ColdFusion 10 - install admin components

Hi,
I was just wondering if there were instructions around on how to install admin components for remote start & stop after installation of CF 10 has been completed?
I'm looking to update some development servers for use with ColdFusion Builder, but I can't find any information on how to install the component on linux after the fact.
I've searched through the installation guide, but haven't come up with anything.
Cheers,
Simon

Hi,
CF 10 is not supported on CentOS.
Please refer the Support Matrix:
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1 0/coldfusion10-support-matrix.pdf
Having said that, this can also be related to permissions that specific user is granted, with which CF 10 is being install. Make sure you have root privilidges and the install directory too has complete authority for the install to take place.
But we will still advice you to be on a supported environment for CF 10.
HTH.
Rg,
Spsb

Similar Messages

Installation of CS3 web premium failed to install shared components

Hi all ,
why is this installation so terrible even after two years of this product release!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! , I think adobe does'nt care to hear customers problems????
here is my scenario :
user rights : user with admin privileges .
few weeks back i had some issue with the operating system due to some office suite installation hence i had to format my pc . After formatting i tried to install my software's back , when i tried to install CS3 web premium it showed the following error
shared components failed to install
adobe cs failed to install
when i tried to open any of the successfully installed programs it said license stopped working
i tried all possible steps mentioned in various blogs and forums , here is a list of steps i tried
uninstalled the suite .
Installed windows clean up utility.
Downloaded the CS3 clean up script ran the same in all levels including the hidden levels 3 , 4..
Downloaded and ran the flash uninstaller.
disabled all services in the msconfig tab.
disabled all start up programs in the msconfig tab.
restarted the machine .
installed the suite again .
BINGGGGGGG same error shared components failed to install *********** .
*I also tried some postings regarding starting flexnet services in the services utility
What is the issue i have been struggling with this for past one week and its driving me mad....any help would be greatly appreciated .
~ Sam

In case anyone is still interested in this thread. I called Adobe tech support and they were able to help me finally get CS3 installed. The steps I took were kind of messed up because I'd try something and it still wouldn't work and then I'd try something else. But I think the following was the magic combination that finally worked. I don't know if this would help anyone else but it worked for me...
I uninstalled all the previously installed CS3 components. In fact, I uninstalled everything that started with the word "Adobe" on my computer, even Flash Player, just for good measure.
Then I ran the Adobe cleanup script at level 2
I downloaded the script from here...
http://www.adobe.com/support/contact/cs3clean.html
I went into the "computer" window and set it up to show hidden folders. Click Organize->Folder and Search Options->View. Then click "Show Hidden Files and Folders"
Then I went into C:\ProgramFiles\CommonFiles\Adobe and moved all the files in there to a folder on my desktop so there was nothing left in the Adobe folder (I don't think it wouldn't let me move some of the Acrobat files so the tech support guy said to just leave them)
I did the same thing for C:\ProgramFiles\Adobe and moved all those files to a folder on my desktop
Then I deleted all the files from C:\Users\MyUserName\AppData\Roadming\Adobe
I think I ran the cleanup script one more time just for the heck of it.
Next I went to the start menu and on the "Start Search" line I typed "msconfig." When the system configuration window came up, I went to the "services" tab and checked "Hide All Microsoft Services" Then I checked "Disable All" So that disabled everything that wasn't a MicroSoft service. Then I went to the "Startup" tab and checked "Disable All" and restarted the computer.
Then I went ahead and installed everything fresh off the CS3 DVD and it worked the first time. No more 1310 errors with the Config.Msi directory.
Hope this helps someone else.
Good luck!
Jenn

Photo shop cc ( failed to install) optional components failed (6)

Just purchased adobe creative and downloaded Photo shop CC. The program ran but the error( Photo shop cc ( failed to install) optional components failed (6) appeared at the end of install. I have Windows 8.1 and am running Norton 360. Can anyone help?

Hi myimagefactory,
Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.
You may also try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable norton 360 Antivirus software temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

SharePoint 2013 Foundation Search - Change the admin components to the new WFE server

Hi,
We tried to move the Search Service Application from one server to another server which was newly joined in the Farm.
In this case,the Search Service in my App server - which was working earlier also did not work. I tried almost all Powershell scripts to stop the service, and i could not make it.
Please let me know, how to stop the search service in both servers and to run only in the new server that i have joined.
Also, we need to move all Search Admin components to the new server, and from then Search Index should work only in the new server and not the old one.
Kindly let me know the possibility how can this be achieved.
Thanks in Advance!

