Cognos iView Name Property not changing

Hello,
I have some Cognos iViews that was imported into the portal.  These iViews are pretty much similar to other SAP iViews with the addition of some CPS properties which is Cognos specific.  I'm able to change the name of the iView but the change did not apply to the PCD object or at run time.  The Name property shows the changed name but just didn't apply.
Upon looking into this further and wondering where the default name is coming from, it seem to be set at the ID level.  I went to change the ID and seen the property where you change the object name but it's greyed out.  I believe that's because the SAP Portal version that we're on.  So, I'm unable to change this property.
First off, is there a way to override the defualt property object name setting?
Secondly, if no to the first question, is there a way to activate the object name setting so it can be changed?

Thank you very much for that suggestion.  That process worked!
I did have to export the role in the PCD to XML and then edit the instance of the iView's name to be a space.  I was then able to re-import the role with out any problem. 
If anyone else runs in to this, make sure that you set all properties on the object you need to re-name <u>before</u> you export it.  Otherwise as soon as you open the object you'll get the same error.
Next I am going to create a ticket with SAP about this problem.  I can see why they would not want to allow a null value in a property but they should allow a space.
Thanks again,
Steve

Similar Messages

  • The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

    I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
    I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
    I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

    I "think" the trick was unbinding and rebinding the computer account.
    After unencrypting and trying to reencrypt Filevault would still not take the new password.
    Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
    Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

  • HT4236 edited event name will not change on iPad

    I edited the spelling of an event name in my Iphoto App., but it will not change  after syncing with my Ipad.
    I tried deselecting the event and then sync the Ipad to delete the event on the Ipad. Then I selected the
    edited event and then synced the Ipad again. But the spelling of the event name did not change.
    Any Ideas?

    Oh yeah I have synched several times. I have PC with VISTA.  I think it has something to do with some titles being READ ONLY or something like that.  I need to find how to make them writeable.  No changes work on about 20 titles, the artist name? Genre? NOTHING will sync.  After sync all changes work fine accept for that 20 or so. titles just won't budge. every time.  If I go look on I tunes my changes are still there, just don't sync to Itouch.  It not the end of world but the more I upload the more I come across this.  I have about 900 full albums and maybe 20 is all that's doing it.   

  • Ipod name is not changing

    Hi,
    I recently have been having problems with my new Nano. I had a ipod for about two days now and my brother decided to make it his with out asking. I was able to change the music but the name is not changing. It still says his name. I have tryed clicking on the name and changeing it. That works for as long as my ipod is connected on my computer. When i plug it back in it says his name again now it freezes and wants to shut down.
    Is there any way to fix this? Thanks.
    <SCRIPT type=text/javascript>_popupControl();</SCRIPT>

    Sounds like you're on auto-sync and with disk mode DISABLED. What you need to do is enable disk mode so that your Nano doesn't automatically disengage from iTunes until you tell it to.
    To enable disk mode, connect your Nano to iTunes and as soon as it shows up you need to select the disk mode option on the Summary page that shows up, then click the Apply button. Do this quickly, before the auto-sync process completes, and don't forget to click Apply!
    Once disk mode is enabled you should be able to change the Nano's name. When that's done you'll need to eject it from iTunes and the name should remain changed. Note that disk mode requires you to manually eject the Nano from iTunes each time, so if you don't want that you can disable this feature once you change the Nano's name.
    The alternative to all this is to restore your iPod, which erases its contents and prompts you for a new name for the iPod. But the approach above is better if you don't want to have to re-load the Nano's contents.

  • Problem importing to mp3_ file name will not change

    I have experienced this problem multiple times before and still can't find the solution.
    Every-time I Import a Cd to "MP3" a weird file name is created. When I located the mp3 after import then try to rename it. I notice that the weird file name is still saved and appears always on top of the player (quicktime)
    how do i fix this bug?

