Cogs of death

Hi, before I subject myself the the pains that are the helplines...can anyone help?
On powering up my Vision box I get a single cog on the screen with a black line underneath. The line slowly turns grey and when completely grey the screen flickers and this time three are two cogs and the black line. This time the black line stays black...the screen flickers again, the two cogs and the black line disappear to be replaced by a rather ominous looking big red cross.
It's seems to me that it's going through some sort of 're-set' routine, but appears to fail. The normal blue light on the front of the box is green all through this process.
Anyone had this before and what was the resolution?
Thanks
Andy
Solved!
Go to Solution.

Known as the red cross of doom, sadly.
It means that the box failed to get an update applied and it is in a corrupt state.
The only possible solution is a full factory reset which if successful will leave you with the box in the state it was delivered but with new software. It will however wipe all your recordings.
Factory Reset
Switch off the Vision+ box at the mains socket
Hold down the front panel OK and down arrow buttons
Switch on the power to the Vision+ box
Allow the box to start up (about 15 seconds)
Release the OK and down arrow buttons
The Vision+ box will then contact the servers to get a new copy of its firmware
This will take around 30 minutes
If this doesn't work I'm afraid your box will need replaced, you can either contact the Mods or phone the helpline
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Similar Messages

BT Vision host of problems

Last week my old silver box died, due to me not being at home during the day I changed my package to ESPN to receive a new box thinking this would be the simplest option.
It hasn't been!
Box is a nightmare, I've scanned for channels twice a day since putting it in, every evening from 10pm it starts to say freeview signal is too week. I've moved room around so it plugs into main socket. no improvement.
cuts out on iplayer after 20 mins and the box makes a clicking noise.
whats the cancellation fee? I want out. I hate the phoneline customer service and the thought of having to phone makes me stressed. I can't be in too let an engineer in.
HELP

vegasvoss wrote:
and now I've just switched it on to a big red cross in middle of screen
Ah, this means your very old box has now died. Sometimes you can get it rebooted, most times you can't. I've been through this myself too.
You need to read this old thread -
http://community.bt.com/t5/BT-Vision/cogs-of-death/m-p/310005#M23308
Hope you get it sorted.
Rank - Mostly Harmless.

Red Cross with 2 dots underneath

Have had the Black vision box for a while now and all has been fine, but all of a sudden one day , the red cross with 2 dots have come up, so anyone know how to get it back to normal? i have tried turning it off by the switch and holding the Ok button and down button at the same time i switch it on but then these cogs come up and then they load and take me right back to the red cross again! so how do i fix it?

Did a search on te forums for red dot : Re: cogs of death
Options
on 19-10-2011 19h14
Known as the red cross of doom, sadly.
It means that the box failed to get an update applied and it is in a corrupt state.
The only possible solution is a full factory reset which if successful will leave you with the box in the state it was delivered but with new software. It will however wipe all your recordings.
Factory Reset
Switch off the Vision+ box at the mains socket
Hold down the front panel OK and down arrow buttons
Switch on the power to the Vision+ box
Allow the box to start up (about 15 seconds)
Release the OK and down arrow buttons
The Vision+ box will then contact the servers to get a new copy of its firmware
This will take around 30 minutes
If this doesn't work I'm afraid your box will need replaced, you can either contact the Mods or phone the helpline
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’
Contact the Moderators
http://www.btlife.bt.com/
http://kafkasworld.com/
My Radio Station
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

COGS update on other GL Account at the time of Free goods or Sample goods

Hello,
In sales process, Usually the at the time of Delivery, material document is created as
DR COGS
CR INVENTORY
But in the case of free goods or bonus goods or samples: the account should not determines COGS instead it should determine another GL Account called as Free good -COGS expense A/c.
How can we solve the issue.
Regards,
SK