Hi Karthikanandh,
If you want to stop the Search service in both servers and only run in the new server, then you can stop the service in Central Administration in both the two servers and start the service in new server.
Please go to Central Administration > System Settings > Manage service on server > change the server to the one that you need to stop the search service and then stop the search service.
To move the search admin component to another server, then you need to clone the active Search topology and move that component, and then then activate the topology and move the remaining components.
http://sharepoint.rackspace.com/sharepoint-2013-search-administration-tutorial
http://blogs.technet.com/b/pfelatam/archive/2013/05/10/create-a-search-topology-in-sharepoint-2013.aspx
http://technet.microsoft.com/en-us/library/jj862354.aspx#Search_Comp_Clone
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Service Deployment Fails on "Install VM components"

I've been having an issue trying to deploy a basic service. It fails on the "Install VM components" step. I'm using VMM 2012R2 and this originally happened with a Hyper-V host of Server 2008R2 and then again with Server 2012R2. The error is
Error (22042)
The service Base 2012 Test was not successfully deployed. Review the event log to determine the cause and corrective actions.
Recommended Action
The deployment can be restarted by retrying the job.
Error (12710)
VMM does not have appropriate permissions to access the Windows Remote Management resources on the server ( <HVserver>.<company>.com).
Unknown error (0x80338105)
Recommended Action
1) Ensure that the Windows Remote Management (WS-Management) service is running on the server (<HVserver>.<company>.com).
2) If the System Center Virtual Machine Manager service on your VMM management server is configured to run by using the machine account, ensure that there is not a group policy that does not allow adding machine accounts to a computer's Administrators group. If there is, you can use one of the following workarounds:
- Disable the group policy in Active Directory Domain Services (AD DS)
- Modify the group policy to allow the VMM machine account in the Administrators group
- Move the machine account to its own organizational unit (OU) and block the group policy from being applied
- Reinstall the VMM management server and choose the option to run the System Center Virtual Machine Manager service by using a domain account, and re-add all of your virtual machines.
VMM is running as system but the machine account was added to the administrators group for the Hyper-V server. There's no group policy that would prevent this and I can launch Powershell from from VMM server as System and "Enter-PSSession" to the
Hyper-V host as the machine account. I've also moved the Hyper-V host to an OU with no group policy just to rule anything out there and it still fails at the same spot.
Any suggestions on what I should try next?
EDIT: Also, I can deploy from a VM template fine, but it doesn't look like a VM template uses the "Install VM Components" step.

I was just able to get it working on mine on a VMMR2 Cluster (hyper-v on 2012 and 2012 R2 hosts with the same success) and the Service Template using a VM template with Server 2008R2 Enterprise. I don't know if you did the same steps but:
created a fresh VM in VMM - install Virtual Guest Services.
convert that VM to a VM Template - VMM then copies the VM files to a location on your VMM Library.
create Service template using the new VM template - with no services.
I've had problems in the past with trying to convert a VM to a template, and the VM would fail at the 'Fix up differencing disks' .. It wasn't until I did a fresh install instead of trying to convert a VM copy of a copy of a copy of a V2V migration..
Mine completes successfully but with an error couldn't install Virtual Guest Services when they are already installed. hmmm.. The VM/Service is running fine however.
---------------------------- Error I got -------------------------------
Error (13233)
Unable to install Virtual Guest Services on virtual machine TEST_SERVICE. The Hyper-V Integration Services setup exited with error code 60001.
Recommended Action
For more information, refer to the Hyper-V documentation for virtual machine integration services at
http://go.microsoft.com/fwlink/?LinkId=118036 and then try the operation again.

Is it possible to install admin tool alone in windows 7 64 bit software

hi,
is it possible to install admin tool alone in windows 7 64 bit software. if so please let me knw where to get the software.thanks in advance

Aswin,
Yes, it is possible.
You may download the Oracle bi 11g client tools here,
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
...you'll simply need the Oracle Business Intelligence Developer Client Tools Installer (11.1.1.5.0)
Please award points if this was helpful or the correct answer to your question.

How to find the installed oracle components( oci , occi) versions?

