. System Restore is not a "fix" per se, it is there for your Windows Operating System in case of failure. I know people use it for other reasons, but just speaking for myself, I never have. I just research and find out the solution to whatever issue I may have at the time.
Any add on in your IE browser from whatever source can conflict with the browser, Flash Player (the SWO ActiveX Control) or other add ons. Especially any Anti-Virus program add ons. So you may want to check those to see if that is happening. Toolbars and their browser add ons also.
Go to C:\Windows\System32\Macromed\Flash Open Flash and post back all files listed there just to make sure they are correct.
Thanks,
eidnolb

COGI problem-Unusual

Similar Messages

Maybe you are looking for