Hi Yasar,
You need to create a new routine for calculate type.
Do as below:
1. Go to VOFM>Formulas>calc.rule Rebate InKd to create a new routine for calculate type. for example 601.
2. add the following code in this routine 601 and then save.
USING L_FRM STRUCTURE KONDN_FRM.
DATA: VORKOMMA LIKE KONDN-KNRMM,
NACHKOMMA LIKE KONDN-KNRMM.
L_FRM-NRMENGE = 0.
L_FRM-NRRUND = 0.
L_FRM-NRMENGE = ( L_FRM-MGLME / L_FRM-KNRNM * L_FRM-KNRZM ).
business rounding
VORKOMMA = FLOOR( L_FRM-NRMENGE ).
L_FRM-NRRUND = L_FRM-NRMENGE - VORKOMMA.
L_FRM-NRMENGE = VORKOMMA.
3. Select routine 601 in field "Calc.Rule" when you create free goods condition record.
Hope it helps.

Error 13 = Blue Screen of Death?

Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther.
I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load a demo version of Adobe Illustrator CS2.
Over the last day I have tried the following:
* deleted the apple.com.print preferences
* reset the PRAM
* unplugged, unpowered and restarted the printers and their USB connections
* deleted the printers from the print setup utility and tried to reinstall them (but there too I get the 'error 13' message. Printers won't load but they do show up as if they loaded. Just won't work, that's all.
* tried logging in as a new user, and then the printer message is "Not enough RAM" to print.
* repaired the disk permissions from the CD
Generally I've done everything I can think of... except to reload the OS, which I hesitate to do because I have to first load Jaguar, then the Panther update, then the other updates. Last time I tried that things didn't quite work out.
I do have an external backup drive, which also got corrupted as I tried loading the Adobe Illustrator CS2 on that disk too. Dumb I know...
So... anyone know what 'error 13' means?
Is 'error 13' the Mac equivalent of the Windows Blue Screen of Death?
Thanks for any input...

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

Ipod crashes windows (blue screen of death)

Hi all. A bit of background info:
A couple of months ago the hard drive crashed on my friends computer. They had to reinstall their OS. Thankfully they had made backups of most everything and were able to get most things reinstalled successfully.
Now they are using a 15g ipod connected through a firewire port on an HP laptop. They do not have a USB adaptor, so gotta go with the FW.
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
I know this is vague information, but any pointers on how to proceed in troubleshooting this would be greatly appreciated, thanks
Frost

hi Frostine!
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
we can sometimes narrow this down a bit by checking on the numerical and text codes showing up with the blue screen. (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm checking on:
Troubleshooting Windows Stop Messages
can you get that information for us from their PC?
(if the screen is specifying the file that Windows is crashing on, that would be helpful to know too.)
love, b

Windows Vista Crashing When Ipod is Plugged In. Blue Screen of Death?

A week ago, my computer suddenly started to reboot whenever I plugged my 5th generation 80 gig Ipod in to sync. A blue screen will pop up, and automatically restart.
I do not believe this is the blue screen of death that appeared 2 months ago. I have upgraded to Itunes 8.0.1 when it was first released, and I had no problems until a week ago. I haven't heard of anyone receiving the blue screen of death since the update to Itunes 8 was released.
I have also lost all of my music from my Ipod, so I am anxious to figure this out.
Here is what the blue screen (certain passages paraphrased, the specifics were copied directly):
A problem has been detected and windows has shut down to prevent damage to your computer.
BADPOOLHEADER
If this is the firs time you've seen this stop error screen, restart yoru computer. If this screen appears again, follow these steps:
Make sure all hardware and software is properly installed
If it continues, disable/remove any newly installed hardware and software. Disable BIOS memory options such as caching or shawoding. If you need to use safe mode to remove or disable components, restart your computer, press F8 for Advanced Sartup options, then select safe mode.
Technical information:
*STOR: 0x00000019 (0x00000020, 0xB7C4CE50, 0Xb7C4CE68, 0x0A030203)
/end blue screen
Any help you have would be greatly appreciated!

