COGNOS-7 Not Showing Results of EBS Views
Hi,
I have a problem relating to Cognos-7 and EBS-12 Views, I am not able to get data in cognos reports if I use EBS views instead of Tables.
Appreciate any input to solve the issue.
Thanks in Advance.
Regard.
Most views in EBS are secured views. To access data thru a view, you need to set your environment. Pl see MOS Doc 420787.1 (Oracle Applications Multiple Organizations Access Control for Custom Code) for a discussion
HTH
Srini
Similar Messages
-
Not showing results in simulation
hiii,
i made some chngs in (generate work schedule manually) in development server and transported to production server.
it is transported as i can view the changes but not showing result in simulation run, wats the reason...
ThanksNational Holiday is a simple Off and Paid Day.
So, hw u want the system to consider tht holdiay in payroll ?
might be u have to check in Time Evaluation for considering National Holdiay and wrkin any any spl. .payments towards it.
theere may not be any change of effect due to Holiday in Payroll until and unless the Absence Records if existing on dates of Holiday... then u mite have to delete the Absence Records and Update it again.
Or there is a report that need to be generated to remove the inconsistency... which currently dont have idea... will check n let u knw... in the mean while u can follow deleting the record and update Absence on Holiday again.
Regards
...Sadhu -
Old All-Day events not showing in Calendar List View
Reviewing events in my Calendar on the iPhone and have noticed that All Day Events that are older than one year do not show in the "List" view
For example, I have all my holidays in a calendar called "Vacation". Month and Day view list holidays from earlier than today (09 Sept 2008) properly, however list view shows nothing. Timed events (e.g. day trips) in the same calendar show.
Similarly no Birthdays appear in the past. I can see a case for Birthdays being omitted in the past, but not other events (e.g. wanting to know exactly when you went to that all day wedding last summer)I have this same exact problem. For me, past events that have a specific time associated with them show up in List view; however, past events that are all day events only show in List view once in a blue moon only. Apple support has been absolutely clueless about this issue. They just tell me it's weird and they have no explanation. It's unbelievably annoying though.
-
Why some times jdeveloper does not show a coreect design view ?
Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanksAlso try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald -
Calendar events not showing up in list view
Hi,
some of my events are not showing up in list view. They are synced to the iphone. I can see them in day and month view.
It seems to me that events created with ical and synced through MM are not showing up, but I'm not sure.
Any idea?
Wilfried.Yes I have also events from the holidays and the events I created.(Invitations and others) but where is this option for the NC? In general>notifications I can't find anything about showing events from different calendars there. And how is this subscription made because I had the holidays as soon as I input my account on this device. Maybe I included the holiday calendar but I don't remember. How is that made? And where to find these options?
-
Calendar items not showing ONLY in list view on iPhone
Weird: My Calendar items are not showing in the list view only, on iPhone.
They show when I search, they show in month, they show in Day views--just NOT in list view.
Ideas?I just had the same problem (calendar information--for eight different calendars--OK on laptop and on Mobile me; on the iPhone only 3 of my calendars were displaying in "List" view, but all eight were appearing in "Day" view); first time I've encountered this problem (and immediately after installing the 11-February-2010 iPhone software update, so I'm suspicious that this might have been the cause).
Solution described in posting immediately above seems to have worked. I.e.,:
1. shut OFF MobileMe syncing for calendars on the iPhone (from Settings menu);
2. wait for calendar entries to be removed;
3. shut off iPhone, and wait 2 minutes;
4. restart iPhone;
5. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu).
All eight calendars now appear in List view (and still appear in Day view). -
New tables & indexes created do not show up in dba_segments view
Dear all,
I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work. Please do advice. Thank you very much in advance.
I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.