    Steve--
    Do you have the "save as a copy" checkbox checked in your "save as" dialog box? If that is checked, you save a file with the new name and keep your working filename the same. If it is not checked, you save a file with the new name and the open document filename does not change.
    If you're talking about changing the name of the file in the finder after the save, you're right. The open Photoshop document will not know that the filename has changed since the save. If you hit save, it will create a new file with the old name.

  • Iview height is not changing

    Hi Experts,
    I have a problem in fixing the iview heights
    I have 4 iviews in a page and I am using 2 columns page layout.
    Each column contains two iviews.
    First column first iview and second column first iview are in same alignment.
    Now I want to align the other two iviews. 
    for this I used fixed type for the top iviews in both columns, but they are not working
    Any sugesstons would be appreciated.
    Raghu

    Hi Sandeep,
    How ru?
    The problem is not solved , we just came to a conclude.
    The iview I mentioned is a copy of tool area iview in the portal masthead. I am using this iview at some other place in my portal.
    I am able to change the iview height for all the iviews except this iview.
    May be it is a standard iview and that is the reason why it is not changing.
    Appreaciate your input on this. Thank you
    Raghu

  • Content Type name is not changing on site level

    Hello
    I have one new SP2010 site. I am changing the content type name using following script, but it is not working. I have not used content type in any list or library nor in any existing ite, I am not using content type hub. Can anyone why content name is not
    updating?
    $ParentContentType = $site.RootWeb.AvailableContentTypes["Data control1"]
    if ($ParentContentType -eq $null)
    write-host "not exist"
    else
    $web.$ParentContentType.Name="Data 123Control1"
    $web.AllowUnsafeUpdates = $true;
    $web.Update()
    $web.AllowUnsafeUpdates = $false;

    Make the following change, hope this helps you
    $site.RootWeb.AvailableContentTypes
    to
    $site.RootWeb.ContentTypes
    Ashish Kanoongo, MCP, MCSD, MCTS http://akanoongo.blogspot.in/

  • ARTIST name will not change on Itouch?

    Can someone tell me why SOME artist changes made on Itunes do not change on my Itouch? <but most do just some don't>?

    Oh yeah I have synched several times. I have PC with VISTA.  I think it has something to do with some titles being READ ONLY or something like that.  I need to find how to make them writeable.  No changes work on about 20 titles, the artist name? Genre? NOTHING will sync.  After sync all changes work fine accept for that 20 or so. titles just won't budge. every time.  If I go look on I tunes my changes are still there, just don't sync to Itouch.  It not the end of world but the more I upload the more I come across this.  I have about 900 full albums and maybe 20 is all that's doing it.   

  • Sometimes album name will not change...

    Sometimes when I am trying to change and album name (and I have say 10 albums) it will not change, remains "My Albums 6" ???

    I tried that, and a couple other click here, click there... nothing? I had done about 5 successfully. Then would have to try over and over for the next few, and finally they changed too. Now I am still left with the last 2 albums... still saying, ablum#...:( I donno, gonna give up for now I guess.

  • BBM display name are not changing

    Hi, I'm using blackberry Q10 and the BBM display name of my contacts are not changing whatever it says in the updates that they change their name but in contacts list and chat list it still the same! This problem have been appeared since 10 days ago
    Solved!
    Go to Solution.

    nawara-sh wrote:
    I found that this is only happen with one contact which the most one I talk with!!
    But I have my device from 3 months ago,, it's not new any more
    So when did the last update come in?
    If my post has helped you, give it a LIKE

  • Portlet title and name do not change

    Hi
    We changed the portlet title and portlet name in provider.xml file. After the portlet repository has been refreshed we could see the changes in the repository. But on the pages where the portlets already exists it does not show the change. If we reate a new instance of the portlet to a page, the new name is reflected.Restarting the apache( and jserv) did not make any difference. Any more changes or refresh we need to carry out?.
    In case it helps
    There are 2 tables called WWPOB_PORTLET_INSTANCE$, WWPOB_PORTLET_INSTANCE_FLAT$. Each of these tables has a name column that does not appear to reflect the new name of the portlet for the records that existed before the provider.xml changed.
    Thanks
    Raja