Have you tried the troubleshooting advice in this article?
http://support.apple.com/kb/TS1502
Was a file name mentioned in the stop message? usually something.sys That can be a clue to the problem is the Apple advice doesn't help.

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue Screen of death - now can't load Windows (even in safe mode)

Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
I looked at the log it produces but it passes all the individual tests.
I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
(there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
Thanks
James

Normaly the reinstall data is on a separate part on your HD, not in Windows.
The register is only used for Windows.
If it doesn't work you can always try to reinstall from a DVD later.
It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

Blue screen of death when connecting ipod or running itunes

Please help me, I get the blue screen of death and its down to my itunes/ipod i think.
Uninstalled Itunes (tried doing this in safe mode but it wouldnt let me saying you cant do this) and re-installed it but when try to use it (ipod not connected) my screen either freezes a few moments later or the BSOD appears.
Ive ran a windows disk check and a system mechanic 7 one as well, a few folk on here have said my ipod might need reset but this is happening without the Ipod connected so is still an issue?
My ipod seems to be working fine, obviously i cant even access itunes to reset it or see its status.
Any help would be greatly appreciated.

Have you tried this?
http://support.apple.com/kb/TS2280
CG

Blue screen of death on Toshiba P755-S5375 with ADOBE ENCORE CS6

I recently purchased a new laptop and installed Adobe Master Collection CS6. I purchased the laptop for video capture and editing, as well as for blu-ray authoring.
Unfortunately, although the computer and software works fine for video capture and editing, I am unable to author a blu-ray. For authoring, I am using Adobe’s Encore CS6. After checking and previewing my creation, I attempt to build to disc using Encore. About 2 seconds after clicking the build disc in Encore, I get the “blue screen of death” (BSOD). This happens every time I try to build to blu-ray (only blu-ray has this issue; I am able to build to a DVD). I am using an external blu-ray drive on USB 3.0.
I am using Encore version 6.0.0.492
Here are the blu-ray drive specs:
Logitec USB 2.0/3.0 Bus powered portable bluray drive unit, LBD-PME6U3VBK
PIONEER BD-RW BDR-TD05 USB Device
Driver: 6.1.7601.17514
C:\windows\system32\DRIVERS\cdrom.sys
\windows\system32\Drivers\PXHlpa64.sys
\windows\system32\DRIVERS\tdcmdpst.sys
\windows\SysWOW64\drivers\Afc.sys
Renesas USB 3.0 driver also installed
The computer specs are as follows:
Manufacturer: Toshiba
Manufacturer Part Number: PSAY1U-05U027
Product Line: Satellite
Product Series: P755
Product Model: P755-S5375
Product Name: Satellite P755-S5375 Notebook
Product Type: Notebook
Processor Manufacturer: Intel
Processor Type: Core i7
Processor Model: i7-2670QM
Processor Speed: 2.20 GHz
Processor Core: Quad-core (4 Core)
Cache: 6 MB
Chipset Manufacturer: Intel
Chipset Model: HM65 Express
Standard Memory: 4 GB
Memory Technology: DDR3 SDRAM
Memory Standard: DDR3-1333/PC3-10600
Number of Total Memory Slots: 2
Hard Drive Capacity: 500 GB
Screen Size: 15.6"
Display Screen Type: Active Matrix TFT Color LCD
Aspect Ratio: 16:9
Screen Mode: WXGA
Backlight Technology: LED
Screen Resolution: 1366 x 768
Graphics Controller Manufacturer: Intel
Graphics Controller Model: HD 3000
Graphics Memory Capacity: 1.65 GB
Graphics Memory Accessibility: Shared
Ethernet Technology: Fast Ethernet
Wi-Fi: Yes
Wi-Fi Standard: IEEE 802.11b/g/n
Webcam: Yes
Operating System: Genuine Windows 7 Home Premium with SP1
Operating System Architecture: 64-bit
Pointing Device Type: TouchPad
Number of Cells: 6-cell
Battery Chemistry: Lithium Ion (Li-Ion)
Width: 15.0"
Depth: 9.8"
Weight (Approximate): 5.40 lb
Package Contents:
Satellite P755-S5375 Notebook
Lithium Ion Battery
AC Adapter
Green Compliant: Yes
Green Compliance Certificate/Authority: RoHS
Installed programs:
Name                                                            Version
Microsoft Application Error Reporting                           12.0.6015.5000
Microsoft Office Click-to-Run 2010                              14.0.4763.1000
Microsoft Office 2010                                           14.0.4763.1000
Windows Live Essentials                                         15.4.3502.0922
Apple Application Support                                       2.1.7
Windows Live Writer                                             15.4.3502.0922
Microsoft_VC90_MFCLOC_x86                                       1.00.0000
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148 9.0.30729.4148