For the purpose of reproducing this issue, I have created the tablespaces as follow:
CREATE TABLESPACE CUST_DATA
DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_DATA01.DBF' SIZE 512K
AUTOEXTEND ON NEXT 256K MAXSIZE 2000K
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLESPACE CUST_INDX
DATAFILE 'd:\app\asus\oradata\orcl11gr2\CUST_INDX.DBF' SIZE 256K
AUTOEXTEND ON NEXT 128K MAXSIZE 2000K
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 128K
SEGMENT SPACE MANAGEMENT AUTO;
CREATE TABLE CUSTOMER_MASTER (CUST_ID VARCHAR2 (10),
CUST_NAME VARCHAR2 (30),
EMAIL VARCHAR2 (30),
DOB DATE,
ADD_TYPE CHAR (2) CONSTRAINT CK_ADD_TYPE CHECK (ADD_TYPE IN ('B1','B2','H1','H2')),
CRE_USER VARCHAR2 (5) DEFAULT USER,
CRE_TIME TIMESTAMP (3) DEFAULT SYSTIMESTAMP,
MOD_USER VARCHAR2 (5),
MOD_TIME TIMESTAMP (3),
CONSTRAINT PK_CUSTOMER_MASTER PRIMARY KEY (CUST_ID) USING INDEX TABLESPACE CUST_INDX)
TABLESPACE CUST_DATA;
SQL> SELECT TABLE_NAME, TABLESPACE_NAME
2 FROM USER_TABLES
3 WHERE TABLE_NAME LIKE 'CUST%';
TABLE_NAME TABLESPACE_NAME
CUSTOMER_MASTER CUST_DATA
SQL> SELECT INDEX_NAME, TABLESPACE_NAME
2 FROM USER_INDEXES
3 WHERE TABLE_NAME LIKE '%CUST%';
INDEX_NAME TABLESPACE_NAME
PK_CUSTOMER_MASTER CUST_INDX
SQL> SELECT SEGMENT_NAME, SEGMENT_TYPE, TABLESPACE_NAME, BYTES
2 FROM USER_SEGMENTS;
no rows selectedPrior to 11g, when you created a table or whatever, you automatically allocated one extent.
This is now no longer true and depends on a parameter I don't remember.
dba_segments is a summary of dba_extents.
Obviously, if there is no extent allocated, the table (view is defined with inner join) will not show up.
You could qualify this is as a bug and submit a SR to Oracle. But then the performance impact may be huge.
Sybrand Bakker
Senior Oracle DBA -
Text in landscape orientation is not showing up in portrait view
When I have added additional pages while working in landscape mode and added text to these pages, the text is not showing in portrait view. The only text that shows is the one that comes if I have used the default text box in the 2 column mode. Even using the default textbook I find is not looking good because extra spaces I am putting in for landscape mode aren't needed in the other view. Finally, the headers are also not showing up in portrait view. What to do?
Other difficulties:
1) hyperlinking text is defaulting to the hyperlink character style which is not letting me change the colour from red to blue.
2) jpg images are not being recognized as figures. I would like to be able to bookmark the images, but it is not allowing me. I would also like to have them show in portrait mode, but they are not.
Thank you!!!Sorry if I'm being daft, but what do you mean by linking the text fields? I have one text box in landscape view. When I go to portrait, it no longer exists. If I insert a text box in portrait view, it does not appear in landscape.
I'm not sure if this is the same problem, but I'm hoping you might have some ideas.
Thanks. -
Date not showed when report is viewed in PDF .
Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now. -
Narrative is not showing up in Layout View
Narrative is not showing up in layout view when I'm creating a custom report. In Step 2, Creating Layout. I am hovering over add view, then down to advanced. Narrative is not showing up. How do I get this to work??? Static text and Legend is not showing either.
Thank you for your help!!Hello,
You need to have the privilege Analytics Scripting in step 4 for the narrative report to work. Only then would you HTML and javascript you apply on the Narrative report would show up.
Please update if this works or not.
Regards,
Paul -
Segment builder,not showing results.
hi experts
While creating a campaign i assigned marketing attributes to business partner .its visible in the marketing tab page in the respective bp but in the segment builder its not showing results.Hello,
have you added the marketing attributes as a data source to the Segment Builder using Transaciton Code CRMD_MKTDS?
Regards
Gregor -
Hi!
I am unable to get the result for my one of the item as checkbox. Other two are working properly .Please check and let me know wheres the problem please.
***INCLUDE ZSD_CONTRACT_LIST_T01_RENTAL1 .
TABLES: vbak, vbap, wbrk, zsdsched,vbkd, fplt, fpla, tvlvt.