    Raja,
    Please post this question to the PDK Forum.
    Thanks,
    Jerry

  • Gateway server-name will not change

    I have changed the name of my domain on a shared server at a
    web host.
    When a swf calls the Flash Remoting gateway, CF provides the
    path to the cfc required.
    After changing the domain name everything works correctly
    except CF still provides the old domain name to the remoting
    gateway.
    I presume this happens in
    CFusionMX7/wwwroot/WEB-INF/flex/services-config.xml where the
    gateway is defined and the domain name gets bound to {server.name}.
    Does anyone know where this name comes from and how to force
    CF to reset it?
    Doug

    Problem solved. It required the web host to restart the CF
    service so that the new domain name was picked up from the web
    server.
    Doug

  • ContainerContentChanging Event Phase property not changing

    Using a ListView on WinRT WP8.1 app:
    I'm trying to use ContainerContentChanging event on a ListView as so -
        private void ListOnContainerContentChanging(ListViewBase sender, ContainerContentChangingEventArgs args)
                var viewer = args.ItemContainer.ContentTemplateRoot as View;
                if (viewer == null)
                    return;
                if (args.InRecycleQueue)
                    viewer.ClearData();
                else if (args.Phase == 0)
                    viewer.ShowPlaceholder(args.Item as ViewModel);
                    args.RegisterUpdateCallback(this.ContainerContentChangingDelegate);
                else if (args.Phase == 1)
                    // Load
                    args.RegisterUpdateCallback(this.ContainerContentChangingDelegate);
                else if (args.Phase == 2)
                    // Load more
                    args.RegisterUpdateCallback(this.ContainerContentChangingDelegate);
                else if (args.Phase == 3)
                    // Show images
                args.Handled = true;
    The issue I'm having is Phase property on the ContainerContentChangingEventArgs is always 0 when scrolling to view more items.
    (All works correctly for the items loaded in the initial view - it's only when I start scrolling that no items get updated past their placeholder.
    Any ideas why Phase property would not be updating?

    Hi BradStevenson,
    Move to Windows Phone forum for a better support.
    RegisterUpdateCallback(TypedEventHandler(ListViewBase, ContainerContentChangingEventArgs)) will help you get into other phrase number other than 0.
    Base on the blog:
    http://blogs.msdn.com/b/hanxia/archive/2013/11/04/incremental-update-item-data-for-listviewbased-controls-in-windows-8-1.aspx we need to call RegisterUpdateCallback function to enter the next phase after your finished the content displaying in the current
    phase.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • IView name change

    Hello,
    I need to change the name of the link displaying under a menu.
    If I select this link it will call Transactional Iview.
    If I change the IView name does it change the link as well? I tried this but it's not working for me.
    Please help me in this?
    Thanks,
    Sarada

    Hi,
    Changing an iview name does not affects anything, even though it is a transaction iview, you can very well change the name and still it will work fine as in transaction iview it asks you for an alias and the T-code, so this controls the link and not the iview name. When you did this, did you get any error? or what was the problem you faced?
    Regards,
    Ameya

  • File name doesn't change in Quicktime or iTunes even though i changed it in Finder

    I've have been trying to change the name of a video file (.MP4). I change the file name in the finder and it stays that way. However when i open the file in quicktime the name has not changed in the title bar. Also if i move the file to iTunes, I have it setup to copy and organize my files that i add, it changes it back to the old file name. I have all copies of the file closed. Both Quicktime and iTunes are closed. Please help me fix this. Thank you.

    You need to use a program such as VLC or Flip4Mac to play them or Switch to convert them. Just changing a file's extension doesn't change its format.
    (109393)

Maybe you are looking for