TOSHIBA Web Camera Application                                  2.0.3.3
Windows Live Messenger                                          15.4.3538.0513
Microsoft_VC90_CRT_x86                                          1.00.0000
Google Toolbar for Internet Explorer                            1.0.0
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219     10.0.40219
Microsoft Visual C++ 2005 Redistributable (x64)                 8.0.61000
Microsoft SQL Server 2005 Compact Edition [ENU]                 3.1.0000
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219     10.0.40219
Toshiba Online Backup                                           2.0.0.31
TOSHIBA ReelTime                                                1.7.21.64
Windows Live Remote Client Resources                            15.4.5722.2
Windows Live SOXE Definitions                                   15.4.3502.0922
Adobe AIR                                                       3.1.0.4880
Windows Live Mesh ActiveX Control for Remote Connections        15.4.5722.2
Windows Live Communications Platform                            15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
Apple Software Update                                           2.1.3.127
Windows Live UX Platform Language Pack                          15.4.3508.1109
Windows Live Photo Gallery                                      15.4.3502.0922
bl                                                              1.0.0
Windows Live Mail                                               15.4.3502.0922
Java(TM) 6 Update 25                                            6.0.250
MSVCRT_amd64                                                    15.4.2862.0708
TOSHIBA Face Recognition                                        3.1.17.64
ph                                                              1.0.0
Adobe Widget Browser                                            2.0.348
Windows Live Writer                                            15.4.3502.0922
Mesh Runtime                                                    15.4.5722.2
TOSHIBA Supervisor Password                                     1.63.51.2C
Adobe Acrobat X Pro - English, Fran軋is, Deutsch                10.1.1
Adobe Reader X MUI                                              10.0.0
TOSHIBA Media Controller Plug-in                                1.0.7.5
Windows Live Photo Gallery                                      15.4.3502.0922
Windows Live Photo Common                                       15.4.3502.0922
Label@Once 1.0                                                  1.0
PDF Settings CS6                                                11.0
Toshiba Book Place                                              2.2.7530
Windows Live PIMT Platform                                      15.4.3508.1109
TOSHIBA Wireless LAN Indicator                                  1.0.5
D3DX10                                                          15.4.2368.0902
Utility Common Driver                                           1.0.52.3C
Junk Mail filter update                                         15.4.3502.0922
Windows Live Movie Maker                                        15.4.3502.0922
TOSHIBA HDD/SSD Alert                                           3.1.64.9
Windows Live Remote Service                                     15.4.5722.2
Toshiba App Place                                               1.0.6.3
Windows Live Mesh                                               15.4.3502.0922
Windows Live Language Selector                                  15.4.3538.0513
QuickTime                                                       7.72.80.56
Renesas Electronics USB 3.0 Host Controller Driver              2.0.34.0
TOSHIBA Value Added Package                                     1.6.1.64
Microsoft_VC80_CRT_x86                                          8.0.50727.4053
Google Update Helper                                            1.3.21.111
TOSHIBA HDD Protection                                          2.2.2.15
7-Zip 9.20 (x64 edition)                                        9.20.00.0
TOSHIBA PC Health Monitor                                       1.7.9.64
Windows Live Mail                                               15.4.3502.0922
Adobe Help Manager                                              4.0.244
MSVCRT                                                          15.4.2862.0708
Windows Live Remote Client                                      15.4.5722.2
Blackmagic ATEM Switchers                                       3.0.1.0
Microsoft_VC90_MFC_x86                                          1.00.0000
Windows Live Photo Common                                       15.4.3502.0922
Windows Live ID Sign-in Assistant                               7.250.4232.0
Microsoft Visual C++ 2005 Redistributable                       8.0.61001