TYPE-POOLS: slis.
data: BEGIN OF gt_report occurs 0,
vbeln LIKE vbak-vbeln, "Sales Document
posnr LIKE vbap-posnr, "Item
ernam LIKE vbak-ernam, "Created by
erdat LIKE vbak-erdat, "Created on
audat LIKE vbak-audat, "Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document type
vkorg LIKE vbak-vkorg, "Sales Org
vtweg LIKE vbak-vtweg, "Distribution Channel
spart LIKE vbak-spart, "Division
vkbur LIKE vbak-vkbur, "Sales Office
guebg LIKE vbak-guebg, "Valid from date
gueen LIKE vbak-gueen, "Valid to date kunnrt LIKE kna1-name1, "Sold-to Name
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
kunnr LIKE vbak-kunnr, "Sold-to party
kunnrt LIKE kna1-name1, "Sold-to Name
kvgr4 LIKE vbak-kvgr4, "Territory
matnr LIKE vbap-matnr, "Material
arktx LIKE vbap-arktx, "Material Short Text
charg LIKE vbap-charg, "Batch
matkl LIKE vbap-matkl, "Material Group
pstyv LIKE vbap-pstyv, "Item Category
zmeng LIKE vbap-zmeng, "Target Quantity
zieme LIKE vbap-zieme, "Target Unit
kdmat LIKE vbap-kdmat, "Customer Material Number
werks LIKE vbap-werks, "Plant
lgort LIKE vbap-lgort, "Storage Location
vstel LIKE vbap-vstel, "Shipping Point
route LIKE vbap-route, "Route
netpr LIKE vbap-netpr, "Net Price
kpein LIKE vbap-kpein, "Condition Price Unit
kmein LIKE vbap-kmein, "Condition Unit
shkzg LIKE vbap-shkzg, "Returns Item
oidrc LIKE vbap-oidrc, "DRC Code
kunwe LIKE vbap-oid_ship, "Ship-to
aufnr LIKE vbap-aufnr, "Order Number
vkaus LIKE vbap-vkaus, "Usage
kunwet LIKE kna1-name1, "Ship-to Name
zzwprofid LIKE vbap-zzwprofid, "Waste Profile ID
kunre LIKE wbrk-kunre, "Bill-to
kunret LIKE kna1-name1, "Bill-to Name
addl_schd LIKE icon-id, "Push Button For addl line
datab LIKE zsdsched-datab, "Valid-From Date
datbi LIKE zsdsched-datbi, "Valid To Date
zschdfreq LIKE zsdsched-zschdfreq, "Contract schedule frequency
frequency LIKE zsdsched-frequency, "Frequency
monday LIKE zsdsched-monday, "Mondays
tuesday LIKE zsdsched-tuesday, "Tuesdays
wednesday LIKE zsdsched-wednesday, "Wednesdays
thursday LIKE zsdsched-thursday, "Thursdays
friday LIKE zsdsched-friday, "Fridays
saturday LIKE zsdsched-saturday, "Saturdays
sunday LIKE zsdsched-sunday, "Sundays
dzieme LIKE zsdsched-dzieme, "Target quantity UoM
comments LIKE zsdsched-comments, "Comments
END OF gt_report.
data: Begin of gt_report1 occurs 0,
fksaf LIKE fplt-fksaf,
afdat LIKE fplt-afdat,
fakwr LIKE fplt-fakwr,
fkdat LIKE fplt-fkdat,
nfdat LIKE fplt-nfdat,
fpart LIKE fpla-fpart,
bedat LIKE fpla-bedat,
endat LIKE fpla-endat,
horiz LIKE fpla-horiz,
bezei LIKE tvlvt-bezei,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
ernam LIKE vbak-ernam,
guebg LIKE vbak-guebg,
gueen LIKE vbak-gueen,
auart LIKE vbak-auart,
kunnr LIKE vbak-kunnr,
kvgr4 LIKE vbak-kvgr4,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
vtweg LIKE vbak-vtweg,
vbtyp LIKE vbak-vbtyp,
name1 LIKE kna1-name1,
pstyv LIKE vbap-pstyv,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
oid_ship LIKE vbap-oid_ship,
kpein LIKE vbap-kpein,
kmein LIKE vbap-kmein,
netpr LIKE vbap-netpr,
kdmat LIKE vbap-kdmat,
posnr LIKE vbap-posnr,
matkl LIKE vbap-matkl,
aufnr LIKE vbap-aufnr,
vkaus LIKE vbap-vkaus,
route LIKE vbap-route,
kunre LIKE wbrk-kunre, "Bill-to
kunwe LIKE vbap-oid_ship, "Ship-to
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
End of gt_report1.