Hi,
could you please help me to find out the version of installed oracle components?
ex: which version of OCCI installed?
one way is using OUI gui tool.
I also got this info from oracle inventory file.
under $ORACLE_HOME/inventory/ContentsXML/comps.xml
But is there any best way or command to look for the same.
Thanks,
Krish

The "best way" almost certainly depends on why you're looking for the information and what tool(s) you're using.
If you're asking a human being to get the information, the OUI is generally going to be "better". If you're writing a program to get the information, parsing the inventory XML is likely to be "better".
If you have multiple Oracle Homes on a single machine (particularly Oracle Homes with different major Oracle releases), though, or you have various failed/ incomplete/ obsolete installations on various machines, or if you're trying to figure out which version of the libraries would actually get used when a particular application starts up (assuming there are multiple applications on the machine), things start to get rather trickier.
Justin

Install Admin Server as a Service

We are using:
WLS - 10.3.6 (64 bit)
SOA- 11.1.1.7
Windows Server 2008 R2 64 bit
When I try to install Admin server as a service, I run into errors with the values assigned to java.protocol.handler.pkgs. The script generates a value of:
oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol
the error that is thrown is:
'"oracle.fabric.common.classloaderurl.handler"' is not recognized as an internal or external command, operable program or batch file.
Running the StarrtWeblogic script, has this same parameter and value and of course this works fine, however as part of the Install it does not.
I have read/tried some of the solutions on the Internet; however I have not yet found something that works.
How best to resolve this.
Thank you
Jon

Okay, so the work around that I found that worked was to install one of the protocols - oracle.mds.net.protocol, then run the script. The service was added successfully. The next step was to edit the regsitry settings, find the entry for the service and manually add the entries to the cmdline. This worked and I ended up with something that worked. I am still looking for a better way to get this to work. The issue here is that I have to document how to build out an environment and dcoument so that others can do it on their own. I am not comfortable with the, editting registry settings. (not that I like doing it as well).

New Deployment: SE: Installing Lync Components Error Installing OcsMcu.ms

New SE Lab Deployment: 1 Windows 2008 DC, 1 x 2008 R2 Lync Server.
I get the following error when going through the Installing Lync Components Process:
Error returned while installing OcsMcu.msi(ASMCU), code 1603. Please consult log at C:\Users\Nav\AppData\Local\Temp\Add-OcsMcu.msi-ASMCU-[2012_11_20][20_13_58].log
The events show the following:
Product: Microsoft Lync Server 2010, Conferencing Server -- Error 27761. Error 0x80070002 (The system cannot find the file specified) granting access to 'RTC Component Local Group' on MACHINE\SYSTEM\CurrentControlSet\Services\MediaPerf\Performance\Parameters
performance counters.
How do I get past this error?

I have tried to run this package manually from the disk.
It starts the installation then during the early stages of the install i get the error message asking me to insert the disk.
When I try and install seperate components i get the following error message:
Product: Microsoft Lync Server 2010, Conferencing Server -- Error 27761. Error 0x80070002 (The system cannot find the file specified) granting access to 'RTC Component Local Group' on MACHINE\SYSTEM\CurrentControlSet\Services\MediaPerf\Performance\Parameters
performance counters.

Install db components

Hello all
Can You help me , where I can find (link) steps to install fb components like :
XDB, XML , OLAP .... It is some general link to find all this steps ?
thank You Brano

http://www.oracle.com/technology/documentation/index.html
You can search here.
Adith

Cannot install Selenium Components for Cross Browser Testing extension from Visual Studio 2013

Hello,
I am having some issues with installing Selenium Components for Cross Browser testing. I keep getting this error everytime. Yes, Visual Studio 2013 has been registered with a product key. However, I cannot seem to bypass this error. I tried to install
from http://visualstudiogallery.msdn.microsoft.com/11cfc881-f8c9-4f96-b303-a2780156628d and from Tools->Extensions and Updates from Visual Studio 2013. It just does not work. I have a copy of Visual Studio 2013. Yes, I already have Visual Studio
2012 Ultimate and Visual Studio 2013 Ultimate installed on my machine. What am I missing?

Hi Antwan,
Please uninstall the VS, then reinstall it.
On the other hand, this issue is in the extension, I suggest that you should post it in
Selenium components for Coded UI Cross Browser Testing site for efficient response. (Q AND A)
Thanks
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ThinInstaller doesn't install all components

Hi there
I have a problem using ThinInstaller in combination with SCCM. I downloaded a few components using UpdateRetriever for the ThinkPad T450. During a SCCM Task Sequence a install those components using the following command:
"%ProgramFiles(x86)%\ThinInstaller\ThinInstaller.exe" /CM -search A -action INSTALL -repository "\\UNC\PATH$" -noicon -includerebootpackages 1,3,4 -noreboot -log "C:\Temp\ThinInstaller.log"
This works without any problems, but the WiFi and the Intel Management Engine Interface Drivers don't get install. Those two components have the same state than all other drivers in Update Retriever.
If i manually install those two Installer from my UpdateRetriever Share it works without any problems. Does anyone know why this occurs?
Thanks!