Windows Live Messenger                                          15.4.3538.0513
Windows Live Mesh                                               15.4.3502.0922
Windows Live Writer                                             15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148 9.0.30729.4148
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17    9.0.30729
TOSHIBA Hardware Setup                                          1.63.1.37C
Microsoft Silverlight                                           4.0.50401.0
PlayReady PC Runtime x86                                        1.3.0
Intel(R) WiDi                                                   2.1.41.0
Windows Live MIME IFilter                                       15.4.3502.0922
TOSHIBA Flash Cards Support Utility                             1.63.0.12C
TOSHIBA eco Utility                                             1.3.5.64
Windows Live UX Platform                                        15.4.3502.0922
TOSHIBA Wireless Display Monitor                                1.0.1
Debugging Tools for Windows (x64)                               6.12.2.633
Windows Live Remote Service Resources                           15.4.5722.2
Windows Live Writer Resources                                   15.4.3502.0922
Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17    9.0.30729
Intel(R) PROSet/Wireless WiFi Software                          14.01.1000
Windows Live Installer                                          15.4.3502.0922
TOSHIBA Disc Creator                                            2.1.0.11 for x64
PlayReady PC Runtime amd64                                      1.3.0
Windows Live SOXE                                               15.4.3502.0922
Java Auto Updater                                               2.0.4.1
TOSHIBA Bulletin Board                                          1.6.08.64
Crash details:
Problem signature:
Problem Event Name:            BlueScreen
OS Version:                           6.1.7601.2.1.0.768.3
Locale ID:                              1041
Additional information about the problem:
BCCode:                               d1
BCP1:                                   0000000000000001
BCP2:                                   0000000000000002
BCP3:                                   0000000000000008
BCP4:                                   0000000000000001
OS Version:                           6_1_7601
Service Pack:                        1_0
Product:                                768_1
Files that help describe the problem:
C:\Windows\Minidump\090312-28516-01.dmp
C:\Users\xxx\AppData\Local\Temp\WER-62696-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
DMP file details
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Machine Name:
Kernel base = 0xfffff800`02e04000 PsLoadedModuleList = 0xfffff800`03048670
Debug session time: Mon Sep 3 02:27:16.190 2012 (UTC + 9:00)
System Uptime: 0 days 0:06:50.096
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck D1, {1, 2, 8, 1}
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000001, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: 0000000000000001, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030b2100
0000000000000001
CURRENT_IRQL: 2
FAULTING_IP:
+6130613031313361
00000000`00000001 ??              ???
PROCESS_NAME: System
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: fffff80000b9c740 -- (.trap 0xfffff80000b9c740)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff80000b9c801 rbx=0000000000000000 rcx=fffffa8004586618
rdx=fffff80000b9c8d8 rsi=0000000000000000 rdi=0000000000000000
rip=0000000000000001 rsp=fffff80000b9c8d0 rbp=0000892fc0ba4327
r8=fffff80000b9c8d0 r9=0000000000000000 r10=0000000004216094
r11=000000005e040600 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
00000000`00000001 ??              ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002e82769 to fffff80002e831c0
FAILED_INSTRUCTION_ADDRESS:
+6130613031313361
00000000`00000001 ??              ???
STACK_TEXT:
fffff800`00b9c5f8 fffff800`02e82769 : 00000000`0000000a 00000000`00000001 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff800`00b9c600 fffff800`02e813e0 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`00b9c740 00000000`00000001 : 00000000`00000000 00000000`5e040600 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff800`00b9c8d0 00000000`00000000 : 00000000`5e040600 00000000`00000000 00000000`00000000 00000000`080e8118 : 0x1
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+260
fffff800`02e813e0 440f20c0        mov     rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+260
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 4fa390f3
FAILURE_BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
BUCKET_ID: X64_0xD1_CODE_AV_BAD_IP_nt!KiPageFault+260
Followup: MachineOwner