data: gs_report LIKE LINE OF gt_report,
gs_report1 LIKE LINE OF gt_report1,
gt_sched TYPE TABLE OF zsdsched,
gt_sched_tmp TYPE TABLE OF zsdsched,
gs_sched TYPE zsdsched,
gt_sel LIKE gt_report OCCURS 0,
gt_sel1 LIKE gt_report1 OCCURS 0,
gt_vbpa TYPE TABLE OF vbpa,
gs_vbpa TYPE vbpa,
gv_auart TYPE auart,
gv_counter TYPE i.
**-- ALV variables
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort TYPE slis_sortinfo_alv, "Sorting list
gt_sort TYPE slis_t_sortinfo_alv, "Sort
gs_layout TYPE slis_layout_alv, "List Layout
gs_variant TYPE disvariant, "Display Variant
gv_repid LIKE sy-repid,
gv_save(1) TYPE c,
ls_fieldcat1 TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat1 TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort1 TYPE slis_sortinfo_alv, "Sorting list
gt_sort1 TYPE slis_t_sortinfo_alv, "Sort
gs_layout1 TYPE slis_layout_alv, "List Layout
gs_variant1 TYPE disvariant, "Display Variant
gv_repid1 LIKE sy-repid,
gv_exit(1) TYPE c.
CONSTANTS: gc_a TYPE c VALUE 'A',
gc_g TYPE c VALUE 'G',
gc_re(2) TYPE c VALUE 'RE'.
Screen-control Variables
CONTROLS:
tctrl_sched TYPE TABLEVIEW USING SCREEN 1010. " Schedule lines.
*& Report ZSD_CONTRACT_LIST
*& Created on: January 21, 2007
*& Description: List of Contracts - ALV
REPORT zsd_contract_list_rental1.
INCLUDE zsd_contract_list_t01_rental1.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK m1 WITH FRAME TITLE text-t01.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t02.
SELECT-OPTIONS: s_vkorg FOR vbak-vkorg MEMORY ID vko,
s_vtweg FOR vbak-vtweg MEMORY ID vtw,
s_spart FOR vbak-spart MEMORY ID spa,
s_vkbur FOR vbak-vkbur MEMORY ID vkb.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_erdat FOR vbak-erdat,
s_ernam FOR vbak-ernam,
s_guebg FOR vbak-guebg,
s_gueen FOR vbak-gueen,
s_auart FOR gv_auart MEMORY ID vta
MATCHCODE OBJECT h_vakz,
s_fkarv FOR fplt-fkarv.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
s_kunnr FOR vbak-kunnr,
s_kunwe FOR vbap-oid_ship,
s_kunre FOR wbrk-kunre.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: s_werks FOR vbap-werks MEMORY ID wrk,
s_lgort FOR vbap-lgort MEMORY ID lag,
s_vstel FOR vbap-vstel MEMORY ID vst,
s_route for vbap-route,
s_matnr FOR vbap-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t04.
PARAMETERS: p_varia TYPE disvariant-variant MEMORY ID wrk,
p_all AS CHECKBOX DEFAULT 'X',
p_group AS CHECKBOX DEFAULT 'X',
p_rental AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK m1.
Start of Selection
START-OF-SELECTION.
PERFORM get_data.
Display ALV
END-OF-SELECTION.
IF gt_report[] IS INITIAL.
MESSAGE s419(brain).
ELSE.
PERFORM create_alv.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varia.
PERFORM f01_f4_variant CHANGING p_varia.
*& Form get_data
text
FORM get_data .
select the appropriate rental data.
IF p_rental IS NOT INITIAL AND ( ( p_all IS INITIAL ) AND ( p_group IS INITIAL ) ).
