Cold RESET For HP laserjet 200 color M251n

Dear Support,,
I Have joined To new Organization And I was Requested to install Hp Laserjet 200 m251n in a new remote site
when i tried to enter it is asking for Password ( Secured )
i know the saved ip Address But I Am not Able to change it
so is there any way to cold Reset Factor Setting for the Printer
thanks & Regards
Sadek

Hi @Mfsadek ,
I see by your post that you need to reset the printer.
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

Network Configuration for HP LaserJet 200 color MFP M276nw

Can the HP LaserJet 200 M276nw can be configured to scan to a network folder without initial set-up from a PC? Without the need of initially connecting the device to a computer first.
We are running a virtual environtment and the printer will need to scan to a configured network folder and this should be done via the device. Of course folder permisisons will be completed prior. I believe I saw a manual where the Embeded web server had this configuration, but would to make sure prior to committing to the purchase. Thanks in advance.
This question was solved.
View Solution.

You are gladly welcome.
Yes, the printer support the SMB protocol indeed.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

LaserJet 200 Color M251n connection to Ethernet Network Problems

I have just bought a new HP Laser Jet printer. When I ask my printer to print, it says that it is not connected. I have printed a Network Summary from the printer which says it is connected. If I unplug the Ethernet cable it does seem to print.
I use a Mac Ox 7.5 and I have an Ethernet cable connected to the router BT business hub. Any ideas.

Hi philippa64,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer isn't recognized on the wired network.
I will be happy to help you.
Was the printer configured over the wireless network also then?
Print a configuration page from the printer's control panel to get the printer's IP address.
Printing a Configuration Report.
If you have a valid IP address for the printer then try and access the embedded web server for the printer.
Type the IP address into Safari's address bar.
If it loads the printer's network page then the printer is on the network.
Power cycle the computer, printer and router.
Try adding the printer on the Mac.
Click the Apple menu and then click System Preferences.
Click Print & Scan, click the plus sign at the bottom of the left pane,
click the name of your printer, click on the add button.
Try printing again.
If the Mac isn't seeing the printer then add the printer as IP Protocal.
Go to the Apple, system preferences, print and scan, click + button,
then select the IP icon across the top, type in the printer's IP address,
select jet direct below and then apply.
Please let me know the results.
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro 200 color M251n unresponsive in Sleep Mode

Printer: HP Laserjet Pro 200 color M251n
Firmware: 2014-06-04 , Version 20140521
Problem:
Since the latest Firmware update the printer is unresponsive in Sleep/Standby Mode no Events (all configured to wake up the printer) will wake the printer up. Even to connect via Webinterfac the printer is not responding. Ping also Fails.
Tried to connect the printer to another Printer Switch Port/ wall plug changed network cables nothing worked.
The only solution is to hard reset the printer (power off/on) to get the printer working again.
Played around with the EcoSmart configuration but doesn't matter what is selected there its always the same that the printer stuck in Sleep/standby mode and won't responde.
Is there somewhere the old FIrmware to be downloaded to try a downgrade if this would help?
I really don't think there is anythink else I could try.
This question was solved.
View Solution.

we are on a comany network and I guess our network won't be the problem (cisco switches for our printer lan)
in the meantime we replaced the HP Printer with a small xerox printer as we still have warranty we might give it back to vendor.
I don't think there is any issue related with network settings if none of the wake up events are working.
Bad Firmware I would call it.

Ready 2 download error on Laserjet pro 200 color m251n printer

I have a laserjet pro 200 color m251n printer that suddenly gives "error 2 download" can anyone profer solution on how to clear this error.
I tried using the firmware downloaded from hp site but gives "Fatal erro 7 while erasing.
Please somebody help me. It's very urgent.