Satellite A215-S7422
We need to know the Stop code on the blue screen. If there is a file name mentioned, we want that too.
You can prevent the rapid disappearance of the blue screen during a normal boot by choosing this at the F8 Startup menu.
   Disable automatic restart on system failure
-Jerry

Mac Book Pro constantly displays spinning wheel of death HELP!!!

My Mac Book Pro (after installing Mavericks) displays the spinning wheel of death multiple times per day. I thought it was my Google Chrome, but now it has been happening no matter what application I am using. I used Etrecheck to see what is going on with my computer, but I don't actually know what the output means. I've copied the information below.
More information: I no longer have a Blackberry, but I don't know how to remove any software that may still be on my computer (since I see Blackberry listed under Kernel Extensions). I also backed up my harddrive on the 28th, just to be safe.
I would greatly appreciate any and all help with this. I'm in the process of trying to study for mulitple teacher certification exams, so this is the worst possible time for tmy computer to suddenly go haywire. Thank you so much to anyone who takes the time to help!
Hardware Information:
          MacBook Pro (13-inch, Mid 2010)
          MacBook Pro - model: MacBookPro7,1
          1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 0:21:46
Disk Information:
          Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 319.21 GB (224.83 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.64) Support
          [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.64) Support
          [not loaded] com.seagate.driver.PowSecDriverCore (5.2.3 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.3 - SDK 10.4) Support
          [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.3 - SDK 10.5) Support
          [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.3 - SDK 10.4) Support
Startup Items:
          HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.cloudpath.maccmd.plist Support
          [loaded] com.google.keystone.daemon.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
          [running] com.rim.BBDaemon.plist Support
          [running] com.sophos.autoupdate.plist Support
          [running] com.sophos.intercheck.plist Support
          [running] com.sophos.notification.plist Support
          [failed] Safe.Connect.plist Support
Launch Agents:
          [loaded] com.google.keystone.agent.plist Support
          [running] com.hp.devicemonitor.plist Support
          [loaded] com.hp.messagecenter.launcher.plist Support
          [running] com.hp.productresearch.plist Support
          [running] com.rim.BBLaunchAgent.plist Support
          [running] com.sophos.uiserver.plist Support
          [running] net.culater.SIMBL.Agent.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
          [loaded] com.leadertech.PowerRegister.SEA1.83d33ce173c08a4063a3d2747cfbb0a9.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          AdobeResourceSynchronizer
          Dropbox
          HP Scheduler
          SophosUIServer
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.3.0.18358 Support
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
          NP2020Player: Version: 5.0.4.0 Support
          OfficeLiveBrowserPlugin: Version: 12.3.6 Support
          AdobePDFViewerNPAPI: Version: 10.1.9 Support
          FlashPlayer-10.6: Version: 13.0.0.206 - SDK 10.6 Support
          Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.206 - SDK 10.6 Support
          iPhotoPhotocast: Version: 7.0 - SDK 10.7
          googletalkbrowserplugin: Version: 5.3.0.18358 Support
          NP_2020Player_IKEA: Version: 5.0.7.0 Support
          AdobePDFViewer: Version: 10.1.9 Support
          CouponPrinter-FireFox_v2: Version: Version 1.1.6 Support
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.0.2 Support
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
          Picasa: Version: 1.0 Support
3rd Party Preference Panes:
          Flash Player Support
          Flip4Mac WMV Support
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 297.29 GB Disk used: 87.91 GB
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 465.44 GB
                    Total number of backups: 3
                    Oldest backup: 2013-01-14 01:49:07 +0000
                    Last backup: 2014-04-28 23:07:32 +0000
                    Size of backup disk: Adequate
                              Backup size 465.44 GB > (Disk used 87.91 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          mds
               4%          WindowServer
               1%          InterCheck
               0%          BBLaunchAgent
               0%          fontd
Top Processes by Memory:
          143 MB          Google Chrome
          139 MB          InterCheck
          106 MB          com.apple.IconServicesAgent
          74 MB          Dropbox
          66 MB          mds_stores
Virtual Memory Information:
          765 MB          Free RAM
          1.48 GB          Active RAM
          1.04 GB          Inactive RAM
          492 MB          Wired RAM
          1.05 GB          Page-ins
          0 B          Page-outs

kmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then.

Connecting HDD to Airport Extreme causes orange death light...

I am in a small office network with mix of pc and mac (7 pc's, 1 iMac, 1 wireless iMac, and 3 wireless macbook pro's). Internet connection comes into building directly to airport. Airport then feeds a couple of systems directly and a Dlink 24port ethernet switch which connects all other hardwired network connections.
I just purchased a Seagate Freeagent Desk 1.5TB external USB2 drive to be used as a network storage drive (not with time machine just grabbing and dumping files for interoffice sharing). Removed preloaded software and formatted fat32. Disk will be mounted and recognized when connected to any mac directly. When connected to the usb port on the airport extreme it begins to initialize and then bombs. Airport gives the orange death light and there is no connectivity to the router for all (ie internet connection, etc.) When you unglug the HDD the router reboots and then goes back to green light of peacefulness. What am I missing? Setting? Order of connection? Not hitting it hard enough on the ground with a large 10lb sledge hammer? Help me out...

you may need to restart the AEBSn with the drive plugged in.
since it might have been long since the AEBSn was restarted and anything else attached to it.
or a restore to factory settings...
i know not the best you want to hear, it should just work.
make sure all the AEBSn updates are there...etcetc
i was having this problem the past month or so and it started working again flawlessly after a few restarts.

COGS (Cost of the Goods Sold) in OPM reg.

Hi
Can anyone provide the details about COGS (Cost of the goods sold) documents/set up in R12.
This is very urgent.
Kindly do the needful.
Mail id : [email protected]
Regards
Raj

Hi,
1. Cost of manufacture of a Product is what the value of goods sold or Cost of Goods sold (COGS). Either, you use the SAP Costing module (CO-PC) to let SAP determine COGS or you can manullay input COGS into material master fields (Standard or Moving Average) in Accounting view of Material master. In either case, COGS is stored in the material master valuation (Accounting) view.
2. You mean in a COGS? Whatever costs it takes to manufacture a product is included in COGS, for instance Material cost, Labor cost etc.,
Hope this helps.
PS: There is lot of documentation available online SAP help protals and please refrain from using this forum for asking such basic questions and restrict to only questions of clarificatory in nature or issue based questions.
Make an effort to read the SAP help documentation for all your basic questions.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/80/ea89395eb58c4f9d0c3e837cf0909d/frameset.htm
Mods (Moderators) will lock your threads, if you continue to ask such basic questions, so no one can reply to it.
Edited by: Pradeep kumar Athmakur on Feb 27, 2010 12:41 AM

Free of Charge order: COGS (VPRS) is not transferred to CO-PA

Dear SD gurus
I have FOC order and I’d like to transfer its cost to CO-PA.
Initially, only delivery process exist, but I noticed that without
billing, data is not transferred to CO-PA.
So, we added billing process with no accounting doc.
But, condition type VPRS seems to be NOT transferred to CO-PA.
Is there any solution?
Yoshi

Have a look at this document
COGS not posted to costing based CO-PA during Goods Issue - ERP Financials - SCN Wiki
G. Lakshmipathi

Cogs of death

Similar Messages

Maybe you are looking for