Intel has changed the design of their Intel MEI driver package so that it apparently will not install in a scripted manner running under Local System. I bet if you check the log file from ThinInstaller you will see that it got a 1603 return code when it ran the Intel MEI installer. I've seen others run the SetupME.exe from that package with a -extract command line parameter and get the MSI files. If you are not using the AMT features in your environment, you can get the two driver-only MSI files for SOL and MEI and add those in SCCM as an MSI package and that seems to install fine.
For WiFi, I believe a new driver was recently made available. You may want to search again in UR and make sure you have the right package. Also, if it is the Intel 7265 you need to install, the Intel Wireless 7265/3160 has a co-requisite dependency on the Intel 7265 Bluetooth Driver (j5b206ww_764). You need to also have this package in your repository. Other than that we would have to go through the TI log file to see why it did not install.

Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

Just installed today Acrobat XI standard on PC w Windows 7, did use the Typical installation but now would like to install all components. What shall I do ? T y

restart installation and pick whatever options you want to install.

ColdFusion Builder Admin Server Components Problem

After downloading the admin server components, extracting them into their appropriate directories, and executing the adminstart.bat file, I'm receiving the following error:
This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem.
I did a search for that file and found several instances throughout the coldfusion8 directory.
I am running Coldfusion Standard 8,0,1,195765 on Windows 2003.
Thoughts?

I have started it using the adminstart.bat file.
Starting Macromedia JRun 4.0 (Build 108673), admin server
07/14 08:52:39 warning Unable to open C:\ColdFusion8\runtime/lib/license.properties
07/14 08:52:40 info JRun Naming Service listening on *:2910
07/14 08:52:40 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
07/14 08:52:40 info JRun Web Server listening on *:8000
07/14 08:52:40 info Deploying enterprise application "JRun 4.0 Internal J2EE Components" from: file:/C:/ColdFusion8/runtime/lib/jrun-comp.ear
07/14 08:52:40 info Deploying EJB "JRunSQLInvoker" from: file:/C:/ColdFusion8/runtime/lib/jrun-comp.ear
Server admin ready (startup time: 3 seconds)
Think the problem has to do with the second line...shouldn't that be "security.properties"?

Coldfusion 9, Admin server won't start anymore...

We have installed yesterday updates for Windows 2008 R2, but know Adobe Admin server doesn’t start anymore.
The Macromedia JRun CFusion Server service could not be started. Check the server "cfusion" log files for more information.
What to do know?
We running Coldfusion 9.
In the logs I see the following:
Starting Macromedia JRun 4.0 (Build 108795), admin server
11/02 01:44:51 info JRun Naming Service listening on *:2910
11/02 01:44:53 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
11/02 01:44:53 info JRun Web Server listening on *:8000
11/02 01:44:53 info Deploying enterprise application "JRun Management Console" from: file:/C:/JRun4/servers/admin/jmc-app.ear
11/02 01:44:53 info Deploying web application "JRun Management Console" from: file:/C:/JRun4/servers/admin/jmc-app.ear
11/02 01:44:54 user JSPServlet: init
11/02 01:44:55 info Deploying enterprise application "JRun 4.0 Internal J2EE Components" from: file:/C:/JRun4/lib/jrun-comp.ear
11/02 01:44:55 info Deploying EJB "JRunSQLInvoker" from: file:/C:/JRun4/lib/jrun-comp.ear
Server admin ready (startup time: 8 seconds)
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
Error: Exception thrown by the agent : java.rmi.server.ExportException: Listen failed on port: 8701; nested exception is:
                java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind

It looks like there was a problem during initial deployment, in the log you posted it indicates a resource failed to get created by the XACML authorization provider, it would seem you are out disk space:
ou=Policies,ou=XACMLAuthorization,ou=myrealm,dc=prismaDomain' MODIFY to Transaction Log: No space left on device>
####<Jan 9, 2008 11:10:44 AM WIT> <Error> <Security> <arspapp2> <prismaAdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1199851844413> <BEA-090064> <The DeployableAuthorizer "myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl" returned an error: weblogic.security.spi.ResourceCreationException: [Security:090310]Failed to create resource.>
Jeff

ColdFusion 10 - install admin components

Similar Messages

Maybe you are looking for