SELECT avbeln aerdat aernam aaudat avbtyp aauart a~vkorg
avtweg aspart avkbur aguebg agueen akunnr a~kvgr4
bpstyv bmatnr bwerks boid_ship bkpein bkmein
bnetpr bkdmat bposnr bmatkl baufnr bvkaus b~route
dbezei efkarv eafdat efakwr efkdat enfdat e~fksaf
ffpart fbedat fendat fhoriz flodat ftndat b~oid_ship AS kunwe
INTO CORRESPONDING FIELDS OF TABLE gt_sel1
FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INNER JOIN vbpa as c ON avbeln = cvbeln
INNER JOIN vbkd AS g ON avbeln = gvbeln
INNER JOIN fplt AS e ON gfplnr = efplnr
INNER JOIN fpla AS f ON efplnr = ffplnr
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr
AND e~fkarv IN s_fkarv
AND e~fksaf = 'A'
OR e~fksaf = 'B'.
sort gt_sel1.
*ENDIF.
IF NOT gt_sel1[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel1
WHERE vbeln = gt_sel1-vbeln
AND parvw = gc_re.
Loop through captured data for additional information
LOOP AT gt_sel1 INTO gs_report1.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
posnr = gs_report1-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report1-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report1-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunnr ).
gs_report1-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunwe ).
gs_report1-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
APPEND gs_report1 TO gt_report1.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report1.
*ENDIF.
ELSE.
IF ( ( p_all IS NOT INITIAL ) OR ( p_group IS NOT INITIAL ) ) AND p_rental IS INITIAL.
Select the appropriate contract data.
SELECT a~vbeln a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~oidrc b~oid_ship AS kunwe
b~zzwprofid c~datbi c~datab b~route
baufnr bvkaus d~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln AND
b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr.
SORT gt_sel.
ENDIF.
IF NOT gt_sel[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
endif.
Select the remaining records from the ZSDSCHED Table.
IF p_group IS NOT INITIAL.
SELECT * FROM zsdsched
INTO TABLE gt_sched
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND posnr = gt_sel-posnr.
SORT gt_sched.
ENDIF.
Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
IF NOT p_group IS INITIAL.
If we are grouping the lines add the icon button.
LOOP AT gt_sched INTO gs_sched WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
IF gv_counter > 0.
gs_report-addl_schd = '@1E@'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING gs_sched TO gs_report.
ADD 1 TO gv_counter.
ENDLOOP.
ELSE.
Otherwise get the rest of the schedule information
READ TABLE gt_sched INTO gs_sched
WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
datbi = gs_report-datbi
datab = gs_report-datab.
IF sy-subrc = 0.
MOVE-CORRESPONDING gs_sched TO gs_report.
ENDIF.
ENDIF.
APPEND gs_report TO gt_report.
ENDLOOP.
Remove any duplicates from the reporting table
DELETE ADJACENT DUPLICATES FROM gt_report.
If Show all records is initial, delete non-scheduled lines (ex. Sub-items)
IF p_all IS INITIAL.
DELETE gt_report WHERE datbi = 0
AND datab = 0.
ENDIF.
endif.
endif.
ENDFORM. " get_data
*& Form create_alv
text
FORM create_alv .
if ( ( p_all is not initial ) or ( p_group is not initial ) ) and p_rental is initial.
PERFORM initialize_fieldcat USING gt_fieldcat[].
PERFORM populate_layout CHANGING gs_layout
gs_variant.
PERFORM populate_sort USING gt_sort[].
PERFORM display_alv_report.
else.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
PERFORM initialize_fieldcat1 USING gt_fieldcat1[].
PERFORM populate_layout1 CHANGING gs_layout1
gs_variant1.
PERFORM populate_sort1 USING gt_sort1[].
PERFORM display_alv_report1.
*endif.
*endif.
ENDFORM. " create_alv
*& Form initialize_fieldcat
Get and enhance the field catalog data
-->L_FIELDCAT[] text
FORM initialize_fieldcat USING l_fieldcat TYPE slis_t_fieldcat_alv.
IF p_rental IS NOT INITIAL .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ENDIF.
ENDIF.
ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
FORM populate_layout CHANGING gs_layout TYPE slis_layout_alv
gs_variant TYPE disvariant.
gs_layout-colwidth_optimize = 'X'.
gs_layout-allow_switch_to_list = 'X'.
gs_layout-zebra = 'X'.
gs_variant-report = sy-repid.
ENDFORM. " populate_layout
*& Form populate_sort
text
-->l_SORT[] text
FORM populate_sort USING l_sort TYPE slis_t_sortinfo_alv.
ENDFORM. " populate_sort
*& Form display_alv_report
FORM display_alv_report .
gv_repid = sy-repid.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_report
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ELSE.