Hi Seun1965,
I see you are getting an "error 2 download" message and can not complete the firmware update. Please complete the steps in the following document; A 'Firmware Corrupt Ready 2 Download' Error Message Displays on the Control Panel.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c03109721.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check. Even if the printer is out of warranty I suggest still calling HP to see if there is something they can do to help.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP LaserJet 200 Color M251NW

Hey Yall, I've been searching and watching videos, but it seems like my problem is more complex than it should be.
I just purchased a LaserJet 200 Color M251nw and I use a Macbook runnining on Mavericks OSx (10.9.2)
Two-Sided Printing is why I purchased it, besides it being a good deal and having Laser Technology..
PROBLEM: I can't seem to ENABLE double-sided printing. I have installed latest drivers, and here's the kicker, there is no "driver" tab for my printer to allow me to "checkbox" Duplex Printing that I have been seeing on other support pages. The only TABS i see are the Utility and General. I've seen the Driver tab for previously owned printers but not this one.
PLEASE help!!!

Hi HDRogerMartin,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you would like to know how to set the two-sided printing.
I will be happy to help you.
This information is provided by the Manual on page 38.
LASERJET PRO 200 COLOR.
Print on both sides (Mac OS X)
1. Insert enough paper into one of the trays to accommodate the print job.
2. On the File menu, click the Print option.
3. Open the Finishing menu, and click the Manual Duplex tab or open the Manual Duplex menu.
4. Click the Manual Duplex box, and select a binding option.
5. Click the Print button. Follow the instructions in the pop-up window that appears on the computer
screen before replacing the output stack in Tray 1 for printing the second half.
6. Go to the product, and remove any blank paper that is in Tray 1.
7. Insert the printed stack face-up with the bottom edge feeding into the printer first in Tray 1.
8. If prompted, press the appropriate control-panel button to continue.
You can also set this as a preset.
Create a printing preset for Mac.
1.On the File menu, click the Print option.
2.Select the driver.
3.Select the print settings that you want to save for reuse.
4.In the Presets menu, click the Save As… option, and type a name for the preset.
5.Click the OK button.
Use printing presets
1.On the File menu, click the Print option.
2.Select the driver.
3.In the Presets menu, select the printing preset.
Hope this helps.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp Laserjet 200 Color MFP M276nw Fax error report

Hi Team
Will you please assist me in turning off , Fax error report ?
I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
faxes.
Regards
James R

Hi JamesR25,
Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
From the front panel of your LJ, please follow the path below:
Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
You should not receive anymore fax error reports.
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Laserjet 200 color

I have a Laserjet 200 Color printer. I have replaced the ink cartridges but I still get skips in the printing. There is no rhyme or reason as the area that is missing ink varies. Any suggestions to clear up the problem or do I need a new printer?

Hi @mbrooks11,
I see that you are having issues with the ink missing on the print outs. I can help you, but I will need some more information so I can provide the proper steps to try and resolve this issue.
I would suggest to run a cleaning and a calibration on the printer.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
Are you using Genuine HP Toner?
What are the toner levels?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 200 color M251nw prints, but images are blurred.

Laserjet200 (HP LaserJet 200 color M251nw) prints, but images are blurred; sometimes the entire page and other times just the right half. Staples tech said the drum could be bad. Can this be corrected? Using W7 ultimate OS.

Hi @jimmanning ,
I see by your post that the images are blurred. I would like to help you.
Run a calibration on the printer.
On the printer touch the wrench, system setup, print quality, color calibration calibrate now.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Remove the toner and check to see if there is any toner on drum.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Diagnostics Page and Print Quality Page?
Are you using Genuine HP Toner?
What are the Ink levels?
Was there any damage on the toners?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet 200 color MFP printer - one laptop can print while the other laptop at home can't.

My boyfriend and I set up the LaserJet 200 color MFP printer at home and installed the software on both our laptops. I have a Dell Inspiron 700m and he's got the Lenovo T400. I have been able to print any time from my laptop, but my boyfriend has only been able to print one document and after that there is a printer error and is not able to print nor troubleshoot. I uninstalled and re-installed the software one more time, and again, he was only able to print one document and after that, printer error again (does not specify error). Meanwhile, I continue to be able to print without a problem. Anything I may be overlooking? Any help will be appreciated.