IF p_rental IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = GT_REPORT1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endif.
endif.
ENDFORM. " display_alv_report
*& Form initialize_fieldcat1
Get and enhance the field catalog data for rental fields
-->L_FIELDCAT[] text
*FORM initialize_fieldcat1 USING l_fieldcat1 TYPE slis_t_fieldcat_alv.
**if ***
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
**else.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
***endfi.
*ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
*FORM populate_layout1 CHANGING gs_layout1 TYPE slis_layout_alv
gs_variant1 TYPE disvariant.
gs_layout1-colwidth_optimize = 'X'.
gs_layout1-allow_switch_to_list = 'X'.
gs_layout1-zebra = 'X'.
gs_variant1-report = sy-repid.
*ENDFORM. " populate_layout
***& Form populate_sort
text
-->l_SORT[] text
*FORM populate_sort1 USING l_sort TYPE slis_t_sortinfo_alv.
*ENDFORM. " populate_sort
***& Form display_alv_report
*FORM display_alv_report1 .
gv_repid = sy-repid.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'gt_sel1'
is_layout = gs_layout1
it_fieldcat = gt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort1
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant1
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_sel1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*endif.
*ENDFORM. " display_alv_report
*& Form f01_f4_variant
Get the Layout variant for the user.
FORM f01_f4_variant CHANGING c_variant TYPE disvariant-variant.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
it_default_fieldcat =
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f01_f4_variant
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE gt_report INTO gs_report INDEX rs_selfield-tabindex.
CHECK sy-subrc = 0.
CASE rs_selfield-fieldname.
WHEN 'VBELN'.
Set parameter ID for transaction screen field
CHECK NOT gs_report-vbeln IS INITIAL.
SET PARAMETER ID 'KTN' FIELD gs_report-vbeln.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
WHEN 'ADDL_SCHD'.
CHECK NOT gs_report-addl_schd IS INITIAL.
REFRESH gt_sched_tmp.
LOOP AT gt_sched INTO gs_sched
WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
APPEND gs_sched TO gt_sched_tmp.
ENDLOOP.
CHECK sy-subrc = 0.
CALL SCREEN '1010' STARTING AT 5 5.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
*& Module STATUS_1010 OUTPUT
text
MODULE status_1010 OUTPUT.
SET PF-STATUS 'MAIN_1010'.
SET TITLEBAR '1010' WITH gs_report-vbeln gs_report-posnr.
ENDMODULE. " STATUS_1010 OUTPUT
*& Module USER_COMMAND_1010 INPUT
text
MODULE user_command_1010 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1010 INPUTHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
Report Document not show on Crystal Report Viewer in C#
My program is modified from VB.NET. Now I struck with Crystal Report that Crystal Report Viewer didn't show Report Document.
Printing code is composed of two forms. One assign parameters and objects need. Other is Crystal Report Viewer form, CrystalReportForm. Last one run report by parameter from the first.
When run this code that it didn't found any error but the problem is no report show on Crystal Report Viewer on second form. It just blank Crystal Report Viewer. There arm't any message response.
Here is my code.
// report caller form.
private void Print()
CrystalReportForm rptForm = new CrystalReportForm();
string[] strtbl;
strtbl = new string[1];
string[] strqry;
strqry = new string[1];
// prepare var
string myqry;
string myrpt;
// Pass The Table That you used in the crystal Report
strtbl[0] = "r_receipts";
// Pass the Query
myqry = "SELECT * FROM r_receipts";
myrpt = "rptReceipts.rpt";
strqry[0] = myqry;
//Pass For Mdi True
rptForm.MdiParent = this.ParentForm;
rptForm.ViewReport(myrpt, strtbl, strqry, "");
//Parameter Value It is Optional
rptForm.Show();
// Crytal Report Viewer form.
public void ViewReport(string ReportName , string[] TableName, string[] QueryString , string Parameter = "")
//Me.MdiParent = mainpage;
if (TableName.Length != QueryString.Length )
MessageBox.Show("Passed Variable Are Not Correct", "Message", MessageBoxButtons.OK, MessageBoxIcon.Information);
return;
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
CrystalDecisions.Windows.Forms.CrystalReportViewer crv = new CrystalDecisions.Windows.Forms.CrystalReportViewer();
crv.ActiveViewIndex = 0;
crv.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
crv.ToolPanelView = CrystalDecisions.Windows.Forms.ToolPanelViewType.None;
crv.Dock = System.Windows.Forms.DockStyle.Fill;
crv.Location = new System.Drawing.Point(0, 0);
crv.Name = "CrystalReportViewer";
MySqlDataAdapter at =new MySqlDataAdapter();
DataSet ds = new DataSet();
for (int i = 0; i < TableName.Length; i++)
at = GetDataAdeptor(QueryString[i]);
at.Fill(ds, TableName[i]);
string rptPath = "";
rptPath = Application.StartupPath + "\\" + ReportName;
rpt.Load(rptPath);
rpt.SetDataSource(ds);
if (Parameter != "")
rpt.SetParameterValue(0, Parameter);
crv.ReportSource = rpt;
crv.Refresh();
//CrystalReportViewer.DataBind();
//Me.Panel1.Controls.Add(CrystalReportViewer);
Panel panel1 = new Panel();
panel1.Controls.Add(crv);Hi Bhushan,
It's not yet fixed. My dataset (ds) can't bine to DataGridView as
DataGridView1.DataSource = ds
But it could do like this
DataGridView1.DataSource = ds.Tables[0];
When I bine to Crystal Report Viewer setdatasource
CrystalReportViewer1.setdatasource = ds.Tables[0];
It still not work, anyway you suggest let me in the right way. I very confuse the thing I fix to bine to DataGridView
Thank,
Chaiwat -
Excel Named Items not showing up in Browser View Options list
Hi,
Using excel 2013 - when I create named ranges under the 'formulas' tab, I expect to see them show up in the 'show' tab under Browser View options. However they aren't there - when I look at the 'items in the workbook' list I only see the charts and
pivot tables in my workbook, not the named items.
Is there some setting I need to flip on to see these times (and then use them in sharepoint)?
ThanksToday, I tried it again and now I could see the Name range under Browser View Options list, this is my step as below:
1. Type the value in Cell A1 to B4. (Same as the screenshot as the last reply)
2. Directly type Test in Name Box.
3. Go to File > Info > Browser View options > Items in the Workbook.
Now the Name is appearing.
But when we define a name to a blank range, we would not see the Name in the Browser View options anymore. Try in your site.
By the way, My using version is Office 36 ProPlus, version 15.0.4551.1005.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected] -
Songs not showing up in list view
I recently discovered that if I display my library under the list view some of the artists are not showing up. If I change the view to the one with all the album covers it is there. Also, if I am in list view and search for the missing artist it displays everything and plays fine. Anyone know what gives?
Have you tried trashing your preferences?
Faults like this can sometimes be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
It's worth a try otherwise, there is some conflict.
I suggest you create a new user account on the problem machine and see whether FCP X works OK from there.
What codec is the problem clip?
Andy
Message was edited by: andynick
Maybe you are looking for
-
Oracle Soa Suite (11.1.1.4.0) Weblogic (10.3.4). Operating System : Red Hat Linux 5.5 I have installed and configured Oracle Soa Suite (11.1.1.4.0) with 1 Admin Server(host1) and 2 Managed Severs (host1,host2). Deployed wsm-pm (cluster), wsm*.*.seedp
-
Hacking into the form values file to retrieve a post after closing a window
Okay, I'd just finished editing and re-editing a very long post and was doublechecking some of the links when I inadvertedly closed the entire window instead of merely closing the tabbed page I'd brought the new link up on to test it. I poked around
-
Hi, I have defined a datasource in data-sources.xml file. If I do not specify the following parameters: max-connections min-connections then what are the default values the OC4J container takes? Secondly, on what basis are these values defined. I mea
-
Hello, Can someone explain to me how the account determination in SRM works? I have a thorough understanding of MM. I would like to know what the possibilities are when configuring account determination (classic scenario). Thank you & Kind regards, D
-
Urgent : Oracle Reports Server 9.0.4.0.0 Japanese fonts
Hi, I have one problem in displaying Japanese fonts in Reports Server. I have installed Oracle Reports Server (9.0.4.0.0) by selecting radio button - ' Use Unicode (UTF8) as the Character Set' while installing Infrastructure. But I didn't choose any