What OS are you using?
Which of the LaserJet 200 series printers do you have? There are several in that series and I want to make sure I'm helping with the right one.
How is the printer connected to the computers?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP LaserJet 200 color MFP M276nw - cannot connect

Hello,
Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues. Then added the "device" / printer on two Windows tablets, with no issues. I was able to print from all three devices. The tablets cannot 'find' the printer.
I then added the printer to another Windows 7 system and now cannot connect from the other systems. I am still able to print from the second Windows 7 system. (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
Please advise. Should I just return the printer?

Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): xxxxxxxxx
Communication Mode: Infrastructure Authentication
Type: wpa2-psk
Encryption: tkip+aes
Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
Channel: 6
Signal Strength: Very Good
***Marked out some of the settings***

Laserjet 200 color m251 won't print in office picture manager

Windows 7 pro, service pack 1. HP laserjet 200 color m251 pcl6 will not print in office picture manager or photo viewer. will print using quick time.
any suggestions?

Hello BrokerDen.
I understand your Laserjet 200 printer is unable to print from office picture manager or photo viewer. Have you tried to uninstall and reinstall these programs to see if this resolves your issue?
Something else you can try is applying an alternate print driver that could be compatible with your programs. Please follow these instructions in this thread.
How is this printer connected? Wireless or USB.
Let me know if this resolves your issue.
Looking forward to hear from you.
I worked on behalf of HP.

Laserjet 200 color m251 install failed

I cannot get my LaserJet 200 Color M251 software to install. The first install screen gets to 100% and then instantly jumps to an Error message with no error code. I'm running Windows 7 (64bit) and successfully installed this on another computer runnning the same. I've tried restarting, checked that spooler is running and everything I can think of short of reinstalling Windows. Any help?

I'm having this same problem with the same screen popping up at 91% installation progress. I'm running Windows 8.1 64 bit. I've tried both the CD and the downloaded version with the same results. I did originally have it installed from the CD, but the printer was always indicating that it was offline, but I could print from my other laptop (Windows 7). That's when I went to HP online and used the downloaded program. When I ran it, it deleted the version I had already installed. Any help will be greatly appreciated. Thanks.

Hp laserjet pro 200 color m251n factory reset

My hp laserjet 200 M251n has stoppped working, won't print and no display in LCD panel, only power light is on.
I'd like to try a factory reset but the only option in the manual is via the menus and the "OK" button which of course is not working.
Is it possible to do a cold (factory) reset on thsi printer?
Thanks.

Hi,
Please check your inbox for the steps on how to perform the reset.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

HP laserjet pro 200 color m251n reset

Hello, I receved my HP Lasejet Pro 200 m251n yesterday and unfortunately we did not get a good start together. When printing colors, the colors are not aligned. I have printed a few diagnostic pages that just confirm the issue. Reading the forums I found that recalibrating could be helpful. Unfortuately after ~15 recalibrations nothing changed. Some users on other model are reporting that a NVRAM reset could be a solution. Unfortunately I did not find a way to do this on my M251n. Can it be done ? Should I try it ? Or should I send the printer back ?
Thank you.

Hi @jbjoret ,
I see that you are experiencing alignment issues with this printer you just received yesterday. You ran multiple calibrations with the same issue. I can help you out.
Print a Diagnostics Page to see if you have the same results. Trying to determine if it is a hardware or software issue.
Go to Setup, Reports, arrow down and select Diagnostics Report.
Here is a screen shot.
I have provided a document with more steps for running a cleaning and checking print driver settings.
Troubleshooting Print Quality Issues.
Make sure the paper type is selected to the media that you are using, not the default setting unspecified.
Please provide the following information so I can assist you better.
What were the results of Print Quality Page?
What are the Ink levels?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
I can send you that reset information in a private message.
In the forum beside your handle name just click on the envelope to view it.
Update the printer's firmware. Just to rule that out. HP LaserJet Pro 200 color Printer M251nw Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cold RESET For HP laserjet 200 color M251n

Similar Messages

Maybe you are looking for